Upload
ngoduong
View
235
Download
1
Embed Size (px)
Citation preview
- A CUBIC subsidiary
CUBIC/Stanfo is the perfect solution not-withstanding the need is a customised solution, a junction box or a standard panel.
We are continuously improving all pro-cesses in order to meet every need and wish - not only today, but also in the future.
When it comes to standard and customised solutions, our products are high-quality. We guarantee the same quality whichever the order size, as well as homogeneous future orders.
Customised solutions and stainless standard enclosures
Customised and stainless
2
Customised solutions
Identification of needsNeeds and wishes differ! We are extremely aware of that. Therefore, we appreciate a close co-operation with our customers at the time of construction and design making it possible for our customers to benefit from our know-how, and thus ensure the customers the very best solution. In relation to development and construction of the enclosure we offer 3D visualisation.
CUBIC/Stanfo’s customised solutions are found in all feasible environments and industries. The solutions are mainly used within train service, transport, pharmaceutical, food processing, electronic and windmill industries as well as offshore. I.e. industries where production or the surroundings are of such nature that special demands are made to the enclosure of the electrical control systems etc. We deliver quality and unique solutions - from concept to the finished product.
At CUBIC/Stanfo we are very conscious that continuous product development, control and the possibility of customised solutions are decisive parameters, when future solutions are chosen. We manufacture individual solutions with regard to material, design, colour and density. We supply ready to use products with no need for further holes or cutouts.
Based on this we have high demands to our employees, so the customer’s wishes may quickly be converted to a complete and up-to-date product. We have sophisticated and modern CNC equipment as well as welding and bending robots at our disposal.
Ongoing investments in our production facilities, improving and maintaining the employees’ qualifications make it feasible to mass-produce even large high-quality customised solutions at competitive prices. Our production is well-documented, flexible and quickly adaptable - which apart from a quick delivery means absolute uniformity at reordering.
3
Customised solutions
AtSealingsAt CUBIC/Stanfo we offer two types of sealings in our customised solutions. Our customers may select between a rubber double sealing or a PUR sealing.
For the CUBIC/Stanfo ATEX solutions the seal-ing for KLM products is IP66 approved, and for the STA products it is IP69K approved.
SegmentsCUBIC/Stanfo’s customised solutions are found in all industries and environments, where high quality and finish is a demand - indoor as well as outdoor.
CUBIC/Stanfo’s solutions are i.a. applied within the segments: • Medical/pharmaceutical industry• Food industry• Infrastructure• Wind• Offshore• Marine• Automotive • Process industry• Outdoor• Telecommunication
Quality & finishAt CUBIC/Stanfo we offer the same high quality regardless of the product - time after time. Our quality is exquisite, but we provide the opportunity of adapt-ing the finish of the enclosure to match the application of the product. We offer 3 levels of finish. Standard, standard+ and standard++.
A silicone sealing is applied for the ATEX solutions.
Appearance CUBIC/Stanfo’s customised solutions are available in a powder painted or stainless steel version. The stainless steel is available in either EN 1.4301 / AISI 304 steel or acid-resistant EN 1.4404 / AISI 316L steel.
4
Enclosures for explosive environments - ATEX and IECEXThe
CUBIC/Stanfo’s KLM and STA enclosures are available in two versions. - U certificate (component certificate) is an empty enclosure, however for the STA enclosure inclusive of a mounting plate.- X certificate (product certificate) including clamps.
Both enclosures can be delivered in EN 1.4301 / AISI 304 or EN 1.4404 / AISI 316L with or without a flange plate.
Identification in accordance with 94/9-EC (ATEX):II 2G Ex e ia IIC T6 GbII 2D Ex tb ia IIIC IP66 T85°C Db
Identification in accordance with IECEx Scheme:Ex e ia IIC T6 GbEx tb ia IIIC IP66 T85°C Db
The CUBIC/Stanfo KLM and STA enclosures are Ex approved for permanent installations in zone 1 and 2 in accordance with EN 60079-10-1 or in zone 21 and 22 in accordance with EN 60079-10-2.
Marking according to 94/9-EC (ATEX):II 2G Ex e IIC GbII 2D Ex tb IIIC IP66 DbMarking according to IECEx Scheme:Ex e IIC GbEx tb IIIC IP66 Db
5
Tests
UL - approvalsUL Type 1, 3R, 4 and 4X for the standard programme and customised enclosures without any limitation to the outer geometry, shape and depth is available.
