Upload
leliem
View
213
Download
0
Embed Size (px)
Citation preview
ww
w.a
rbur
g.us
Schedule Overview
ARBURG GmbH + Co KGDIN EN ISO 9001 + 14001 + 50001 certified
© 2016 ARBURG GmbH + Co KGThe brochure is protected by copyright. Any utilisation, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG.
All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustra-tions and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
ARBURG GmbH + Co KG
Arthur-Hehl-Strasse · 72290 Lossburg · Tel.: +49 7446 33-0 ·
www.arburg.com · E-Mail: [email protected]
With locations in Europe: Germany, Belgium, Denmark, France,
United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland,
Slovakia, Spain, Czech Republic, Turkey, Hungary | Asia: People’s
Republic of China, Indonesia, Malaysia, Singapore, Taiwan,
Thailand, United Arab Emirates | America: Brazil, Mexico, USA
For more information, please go to www.arburg.com.
Customer Training
2017
USA
6800
44_E
N_U
S_09
2016
· Su
bjec
t to
lter
atio
ns
Pr
inte
d in
Ger
man
y
3
Dear valued Customer,
The trademark of the ARBURG injection molding ma-
chines is their versatility and flexibility. It is important
therefore that you, our customer, should be able to
obtain a full understanding and appreciation of its full capability.
For this particular reason ARBURG has put together this booklet to
offer you and your technicians the possibility of participating in training
courses which will enable you to acquire all the skills required to work
with the ARBURG range of injection molding machines.
Contained within this booklet is our training schedule for 2017 which
includes the current ARBURG training program subdivided into different
courses according to your specific requirements. Training classes are
offered at the ARBURG US-Headquarters in Rocky Hill, CT as well as in
the two ARBURG Technology Centers in Irvine, CA and Elgin, IL and in
the Southern Union State Community College in Opelika, AL.
Once you have selected the course that is most suitable for you please
contact our training coordinator Connie DiDomenico at (860) 667-6500.
She will assist you with the respective arrangements.
Yours faithfully
ARBURG, Inc.
Juergen Giesow
Introduction
4
Course times
8:30 AM - 4:30 PM
Costs
2 days $600.00
PT (Plastics Technology Course)
P (Machine Intensive Course)
3 days $600.00
R (MULTILIFT Robot System Course)
3 days $600.00
M-S (Machine Setting Course)
4 days $1000.00
SC (Service Course)
LSR (Processing Course)
Included:
Extensive course documents
and lunches.
Room reservations
If you require any assistance
making h otel arrangements,
we would be glad to help.
Course enquiries are also
possible via our website.
Registration / confirmation
Registration should take place
no later than 2 weeks before the
course commencement date.
We reserve the right to cancel the
courses in case the min. number
of participants is not reached.
For further information please call
Connie DiDomenico at
(860) 667-6500.
If your machine is not listed,
there are training courses avai-
lable that can be held at your
facility. Please contact ARBURG,
Inc. for additional information.
General information
Connie DiDomenico
5
Our Trainers
John Adamowicz
Jimmy Villegas
Tom Emmons
Tobias Pyka
Simon Blum
Stefan ScheibnerMarcus Hardt
Derek Schwandt
6
Training facilities
ARBURG, Inc., Rocky Hill, CT
ARBURG Technology Center – California, Irvine, CA
ARBURG Technology Center – Midwest, Elgin, IL
7
Training facilities / Addresses
US-HeadquartersARBURG, Inc.644 West StreetRocky Hill, CT 06067Tel.: (860) 667-6500Fax: (860) 667-6522www.arburg.use-mail: [email protected]
ATC – CaliforniaARBURG, Inc.51 DopplerIrvine, CA 92618Tel.: (949) 453-1313Fax: (949) 753-5066
ATC – MidwestARBURG, Inc.2585 Millennium DriveElgin, IL 60124Tel.: (847) 488-1313Fax: (847) 488-9011
Southern Union State Community College1701 Lafayette PkwyOpelika, AL 36801
8
Overview
M
SC-H
SC-E
P
R
PT
LSR
Machine Setting Course
Basic course for machine operation and
programming theory and practice
Service Course
