Embed Size (px)
Citation preview
CURRICULUM VITAE
PERSONAL DETAILS
1. Name : Aruan Efendy Mohd Ghazali 2. Date of Birth : 20-10-1979 3. Place of Birth : Machang, Kelantan 4. Office Address : Faculty of Civil Engineering, University Teknologi Mara,
40450 Shah Alam, Selangor, Malaysia 5. Tel.: : +6017 404 1979 6. Email : [email protected]/[email protected]
ACADEMIC QUALIFICATION
No Qualification Year Institution
1 PhD In Engineering 2016 University of Waikato
New Zealand
2 MSc. In Civil Engineering (Structures)
2007 Universiti Teknologi
MARA, Shah Alam Selangor
3 B.Eng. (Hons) Civil Engineering 2005 Universiti Teknologi
MARA, Shah Alam Selangor
4 Diploma In Civil Engineering 2003 Universiti Teknologi
MARA, Shah Alam Selangor
PROFESSIONAL MEMBERSHIPS
No Membership Year Institution
1. Member 2006 Board of Engineers Malaysia (BEM)
2. Member 2010
Concrete Society of Malaysia (CSM)
3 Member 2009
Department of Occupational Safety
and Health (DOSH)
COURSES THOUGHT
1. Structural Steel Design 2. Reinforced Concrete Design 3. Analysis of Determinate Structures 4. Static and Dynamic 5. Final Year Project 6. Structural Timber Design
MANAGEMENT POST
1. Director, Director of Endowment Unit – Nov 2019 to date 2. Coordinator PRIsMA - Jan 2017 - Sep 2019 3. Coordinator Research and Innovation Faculty - Mac 2017 – Dec 2017)
RESEARCH UNDERTAKEN 1. Title : Omproving Malaysia Knowledge Towards a Wood and
Furniture Industry 4.0 - Making 4.0 Grant Provider : Erasmus + EU Commision. Amount : RM 4,546,140.00 Duration : Nov 2018 – Nov 2021
2. Title : Behaviour of Space Trusses Incorporating Novel Soft Members Grant Provider : Geran Lestari, UiTM.
Amount : RM 20,000.00 Duration : Jul 2016 – Jun 2017
3. Title : Development of an Innovative Rolled-in Stiffening Scheme for Profiled Web Girders Grant Provider : Geran Kecemerlangan, UiTM. Amount : RM 10,000.00 Duration : Oct 2010 – Sep 2012
4. Title : Failure Mode of Analysis of RC Beams using Advanced Strengthened in Bending Composite Material Grant Provider : (FRGS), KPT. Amount : RM 40,000.00 Duration : Mac 2010 – Feb 2012
5. Title : Properties of Kenaf Wood Flour-Polypropylene Composites Grant Provider : Geran Kecemerlangan, UiTM. Amount : RM 8,000.00 Duration : December 2010 – December 2011.
6. Title : Using Dried Sewage as the Primary Material for the Production of Lightweight Aggregates. Grant Provider : Geran Kecemerlangan, UiTM. Amount : RM 9,800.00 Duration : March 2009 – March 2010.
7. Title : Structural Behaviour of Novel Profiled Web Steel and Composite Beam of Medium to Long Span for Structural and Building Applications Grant Provider : MOSTI (E-Science). Amount : RM 250,500.00 Duration : September 2007 – August 2009.
8. Title : Behaviour of Foamed Concrete Filled Steel Tubes (CFST). Grant Provider : (FRGS), KPT. Amount : RM 60,000.00 Duration : September 2007 – August 2009.
DISTINCTIONS
1. Recipient of The Most Highly Cited Paper Award 2018 - Journal Composite Part A. "A review of recent developments in natural fibre composites and their mechanical performance." Composites Part A: Applied Science and Manufacturing.
2. Outstanding Reviewer – Journal of Building Engineering - Elsevier (Q1)
JOURNAL PAPER 1. M. G. A. Efendy and K. Pickering (2018). "Comparison of strength and Young
modulus of aligned discontinuous fibre PLA composites obtained experimentally and from theoretical prediction models" Composites Part A: Applied Science and Manufacturing 208: 566-573.
2. Pickering, K. and M. G. A. Efendy (2016). "Preparation and mechanical properties of novel bio-composite made of dynamically sheet formed discontinuous harakeke and hemp fibre mat reinforced PLA composites for structural applications." Industrial Crops and Products 84: 139-150.
3. M. G. A. Efendy and K. Pickering (2016). "Fibre orientation of novel dynamically sheet formed discontinuous natural fibre PLA composites." Composites Part A: Applied Science and Manufacturing 90: 82-89.
