CURRICULUM VITAE 1. Family name: AL-Tahat 2. First name: …engineering.ju.edu.jo/.../76/IND-Al-Tahat-Sep-2013-1st.pdf · 2017-10-23 · Page 1 of 15 CURRICULUM VITAE 1. Family name:

Page 1 of 15

CURRICULUM VITAE

1. Family name: AL-Tahat

2. First name: Mohammad, Dheif - Alla Al - Ahmad

3. Date of birth: 20/11/1968

4. Nationality: Jordanian

5. Contact Information: Mobile: 00962 777 635 219

E-mail: [email protected]

[email protected]

6. Civil status: Married,

7. Family members: 8

8. Brief biographical sketch:

Professor Mohammad D. Al-Tahat is a university full professor of industrial engineering

with the University of Jordan, where he teaches and conducts several research works in

the area of industrial and manufacturing engineering. He received the Bachelor’s degree

(B.Sc.) at 1990 in production and metallurgy engineering from the University of

technology in Iraq, the Master degree (M.Sc.) at 1993 in industrial engineering from the

University of Jordan, and the Philosophy degree (Ph.D.) at 2003 from the University of

Bologna in Italy. He worked with the Jordanian industry for more than 6 years as an

industrial and manufacturing engineer. His articles have appeared in many international

journals such as; Journal of the Franklin Institute, International Journal of Manufacturing

Technology Management, International Journal of Risk Management, International

Journal of Architectural Science Review, International Journal of Integrated Supply

Management, International Journal of Intelligent Manufacturing, among others. He has

taught many courses in the field of industrial engineering and manufacturing for both

undergraduate and graduate programs. He worked at the faculty of engineering and

technology in the University of Jordan as the Dean assistant for student's affair during the

academic year 2006/2007, he worked in the same faculty as a chairman of the industrial

engineering department for the academic years 2007/2008 and 2008/2009, then he

worked as an associate professor of industrial engineering with the University of Science

and Technology (JUST) during a sabbatical leave for the academic year 2009/2010.

Currently he is working as a professor of industrial engineering with the University of

Jordan.

9. Education and Qualifications:

Institution The University of Jordan, Industrial Engineering Department

Date November 19, 2012

Academic Title (Degree)

Title: Professor of Industrial Engineering

Major Industrial and manufacturing engineering


Date April.9, 2008

Academic Title Title: Associate Professor of Industrial Engineering

mailto:[email protected]

mailto:[email protected]

Page 2 of 15

(Degree)

Major Industrial and manufacturing engineering

Institution University of Bologna – Italy, DIEM department, Faculty of engineering.

Date 2000 - February 18, 2012

Degree Ph.D. in Design and Methods of Industrial Engineering

Dissertation Title Methods and Approaches in Design of Kanban-Based Lean Production System


Date 1990 - 1993

Degree M.Sc. in Industrial Engineering

Thesis Title Computer Aided Process Planning (CAPP).

Institution University of Technology, Baghdad. Republic of Iraq

Date 1986 - 1990

Degree B.Sc. in Production and Metallurgy Engineering

Major Production Engineering

Graduation Project Friction welding

10. Language skills (5 - excellent; 1 - basic):

Language Reading Speaking Writing

English 5 5 5

Arabic 5 5 5

Italian 3 3 3

11. Membership of professional bodies and committees:

- Reviewer for conferences and journals of WSEAS (World Scientific and Engineering Academy and Society) (http://www.wseas.org)

- Editorial Board Member of the International Journal of Advanced Science and Engineering Technology (IJASET), ISSN: 2225 – 9686. Greater Amman Municipality. http://www.ijaset.com

- Editorial Board Member of International Journal of Adaptive Infrastructure.

ISSN: 1740-2107. Inderscience publishers. http://www.inderscience.com/jhome.php?jcode=IJAIS.

- Editorial Board Member of Journal of Applied Sciences. Official publication of

the Asian Network for Scientific Information - Member of National Organizing Committee for International Conference of

Nanostructure Advances Materials, organized by University of Illinois, University of Jordan, Higher Council of Science and technology, and King Saud University, 10 -13 November 2008, Amman, Jordan.

- Member of Organizing and Scientific Committee for International Global Conference on Renewable Energy Approaches of Desert Regions GCREADER 2008, April 2009, Amman, Jordan.

- Member of Jordan Engineering Association - Founder and Member of Jordan Foundry men Association - Active member of Leading Cultural Forum LCF - Active member of Jordan Society for Ethics JSE

12. Present position: Professor of Industrial and Manufacturing Engineering/ The University of Jordan

13. Years within the firm: 11 Years

14. Major qualifications Industrial and Manufacturing Engineering

http://www.wseas.org/

http://www.ijaset.com/

http://www.inderscience.com/jhome.php?jcode=IJAIS

Page 3 of 15

15. Experiences

Country

Time Span

Period Description

From To

Jordan

Currently 19/11/2012 Now Professor/ University of Jordan/ industrial engineering department

3 Months 10/6/2012 9/9/2012 Acting chairman of the industrial engineering department/ University of Jordan

4.0 Years & 7 Months

9/4/2008 18/11/2012 Associate Professor/ University of Jordan/ industrial engineering department