Hydraulic machines maintenance
Service Course
Electric machines maintenance
Intensive hands on Machine Setting Course
MULTILIFT SELECT Robot System Course
ARBURG Robot System MULTILIFT H
ARBURG Robot System MULTILIFT V
ARBURG Robot System MULTILIFT SELECT
Plastics Technology Course
Course on injection molding materials, processing,
part and mold design, troubleshooting and process
optimization
LSR Processing Course
Machine
Service
Technology
Automation
9
• Discussion of typical machine features
• Introduction and exercises involving on-screen controls
• Mold installation and setting of clamping unit
• Setting of injection unit, regarding different plastic materials
and injection molded parts
• Optimization of machine setting
• Data collection and quality control
• Preventive maintenance
Course objective: Operation and processing with
ARBURG injection molding machines
Target group: Machine operators, set-up personnel and process
engineers
Precondition: Basic knowledge of injection molding
Course duration: 3 days
Cost of course: $600.00
Documents: Course manual with accompanying texts
Course description
Topics Machine
M-S SELOGICA direct Setting Course ALLROUNDER A/E
ALLROUNDER H
ALLROUNDER S
ALLROUNDER T
ALLROUNDER V
ALLROUNDER GOLDEN EDITION
Course content
Machine setting courseM
10
Topics Machine
SC-H SELOGICA Service Course ALLROUNDER S
ALLROUNDER T
ALLROUNDER U
ALLROUNDER V
ALLROUNDER GOLDEN EDITION
Course content
• Introduction (overview and machine preparation)
• Machine’s functional sequence with process diagram
• Important electrical, mechanical and hydraulic components
• Electrical and hydraulic circuit diagrams and machine components
• Possible malfunctions and correction
• Calibration
• Taking measurements from the machine (electrical and hydraulic)
SC-H Service course hydraulic machines
Course objective: Working with hydraulic and electric circuit diagrams,
Knowledge of the hydraulic and electric machine sequence.
Preventive maintenance. Effective trouble shooting. Machine calibration.
Target group: Service personnel, maintenance engineers, electricians,
electronic engineers.
Precondition: Basic knowledge of hydraulics, mechanics and electrics.
Course duration: 4 days
Course fee: $1000.00
Documents: Course manual with accompanying schematics.
Course description
11
• Introduction (overview and machine preparation)
• Machine’s functional sequence with process diagram
• Important electrical, mechanical and hydraulic components
• Electrical and hydraulic circuit diagrams and machine components
• Possible malfunctions and correction
• Calibration
• Taking measurements from the machine (electrical and hydraulic)
Topics Machine
SC-E SELOGICA Service Course ALLROUNDER A/E
ALLROUNDER H
Course content
SC-E Service course electric machines
Course objective: Working with hydraulic and electric circuit diagrams,
Knowledge of the hydraulic and electric machine sequence.
Preventive maintenance. Effective trouble shooting. Machine calibration.
Target group: Service personnel, maintenance engineers, electricians,
electronic engineers.
Precondition: Basic knowledge of hydraulics, mechanics and electrics.
Course duration: 4 days
Course fee: $1000.00
Documents: Course manual with accompanying schematics.
Course description
12
Topics Control Machine
P SELOGICA direct ALLROUNDER S
Intensive Course ALLROUNDER T
ALLROUNDER U
ALLROUNDER V
ALLROUNDER GOLDEN EDITION
Course content
• Finding Students will work to find the best process parameters
for the product
• Instructor will only guide and supervise
• Focus on the use of the graphic and monitoring functions as
well as SPC functions
• Use of different Plastic Materials
PIntensive Hands on Machine Setting Course
Course objective: Gaining in depth knowledge on setting up a
SELOGICA controlled molding Machine
Target group: Senior Process Technicians, Process Engineers,
Molding manager and Plant Manager
Precondition: Participation of an ARBURG M class or several years
of experience in setting up SELOGICA controlled molding machines.
