1 Issued January 2015

Safety Advisor & Engineer Curriculum Vitae of Barry Murphy

PERSONAL DETAILS: Full Name: Peter Barry Murphy Date of Birth: 16TH March 1970 Status: Married

Postal Address: 16 Castle Park, Piercestown, Co. Wexford, Ireland Telephone: +353 (0) 86-8133374

E-mail: murphybarry@eircom.net https://www.linkedin.com/pub/barry-murphy/14/797/324

EDUCATION & ACADEMIC: 1983 - 1988: C.B.S, Wexford. - Intermediate & Leaving Certificate

1988 - 1990: Waterford R.T.C - N.C.E.A Certificate in Mechanical Engineering [Hons.]

1990 - 1993: D.I.T Bolton St. - Diploma (Engineering) & Bachelor of Science (Degree) Engineering, Mechanical (Hons.)

DETAILS OF HEALTH, SAFETY & ENVIRONMENTAL TRAINING & QUALIFICATIONS:

Description of Qualification Level Issued by Date

Ordnance, Munitions and Explosives (OME) Safety Awareness I to IV Certificate Cranfield University - Shrivenham In progress

OPITO Authorised Gas Tester Certificate OPITO 2014

Bowtie Risk Analysis Certificate IQMS, Bristol, UK. 2014

OSHAS 18001 Lead Auditor Course Certificate CGE Risk Management Solutions 2014

Drilling Rigs; Rig Inspections Certificate Aberdeen Drilling Consultants &

Scottish Qualifications Authority 2014

International General Certificate in Occupational Health and SafetyN1 Certificate NEBOSH 2014

Drilling Equipment – Understanding, Inspections & Faults Certificate Aberdeen Drilling Consultants &

Scottish Qualifications Authority 2014

Oil & Gas Safety Management Certificate OSHA Academy 2014

ISOS Malaria Training Certificate ISOS – Tullow Oil plc 2014

OGUK Cargo Handling (Best Practices), Lifting Equipment Controls &

Operations Procedures and Rigging & Lifting Certificate North Sea Lifting 2013

Explosion Safety Management Certificate IOSH 2013

Understanding Dropped Objects

Understanding Well Control Certificate Aberdeen Drilling Consultants 2013

Incident Investigation Training Certificate Maritime Environmental Training

Institute 2012

Incident Investigation – Principles & Investigation Techniques [RoSPA

accredited] Certificate Human Focus 2012

Behavioural Safety in Industry [RoSPA accredited] Certificate Human Focus 2012

EMS and Environmental Auditing Certificate SQT Training Ltd 2011

Effective Scaffold Management & Scaffold Inspections Certificate Safety Solutions 2011

Excavation & Trenching, Fall Protection, Fire Prevention, LO-TO,

Hydrogen Sulphide Safety, Oil Rig Safety, Spill Prevention, Contingency

and Countermeasures.

Certificate Safetyskills Oil & Gas Safety 2011

Food Hygiene in Catering Certificate Imperative Training 2011

Train the trainer (level 6) Certificate FETAC 2009

VDU/DSE & Workstation Assessor Certificate NIFAST 2009

Manual handling Instructor Course – Inanimate Objects and

Patient/People Moving Certificate Intelligent Health Systems 2009

ATEX (Explosive Atmospheres) Regulation Certificate SQT Training Ltd 2008

Lifting Equipment Inspection Certificate Lloyds British Training 2007

Training & Development Instructor Certificate Irish Institute of Training &

Development 2007

COSHH & Safe Working with Chemicals Certificate NIFAST 2004

Excavation & Shoring Safety Certificate Shorcontrol Safety Ltd 2003

Managing Safely in Construction Certificate IOSH 2003

Inspector & Instructor for Personal Fall Arrest Equipment Certificate Bacou Dalloz (Troll) 2003

Abrasive Wheels Instructor Certificate Pass International 2003

Mobile Elevated Work Platform Inspector & Instructor Certificate Pass International 2003

General Occupational Health & Safety (120hr course) Certificate JMJ / Intel Ireland 2002

2 Issued January 2015

SYNOPSIS OF SOME PREVIOUS PROJECTS AND EXPERIENCES:

Project: Tullow Kenya BV Role: Well Engineering EHS Advisor Timeline: September 2014 to Present.