1 year 13/9/2009 13/9/2010

"Visiting Associate Professor" for the Industrial Engineering department at the Jordan University of Science and Technology "(JUST) (Sabbatical leave)

2 Years 10/9/2007 12/9/2009 Chairman of Industrial Engineering Department/ University of Jordan

1 Year 10/9/2006 10/9/ 2007 Dean Assistant for student's affair/ Faculty of Engineering/ University of Jordan

3 Months 24/7/2006 9/9/2006 Acting chairman of the industrial engineering department/ University of Jordan

5 Years 1/3/2003 9/4/2008 Assistant Professor/ University of Jordan/ industrial engineering department

- Sep. 2005 Sep. 2007

Part time Lecturer at the department of Computer Information System (CIS) at the Jordan University of Science and Technology (JUST)

Italy 3 Years 8/2/2000 28/2/2003 Ph.D. researcher

Jordan 6 Months 7/8/1999 7/2/2000

Planning & Development Engineer at the Jordan University of Science &Technology, Operating and Maintenance Department

Jordan 4 Months 11/4/1999 23/8/1999

Head of Sales and Marketing Department in the commercial department at Arab Engineering Industries Company (AEICO)

Jordan 1 Year

& 3 Months

17/12/1997 10/4/1999

Sales and Marketing Engineer in the commercial department at Arab Engineering Industries Company (AEICO)

Jordan 1 Year

& 10 Months

22/4/1995 16/12/1997

Planning Engineer and Casting Technologist at Arab Engineering Industries Company (AEICO) Planning and Information department

Egypt 5 Months 1/12/1994 21/4/1995

Training on Foundry Management and Technology of Steel and Iron Casting, at Central Metallurgical Research and Development Institute – (CMRDI) Cairo / Republic of Egypt.

Jordan 1 Month 1/11/1994 30/11/1994 Industrial Engineer /Jordanian Investment Corporation

Jordan 1 Year

& 5 Months

14/6/1993 31/10/1994 Working as an Industrial Engineer in different Jordanian factories

Jordan 2 Years

& 8 Months

Sep. 1990 13/6/1993 Teaching assistant at the industrial engineering department as a Master student

A total of more than 26 Years of Variant Working Experience

16. Professional and teaching experience records:

Period-Date 19/11/2012 - Now

Location Jordan

Company The University of Jordan

Position Professor

Page 4 of 15

Description Academic teaching as recorded below, and research work in the field of industrial engineering as listed in the publication section of this CV.

Taught Courses

Course # Course Name Teaching

Frequency Semester

*

and Year Department University

0906525 Logistics and Supply Chain Management

2 S1, S2 2012/2013

Industrial Engineering Department

The University of Jordan

0906501 Special topics in Manufacturing

1 S1 2012/2013

0906421 Production Planning and control

1 S1 2012/ 2013

0906552 Operation Research -2 1 S2 2012/2013

0906412 Laboratory of Manufacturing Processes

4 S1, S2 2012/2013

0906703 Advanced Production Planning and Control

2 S1 ,S2 2012/2013

Industrial Engineering/ Master Programs

IE 342 Operations Research -1 1 S1 2012/2013 Industrial Engineering Department Jordan university for Science and Technology

CIS 383 Operations Research 1 S2 2012/2013 Computer Information System

Period-Date 10/6/2012- 9/9/2012

Location Jordan


Position Faculty Member Rank: Associate Professor Acting chairman of the industrial engineering department

Description Managing and directing the industrial engineering department in addition to the academic teaching and research work in the field of industrial engineering

Period-Date 13/9/2010 – 18/11/2012

Location Jordan


Position Associate Professor


Taught Courses


Frequency Semester

*

and Year Department University

0906411 Manufacturing Processes-2/metal cutting

2 Ss 2011/2012 Industrial Engineering Department

0906703 Advanced Production Planning and Control

3 S1,2010/2011 S1,2011/2012 S2,2010/2011

Industrial Engineering/ Master Programs


8

S1, S1, S2, Ss, 2010/2011 and S1, S2, S2, Ss, 2011/2012

Industrial Engineering Department 0906552 Operation Research -2 7

S1, S2, Ss, 2010/2011 and S1, S1, S2, Ss, 2011/2012

0906500 Special topics in Engineering Management

2 S2, 2010/2011 S1, 2011/2012


Many Frequently

IE 442 Operations Research 2 1 S1 2010/2011


Jordan university for Science and Technology

IE 541 Production planning and inventory control

1 S2 2010/2011

IE 440 Applied Engineering Statistics

1 Ss 2010/2011

IE 346 Manufacturing Processes 1 3 S1, S2, Ss 2011/2012

*S1= 1st Semester, S2= 2nd Semester, Ss= Summer Semester, followed by the academic year

Period-Date 13/9/2009- 13/9/2010 (Sabbatical leave)

Page 5 of 15

Location Jordan

Company Jordan University of Science and Technology (JUST)

Position Associate Professor


Taught Courses


Frequency Semester

*

and year Department University

IE 747 Lean and Agile production systems

1 S1 2009/2010 Industrial Engineering Department Master Program

Jordan university for Science and Technology

IE 342 Operations Research-1 2 S1, S2 2009/2010


IE 442 Operations Research -2 1 S1 2009/2010

IE 561 Tools Design 1 S1 2009/2010

IE 541 Production Planning and control

1 S2 2009/2010

IE 441 Quality Control 1 S2 2009/2010

*S1= 1st Semester, S2= 2nd Semester, Ss= Summer Semester, followed by the academic year

10/9/2006 - 12/9/2009 (3 Years)

Period-Date 9/4/2008- 12/9/2009

Location Jordan


Position - Faculty Member, Rank: Associate Professor - Chairman of the industrial engineering department

Description Managing and directing the industrial engineering department. Academic teaching as recorded below, and research work in the field of industrial engineering as listed in the publication section of this CV.