4. Pickering, K., et al. (2015). "A review of recent developments in natural fibre composites and their mechanical performance." Composites Part A: Applied Science and Manufacturing.
5. M. G. A. Efendy and K. Pickering (2014). "Comparison of harakeke with hemp fibre as a potential reinforcement in composites." Composites Part A: Applied Science and Manufacturing 67: 259-267.
CONFERENCE PAPERS A. Presented at International Conferences 1. J. M. Irwan, A. H. Hanizah, I. Azmi, M. N. M. Soffi and Aruan M. G., “Static Behaviour of
Precast Cold-Formed Steel-Concrete Composite Beams With An Innovative Shear Transfer Enhancement,” in The 1st International Seminar on Sustainable Infrastructure and Built Environment in Developing Countries, Bandung, Indonesia, 2 – 3 November 2009.
2. J. M. Irwan, A. H. Hanizah, I. Azmi, P. Bambang, W. I. M. Haziman and. Aruan M. G, “The Load-end Slip Relationships of Precast Cold-formed Steel-Concrete Composite Beams,” in The Third Brunei International Conference on Engineering and Technology (BICET 2008), 21st Century: Challenges In Engineering & Technology, Brunei Darusalam, 3 – 4 November 2008.
3. Sooi Took Kowng, Aruan Efendy Ghazali and Tan Geem Eng, “Strength Test Of Concrete Plate Structures In Bending”, in International Seminar on Civil & Infrastruture Engineering 2008 (ISCIE ’08), Universiti Teknologi MARA, UiTM Malaysia, 11 – 12 June 2008.
4. J. M. Irwan, A. H. Hanizah, I. Azmi, P. Bambang, H. B. Koh and Aruan M. G., “The Effect Of Bent-Up Tabs Shear Transfer Enhancement Shapes, Angles And Sizes In Precast Cold-Formed Steel-Concrete Composite Beams”, in Fourth International Conference on High Performance Structures and Materials (HPSM 2008), Portugal, 13-15 May 2008.
5. J. M. Irwan, A. H. Hanizah, I. Azmi, P. Bambang, H. B. Koh and Aruan M. G., “Precast Cold-Formed Steel-Concrete Composite Beams: Shear Strength Of Bent-Up Triangular Tabs Shear Transfer Enhancement,” in International Conference on Civil Engineering 2008 (ICCE’08), Hyatt Regency Hotel, Kuantan, 12-14 May 2008.
6. Aruan M.G., Hanizah A.H., Azmi I., Mohd Amin N, M. Irwan J.,‘Flexural Behavior of RC Beams Strengthened With FRP Sheetings with Various Tapered End Distances’, in Technology and Innovation for Sustainable Development Conference (TISD2008), Faculty of Engineering, Khon Kaen University, Thailand, 28-29 January 2008.
7. J. M. Irwan, A. H. Hanizah, I. Azmi, P. Bambang, H. B. Koh and Aruan M. G., “Shear Transfer Enhancement In Precast Cold-Formed Steel-Concrete Composite Beams: Effect of Bent-Up Tabs Types and Angles,” in Technology and Innovation for Sustainable Development Conference (TISD2008), Faculty of Engineering, Khon Kaen University, Thailand, 28-29 January 2008.
8. Abdul Hamid. H., Mohd Ghazali, A. E., Mohd Saman.,H., “Tensile Strength Retention Of Fibre Reinforced Polymer (FRP) Rods Exposed To Elevated Temperatures And Alkaline Environment”, in International Seminar on Civil and Infrastructure Engineering 2006 (ISCIE ’06), Universiti Teknologi MARA, UiTM Malaysia, 13-14 June 2006.
B. Presented at National Conferences
1. Yasmin Sari Nursal, Hanizah Ab Hamid, Azmi Ibrahim, Aruan Efendy Mohd Ghazali,
“Finite Element Analysis on Bending Behaviour of Steel Plate Box Girder”, Persidangan Kebangsaan Kejuruteraan Awam ke 5 (Awam 09), 16 – 17 November 2009.
2. Ahmad Fahmy Kamarudin, Aruan Efendy Mohd Ghazali, Hanizah Abdul Hamid, Paldip Singh A/L Gurdip Singh, Ahmad Zurisman Mohd. Ali and Koh Heng Boon, “Bonding Strength of near Surface Mounted Glass Fibre Reinforced Polymer”, Persidangan Kebangsaan Kejuruteraan Awam ke 5 (Awam 09), 16 – 17 November 2009.