IPX6 - density The approval includes the entire standard programme. The test result is also valid for panels with a window construction.
IP69KTest carried out with 100 bar pressure and 80 degr. hot water.
It is essential for CUBIC/Stanfo to offer documented solutions to our partners, which fulfil all wishes and demands. This also ap-plies to tests. CUBIC/Stanfo therefore offer pretested solutions, which cover almost all needs.
Type KLM KKS STA STB GLV HYG OBR CustomisedUL • • • • •
UL recogized • IP69 • • • • • IP65 • IP69K • • • • • • (*)EMC • Ageing test • • • • • Impact • • • • • Thermo test • • ATEX • •
(*) Not valid for all types
6
CUBIC/Stanfo offers the widest and most versatile programme of stainless and painted standard solutions in the market, and all products are characterised by professional workmanship and internal dimensions beyond the market standards.All products are available in either stainless EN 1.4301 / AISI 304 or EN 1.4404 / AISI 316L, and painted ST37 steel.
The CUBIC/Stanfo standard programme is delivered with PUR sealing as a standard. The flexibility and focus on meeting our cus-tomers’ demand is paramount, and therefore all standard products are available with a double sealing. Standard products with a double sealing are not kept in stock.
The standard programme in stainless steel is a stock item, and therefore we offer day to day delivery.
The standard programme is density certified and approved according to IP69K, UL Type1, 3R/4 and 4X.
It is a key issue to get a full benefit from the customers’ competitive position. All standard products are therefore available in pre-cisely the finish demanded by the end user - depending on the line of business. There are 3 levels of finish - a standard version, a standard + and a standard ++. The quality is uncompromising, regardless of the finish.
CUBIC/Stanfo supplies a completely ready for delivery product with no need for further finishing. This means that all products from the standard programme come with extra holes or cutouts - depending on the customer’s demands. Cutouts come with no extra charge.
CUBIC/Stanfo’s customised solutions are found in all industries and environments.
Standard programme
7
Type No.TLB-2950 set of 2 mounting rails for DIN rail
TLB-3280 for KLM-2020XX
TLB-3281 for KLM-2030XX
TLB-3282 for KLM-2040XX
TLB-3283 for KLM-2050XX
TLB-3284 for KLM-1520XX
TLB-3285 for KLM-2025XX
TLB-3286 for KLM-2560XX
TLB-3287 for KLM-2540XX
TLB-3289 for KLM-1530XX
Type No. H x W x D mmKLM-101060-600 100x100x60
KLM-101080-600 100x100x80
KLM-101560-600 100x150x60
KLM-102060-600 100x200x60
KLM-102560-600 100x250x60
KLM-151510-600 150x150x60
KLM-151580-600 150x150x80
KLM-152060-600 150x200x60
KLM-152010-600 150x200x100
KLM-152014-600 150x200x140
KLM-153010-600 150x300x100
KLM-154010-600 150x400x100
KLM-155010-600 150x500x100
KLM-202012-600 200x200x120
KLM-202514-600 200x250x140
KLM-203012-600 200x300x120
KLM-204012-600 200x400x120
KLM-205012-600 200x500x120
KLM-254015-600 250x400x150
Stainless junction box, type KLM, is available in a wide selection from 100x100 mm to 700x250 mm, and is manufactured in various depths. KLM is prepared for earthing, threaded rods are pre-mounted in the box, and mounting plates are accessories.Mounting brackets for the door are outside the sealing to ensure efficient tightness.The boxes are made of 1.5 mm plate, EN 1.4404 / AISI 316L and with a mat ground outer finish as a standard. KLM 1.5 mm ATEX EX e version on requestApprovals: IP69K, UL type 1, 3R, 4x and Exe.
Mounting plates - KLM, galv. 2 mm
Junction boxes - KLM
8
Type No. H x W x D mm Type
30 degr. lid:KKS-151512-130 150x150x120 AISI304
KKS-202012-130 200x200x120 AISI304
KKS-303016-130 300x300x160 AISI304
KKS-404016-130 400x400x160 AISI304
45 degr. lid:KKS-151512-145 150x150x120 AISI304
KKS-202012-145 200x200x120 AISI304
KKS-303016-145 300x300x160 AISI304
KKS-404016-145 400x400x160 AISI304
Stainless junction box, type KKS, is available with a variety of lid versions and depth dimensions.KKS is a hygienic box for the food and medical industries. KKS has no horizontal surfaces at the top of the enclosure. The service-friendliness is first class, as the lid can be removed, and the components may be reached from both top, sides and front.The slanted surfaces make the box optimal in dusty environments. May be mounted with hygienic distance pieces, TLB-01028.The boxes are as a standard made of EN 1.4301 / AISI 304. On request also available in EN 1.4404 / AISI 316L.Approvals: IP65.