Taught Courses (9/4/2008- 12/9/2009)


Frequency Department University

0906701 Advanced Operations Research

2 Industrial Engineering/ Master Programs


0906500 Special topics in Engineering Management

1



2

0906552 Operation Research -2 2

0906411 Manufacturing Processes-2/metal cutting

1


5

Period-Date 10/9/2007- 9/4/2008

Location Jordan


Position - Faculty Member, Rank: Assistant Professor - Chairman of the industrial engineering department

Description Managing and directing the industrial engineering department. Academic teaching as recorded below, and research work in the field of industrial engineering as listed in the publication section of this CV.

Period-Date 10/9/2006 – 10/9/2007 (1 Years)

Location Jordan


Position - Faculty Member, Rank: Assistant Professor

- Dean Assistant for student's affair/ Faculty of Engineering and Technology

Description Managing, directing, coordinating and following-up academic and other students' needs within the faculty of engineering and technology. Academic teaching as recorded below, and research work in the field of industrial engineering as listed in the publication section of this CV.

Period-Date 24/7/2006- 9/9/2006 (3 Months)

Page 6 of 15

Location Jordan


Position Faculty Member Rank: Assistant Professor Acting chairman of the industrial engineering department

Description Managing and directing the industrial engineering department in addition to the academic teaching and research work in the field of industrial engineering

Period-Date 1/3/2003 - 24/7/2006

Location Jordan


Position Faculty Member Rank: Assistant Professor


Taught Courses (1/3/2003 - 24/7/2006 - 10/9/2006 – 10/9/2007 - 8/4/2008) (5 Years)


Frequency Semester

*

and year Department University

0906721 Design and Analysis of Production Systems

2 Industrial Engineering Master Programs


0906701 Advanced Operations Research 2

0906421 Production Planning and Control 6


0906552 Operations Research -2 5

0906311 Metal Forming 4

0906411 Metal cutting 2

0906310 Manufacturing processes 4


10

CIS 383 Operations Research 7

S1 2005/2006 S2 2005/2006 Ss 2005/2006 S1 2006/2007 S2 2006/2007 Ss 2006/2007

- Computer Information System (CIS) Department

Jordan university for science and

technology IE 561 Tools Design 1 S2 2004/2005


IE 442 Operations Research -2 1 Ss 2002/2003

Period-Date 8/2/2000 – 28/2/2003 (3 Years)

Location Italy, DIEM department at faculty of engineering.

Company University of Bologna

Position PhD Student and researcher

Description Researcher in the field of design and method of industrial engineering Dissertation Title: Methods and Approaches in Design of Kanban-Based Lean Production System

Period-Date 7/8/1999-7/2/2000 (6 Months)

Location Irbid, Jordan

Company Jordan University of Science and Technology (JUST)

Position Planning & Development Engineer in the department of operating and maintenance

Description - Planning and development engineer

Period-Date 11/4/1999-23/8/1999 (4 Months)

Location Jordan

Company Arab Engineering Industries Company (AEICO) - Irbid Steel Foundry - at AL - Hassan Industrial Estate

Position Sales & Marketing department head in the commercial section

Description - Marketing and feasibility studies - Strategic marketing & planning - Competitiveness, marketing, and customers classifications - Marketing information system - Promotions. Industrial and international fairs - Analysis of products performance and customer’s claims.

Page 7 of 15

Period-Date 17/12/1997-10/4/1999 (1 Year and 3 Months)

Location Jordan

Company Arab Engineering Industries Company (AEICO) - Irbid Steel Foundry - at AL - Hassan Industrial Estate

Position Sales & Marketing Engineer

Description - Marketing and feasibility studies - Strategic marketing & planning - Competitiveness, marketing, and customers classifications - Marketing information system - Promotions. Industrial and international fairs - Analysis of products performance and customer’s claims.

Period-Date 22/4/1995 – 16/12/1997

Location Jordan

Company Arab Engineering Industries Company. (AEICO)

Position Steel Casting technologist

Description - Measuring and drawing of castings (CMM. CAD). - Casting design (Properties, shape, material, heat treatment, and melting, molding, shake out, finishing)(AFS software) - Gating systems design and casting defects. - Risers design - Treatment of defects attributable to casting design - Patterns design. Prototyping. Castings performance

- Planning & Information Management (DEWTEC system)

- Computers in designing and planning of foundries

Period-Date 1/12/1994 - 21/4/1995 (5 Months)

Location Egypt

Company Central Metallurgical Research and Development Institute - (CMRDI)

Position Trainer

Description Training on Foundry Management and Technology of Steel and Iron Casting

Period-Date 14/6/1993 - 30/11/1994 (1 Year and 6 Months)

Location Jordan

Company Different Jordanian factories and corporation

Position - Industrial Engineer

Period-Date September 1991 – 13/6/1993 (2 Years and 8 Months)

Location Jordan

Company University of Jordan

Position - Master Student - Teaching Assistant in the laboratories of Industrial Engineering

Department. University of Jordan.