3. J. M. Irwan , A.H. Hanizah , I. Azmi , W.I.M. Haziman, H.B Koh, Aruan M.G., “Experimental Study on Behavior of Precast Cold-Formed Steel-Concrete Composite Beams: Effect of Bent-Up Tabs Shapes and Cold-Formed Steel Thickness, ” in Malaysian Technical Universities Conference On Engineering And Technology 2008 (MUCET 2008), Putra Palace, Kangar, Perli, 8 – 10 March 2008.
4. Abdul Hamid H. A., Ibrahim A., Mohd Amin N., Mohd Ghazali A.E., “Strengthening system of Reinforced Concrete Beams using Fiber reinforced Polymer (FRP)”, in Persidangan Kebangsaan Keempat Kejuruteraan (AWAM 2007), Pulau Langkawi, 29 - 31 May 2007.
5. A. Hamid. H., M. Amin. N., M. Ghazali A.E., “Effectiveness Of Near Surface Mounted (NSM) Glass FRP Technique for Strengthening Of Reinforced Concrete Beams”, in National Seminar on Civil Engineering Research (SEPKA 2006), Skudai Johor, 19 - 20 Dec 2006.
EXHIBITION International Exhibitions 1. Name : International Trade Fair IENA 2008 Title : Concrete Filled Built-up Column Award : Gold Medal Organizer : International Trade Fair IENA Venue : Exhibition Centre Nuremberg, Nuremberg, Germany Date : 30 October – 2 November 2008 National Exhibitions
1. Name : Invention Innovation & Design Exposition (IIDEX 2018)
Title : Aligned short natural fibre composites Award : Silver Medal Organizer : Institute of Research, Development and Commercialization, RMI, UiTM Malaysia Venue : DATC Date : 24 September – 26 September 2018 2. Name : Inventions, Innovation and Design 2008
Title : The Behavior of Square Thin Walled Concrete Filled Steel with Stiffeners
Award : Gold Medal Organizer : Institute of Research, Development and Commercialization, RMI, UiTM Malaysia Venue : Dewan Sri Budiman dan Annex, UiTM Shah Alam Date : 30 October – 2 November 2008 3. Name : Inventions, Innovation and Design 2008
Title : A new Shear Transfer Enhancement in Precast Cold Formed Steel-Concrete Composite Beam.
Award : Bronze Medal Organizer : Institute of Research, Development and Commercialization,
RMI, UiTM Malaysia Venue : Dewan Sri Budiman dan Annex, UiTM Shah Alam Date : 30 October – 2 November 2008 4. Name : Malaysia Technology Expo 2007 (MTE 2007)
Title : Strengthening Structures using Near Surface Mounted (NSM) Glass Fibre reinforced Plastic (GFRP) Composite Rods: A case of Flexural Strengthening of RC Beams
Award : Bronze Medal Organizer : Malaysian Association of Research Scientists (MARS)
Venue : Pusat Dagangan Dunia Putra (PWTC), Kuala Lumpur Date : 29 – 31 March 2007 5. Name : Inventions, Innovation and Design 2007
Title : Strengthening Structures using Near Surface Mounted (NSM) Glass Fiber reinforced Plastic (GFRP) Composite Rods: A case of Flexural Strengthening of RC Beams
Award : Gold Medal Organizer : Institute of Research, Development and Commercialization,
RMI, UiTM Malaysia Venue : Dewan Sri Budiman dan Annex, UiTM Shah Alam Date : 24 – 25 January 2007
PROJECT CONSULTATION 1. Project Title : Prestressed Concrete Turnout Bearer Approval Test for
Gemas JB Project Company : VOSSLOH COGIFER MALAYSIA SDN BHD Amount : RM 100,300.00 Completion Date : On-going from Sep 2019
2. Project Title : Type / Proof Tests of Flash Butt Welding Uic54 Rail Joint to BS EN 14587-1:2018 For The Tema-Akosombo Rail Line, Ghana Company : AFCONS INFRASTRUCTURE LIMITED, INDIA Amount : RM 110,000.00 Completion Date : On-going from Aug 2019
3. Project Title : The Development of New Pole Design for HV 33kv,11 kV ABC
Line, Communication Line and Street Light for TNB Distribution System Company : TNB RESEARCH (MALAYSIA) SDN. BHD Amount : RM 220,000.00 Completion Date : On-going from July 2019