Junction boxes - KKS
Type No. H x W x D mmSTA-302516-100 300x250x160
STA-304016-100 300x400x160
STA-401030-100 400x1000x300
STA-403020-100 400x300x200
STA-404022-100 400x400x220
STA-406022-100 400x600x220
STA-406030-100 400x600x300
STA-406035-100 400x600x350
STA-501030-100 500x1000x300
STA-504022-100 500x400x220
STA-505022-100 500x500x220
STA-508030-100 500x800x300
STA-601030-100 600x1000x300
STA-604022-100 600x400x220
STA-604035-100 600x400x350
STA-606022-100 600x600x220
STA-606035-100 600x600x350
STA-707022-100 700x700x220
STA-806022-100 800x600x220
STA-806030-100 800x600x300
STA-806035-100 800x600x350
STA-808022-100 800x800x220
STA-808030-100 800x800x300
STA-108022-100 1000x800x220
STA-108030-100 1000x800x300
STA-101030-100 1000x1000x300
STA-126030-100 1200x600x300
STA-128030-100 1200x800x300
STA-121030-100 1200x1000x300
STA-121240-100 1200x1200x400
Stainless mounting enclosure, type STA is manufactured in versions from 300x250 mm up to 1200x1200 mm and with a variety of depths. It is made of 1.5 mm plate, and is available with a mat ground outer finish as a standard. The boxes are as a standard made of EN 1.4301 / AISI 304. On request also available in EN 1.4404 / AISI 316L.Approvals: IP69K, UL type 1, 3R, 4x, EMC and Exe.
On request:STA 1.5 mm ATEX EX e version STA 1.5 mm AISI 304 = -105 (with 5º HYG top)STA 1.5 mm AISI 304 = -130 (with 30º HYG top and drip cap)
9
CUBIC/Stanfo HYG enclosure.HYG enclosures are available with 5º HYG top or 30º HYG top and drip cap.
Mounting enclosures - STA
10
Stainless mounting cabinet, type STB is a stronger version of STA, and is manufactured in a variety of depths up to a size of 2000x1600 mm.The cabinet is made of 2.0 mm EN 1.4301 / AISI 304 and with a mat ground outer finish as a standard.The cabinet is mountable on a floor base.Approvals: IP69K, UL type 1, 3R, 4x.
Type No. H x W x D mmSTB-101030-100 1000x1000x300
STB-101040-100 1000x1000x400
STB-101240-100 1000x1200x400
STB-121030-100 1200x1000x300
STB-121040-100 1200x1000x400
STB-121230-100 1200x1200x300
STB-121240-100 1200x1200x400
STB-148040-100 1400x800x400
STB-141030-100 1400x1000x300
STB-141040-100 1400x1000x400
STB-141240-100 1400x1200x400
STB-168040-100 1600x800x400
STB-161040-100 1600x1000x400
STB-161240-100 1600x1200x400
STB-161250-100 1600x1200x500
STB-161640-100 1600x1600x400
Doors w/window - STA
Type No.TLB-1110 for STA-302516
TLB-1111 for STA-304016
TLB-1112 for STA-404022
TLB-1113 for STA-4060XX
TLB-1114 for STA-6040XX
TLB-1115 for STA-505022
TLB-1116 for STA-6060XX
TLB-1117 for STA-8060XX
TLB-1118 for STA-8080XX
TLB-1119 for STA-1080XX
Stainless instrument plates - STA INS
Type No.TLB-1210 for STA-302516
TLB-1211 for STA-304016
TLB-1212 for STA-404022
TLB-1213 for STA-4060XX
TLB-1214 for STA-6040XX
TLB-1215 for STA-505022
TLB-1216 for STA-6060XX
Mounting cabinets - STB
11
Stainless floor cabinet type GLV is available with the dimensions 2000 mm high and 400, 600, 800 and 1200 mm wide as a standard. For all versions the depth is 400, 500 or 600 mm. The cabinet consists of: A standard cabinet, fully welded frame with open sides and bot-tom, a mounting plate and a door. The cabinets are manufactured of EN 1.4301 / AISI 304 and with a mat ground outer finish as a standard. Extra mounting plates, cable floor plate, base etc. are available as accessories. More cabinets can be supplied on a common base. Approvals: IP69K, UL Type 1, 3R, 4X.