Project Description: Well Engineering EHS Advisor to the Well Engineering team supporting day to day activities with four drilling rigs from different contractors; three drilling and one on Wells Completions and Testing. With a direct reporting line to the Wells Delivery Manager the role involves the following:

To monitor and supervise the implementation of Tullow Oil policies and procedures on all field operations sites for drilling and related activities such as site civil preparation, rig camps.

To provide direct EHS support and guidance to the Well Engineering team in relation to drilling and associated activities with a focus on:

o EHS component of ITT specifications & evaluation o Contractor Audits & Reviews o Pre-mobilisation planning, including Contractor on-boarding, production of EHS MS interface/bridging documents, EHS

plans etc. o Operational Support and post well lessons learnt

Project: Tullow Ethiopia BV Role: EHS Superintendent Timeline: June 2012 to July 2014.

Project Description: On site EHS Superintendent engaged to ensure compliance and support of the client’s EHS Management Systems, with Tullow Oil personnel and contractors on a four wildcat well land-based programme. Participation in the following areas:

Drilling operations including rig down, relocation and rig up with facilities support.

Construction; remote airstrips, camps, road & rig pad construction.

Heavy, non-routine and complex lifting operations and SimOps

Site & Safety Management System Audits and Inspections

Contractor EHS evaluations, on-boarding, training, audits, on-site monitoring & coaching. Site decommissioning and restoration.

Compiling & Evaluating EHS Documentation; Rig HSE Case, Explosion Safety Management (ATEX), EHS Project Plans, Electrical Safety Plan, Land Transport Procedures, Environmental & Waste Management Plans, EHS Bridging Plans, Emergency Response Plans, Dropped Object Prevention Plans etc.

Project: Tullow Kenya BV Role: EHS QC Timeline: June 2011 to June 2012

Project Description: On site EHS Quality Control for the client on various Land, Airborne & Bathymetric Seismic Surveys in Kenya. Ensuring compliance and support of Tullow Oil Kenya EHS Management Systems, with Tullow Oil personnel and assigned contractors. Providing EHS QC assistance and support for both Tullow Oil and contractor management in compliance of Contract and Tullow Oil EHS Management Systems

Project: Tullow Ethiopia BV Role: EHS QC Timeline: April + May 2011

Project Description: On site EHS Quality Control for the client on various Land Seismic & Airborne FTG surveys in Ethiopia. Ensuring compliance and support of Tullow Oil Ethiopia EHS Management Systems, with Tullow Oil personnel and assigned contractors. Providing EHS QC assistance and support for both Tullow Oil and contractor management in compliance of Contract and Tullow Oil EHS Management Systems.

Project: Tullow Uganda BV Role: EHS QC Timeline: October + November 2010.

Project Description: On site EHS QC for the client on their 2D & 3D Land Seismic Survey, Uganda. Ensuring compliance and support of Tullow Oil Uganda EHS Management Systems, with Tullow Oil personnel and assigned contractors. Providing EHS QC assistance and support for both Tullow Oil and contractor management in compliance of Contract and Tullow Oil EHS Management Systems. Whilst in Kenya I was part of the EHS team that assisted the land seismic contractor achieve in excess of one million work hours without an LTI.

Project: New Terminal 2, DAA Role: H&S Advisor with M&E Contractor Timeline: Oct 2008 to Sept 2009

Project Description: Ensuring the day-to-day health, safety, welfare and environmental compliance of the contractors’ through-out the scope of works to DAA & legislative requirements. Main focus on M&E systems during install and commissioning. Working with main and sub-contractors for the DAA on preparing SOP’s, LOTO systems, Residual Risk Analysis, etc.

