Custody Transfer References Promass

Custody transfer references and applications

of hydrocarbon measurement by Promass Coriolis mass flow

meters

After the flow meters are being manufactured and calibrated with water,

the units are to SPSE in France for hydrocarboncalibrations according to OIML/API in order to ensure maximum

performance on site.

15,000 liter prover at SPSE in France with the

four tanks in the back for the four different fluids

Promass F 6” and 10” hydrocarbons tests


Principle of operation

SPSE

Fos sur Mer France

Naphtha

690 kg/M3

Viscosity 0.7 cSt at ambient

Oural crude

853 kg/M3

Viscosity 7 cSt at ambient

Condensate

905 kg/M3


Fuel oil

960 kg/M3


The four hydro-

carbons used for the

calibration range of different

densities and viscosities

SPSEFos sur

Mer France


Promass 10” bidirectional and tandem testsat SPSE – Fos sur Mer France dec 2005

In the middle, the Coriolis flowmeter to be calibrated and verified

bidirectional

Tandem unitSPSE

Fos sur Mer France

Conclusions ( January - 2006)

NMI approvals now include

bidirectional use of the Promass

Coriolis meter for custody transfer !!!

• bidirectional approval

SPSEFos sur Mer

France

Tandem (Dual) Promass 10 ”coriolis meter

2 Promass 10” meters running in parallel – up to 3000 tons/hr.

Running on Oural crude oil

with6-7 cSt

and 853 kg/M3

SPSEFos sur Mer

France

Tandem (Dual) Promass 10” calibration

Running on Oural crude oil

with6-7 cSt

and 853 kg/M3

Tandem calibration

of unit A and B

SPSEFos sur Mer

France

Calibration of both units, 48 FT10A and 48 FT10B,running in parallel

Flow rate of tandem meters at 4.3 Bars (g):

3050 m3/hrs = 460,000 BPD

Maximum permissible error

acc to OIML R117

Preemraff – Lysekil - Sweden

Berth 3

Turbine meter line has been

removed

Basket strainer will be removed

shortly

2 each Promass F 10”coriolis

meters ready to be installed


Berth 2 Gasoil metering system Tag 48 FT 10 A / B

Consisting of

2 each Inlet / outlet spoolpieces 10/12” 300 lb

2 each Promass 83 F

• 10” ANSI 300 lb

• frequency 10 pulses/ kg

• modbus RTU

• Min flowrate for vessels non splashing volume 100

MT/H

• Max flowrate 3000 MT/H

(3750 M3/H @ 800kg/M3)


Jetty 5

Tandem 6” coriolis

meters with remote

electronics for fuel oil

pipeline and meter run

tracing and insolation


Jetty 5

loading/ unloading

refined products

• gasoil

• fueloil

Flowcontrol via anti

cavitation butterfly

valve

Also used: avoiding

cavitation controlling

max rate via flow meter

exciter current

Bunker C flow meter

Preemraff System overview


Vessel Bro Gemini

Medium: gasoil MK1

Load results on the

Promasses 48 FT 11 A and B

Batch gross volume (GOV) =8033.76 M3

Batch std. Volume (GSV) = 7927.7 M3

Batch mass (MTvac) = 6422.2

Deviation compared to ships figures

incl. VEF

(7921.793 –7927.7) / 7927.7*100%=

0.075 %

Deviation compared to ships figures

excl. VEF

Value of VEF unknown

Results of

Surveyor Certificate of

Quantity

& Comparison

to the

2 coriolis meters

48 FT 11 A

48 FT 11 B


Study:

crude oil harbour

intention

to install

2 metering skids

consisting of

12 ea 10”coriolis

meters

In order to cope with a

total flowrate

of 18000 M3/H

Or

5000 liters/sec

FPSO SSP Piranema 2 x 10”

PromassF

VIP Seminar "Oil & Gas" - 19 March 2004

FPSO Ciadade de Vitoria

Onsite training for crew

on 6” Coriolis mass flow meter


FPSO Ciadade de Vitoria


Replacement for Ultra sonic within 1 week

FPSO ExxonMobilAngola, 250 km Offshore (West)

Luanda1,500 m water depth250,000 BOPD (largest in world)28 – 30°API

E+H at its full capacity Requested on Friday in Houston Produced and delivered within 3

days Thursday: On-hand training

(while waiting for spool peace) Friday: Installed and

commissioned


Offshore Crude Oil Test Separator

Instrument: Promass 83F

Industry: Oil & Gas

Fluid: Crude Oil

Reason:

Previous meter frequently clogged

Flow measurement after test separator

Replacement of U-tube flowmeter

Self-draining

Benefits:

No maintenance

Reliable measurement

(No clogging!)