Type No. H x W x D mmGLV-204040-100 2000x400x400
GLV-206040-100 2000x600x400
GLV-208040-100 2000x800x400
GLV-201240-100 2000x1200x400
Side walls (1 set of 2 pcs.)TLB-3240-100 for GLV-20XX40
Partition wallsTLB-3241-100 for GLV-20XX40
Base, height 100 mmTLB-3311-100 for GLV-204040 On request
TLB-3312-100 for GLV-206040
TLB-3313-100 for GLV-208040
TLB-3314-100 for GLV-201240 On request
Base, height 200 mmTLB-3331-100 for GLV-204040 On request
TLB-3332-100 for GLV-206040 On request
TLB-3333-100 for GLV-208040
TLB-3334-100 for GLV-201240
Bottom platesTLB-3711-100 for GLV-204040
TLB-3713-100 for GLV-208040
TLB-3714-100 for GLV-201240
Cable bottom platesTLB-3721-100 for GLV-204040
TLB-3722-100 for GLV-206040
TLB-3723-100 for GLV-208040
Type No. H x W x D mmSTB-161650-100 1600x1600x500
STB-188040-100 1800x800x400
STB-188050-100 1800x800x500
STB-181040-100 1800x1000x400
STB-181240-100 1800x1200x400
STB-181640-100 1800x1600x400
STB-208040-100 2000x800x400
STB-201040-100 2000x1000x400
Floor cabinet system - GLV, D = 400 mm
11
12
GLV-204050-100 2000x400x500
GLV-206050-100 2000x600x500
GLV-208050-100 2000x800x500
GLV-201250-100 2000x1200x500
Side walls (1 set of 2 pcs.)TLB-3250-100 for GLV-20XX50
Partition wallsTLB-3251-100 for GLV-20XX50
Base, height 100 mmTLB-3321-100 for GLV-204050
TLB-3322-100 for GLV-206050
TLB-3323-100 for GLV-208050
TLB-3324-100 for GLV-201250
TLB-3351-100 for GLV-204050
Base, height 200 mmTLB-3341-100 for GLV-204050
TLB-3342-100 for GLV-205050
TLB-3343-100 for GLV-208050
TLB-3344-100 for GLV-201250
Bottom platesTLB-3715-100 for GLV-204050/60
TLB-3716-100 for GLV-2060XX
TLB-3717-100 for GLV-208050/60
TLB-3718-100 for GLV-201250
Cable bottom platesTLB-3725-100 for GLV-204050
TLB-3726-100 for GLV-206050
TLB-3727-100 for GLV-208050
TLB-3728-100 for GLV-201250
Side mounting plates (galv. steel)TLB-3272-100 for GLV-20XX50
Floor cabinet system - GLV, D = 500 mm
Type No. H x W x D mm
Type No. H x W x D mm
Floor cabinet system - GLV, D = 600 mm
GLV-204060-100 2000x400x600
GLV-206060-100 2000x600x600
GLV-208060-100 2000x800x600
Side walls (1 set of 2 pcs.)TLB-3260-100 for GLV-20XX60
Partition wallsTLB-3252-100 for GLV-20XX60
Base, height 100 mmTLB-3352-100 for GLV-206060
TLB-3353-100 for GLV-208060
TLB-3354-100 for GLV-201260
Base, height 200 mmTLB-3361-100 for GLV-204060
TLB-3362-100 for GLV-206060
TLB-3363-100 for GLV-208060
TLB-3364-100 for GLV-201260
Bottom platesTLB-3711-100 for GLV-204040
TLB-3713-100 for GLV-208040
TLB-3714-100 for GLV-201240
TLB-3715-100 for GLV-204050/60
TLB-3716-100 for GLV-2060XX
TLB-3717-100 for GLV-208050/60
TLB-3718-100 for GLV-201250
TLB-3733-100 for GLV-201260
Cable bottom platesTLB-3721-100 for GLV-204040
TLB-3722-100 for GLV-206040
TLB-3725-100 for GLV-204050
TLB-3726-100 for GLV-206050
TLB-3723-100 for GLV-208040
TLB-3727-100 for GLV-208050
TLB-3724-100 for GLV-201240
TLB-3728-100 for GLV-201250
13
Type No. H x W x D mmOBR-404038 228x203x35
OBR-404038-UL 228x303x35
OBR-406038 228x370x35
OBR-406038-UL 228x460x35
OBR-505038
OBR-505038-UL
OBR-6060-38
OBR-606038-UL
TILB-9999-OBR Mounting of OBR in cabinet doors
Plexi glass lid PLX is mounted on control plates, touch screens and displays in order to protect the components against the water pressure when cleaning. The lid should be lifted for handling, and falls back to the original position when re-leased. PLX is manufactured of a combination of stainless steel / plexi glass and with the standard widths of 203, 303, 370 and 460 mm. PLX is customised for our panels BTP and BTF, but can be mounted on all types of en-closures by means of welded bolts or through bolts.