Description - Properties of engineering materials lab - Metrology lab. Prop. Of materials lab - Operation Research OR - Engineering economics - Workshop technology - Mechanical design.

17. List of publications:

1. AL-Tahat M. D., and Jalham S. I. (2013) " A structural equation model and a statistical investigation of lean-based quality and productivity improvement" Accepted on 18 July 2013 for publication in Journal of Intelligent Manufacturing (ISSN: 0956-5515).

Page 8 of 15

2. AL-Tahat M. D., Abdul Kareem M. Abdul Jawwad, and Yousef L. Abu Nahleh,

2012 "Ordinal Logistic Regression Model of Failure Mode and Effects Analysis (FMEA) in Pharmaceutical Tableting Tools". Engineering Failure Analysis (ISSN: 1350-6307), Vol. 27(2013), pp. 322-332.

3. AL-Tahat M. D. and Khaled M. Bataineh, (2012) "Statistical analysis and

Modeling of the Implementation of Agile Manufacturing Tactics in Industrial Firms". Mathematical Problems in Engineering (ISSN: 1024-123X).. Vol. 2012. Article ID 731092. 23 pages. doi:10.1155/2012/731092.

4. Doraid Dalalah, AL-Tahat M. D., and Khaled Bataineh. (2012) "Mutually Dependent Multi-criteria Decision Making", Fuzzy Information and Engineering,

Vol. 4, Issue 2, pp. 195-216. ISSN: 1616-8658.

5. AL-Tahat M. D. and Shahnaz M. Alkhalil. (2012), "Evaluation and Analysis of Lean-Based Manufacturing Equipment and Technology System for Jordanian Industries". Proceeding of the World Academy of Science, Engineering and Technology. Issue 64, April 2012, pp. 1455 - 1461. Paris, France. ISSN 2010-376X.

6. AL-Tahat M. D. and Ayman Abu Gharbieh A., “A statistical Comparative Study of ISO 9001:2000 Implementation in the Hashemite Kingdom of Jordan and in the United Arab Emirates", Accepted for publication in Dirasat, Engineering Sciences ( ISSN 1569-456X), April 2012.

7. AL-Tahat, M.D., and Al-Ali A. (2012) "Energy saving opportunities in Jordanian pharmaceutical industries", Perspectives of Innovations, Economics & Business, Vol. 10, Issue 1, pp.25-36. ISSN: 804-0519.

8. AL-Tahat, M.D., Al-Refaie, A. and Al-Dwairi, A.F. (2012) "Performance evaluation and analysis of a JIT–Kanban production system with sampling inspection", Int. J. Industrial and Systems Engineering, Vol. 11, No. 3, pp.225–249. ISSN: 1748-5037.

9. AL-Tahat M. D., Doraid Dalalah, and Mahmoud A. Barghash, (2012) "Dynamic programming model for multi-stage single product Kanban-controlled serial production line" International Journal of Intelligent Manufacturing (ISSN: 0956-5515). Vol. 23, no. 23, pp. 37-48, DOI 10.1007/s10845-009-0336-0.

10. AL-Tahat M. D. and A. Al-Refaie. (2012), “Activity-Based Cost Estimation Model for Foundry Systems Producing Steel Castings”. Jordan Journal of Mechanical and Industrial Engineering (JJMIE), Vol. 6, No.1, pp 75 – 86. ISSN 1995-6665.

11. Rami H. Fouad, Salman D. Al-shobaki, AL-Tahat M. D. and Al-Refaie Abbas. (2012), "Executive Manager’s Opinion about Just-In-Time Implementation Status: an Exploratory Study in the Middle East Industry", Global Journal of Researches in Engineering-G. Industrial Engineering (GJRE-G)). Vol. 12 Issue 1 Version 1.0. ISSN: 0975-5861. Publisher: Global Journals Inc. (USA)

12. AL-Tahat M. D. and Hasan Al-Shoubaki. (2012), "Knowledge Management of Maintenance Activities for Potable Water Distribution Business". Journal of Energy, Environment, and Economics (IJEEE). Vol. 20, no. 2, pp. 123-134 ISSN: 1054-853X.

13. AL-Tahat M. D. and Tayseer A. Daradkeh. (2011), "Investigating the Influence of TQM Elements on the Overall Performance of Jordanian Municipalities", Proceeding of the 4th WSEAS Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS’11). WSEAS, Barcelona, Spain, September 15-17, 2011, ISBN: 978-1-61804-031-2.

14. Mohammad Hayajneh, AL-Tahat M. D., Walid Kraisat, and Salman Alshobaki. (2011),"Experimental Investigation for the Elimination of Heat Treatment Related

Page 9 of 15

Distortion for the Production of 'Grizzly bar' Casting made of (12-14) % Manganese Steel", Proceeding of the 4th WSEAS Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS’11). WSEAS, Barcelona, Spain, September 15-17, 2011, ISSN: 1792-4693, ISBN: 978-1-61804-031-2.

