CTS 700 control700+GB.pdf · CTS 700 control New features Night setback It is possible to use the week programme to set the unit to night setback, if desired. It is also possible

Seite Nilan Presentation /

CTS 700 control


Agenda

1. Introduction • Which products will receive the CTS 700 control

2. CTS 700 control

• Control panel • New features • User option: User • User options: Super User/Installer

3. Coming updates


Introduction

From January 1st 2015, CTS 700 will be standard on following products:

• Comfort CT300 • Comfort CT300 Polar

• Compact P

• Compact Polar • Compact P Nordic • AIR 9 (replaces UVP5) (SCOP 5,0) • GEO 3 (SCOP 5,17) • GEO 6 (SCOP 5,15)


CTS 700 control

Starting point

• The CTS 700 control has the same functions as CTS 602 • Some settings have to set or installed in another way • New and great features


CTS 700 control

Control Panel

• As default delivered in white casing • It is possible to order a black casing • A mounting bracket and screws for installing is included


CTS 700 control

Control panel

• The control panel is as standard attached with 3 m cable • A 20 m cable can be ordered as an accessory

• Cable type is: PDS Cat 5e


CTS 700 control

Display • Larger monitor • Colour display • Great overview • Easy to navigate

• Help text

This gives a more user friendly control


CTS 700 control

Display

Fan speed

Temperature SHW-tank

Temperatur on the solarpanel

Indoor temperatur Outdoor temperature

Clock

AIR 9

GEO 3 og 6

Main menu


CTS 700 control

Alarm message

Warning


CTS 700 control

Alarm message

Alarm


CTS 700 control

Navigation • Sheer the ”wheel” right/left

• To change between main menus • Navigate up/down in sub-menus • Change setting values

• Press ”OK” to enter a menu

• And to accept an installation • A bip-tone confirms click

• Press “Arrow back” to go backward in menus

• And to exit a setting without making changes


CTS 700 control

Menu structure

Home

Information

Settings

Standby

Fan

Temperature

Shows current main menu Help text

Sub-menu

Current setting or operation


CTS 700 control

USB port • Software update

• Control panel • Main board • Slave board

• Language update

New software will be available as download on NilanNet


CTS 700 control

New features Compact P with • AIR 9 • GEO 3 • GEO 6

Now only one control panel! Before: CTS 602 (Compact P) + LMC 223 (heat pump)


CTS 700 control

Benefits with one control panel • Settings are conducted the same place • Alarms appears on the same display • The automatic is set so the ventilation and heat pump does

not work against each other • However is it possible to operate with floor heating

during the summer and at the same time ventilate in cooling mode (a ”non critical” alarm will be shown)


CTS 700 control

New features AIR 9 can cool the home via the central heating just like GEO 3/6.


CTS 700 control

New features Automatic log of operational data • Logs every 10. minutes

• Memory to store data for 14 days • Also logs data at the alarm time

• Possible to log data on a USB stick

• Logging can be set to a shorter range


CTS 700 control

New features Night setback It is possible to use the week programme to set the unit to night setback, if desired. It is also possible to set the night setback via an external signal, which is activated by user option. (overrules week program)


CTS 700 control

New features Legionella control • It is possible to start legionella control manual

• This is an advantage e.g. after a vacation where SHW production has been on standby

• It is still possible to set the unit automatically to run legionella control


CTS 700 control

New features An expansion PCB is no longer needed. At the CTS 602 control it is often needed to purchase an expansion PCB, if extra functions were wanted. It is no longer necessary with CTS 700 since the circuit board is expanded with the necessary entry and exit points

Entry and exit points can be seen at the I/O-list, which can be downloaded from NilanNet.


CTS 700 control

New features Control of EHD/BAH damper • EHD for energy tubes • BAH for water pre-heating element

• Measures temperature after set period e.g. every 6 hours

• Chooses the optimum intake adjusted to operation state

Roof cap

EHD damper

Energy tubes


CTS 700 control

User – User access

Home • Standby – turn the unit on or off

(is not advisable)


CTS 700 control


Information • Event log (List of alarms)

• Browse log • Acknowledge event log • Event list sort mode

• Units • System state • Software version • Product


CTS 700 control


Settings • General settings

• Time and date

• Units • Legionella function • Filter change

• Change user level


CTS 700 control


Standby • Compact P

• Pause ventilation • Pause SHW production • Pause all • Standby • Auto manual operate • Heating manual operate • Cooling manual operate

• AIR 9 • Pause • Standby


CTS 700 control


Fan • Ventilation

• 20 – 100 %


CTS 700 control


Temperature • Compact P

• Air • Hot water

• AIR

• Central heating • Hot water


CTS 700 control

Super user/installer

Home • Week programs • Compac

• Extended programs • User on/off capability* • Standby

* Only for Installer


CTS 700 control


Information • Event log (List of alarms)

• Browse log • Acknowledge event log • Delete event log* • Event list sort mode

• Units • System state • Devices • Software version • Product

*Only for Installers


CTS 700 control


Settings • Network settings • General settings

• Time and date • Language • Display • Buzzer mode

• Setings for units • Solar settings • Change user level • Service

• Software update • Super user validation • Log off to user level • Save current settings • Restore saved settings • Restore factory default • USB drive


AllowHeat deadband – 3 °C

CTS 700 control


Settings

AllowHeat deadband (°C) Allows external heating system when: Room temp (T3) < Temp. set point +/- ”AllowHeat deadband” – 1 °C Blocks external heating system when: Room temp (T3) > Temp. set point +/- ”AllowHeat deadband”

20 °C

- 1 °C

< 16 °C Allows external heating system > 17 °C Blocks external heating system


CTS 700 control


Standby • Compact P

• Pause ventilation • Pause SHW production • Pause all • Standby • Auto manual operate • Heating manual operate • Cooling manual operate

• AIR 9 • Pause • Standby


CTS 700 control


Fan • Fan speed • Fan speed offset • High fan speed enable • Low outdoor temperature • Low air humidity • High air humidity


CTS 700 control


Temperature • Summer / Winter T (°C) • Summer / Winter offset T (°C) • Night setback temp (°C) • Compact • AIR • Tpanel (°C)


Summer/winter offset 2 °C

CTS 700 control


Temperature

Summer/winter mode change

12 °C

Summer/winter offset 2 °C

Outdoor temp (T1) < 10 °C winter mode starts

Outdoor temp (T1) > 14 °C summer mode starts


Regulate deadband 2 °C

CTS 700 control


Temperature

Regulate deadband

20 °C

Regulate deadband 2 °C

Offset for cooling 2 °C Offset for bypass 1 °C

Room temp < 18 °C active heating or heating element starts

Room temp > 23 °C bypass opens

Room temp > 24 °C active cooling starts


CTS 700 control

Coming updates • PC applikation for installers

• Give you the possebility to make a service-contract • Option for weather compensation with pre-selected graphs • Flow alarm for GEO and AIR plus common alarm • Acoustic alarm at a critical alarm • Setup guide


CTS 700 control

Do you have further questions?

Documents

CTS 700 control700+GB.pdf · CTS 700 control New features Night setback It is possible to use the week programme to set the unit to night setback, if desired. It is also possible