Project: Green Bio Fuels Ireland Ltd Role: Lead Safety Advisor Timeline: March 2007 to Sept 2008

Project Description: Equipment install and commissioning of bio-diesel production facility capable of producing 34m litres of biodiesel per year conforming to EN 14214. Project involved process steam boilers, nitrogen storage & purging systems, bulk storage & bunding of chemical and biodiesel tanks, equipment & process piping fit out of an Ex-rated process hall, explosion protection & systems controls, bi-products storage silos, laboratory equipment and exothermic reaction vessels, alarming and monitoring systems, dry cooling towers, hoppers etc.

Project: Richfield Windfarm, Ireland Role: Lead Health & Safety Co-Coordinator Timeline: Jan 2006 to March 2007.

Project Description: Installation and commissioning of 27MW Windfarm comprising of 18 GE 1.5MW wind turbines for the client on reclaimed lands, sensitive to environmental impact. Involved in the install, commissioning and operation health & safety and environmental controls for the facility. Project involved heavy and tandem lifts, deep CFA piling, electrical hook-up and transformer installations, liaising with the O.P.W and Irish E.P.A on environmental issues, plant and equipment safety and compliance. Also responsible for developing plant and equipment inspection and operation protocols and documentation.

N-1 Course completed, IGC3 submitted; awaiting written IGC1 & 2 exam and off-rotation date compatibility.

3 Issued January 2015

OTHER PROJECTS:

Project : Endesa Ireland Role : Auditing Team Leader

Project Description: Undertake an extensive work equipment and systems audit at the power generating and peaking

stations in conjunction with SGS Ireland. Compile, issue and presentation of the final report to the

Endesa management team.

Aug. '98 to April '99 : Wahlco Engineered Products Ltd, Broombank Park, Sheepsbridge, Chesterfield, UK Position : Project & Safety Engineer Role: Project team engineer for developing & enforcing site safety programmes to H.S.E requirements & safe work methods for the design, fabrication and site supervision of the installation of back end equipment for Power Generation Plants. Compiling site method statements, equipment I.O.M.C manuals/documentation. This role also involved a substantial portion of multi discipline sub-contractor HSE management and coordination.

Jan. ’95 to July ’98 : Wahlco Engineered Products Inc, 29 Lexington St., Lewiston, Maine 04240, USA. Position : Project & Safety Engineer Role: Project team engineer for developing & enforcing site safety programmes to H.S.E requirements & safe work methods for the design, fabrication and site supervision of the installation of back end equipment for Power Generation Plants. Compiling equipment installation, operation, maintenance and commissioning documentation and user safety manuals formed an integral part of this role as did multi discipline sub-contractor HSE management. Worked on projects in India, Vietnam, Canada, Pakistan, Korea as well as the contiguous USA.

REPORT WRITING & COMPUTER LITERACY:

Excellent report writing skills with a high degree of proficiency in MS Word, Excel, PowerPoint and Emex. Experience in tender evaluations, compliance monitoring and compiling technical reports. Previous experiences also in developing scope of works and contract documents. Well versed in the undertaking of contractor audits, implementing and monitoring of corrective actions. Ability to complete pre-mobilisation planning, including contractor on-boarding, interface and bridging documents, etc. Excellent ability to compile and deliver interactive EHS inductions and training packages.

PERSONAL NOTE & SUMMARY:

In my tenure as an environmental, health, safety and welfare officer, progressing to freelance consultant in 1997, I have had exposure to all manner of industries and technologies. In the last decade my original mechanical engineering background has eased the transitioning into the more technical aspects of EHS. Having worked as an EHS practitioner in both the Oil & Gas and the PowerGen industries I have had hands on experience with many of the facets of EHS in varying environments and locations.

I have a firm belief in the hands on approach, continuous coaching for employees, contractors and management alike and in seeing a project out to its finality. Continuous Professional Development is a must and it is something I am driven to continue.

References are best sought through management, co-workers and client or contractor representatives. For those that require them, I am more than willing to provide a selection of contact details for the aforementioned should the need arise.