Upload
llovar
View
46
Download
10
Embed Size (px)
Citation preview
GENSET ENGINE
RATINGS 1)1500 rpm 1800 rpm
PRIME STAND-BY PRIME STAND-BY
Rated output 2) kWm 263 290 286 315
PERFORMANCES
STAND-BY POWERThis is the maximum power available for a period of 500 hours/year with a mean load factor of 90% of the declared stand-by power.No kind of overload is permissible for this use.
CONTINUOUS POWERContact the Iveco Motors sales organization.
PRIME POWERThe Prime Power is the maximum power available with varying loads for an unlimited number of hours. The average power output during a 24 h period of operation must not exceed 80% of the declared prime power between the prescribed maintenance intervals and at standard environmental conditions.A 10% overload is permissible for 1 hour every 12 hours of operation.
1) Ratings in accordance with ISO 8528 - For duty at temperature over 40°C and/or altitude over 1000 meters must be considered a power derating factor. Contact the Iveco Motors sales organization.
2) Net power at flywheel available after 50 hours running with a ± 3 % tolerance.
CURSOR13 TE1
CURSORThe 6 cylinder in line turbocharged and af-
tercooled Diesel engines of the CURSOR
family are the result of advanced techno-
logical solutions that give maximum power
performances with reduced displacement
and are offered by Iveco Motors in genset
duty market engines.
Fully electronic control of the injection sys-
tem allows a power range from 236 to
500 kW with the low gaseous emission
level required by European 2002/88/EC
directive.
TECHNICAL DATA
Publ
icat
ion
P4A
04C
004E
- 0
3.06
Engine model CURSOR13 TE1
Diesel 4 stroke - Injection direct, E.U.I.
Nb. of cylinders and arrangement 6, in line
Speed governor electronic
Total displacement liters 12.9
Bore x Stroke mm 135 x 150
Aspiration turbocharged aftercooled
Cooling system liquid (water + 50% Paraflu 11)
Flywheel housing / Flywheel SAE1 / 14”
Flywheel rotation CCW
Lube oil specifications ACEA E3 - E5
Lube oil consumption < 0.1% of fuel consumption
Fuel specifications EN 590
Oil and filters interval for replacement hours 600
RPM 1500 1800
Fuel consumption at :
100% load l/h (g/kWh) 61.3 (188.8) 72.2 (202.0)
80% load l/h (g/kWh) 50.6 (194.8) 59.4 (207.9)
50% load l/h (g/kWh) 33.8 (208.2) 39.7 (222.3)
Coolant capacity:
engine only liters ~ 19.5
engine + radiator liters ~ 67
ATB (without canopy) °C 60
No remote cooling radiator allowed.
Lube oil total system capacity including
pipes, filters etc. : liters ~ 35
Electrical system 24 Vcc
Starting batteries :
recommended capacity Ah 2 x 185
discharge current (EN 50342) A 1200
Cold starting :
without air preheating °C -10
with air preheating °C -25
Engine dry weight kg 1180
OVERALL DIMENSIONS
Local distributor
Spec
ifica
tions
sub
ject
to
chan
ge w
ithou
t no
tice
Illust
ratio
ns m
ay in
clud
e op
tiona
l equ
ipm
ent.
SCOPE OF SUPPLY
OPTIONAL EQUIPMENT
Iveco Motors engine CURSOR13 TE1 equipped with :- Mounted radiator incorporating air-to-air charge cooler.- Front radiator guard.- Oil drain pump.- Mounted belt driven pusher fan.- Fan guard.- Mounted air filter with replaceable cartridges.- Fuel filter.- Primary fuel filter/water separator.- Replaceable oil filter.- Electronic engine control unit, pump injector units with wiring loom and sensors.
- Box relais.- WT and OP sensors for gauges.- HWT and LOP sensors.- Front engine mounting brackets.- Flywheel housing SAE 1 and flywheel 14”.- Re-directable exhaust gas elbow.- Recirculed oil breather system.- Oil dipstick.- 24 Vdc electrical system.- User’s handbook.
THE ENGINE IS SUPPLIED WITHOUT LIQUIDS.
On request the engine can be supplied with :- 230 Volt water jacket heater.- Turbo and exhaust gas guards.- Exhaust gas flexible joint.- Low water level sensors.
CURSOR13 TE1
L = 2272 mmW = 1055 mmH = 1468 mm
Iveco MotorsVia Puglia, 15 - 10156 TorinoTel. +39 (011) 0076245 - Fax +39 (011) 0076275
Iveco MotorsViale dell’Industria, 15/17 - 20010 Pregnana Milanese - MilanoTel. +39 (02) 935101 - Fax +39 (02) 93590029
www.ivecomotors.com
1500 rpm 1800 rpm
Engine modelBasic engineNumber cylinderFiring order (N°1 nearest to fan)Cylinder arrangementValves per cylinderCycleInjection system direct E.U.IInduction System turbo aftercooler air/airElectronic engine control unit BOSCH MS 6.2Bore mmStroke mmTotal displacement literMean piston speed m/s 7,5 9Compression ratioFlywheel rotationHousing flywheelFlywheelMoment of inertie
without flywheel Nm2
Flywheel only Nm2
BMEPPrime Power bar/kPa 16,7 / 1665,7 15,5 / 1552,8Stand-by Power bar/kPa 18,3 / 1832,3 17,1 / 1708,1
Dry weight (including cooling package) kgEnergy to coolant kcal/kWh 281 301Energy to charge cooler kcal/kWh 152 200Energy to radiation kcal/kWh 56 48Dimensions L x W x H mm
1500 rpm 1800 rpm
Continuous Power (gross) kWm 228,7 264,5Prime Power (gross) kWm 282,4 324,5Stand-By Power (gross) kWm 309,2 354,5Fan consumption kWm 14,2 24,5Continuous Power (net) kWm 214,5 240Prime Power (net) kWm 268,2 300Stand-By Power (net) kWm 295,0 330Performances conditions
temperature °Caltitude slm m
Derating%/5°C
altitude >1000 m %/500m
14,12
~ 1180
≤ 40≤ 1000
2272 x 1055 x 1468
anti clockwise viewed on flywheelSAE 1
14"
10,30
135150
12,88
16,5 : 1
in line4
diesel 4 stroke
CURSOR13 TE1F3BE0685A*B001 - 504090622 XZ
61-4-2-6-3-5
1/ GENERAL
2/ PERFORMANCES
temperature > T 40°C
Engi
ne C
URSO
R13
TE1
CURSOR13 TE1295 kW (1500 rpm) - 330 kW (1800 rpm)
1/3
1500 rpm 1800 rpm
TypeRecommanded coolantCoolant capacity
motor only liter 19,5radiator and hoses liter 47,5
Coolant pump flow l/min 460,525 552,63Pressure cap setting kPa (bar) 70 (0,7)
°C 103Pa 196
Air To Boil Prime Power °C 66,8 66,9Fan
diameter mm 700number of pale 8drive ratiospeed rpm 2115 2538air flow m3/s 5,59 6,71power consumption kWm 14,2 24,5
1500 rpm 1800 rpm
Oil sump capacitymax litermin liter
Oil system capacity including filter literOil pressure at rated speed kPaOil temperature
normale °Cmax °C
Engine angularitylongitudinale degreestrasverse degrees
Servicing intervall hoursOil specificationOil consumption %fuel
1500 rpm 1800 rpm
Air consumption at 100% of load m3/h (kg/h)Air intake restriction clean filter kPa (mbar)Air intake restriction dirty filter kPa (mbar)Air filter type
1500 rpm 1800 rpm
Gas flow at stand by kg/h 1656 2041Max temperature at PRP °C 447 430Max allowable back pressure kPa (mbar)Exhaust gas temperature kcal/kWh 625 661
1,4 : 1
dry
5 (50)
600
< 0,2
2 (20)5 (50)
1329 (1600) 1640 (1975)
ACEA E3 / E5
---120
30°30°
271435
250-500
liquidwater + 50 % paraflu 11
3/ COOLING PACKAGE
4/ LUBRIFICATION SYSTEM
5/ AIR INTAKE
6/ ECHAPPEMENT
Shutdown switch settingMaximal additional restriction
CURSOR13 TE1295 kW (1500 rpm) - 330 kW (1800 rpm)
Engi
ne C
URSO
R13
TE1
2/3
1500 rpm 1800 rpm
Fuel consumption atStand-By
80%50%
Fuel specifications EN 590Feed pump max suction head m ---
1500 rpm 1800 rpm
Voltage (negative to ground) V 24Starter motor
makepower kWpull current Amphold current Ampbreak away current Ampcranking current Amp
Number of teeth on starter motorNumber of teeth on flywheelStarting batteries
recommended capacity Ah 2xdischarge current Amp
(EN 50342)
Alternatorvoltage V 28charge Amp
1500 rpm 1800 rpm
Without air preheating °CWith air preheating °C
1500 rpm 1800 rpm
Nox Oxides of nitrogen gr/kWh 4,97HC Hydrocarbons gr/kWh 0,18Nox+HC gr/kWh 5,15CO Carbon monoxide gr/kWh 0,37PT Particles gr/kWh 0,082
Smoke Bosch
full load
10/ EMISSION GASEOUS AND PARTICLES
8/ ELECTRIC SYSTEM
DENSO5,5
190,5 (66,9) [56,2] 200,0 (78,6) [66,0]188,8 (61,3) [51,4] 202,2 (72,2) [60,6]
208,2 (33,8) [28,3] 222,3 (39,7) [33,3]
7/ FUEL SYSTEM
15510
185
-25
1200
-10D
ate
of u
pd
ate
06.
30.2
006
Spec
ifica
tions
sub
ject
to c
hang
e w
ithou
t not
ice
Illust
ratio
ns m
ay
incl
ude
optio
nal e
qui
pm
ent.
gr/kWh (l/h) [kg/h]
9/ COLD STARTING
194,8 (50,6) [42,5] 207,9 (59,4) [49,9]gr/kWh (l/h) [kg/h]gr/kWh (l/h) [kg/h]gr/kWh (l/h) [kg/h]
90
CURSOR13 TE1295 kW (1500 rpm) - 330 kW (1800 rpm)
Engi
ne C
URSO
R13
TE1
3/3