4. Project Title : Prestressed Concrete Sleeper and Assembly Approval Test Tests for The Construction of Single Line Dual Gauge Railway Track from Dohazari to Cox’s Bazar Via Ramu and Ramu to Gundum Near Myanmar Construction Supervision Consulting Services – 1 For Dohazari – Ramu – Cox’s Bazar Section, Bangladesh. Company : CCECC – MAX JV (CONTRACTOR OF LOT 2 OF DCRP) Amount : RM 250,000.00 Completion Date : On-going from Jun 2019
5. Project Title : Sag Analysis of Low Voltage Aerial Bundle Cable (LVABC) Company : TNB RESEARCH (MALAYSIA) SDN. BHD Amount : RM 162,000.00 Completion Date : On-going from Jun 2019
6. Project Title : Verification of Toe Load Capacity Through Testing According BS EN 13146-7:2012 for Gemas – JB Project Company : EASTERN PRETECH (MALAYSIA) SDN. BHD Amount : RM 24,00.00 Completion Date : On-going from May 2019
7. Project Title : Plasform Plastic Panel Structural Performance Development and Laboratory Assessment Company : JET FORMWORK &SCAFFOLD SDN BHD Amount : RM 57,000.00 Completion Date : On-going from October 2018
8. Project Title : Ballast Analysis Used in The Construction of Single Line Dual
Gauge Railway Track from Dohazari to Cox’s Bazar Via Ramu and Ramu to Gundum Near Myanmar Construction Supervision Consulting Services – 1 For Dohazari – Ramu – Cox’s Bazar Section, Bangladesh Company : CCECC – MAX JV (CONTRACTOR OF LOT 2 OF DCRP) Amount : RM 33,700.00 Completion Date : OCTOBER 2018
9. Project Title : Thermal Analysis in PPU Cable Cellar
Company : TNB RESEARCH (MALAYSIA) SDN. BHD Amount : RM 135,00.00 Completion Date : NOVEMBER 2018
10. Project Title : Structural Integrity Test of RC Sleeper and Fastening System
for Gemas – JB Project Company : EASTERN PRETECH (MALAYSIA) SDN. BHD Amount : RM 180,00.00 Completion Date : OCTOBER 2018
11. Project Title : Modulus of Elasticity and Compressive Strength of Russian
Pine Wooden Sleeper Company : PADU SEDIA SDN BHD Amount : RM 10,900.00 Completion Date : OCTOBER 2018
12. Project Title : Projek Pembangunan Kilang Kertas Berteknologi Tinggi Oleh Merc Resources Sdn Bhd Usahasama Bersama Jabatan Mineral Dan Geosains Malaysia, Kementerian Sumber Asli & Alam Sekitar (NRE) Company : MERC RESOURCES SDN BHD Amount : RM 200,000.00 Completion Date : AUGUST 2017
13. Project Title : Insulated Joint Rails Structural Test - Phase III - Slow Bend and Fatigue Tests for KTMB
Company : TRACK WORK AND SUPPLIES SDN BHD Amount : RM 31,800.00 Completion Date : AUGUST 2017
14. Project Title : Bending and Compression Test of Y-JACK RC Pile Phase II Company : UTHM HOLDING Amount : RM 25,440.00 Completion Date : JULY 2017
15. Project Title : Insulated Joint Rails Structural Test - Phase II - Slow Bend and Fatigue Tests for TWS
Company : TRACK WORK AND SUPPLIES SDN BHD Amount : RM 37,100.00 Completion Date : JULY 2017
16. Project Title : Insulated Joint Rails Structural Test - Phase I - Slow Bend Test for TWS
Company : TRACK WORK AND SUPPLIES SDN BHD Amount : RM 26,500.00 Completion Date : MARCH 2017
17. Project Title : Uitm (Malaysia) – Shah Cement Co. (Bangladesh) Training On Advanced Cement and Concrete Materials
Company : SHAH CEMENT CO. (BANGLADESH) Amount : RM 50,000.00 Completion Date : JANUARY 2017
18. Project Title : Tensile Strength Test for Reinforcing Bar
Company : TUAN USAHA SDN BHD Amount : RM 4,876.00 Completion Date : DECEMBER 2016
19. Project Title : Consultancy Services for Independent Review on the
Cracked Track Slab at Bukit Berapit Tunnel on the Main Line
Company : MMC-GAMUDA Amount : RM 135,000.00 Completion Date : DECEMBER 2016
20. Project Title : Bending Test of RC Beam Strengthened with CFRP
Company : SCE-SINGFA SDN BHD
Amount : RM 29,000.00 Completion Date : OCTOBER 2016
21. Project Title : Bending and Compression Test of Y-JACK RC Pile Phase I