15. Abbas Al-Refaie and AL-Tahat M. D., (2011) "Solving the multi-response problem in Taguchi method by benevolent formulation in DEA" International Journal of Intelligent Manufacturing, Vol. 22: pp. 505 - 521. DOI 10.1007/s10845-009-0312-8, ISSN: 0956-5515.

16. AL-Tahat M. D., A. Al-Refaie, and Fouad R. H., (2011) “Lean based performance improvement for the production of 5-Burners gas oven”. Journal of Information, Intelligence and Knowledge JIIK (JIIK), Vol. 3, No. 3. ISSN 1937-7983.

17. A. Al-Refaie, L. Ming-Hsien, AL-Tahat M. D., and Fouad R. H., (2011) “ Applying DMAIC procedure to improve performance of LGP printing Process”. International Journal Advances in Production Engineering and Management (APEM). Vol. 6, No. 1, pp 45 – 56. ISSN 1854 – 6250.

18. AL-Tahat M. D. and Ayman Abu Gharbieh A. (2011), “Evaluation of the Implementation of ISO 9001:2000 in the Hashemite Kingdom of Jordan and United Arab Emirates”. Proceeding of the 6th International Working Conference ’’TOTAL QUALITY MANAGEMENT - ADVANCED AND INTELLIGENT APPROACHES’’, With Second Special Conference ’’Manufacture in Serbia 2011’’, Belgrade, Serbia, June 7-11, 2011.

19. AL-Tahat M. D. and Ayman Abu Gharbieh A. (2010), “A study for implementation of ISO 9001:2000 based on organization type”. Proceeding of the International Science and technology Conference ISTEC - 2010. Turkish republic of northern Cyprus. Famagusta, October 27-29. 2010.

20. A. Al-Refaie, AL-Tahat M. D., and I. Jalham (2010), "A System Dynamics Approach to Reduce Total Inventory Cost in an Airline Fueling System". Proceedings of the World Congress on Engineering WCE 2010, Vol. I, June 30 - July 2, 2010, London, U.K. ISBN: 978-988-17012-9-9. ISSN: 2078-0958.

21. AL-Tahat M. D., (2010), "Effective Design and Analysis of Pattern Making Process Using Value Stream Mapping", Journal of Applied Sciences. 2010. Vol. 10. No.11.pp: 878-886. ISSN: 1812-5654. DOI: 10.3923/jas.2010.878.886

22. AL-Tahat M. D., and Eteir M. F., (2010), "An Investigation of the Potential of Implementing Kaizen Principles in Jordanian Industries". Int. J. Product Development, Vol. 10, Nos. 1/2/3. pp: 87-100.

23. Al Shboul A. A., AL-Tahat M. D., and Abu Ghanimeh A. (2009), " Fuel poverty in Jordanian households and residences: literature survey. Proceeding of GCREEDER 2009 Conference, Amman-Jordan. March 31st – April 2nd 2009.

24. AL-Tahat M. D., and Al Shboul A. A., (2009), "Identification and Implementation of Measures for Tangible Energy Savings at JTIC Factory, Jordan. Proceeding of GCREEDER 2009 Conference, Amman-Jordan. March 31st – April 2nd 2009

25. AL-Tahat M. D., (2009), "Re-engineering of production processes using Value Stream Mapping tool, case study: "ABC" Plant for producing tissue and hygienic paper". Journal of Information, Intelligence and Knowledge (JIIK) 2009, Vol. 1, Issue 3. pp. ISSN 1937-7983.

26. AL-Tahat M. D., and Rawabdeh I. A. (2008). "Stochastic Analysis and Design of CONWIP Controlled Production Systems". Journal of Manufacturing Technology Management. Vol. 19, No. 3 pp. 253-273, DOI 10.1108/17410380810847945.

Page 10 of 15

27. Abbasi G. Y., Sandouqa N. A., AL-Tahat M. D., Adnan M. Mukattash.(2007). "A look into Jordan’s Large Manufacturing Industries’ Risks. International Journal of Risk Management. Vol. 9, No. 2 pp.108-117

28. Al-Momani K. R., AL-Tahat M. D., Jaradat E. T. (2006), "Performance Measures for Improvement of Maintenance Effectiveness: A Case Study in King Abdullah University Hospital (KAUH)". Proceeding of the International Conference on Service Systems and Service Management (ICSSSM'06). University of Technology of Troyes. October 25-27 2006.

29. Al Shboul A. A., AL-Tahat M. D., (2007), "Modeling of Building Evacuation Processes Intended for Public Buildings", International Journal of Architectural Science Review. Vol. 50, No. 1, pp. 37-43.

30. AL-Tahat M. D., and Jalham S. I. (2008) 'Tracking production rate of CONstant Work-In Process (CONWIP) controlled job shop', Int. J. Integrated Supply Management, Vol. 4, No. 2, pp. 230 – 245.

31. Mukattash A., AL-Tahat M. D., (2006), "A developed Mathematical computerized approach for designing cellular manufacturing systems", Journal of Applied Sciences, Vol. 6, No. 9, pp.1915-1923, 2006. ISSN 1812-5654.