Type No. H x W x D mmPLX-232003 228x203x35
PLX-233003 228x303x35
PLX-233703 228x370x35
PLX-234603 228x460x35
Stainless steel control panel type BTP with mounting system comprising i.a. swivel arm, pivot joint, flanges and wall bracket, which makes it possible to fasten the control panel where necessary. Suspension system is available as accessory, and is made of standard sub-components on the customer’s request.Available in widths 340, 410 and 500 mm with the feasibility of mounting an extra plexi glass cover over the screen and key board with our PLX shieldings.Delivered as standard in polished EN 1.4301 / AISI 304.
Type No.BTP-303413-100
BTP-304113-100
BTP-365013-100
Stainless observation door, type OBR can be mounted on an existing cabinet to obtain IP69K density around the components, which are fixed in the cabinet. As a standard the OBR door is available in sizes from 400x400 mm to 800x800. A polycarbonate window is fayed in the door. Is available in either EN 1.4301 / AISI 304 or EN 1.4404 / AISI 316L.Approvals: IPX6, some models UL Type 4x.
14
Control panel for swivel arms - BTP
Plexi glass protection against moisture - PLX
Observation frames - OBR / doors
Stainless control panel type BTF and control boxes are related to BTP, but are de-signed for mounting on a rack or direct on the machine frame. The control panel BTF is manufactured of EN 1.4301 / AISI 304.The rack is equipped with a support. Is also available with support and transport wheel or rack for mounting on a plane surface.
Type No.
BTF-302115
BTF-303115
Airlocks of stainless steel applied for protecting the vent holes in enclosures with a heating effect that needs to be removed. The airlocks come in two varieties, one with a labyrinth packing reaching a density of IPX6, and one which is completely open at the bottom. (This variety has no approval).
The airlocks are available in EN 1.4301 / AISI 304. The airlocks may be combined with ventilators and filters, which are kept in stock. Approvals: IP X6 (variety with labyrinth packing).
Type No.
Airlock with labyrinth sealing and packingTLB-7980-100 ø78 small
TLB-7990-600 ø114 medium
TLB-7995-100 ø140 large
Airlock without labyrinth sealing, with packingTLB-7950-100 ø 78 small
TLB-7960-100 ø114 medium
TLB-7970-100 ø140 large
The SPU and SPC enclosures are available as standards in the below sizes. Both enclosures are manufactured in EN 1.4301 / AISI 304. SPU desk is delivered in 1.5 mm and doors in 2.0 mm. Accessories such as airlocks, ventilators, plexi glass shieldings and bases are available.Approvals: IPX6
Type No. H x W x D mm
SPC desk, control desk for 19” screenSPC-555045 550x500x45
SPU desk, upright desk with lidSPU-906050 900x600x500
SPU-909050 900x900x500
SPU-901250 900x120x500
Base, height = 50 mmTLB-3390-100 for SPU-906050
TLB-3391-100 for SPU- 909050
TLB-3392-100 for SPU-901250
15
Airlock with IP X6
Control panel for columns or fixture - BTF
Control desk for 19” screen - SPC and upright desk - SPU
CUBIC-Modulsystem A/SSkjoldborgsgade 21 9700 Broenderslev
Denmark Tel +45 9882 2400
E-mail: [email protected]
Stanfo A/SFabriksvej 17C 3000 Helsingør
Denmark Tel +45 4922 4445
E-mail: [email protected]
- A CUBIC subsidiary
2316
XXX
X EN
G 6
46