Company : UTHM HOLDING Amount : RM 22,000.00 Completion Date : JUNE 2016
22. Project Title : Aeolian Vibration and Climatic Aging Testing of MV ABC Pre-Fabricated Joints and Terminations for the Project TNBR
Company : TNBR Amount : RM 361,000.00 Completion Date : APRIL 2012
23. Project Title : Tensile Strength Test Untuk Projek: Umt K.Trg (Blok Hatchery)
Company : PEMBINAAN MAN SDN BHD Amount : RM 2,100.00 Completion Date : FEB 2012
24. Project Title : Tensile and Bending Strength Test for Reinforcing Bar
Company : INNOVEDGE CONSTRUCTION SDN BHD Amount : RM 1,200.00 Completion Date : DEC 2011
25. Project Title : Peningkatan Proses Pembuatan 350mm x 50 mm Pre-
Stressed Concrete Slabs
Company : IBS PRESTRESS TECHNOLOGY SDN BHD
Amount : RM 250,000.00 Completion Date : DEC 2010
26. Project Title : Tensile and Bending Strength Test for Reinforcing Bar
Company : MIRA MURNI SDN BHD
Amount : RM 2,600.00 Completion Date : DEC 2010
27. Project Title : Compression Test of Foamed Concrete Wall
Company : UKM
Amount : RM 8,650.00 Completion Date : OCT 2010
28. Project Title : Assessment of Reduced Modulus Action in Steel Sheet Piles Using Experimental Tests Company : SIRIM BHD
Amount : RM 60,800.00 Completion Date : OCT 2010
29. Project Title : Industrialsed Building System (IBS) – ujian beban Ribbed
Panels
Company : SABA CONSULTANT SDN BHD
Amount : RM 33,000.00 Completion Date : JULY 2010
30. Project Title : Cadangan Penjara Tegar, Lembah Klang, Ijok, Kuala Selangor,
Untuk Kemeterian Dalam Negeri, Jabatan Penjara Malaysia
Company : NADI CONSULT ERAI SDN BHD Amount : RM 10,000.00 Completion Date : JUNE 2010
31. Project Title : Tensile and Bending Strength Test for Reinforcing Bar
Company : NEWBRIDGE SYNERGY SDN BHD Amount : RM 2,320.00 Completion Date : MAY 2010
32. Project Title : Development of Newly Designed Paving – Load Test
Company : SUNWAY PAVING SOLUTIONS SDN BHD Amount : RM 2,000.00 Completion Date : APRIL 2010
33. Project Title : Tensile Strength: UMT Pakej 2C, Kuala Terengganu
Company : SYARIKAT PEMBINAAN MAN SDN BHD
Amount : RM 3,600.00 Completion Date : FEBRUARY 2010
34. Project Title : Consultant (Independent Checker) For Project “Bangunan Tambahan Baru Inspen (Annex Block) Daerah Sepang, Selangor (Reka Dan Bina)
Company : TECHART SDN BHD Amount : RM 25,000.00 Completion Date : JANUARY 2008
35. Project Title : Huatraco Shoring System Test
Company : HUATRACO SDN BHD Amount : RM 21,000.00 Completion Date : OCTOBER 2007
36. Project Title : Precast Concrete Sheet pile Wall – Load Test
Company : RIVO PRECAST SDN BHD Amount : RM 9,000.00 Completion Date : APRIL 2007
PRIVATE FUNDED PROFESSIONAL TRAINING AND VISIT 1. Training Title : Safety, Maintenance and Inspection for Railway Track
Company : EMRAIL SDN BHD Location : Perth, Australia Amount : RM 16,500.00 Duration : 30 JUNE – 14 JULY 2018
2. Training Title : FAT for Sleepers and Bearers Dynamic Testing Machine Company : Ekslusif Alfa Enterprise Location : Ankara, Turkey Amount : RM 6,500.00 Duration : 24 – 28 JUNE 2018
3. Training Title : Design of Point crossing and Turnout Company : TWA (Malaysia) SDN BHD Location : GERMANY AND AUSTRIA Amount : RM 52,050.00 Duration : 2 – 16 OCT 2017
TECHNICAL WORKING GROUP COMMITTEE (TWG) 1. MS 1462 - Part 1: Metal Scaffolding - Prefabricated Scaffolds - Specification for Steel
Frame Scaffolding. 2. MS 1462 - Part 2-1: Metal Scaffolding - Tabular (Tube and Coupler) Scaffolds -
Specification for Steel Tubes. 3. MS 1462 - Part 2-2: Metal Scaffolding - Tabular (Tube and Coupler) Scaffolds -
Specification for Aluminium Tubes. 4. MS 1462 - Part 2-3: Metal Scaffolding - Tabular (Tube and Coupler) Scaffolds -
Specification for Steel and Aluminium Couplers, Fitting and Accessories.