32. AL-Tahat M. D., Mukattash A. (2006), "Design and analysis of production control scheme for Kanban-based JIT environment", Elsevier, Journal of the Franklin Institute, Vol. 34, No. 3, pp. 521-531.

33. AL-Tahat M. D., (2005), "Optimizing of Work In Progress (WIP) in Kanban Controlled Production Lines". Dirasat, Engineering Sciences, Vol. 32, No. 2, pp. 123-132. ISSN 1569-456X.

34. AL-Tahat M. D. (2005), "A Queuing-Based Control Strategy for Kanban Controlled Manufacturing systems". Proceeding of the 3rd Minia International Conference for advanced trends in Engineering. 3-5 April 2005 Egypt. El-Minia.

35. AL-Tahat M. D. (2005), "Investigation of a Queuing-Based Coordination Method for a Single-Stage Kanban Controlled Supply Chain". Proceeding of the 1st National Conference on Logistics & Supply Chain 14-15 February 2005 Tehran. Iran.

36. AL-Tahat M. D. (2003), “Methods and Approaches in Design of Kanban-Based Lean Production System”. Dissertation thesis in design and methods of Industrial engineering under the supervision of, F. Persiani and A. Liverani, University of Bologna. Italy.

37. AL-Tahat M. D., A. Liverani, F. Persiani, G. Caligiana. (2002), “Using Genetic Algorithms to Optimize Kanban-based Production System”. Proceeding of the European Applied Business Research Conference. 2002, June 17 –21. Rothenburg-Germany

38. AL-Tahat M. D., A. Liverani, and F. Persiani. (2001), “Computer Supported Design of Flexible Kanban System for A Multi-Stage Multi-Product Manufacturing” Proceeding of the 1st International Industrial Engineering Conference. 2001, Sept.23-27. Amman-Jordan.

39. AL-Tahat M. D., A. Liverani, F. Persiani. (2001), “Design of a Marketing Decision Support Method for Price Quotation In a multi-Stage Single-product Kanban-Based Manufacturing Environment”. Proceeding of the XII ADM International Conference, 2001, Sept.5-7. Rimini – Italy.

40. AL-Tahat M. D., “Computer aided process planning”. Master Thesis in Industrial Engineering under the supervision of, Z. Tahboub, S. Al-Bermani.1993. The University of Jordan.

Page 11 of 15

18. Master thesis supervision

Student Name Thesis title Defense

Date S.N.

Omar Bawaliez عمر البواليز

Design and analysis of lean-based workforce management in Jordanian Industry

August 2012 1

Ayat Ahmad Wahbeh ايات وهبه

Predictive maintenance for medical equipment

Dec. 2011 2

Ayman M. Awad أيمن عوض

Optimal scheduling of preventive maintenance procedures for cigarette production line of Union Tobacco Company-Jordan.

Dec. 2011 3

Shahnaz Alkhalil شهناز الخليل

Development of an assessment tool for the implementation of lean production principles in the Jordanian industries

May 2011 4

Martin Khzouz مارتين خزوز

Life Cycle Cost Analysis to Examine Introducing Hydrogen as an Alternative Fuel in Jordan

April 2011 5

Areen Adel Husni Al-Ali عرين عا دل حسني العلي

Energy Saving Opportunities in Jordanian Pharmaceutical Industry

Nov. 2010 6

Yousef A. Abu Nahleh يوسف لطفي ابو نحلة

Failure Mode and effects analysis (FMEA) In the Pharmaceutical Tableting Tools

July 2010 7

Hassan Alshobaki حسن سليمان أحمد الشوبكي

Developing an Expert Operations and Maintenance Management System (EOMMS) in Jordan Water Company - MIYAHUNA

March 2010 8

Ayman F. Abu Gharbieh ايمن فاروق ابو غربية

A Comparative Study for ISO 9001:2000 Implementation in The Hashemite Kingdom of Jordan and United Arab Emirates state "

Dec. 2008 9

Diana S. Al-Rbihat بيحاتديانا سليمان ر

Process Re-Engineering of the Prevention and Self Protection Department at the Jordanian Civil Defense

Nov. 2008 10

Tayseer A. Daradkeh تيسير علي درا دكه

Applying the Concept of Total Quality Management In Irbid greater Municipality

Aug. 2007

11

Murad F. Eteir مراد فايز عطير

Studying the ability of Jordanian Manufacturing Companies to utilize the principles of Continuous Improvement (KAIZEN)

May 2007 12

Khaldoun B. Al-Shreideh خلدون بسام الشريدة

Analysis of KANBAN- Based JIT Production system based on Queuing Theory

May 2005 12

19. Evaluated Promotions and Reviewed Researches (Selected)

Date Country/Publisher Journal/ Institute etc. Subject/ Area of research S.N.