Shell Brunei, Offshore Platform AMPP-12With courtesy of Shell

Footprintnot only offshore expensive

Conventional and simple design to do the same


Oil metering in retrofit

Conventional metering skid designs require large space and are a

heavy load for the installation

The same metering quality can be obtained by use of a compact Coriolis Promass

F on much smaller footprint

Custody transfer applicationsfrom China

Challenge: Reduce discrepancies

between ship and tank measurement

Environment: Tropical environment at

cost line of Shanghai

Solution: 2 x 10“Promass in ship

offloading lines

Benefit:- Accurate metering- Detection of air or gas in

oil- none-stop operation no

proving required- Oil quality control via

density measurement

Product group: Promass 83F 10@

Industry: O&G

Installed at: June 2006

China, Shanghai Terminal

Company profile

Company profile

Second metering unit with 10“

Promass at front of ship

Ship Loading

Ship Loading

Proline Promass 83F1H

Application: • Loading Ship 4 sets • Diesel, Gasoline• DC 2.0

Titan Proposal

Proline Promass 84F80

Application: • Loading Truck 14 Sets• Chemical Products• DC > 2.0

Yulin Refinery


Application: • Loading Truck 8 Sets• Diesel, Gasolene• DC 2.0

Changyi Refinery


Application: • Loading Truck 8 Sets • Diesel, Gasolene• DC 2.0

Proline Promass 83F

Endress+Hauser

83F1F-AD2SAACEBBA5

2 pics

With Pressure Compensation

Measuring range：

0.5 bar~ 16 bar

Yanshan Refinery

83F2F-AAASAACABGAN ×2

Ship loading in China

Customer:Dalian Beiliang company P.R.China

Applicationcustody transfer of gasoline, diesel oil, kerosene

• One 83F2F for testing on Yangzi Metrology calibration rig

• Two 83F2F for ship loading--- Dalian Beiliang Jetty custody transfer of gasoline, diesel oil, kerosen, tested at NIM China

• One 83F2F for Luoyang refinery plant for mass balance of crude inflow

The first 10” Promass in China 2005

Yangzi Metrology station is authorized by CNAL, special flow calibration centre for SINOPEC.

Calibration Rigs :Vol. / Grav

Flow range ： 0.5~900m3/h

System uncertainty ： +/- 0.05%

Testing on Yangzi Metrology station

Promass 83F2F-AD1SAACABGAN being installed

After testing,Promass 83F2F-AD1SAACABGAN being for road show

Testing on Yangzi Metrology station

Chinese interface is deeply greeted

Chinese human interface

0.1

accuracy ： +/-0.072%

Exceeding accuracy requirements

NIM China-- National Institute Metrology is the highest metrology institute in China

Testing at NIM China

Calibration Rigs:Vol. / Gravimetric

Flow range ：0.5~960m3/h

System uncertainty：

+/- 0.05%

Testing at NIM China

• Chinese interface is deeply greeted • Small size is easy for installation

Easy installation at NIM

Verification conclusion: 0.1

Certificate of verification

83F2F-AAASAACABGAN

Series No: 75010502000

Application: Custody transfer ship loading in Dalian Jetty

NIM official test report

Application:Refinery tower four outlets flow monitoring•One 83F1H---gasoline •Two 83F1F---Diesel oil •One 83F2F---Crude oil

Customer:SINOPEC LuoyangRefinery plant

Luoyang refinery plant

SASOL, South Africa

Customer:Sasol ordered in China

Applicationcustody transfer ship on and offoadinggasoline, diesel oil, kerosene

Jan 2005First 10“

Promass

order for

China5 nos

CT metering station on barge in ChinaTande

m set of 6“

Promass on

floating jetty.

2 x 150kg.Standa

rd mass flow

meter were 2

x 750kg,

too heavy

LPG terminal in Korea

Liquid propane terminal Korea

Process Specs:Fluid: Propane liquid

Pressure: 3 ~ 5 bar

Temperature: -42°C

Flow Range: 900 ~ 1,200 ton/ hrs

Process:Propane liquid unloading process from ship to tank yard.

Solution:Earlier SK gas measured liquid Propane with turbine flowmeter.

SK gas required reliable and precise flow measurement to confirm ship unloading.

Instrument:Model: 83F2F-CABSAACAAAAASize/Lining: 250 ASoftware/Bus: HART

Company profile

Company: SK Gas Terminal

Location: Pyeong taek in KOREA

Key Success Factors:

Compact volume of mass flowmeter against Rheonics and simple installation environment against Oval’s turbine flowmeter and Rheonics’s mass flowmeter and

Date: 12-05-2005

Reference: DRF

Installation directly at point of transfer

Position of Promass

Small foot print requirement on jetty

No meter run, no flow conditioner, no filter, no prover

Terminal and loading arms

Position of Promass

Detailed application information

No vibration or pipe stress compensat

or installed.

With fluid temperature of -42°C

and ambinet

temperature of up to over 30°C pipe will be under stress.

Weights and Measure approvedcalibration trailer

Johan van Jaarsveldt, South Africa


Mobile flow metering and validation

Nitrogen purge port

Approved by SABS dep. of

Metrology, South Africa

Fully equipped unit with

transmission cable, drip pans and

purge installation.


10“ Mobile flow metering and validation




6“ Mobile flow metering and validation




3” and 4” Mobile flow metering and validation




Meter size Skid weight Skid flow range

3” and 4” 750 kg 0 - 1,500/2,500 kg/min = 22,500 BPD

6” 850 kg 0 - 5,000 kg/min = 45,000 BPD

10” 1,140 kg 0 - 10,000 kg/min = 90,000 BPD

Mobile flow metering and validation

Approved by SABS dep. of Metrology, South Africa

Overall repeatability exceeding 0.02%

Detailed drawings are available

Total NetherlandsNills Mureau, SCNL

DOW Terneuzen, BENELUX

Fingerprint has been

stored and Dow

intends to do periodic evaluations

in corporation with us to

gather some more diagnostic experience

s.Details and

pictures you'll find attached.

TOTAL Refinery

Naphta transport from refinery to customer in 6” pipeline

Promass 84F 4”600lbs RF ANSI connected to OMNI model 6000

Flow = 200-300 m3/hr ; P = 41-50 barg ; T = 38-75ºC

Viscosity = 1 cSt @ 38ºC ; Density = 650-700 kg/m3

TOTAL Refinery

LPG (Propane/Butane) jetty shiploading from 10” pipeline

Promass 84F 4”300lbs RF ANSI connected to OMNI model 6000

Flow = 350 m3/hr ; P = 8-14 barg ; T = -40 ..+38ºC

Viscosity = <0,7 cSt ; Density = 550 kg/m3

DOW Benelux, refineryNaphtaInstalled 2002Paul Borggreve, SCNL

Pigable loading arm metering

United Kingdom

Contrec 1010 OIML approved tanker loading terminal

Promass 64 - Mobil Oil

Promass 64M


Flexible Loading Arm with Automatic Pig System


Two Stage Flow Control Valves


Loading a Tanker - Wax Emulsion


Shell lub oil loading station

United Kingdom

Modern UK loading bay using Promass

Tanker loading using Profibus DP network

Previous metering technology

UK W&M approved Promass 64

Shell crude oil CT metering station

Brunei, Malaysia

Very compact design for most accurate measurement

Production skid

in Venezuel

a: Accurate measure-

ment even under

pulsating flow

condition.

Calibrated against

prover accordin

g to Venezuela W&M

Documents

Custody Transfer References Promass