Course duration: 2 days
Course fee: $600.00
Documents: Course manual with accompanying text
Course description
13
• Introduction, operation and programming of the MULTILIFT
Robot System
• Various applications of programming with gripper or vacuum
take out sequence
• Good shot, bad shot, sample shot separation using the MULTILIFT
• Use of subroutines
• Preventative maintenance
Course objective: Independent working with the
MULTILIFT Robot System
Target Group: Set-up personnel, machine operators, production
managers, mold manufacturers and mold designers
Preqiusites: Participation in a SELOGICA machine setting course
(M class)
Course duration: 3 days
Course fee: $600.00
Documents: Course manual with accompanying texts
Course description
Topics Robot System
R MULTILIFT H with SELOGICA control
MULTILIFT V with SELOGICA control
MULTILIFT SELECT with SELOGICA control
Course content
R MULTILIFT Robot System Course
14
• Injection molding materials
• Structure and typical properties of injection molding materials
• Overview of common materials
• Amorphous and semi-crystalline injection molded materials
• Injection molding process
• Sequence of injection molding machine
• Influencing variables in injection molding
• Process parameters and their influence on injection molded parts
• Process optimization
Course objective: Introduction to injection molding materials and
processing
Target group: Machine operators, process engineers, production
managers, controllers, sales, designers, planners
Precondition: Basic knowledge of injection molding and
injection molding materials
Course duration: 2 days
Course fee: $600.00
Documents: Course manual with accompanying texts
Course description
Topics
PT Injection molding materials
Injection molding process
PT Plastics Technology Course
Course content
15
• Introduction to the structure/properties of plastics and LSR
materials
• LSR-specific equipment of ALLROUNDERs
• LSR-specific programming, setting and monitoring of an injection
molding machine
• Basics of LSR injection mould configuration
• Process optimisation
• Review of Material Chemistry (done by material manufacturer)
• Review of Silicone Pumping System (done by a pump supplier)
• Review of different Silicone Molds (done by a Silicone Mold Maker)
Course objective: Developing knowledge of material properties and
the injection molding of liquid silicones (LSR)
Target group: Insatallation technicians, machine operators,
mold designers, process engineers
Requirements: Basic knowledge of injection molding and participation
in a machine adjustment course (M)
Course duration: 4 days
Course fee: $1000.00
Documents: Course folder and CD
"course will be instructed by a Toolmaker, Pump, Material and
Machine specialist"
Course description
Topics
PT Injection molding materials
Injection molding process
SV LSRCourse on special processesLSR processing
Course content
16
How to find us
Rocky Hill, CT
Irvine, CA
N
S
EW
500 m
2000 ft
41.651085,-72.664086
91
411
91
West Street
Exit 23At the ramp turn right
Exit 23At the ramp turn left
Hartford
New Haven
ARBURG, Inc.644 West Street | Rocky Hill, CT 06067
405
5
N
S
EW
200 m
500 ft
33.636343, -117.737814
Irvine Center Dr
Bake Pkwy
Research Dr R
esearch Dr
Bake Pkwy
Joh
n W
ayn
e A
irp
ort
/
Ora
ng
e C
ou
nty
Air
po
rt Los Angeles
Muller
Doppler
Santa Ana
San
ta A
na
San
Die
go
ARBURG, Inc. | ATC California51 Doppler | Irvine, CA 92618
17
How to find us
Elgin, IL
N
S
EW
500 m
2000 ft
42.063532,-88.349225 C
hic
ago9034
90
Big Timber Rd
Highland Ave Co Hwy 47 Royal Blvd
Co Hwy21N
McL
ean
Blv
d
Boncosky Rd
N R
anda
ll Rd
Slee
py H
ollo
w R
d
ARBURG, Inc. | ATC Midwest 2585 Millennium Drive | Elgin, IL 60124
Registration form
We have taken into account that liability claims against ARBURG are
excluded in the event that a course participant should suffer injury on
ARBURG's training premises.
To: ARBURG, Inc. – Attn. Connie DiDomenico
Fax: (860) 667-6522 - [email protected]
From:
Date, Signature P.O. Number
Fax
Company:
Mr. /Mrs.
Address:
E-Mail:
Phone: Fax:
Registration for a Training Class at:
ARBURG, Inc. - Rocky Hill, CT
ARBURG, Inc. - Irvine, CA
ARBURG, Inc. - Elgin, IL
Southern Union State Community College, Opelika, AL
Type (M, SC, P, PT, R, LSR) Date of Course Participant
Rocky Hill, CT overviewCourse
M-SJanuary 11 - 13February 01 - 03April 05 - 07May 24 - 26June 12 - 14September 13 - 15October 11 - 13November 15 - 17December 18 - 20
SC-HFebruary 14 - 17April 25 - 28October 31 - November 03 December 12 - 15
SC-EMarch 28 - 31June 06 - 09October 03 - 06
PFebruary 27 - 28May 01 - 02November 06 - 07
PTJanuary 30 - 31Apri 03 - 04May 22 - 23September 11 - 12November 13 - 14
LSRDecember 05 - 08
RJanuary 24 - 26March 01 - 03May 03 - 05September 18 - 20November 08 - 10
M-SJanuary 18 - 20March 14 - 16April 19 - 21 May 16 - 18 (in Spanish)June 07 - 09September 18 - 20October 18 - 20December 11 - 13
SC-HMarch 21 - 24November 14 - 17
SC-EMay 23 - 26December 05 - 08
PFebruary 13 - 14May 08 - 09September 21 - 22December 14 - 15
PTJanuary 16 - 17June 05 - 06October 16 - 17
LSRApril 04 - 07
RFebruary 15 - 17May 10 - 12October 23 - 25December 18 - 20
M-SJanuary 11 - 13 February 22 - 24 March 14 - 16 (in Spanish)April 10 - 12 May 24 - 26September 11 - 13October 03 - 05 (in Spanish)October 18 - 20December 06 - 08
SC-HMay 02 - 05September 26 - 29
SC-EMarch 07 - 10November 14 - 17
PMarch 27 - 28June 12 - 13September 14 - 15November 06 - 07
PTFebruary 20 - 21 May 22 - 23October 16 - 17December 04 - 05
LSROctober 10 - 13
RJanuary 30 - February 01 March 29 - 31June 14 - 16September 18 - 20November 08 - 10December 11 - 13
M-SMarch 14 - 16May 16 - 18 September 26 - 28December 05 - 07
Elgin, IL overview
Opelika, AL
Course
Course
Irvine, CA overviewCourse
M-SJanuary 18 - 20March 14 - 16April 19 - 21 May 16 - 18 (in Spanish)June 07 - 09September 18 - 20October 18 - 20December 11 - 13
SC-HMarch 21 - 24November 14 - 17
SC-EMay 23 - 26December 05 - 08
PFebruary 13 - 14May 08 - 09September 21 - 22December 14 - 15
PTJanuary 16 - 17June 05 - 06October 16 - 17
LSRApril 04 - 07
RFebruary 15 - 17May 10 - 12October 23 - 25December 18 - 20
M-SJanuary 11 - 13 February 22 - 24 March 14 - 16 (in Spanish)April 10 - 12 May 24 - 26September 11 - 13October 03 - 05 (in Spanish)October 18 - 20December 06 - 08
SC-HMay 02 - 05September 26 - 29
SC-EMarch 07 - 10November 14 - 17
PMarch 27 - 28June 12 - 13September 14 - 15November 06 - 07
PTFebruary 20 - 21 May 22 - 23October 16 - 17December 04 - 05
LSROctober 10 - 13
RJanuary 30 - February 01 March 29 - 31June 14 - 16September 18 - 20November 08 - 10December 11 - 13
M-SMarch 14 - 16May 16 - 18 September 26 - 28December 05 - 07
Elgin, IL overview
Opelika, AL
Course
Course
Irvine, CA overviewCourse
ww
w.a
rbur
g.us
Schedule Overview
ARBURG GmbH + Co KGDIN EN ISO 9001 + 14001 + 50001 certified
© 2016 ARBURG GmbH + Co KGThe brochure is protected by copyright. Any utilisation, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG.
All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustra-tions and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
ARBURG GmbH + Co KG
Arthur-Hehl-Strasse · 72290 Lossburg · Tel.: +49 7446 33-0 ·
www.arburg.com · E-Mail: [email protected]
With locations in Europe: Germany, Belgium, Denmark, France,
United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland,
Slovakia, Spain, Czech Republic, Turkey, Hungary | Asia: People’s
Republic of China, Indonesia, Malaysia, Singapore, Taiwan,
Thailand, United Arab Emirates | America: Brazil, Mexico, USA
For more information, please go to www.arburg.com.
Customer Training
2017
USA
6800
44_E
N_U
S_09
2016
· Su
bjec
t to
lter
atio
ns
Pr
inte
d in
Ger
man
y