Evaluated Promotions

2013 Hashemite Kingdom of Jordan

Ajloun National University Promotion to Associate Professor of Marketing

1

2012 Kingdom of Suadi Arabia

Majmaah University Promotion to Associate Professor of Industrial Engineering

2


Jordan University of Science and Technology (JUST)

Promotion to Associate Professor of Industrial Engineering

3


Jordan University of Science and Technology (JUST)

Promotion to Associate Professor of Industrial Engineering

4

Selected Reviewed Awards

Page 12 of 15

2012 Ministry of higher education and scientific research

Scientific Research Support Fund/ The best thesis Award for academic Universities in Jordan

Maintenance of Medical Devices

1

Selected Reviewed Research Projects

2013 Ministry of higher education and scientific research

Scientific Research Support Fund

Detailed Proposal Evaluation, Submitted to the 2

nd research

cycle 2012. 1

Selected Reviewed Researches

2011 Springer Journal of Intelligent Manufacturing (JIM)

Neural Network Application in a non-traditional machining Process.

1

2011 Nova Science Publishers

Journal of Information, Intelligence and Knowledge (JIIK)

Markovian Modeling of EPQ 2

2011 Emerald Humanitarian logistics and Supply Chain Management

Lean and Agile management 3


A Neural Network Prediction of process Performance

4


Action plan management 5

2009 elsevier MEAS Evaluating measurement and process capabilities by GR&R with four quality measures

6

2008 Taylor and Francis Int. J. of Systems Science Meta-Heuristic Modeling of a Kanban System

7

2008 Inderscience publishers

Int. J. of Adaptive Infrastructures

Max-Plus Algebra Application in a Manufacturing Process.

8


Int. J. of Manufacturing Technology and Management

Definition of flexible transfer line with rework paths and its simulator for optimal production design

9


Transition to Lean production and ordering policies

10

2008 Hashemite University/ Jordan

Jordan Journal of Mechanical and Industrial Engineering

Stochastic analysis of maintenance system

11


Int. J. of Intelligent Systems Technologies and Applications

Genetic algorithm Application on flexible Transfer line

12

2012 & 2013

World Scientific and Engineering Academy and Society

WSEAS Conferences and Journals

More than 39 paper 13

20. Final Year projects supervision

1. For may 2013 2. For Jan. 2013 3. Ala'a Al-Hbashneh, Aseel Al-Soud, and Asma'a Al-Sadonee. Concurrent

Engineering. May 2012. 4. Liana Y. Mahmoud and Rawan S. Wadi. Lean based production planning and

inventory control systems. May 2012. 5. Bilal Abdulrazzaq, Mohammad Abo Alrob, Amer AL- Ghathban, and Ahmad

Alzubi. Design and analysis of lean based shop floor management system. January 2012.

6. Mohanned Seder, Maha Balawi, Thamer Al-Awamleh, and Omida Rasmi. Design and analysis of lean based processes technology and Know-How Management System. January 2012.

Page 13 of 15

7. Danna Abu Naaj, Doa'a Al-Atiyat, Rahmah, Almasri, and Farah Abu-Shattal. Design and analysis of lean based production planning and inventory control system. January 2012.

8. Ahmad Arafat, Ziyad AL-Bizreh, and Jawdat Higab. Design and analysis of lean based supplier relationship management system. January 2012.

9. Alhassan Ali, Ahmad Jaber, Issa Salman, and Nemer Albahrat. Design and analysis of lean based product design and development model. January 2012.

10. Mohammaed Zyadeh, Ahmad Abo-Arqoup, Yazeed Abu-Hamour, and Mohammed Sa''ed. Design and analysis of lean based layout design, case study: Al-Hussam Plastic Industries Co. May 2011

11. Halemah Atiyat, Muna AL-Rjailat, Ohood AL-Eiafan, and Zina AL-Nobani. Design and analysis of lean customer relationship management system, May 2011.

12. Diala AL-Hyari, Hiba Karadsheh, Nadeen Aburub, and Omer AL-Assi. Design and analysis of lean based workforce management system, May 2011.

13. Ahmad Fahmawi, Khalid Abdlqader, and Osama Zmeili. Design and analysis of lean based Quality and Productivity Improvement and measures system, May 2011.

14. Ahmad M.A. Mahasneh and Mohammad Na'amneh. Assessment of the implementation level of some lean management tools in Jordanian industries. May 2010.

15. Ala' Mubasher, Abeer Abd-Arrahman, and Linda Fakoury. Improvement of maintenance department at Ibn Alhaithem Hospital, January 2009.

16. Layth S. Haddad, Rawan S. Habash, and Sara M. Oweis. Transshipment modeling of Ghadeer distribution network, January 2009.

17. Seren Mukattash, Maha Ghrayyeb, and Shatha Ahmad. Analysis of Petri nets, May 2008.

18. Ehab Melhem, Rawan Al-Amr, and Fadi Al-Hourani. Implementation of Six Sigma Principles in Jordan Data Systems JDS, May 2008.

19. Yousef Mohammad, Mohammad Hasweh, Mohammad Mubideen, and Ahmad Maraqah. Energy Management at Jordan Tobacco International factory, May 2008.

20. Ahmad Al-Naser, Ahmad Al-Esawi, Ibrahim Omari, and Zaid Al-Jazi. Value Stream Mapping VSM, Petra Aluminum Company, May 2008.

21. Asem Thyabat, Houston, and Omar Jaradat. Lean-Based Analysis and Evaluation of National paints Production system: Alkyd department, January 2008.

22. Anood Efaishat, Hala Madanat, and Zeena Borgan. Value Stream Mapping. January 2008.

23. Mohammad Mahmoud, Bajis Al-Majali, Haneen Al-Sharaiha, and Mohammad Al-Thaher. Production Line Analysis for Crown Can Co. Ltd. May 2007.

24. Salah Mourtaga and Sahel Azizi. Implementation of Queuing Theory on Cairo Amman Bank May 2007.

25. Mohammad Abu Safieh, Fares Haddadin, and Hussein Tadros. An approach for seeking ABET accreditation for the industrial engineering department. May 2007.

26. Abdelkader Rawashdeh, Jamal Abdeen, Zaid Hassan, and Murtada Abu-Hadi. Effective design and analysis of gas cocker assembly line, case study: Rum-Aladdin Industries Company, May 2006.

27. Naeem Al-Kilany, Ayham Al-Masaadeh. Implementation of Total Quality Management principles in ARITAL Company. January 2006.

28. Mohammed S. Shatrit. Effective design of varnish cleaning system for ink industry. May 2005.

21. Industrial Projects and Technical Studies

1. Al-Tahat M. D., Sep. 2003. Process Improvement and productivity, a study

for Arab Engineering Industries Company AEICO. Supported through Faculty for Factory program 1st cycle 2003. University of Jordan.

2. Al-Tahat M. D., Sep. 2004. Analysis of Cost Estimating Method at Arab Engineering Industries Company AEICO. Supported through Faculty for Factory program 2

nd cycle 2004. University of Jordan.

Page 14 of 15

3. Al-Tahat M. D., Sep. 2005. Analysis and Design development of the Gas Cocker Assembly Line At Rum Metal Manufacturing Company. Supported through Faculty for Factory program 3

rd cycle 2005. University of Jordan.

4. Al-Tahat M. D., Sep. 2006. Design and Analysis of Effective Quality System and Methods for Arab Company for Italian wood Manufactures (ARITAL). Supported through Faculty for Factory program 4

th cycle 2006. University of

Jordan.

5. Al-Tahat M. D., Sep. 2007. Design and Analysis of Effective Production Planning and Control System for Company of National Paints Factories/ Sayegh Group. Supported through Faculty for Factory program 5

th cycle

2007. University of Jordan.

6. Al-Tahat M. D. and others, Oct. 2007. A study for heat treatment problems and evaluation of the pattern production technology At Arab Engineering Industries CO. (AEICO). Supported Through Higher Council of Science and Technology (HCST), Jordan.

7. Al-Tahat M. D. and others, Sep. 2008. Stand – Alone Photovoltaic Systems using solar energy for the ring road of Amman City, A feasibility and technical study, presented to ministry of public works and housing.

22. Training: The Following training programs were Conducted (I am The Trainer):

S. n. Country Place

Period of Time

Program Title

Training Hours

Participants Organizer

3 Kingdom of Saudi Arabia

Jeddah 30

th June – 4

th

July 2013

Inventory Control

40

Employees of Saline Water Conversion Corporation

Success Steps Training and Education

Company Ltd.


Jeddah 8

th – 12

th

June 2013 Inventory Control

40



Company Ltd.


Jeddah 11

th – 15

th

May 2013 Inventory Control

40



Company Ltd.

23. Training: The Following training programs were attended (I am a Participant):

1. Foundry Technology of Steel and Iron Castings. Central Metallurgical Research and Development Institute - (CMRDI) Cairo / Republic of Egypt. 1/12/1994 – 21/04/1995.

2. Main problems in steel casting production. INSTYTUT ODLEWNCTWA W Krakowie. Republic of Poland. April 1996.

3. Advance AutoCAD 3D at Jordan Star system company / Irbid- Jordan. 27/9/1995- 27/12/1995.

4. Operating Measuring Machine Working With SOFTIOS 3D System by the Institute of Metal Cutting. Republic of Poland. February 1997.

5. Foundry Management Software DEWTEC. DEWTEC Systems Limited. March 1999.

6. One month of training on “Foundry Technology” at Foundry Research Institute (FRI)-Republic of Poland.

7. AutoCAD 12, university of Jordan, Amman, Jordan. 11/6/1995-19/7/1995. 8. Excellent In the Art of Selling” at Arab Consultants Company, Jordan. December

1998. 9. Novell 4.1 Administration. Computer and Communications Systems. Jordan.

February 1997. 10. Pricing strategies and competition. Jordan institute of management, Amman,

Jordan. April 1999.

Page 15 of 15

11. Primavera project planner (P3) for project planning and control" at Jordan University of Science & Technology. Jordan University for Science and Technology. September 1999.

12. Advances in computer aided materials engineering (Rapid prototyping and remote manufacturing). Trieste. Italy. 9-11 December 2004.

13. Statistical Packages for Social Sciences "SPSS", University of Jordan, September 2008.

14. Knowledge Management in Modern Organizations, University of Jordan, August 2008.

15. Human Resource Management, University of Jordan, September, 2008.

Last updated: July 13, 2013

Documents

CURRICULUM VITAE 1. Family name: AL-Tahat 2. First name: …engineering.ju.edu.jo/.../76/IND-Al-Tahat-Sep-2013-1st.pdf · 2017-10-23 · Page 1 of 15 CURRICULUM VITAE 1. Family name: