1-2

FRM220-E1/T1

FRM220-ET100

FRM220-DATA

FRM220-DS3/E3

FIBER Modem

E1

V35

Ethernet

E1

V35

Ethernet

FRM220-FXO/FXS

POTS over Fiber

PABXFXO/FXS

/FXS

FRM220-10GE-TX

FRM220-10GE-TS

FRM220-100M

FRM220-1000MS

FRM220-1000M

FRM220A-1002ES

FRM220A-1000EAS/X

FRM220A-FSW103

FRM220-1000EAS/X-1

Ethernet Access

CPE

FRM220-Serial

SCADA

FRM220-MD40 WA/WB

FRM220-MD80 WA/WB

FRM220-MD40, FRM220-MD80

FRM220-MX210

CWDM (MUX/DEMUX)

10G/4G/2.7G

MUX/DEMUX

/DE

/4G/2.

10G/4G

FRM220A-Eoe-1

FRM220A-iMUX 5 (5 E1)

FRM220A-iMUX 8 (8 E1)

FRM220A-iMUX 16 (16 E1)

Router

Ethernet over PDH

FRM220-10G/4G/2.7G

FRM220-1000DS

10G 3R Transponder

Router

10G

FRM220-FOM01

FRM220-FOM04

P2P FOM

E1

Ethernet

Module Cards for Deployment Scenarios FIBER

E1

V35

Ethernet

Phone

Serial

FRM220-CH20 & FRM220A-CH20

www.ctcu.comCTC UNION TECHNOLOGIES CO., LTD.

FRM220-CH20In-Band Managed Multi-Service Platform

The FRM220-CH20 or FRM220A-CH20 is a 2U high 19" Rack, 20-Slot modular media converter chassis with redundant power

and all hot swappable design. It provides an economic solution in high density fiber converter installations in enterprises

or central offices. Particularly, FRM220A chassis supports uplink Gigabyte Ethernet switch, for efficient scalability and easy

deployment in access networks. All critical components, Power, fans, management module and interface cards are hot

swappable, allowing online field replacement. The chassis also has a pair of alarm relays and is able to stack up to 10 chassis

as one management IP address. A number of cards are available that support different protocols including Ethernet, Voice,

Data, transponders, FOM and IMUX.

Multi-Service Platform - Chassis

Specifications

Connectors Console RS232(DB9)

LAN 10/100 Base TX RJ45

Physical Specifications

Dimensions 438 x 303 x 88mm(W x Dx H)

Weight 5.2kg w/o power supply

Power Characteristics AC 100 ~ 240VAC

DC24 18 ~ 36VDC

DC48 36 ~ 75VDC

Temperature Operating 0 ~ 60°C

Storage -10 ~ 70°C

humidity 5% ~ 90% non-condensing

Predicted MTBF 65,000 hrs

Certification FCC class A, VCCI class A, CE, RoHS

Features

2U 19” 20-slot Chassis with AC/DC power redundancy

Chassis backplane consists of passive components

All modules and cards support hot-swapping

Chassis supports uplink Gigabit Ethernet switch 4-port 10/100/1000Base-T

+ 4-port 1000Base-X SFP trunk card (FRM220A-CH20 only)

E1 Inverse Multiplexers are supported by Gigabit Switch

Two alarm relays

Chassis cascade up to 10 with one IP management (FRM220-CH20 only)

The FRM220 series is positioned as a multi-service platform. All of the interface cards can be categorized in eight deployment

scenarios to easily understand and select.

FRM220 Cards for Deployment Scenarios

FRM220A-CH20Ethernet Aggregation Platform

FRM220-CH20 , FRM220A-CH20

1-3

1FRM220-CH20

Single or optional

redundant power supplies

Thermal Fan

(Hot swappable)

Thermal Fan

(Hot swappable)

rmal Fan Therma

FRM220A-GSW/SNMP

Two Alarm Relays

Gigabit Ethernet Aggregation Switch Card

FRM220A-CH20FRM220A-CH20

Single or optional

redundant power supplies

FRM220-NMC

Thermal Fan

(Hot swappable)

Thermal Fan

(Hot swappable)

Therma

Chassis cascade up to

10 with one IP management

UTP cable

rmal Fan

FRM220-CH20 Chassis Cascade

Two Alarm Relays

Master

Slave1

Slave9

w w w.c tcu.comCTC UNION TECHNOLOGIES CO., LTD.

Main Features

Chassis Overview

Multi-Service Platform - Chassis

Both chassis power supplies are hot swappable and modular. Installing two into a chassis provides redundancy should a single power supply fail. A fully

loaded chassis can run continuously with only one power module fitted into the chassis.

Power Redundancy

To further increase system reliability, the FRM220-CH20 or FRM220A-CH20 chassis is fitted with two hot swappable fan modules. Both fan modules can be

easily removed from the rear of the chassis, without interruption to the operation of the line cards.

Cooling Fan

The FRM220-CH20 has been designed as a Multi-service platform. This allows network administrators to deploy the chassis in a wide range of networks.

Technologies supported by the chassis included Fast/Gigabit Ethernet, E1/T1, V35/X21/RS-530, Serial RS-485/RS-422, Voice FXO/FXS, Repeater, Fiber

Multiplexer, E1 Inverse Multiplexer, CWDM Mux/DeMUX and 10G 3R Transponder.

Multi-Protocol Support ( FRM220-CH20 only )

The FRM220-CH20 Chassis features cascadable management which allows managing a stack (up to 10 chassis) from a single IP address. Chassis are

interconnected with standard UTP cables that carry control signals. Each chassis has its own ID, starting with the master chassis ID0 and cascading up to ID9

Chassis Cascade ( FRM220-CH20 only )

The FRM220-CH20 chassis provides an NMC (Network Management Controller) card which must be installed into the first slot of chassis. The NMC card

allows a network administrator the ability to configure and monitor the status of the blades. Management can be achieved locally over RS232, or over

the network by Telnet, Web or SNMP. If the blades support Ethernet in the First Mile (IEEE 802.3ah), then the management module can also configure and

monitor the status of a remote blade.

Network Management ( FRM220-CH20 only )

The FRM220A-CH20 incorporates a 24+4 Gigabit Ethernet Switch. Twenty ports supply each slot of the 2U 20-slot chassis with an electrical gigabit Ethernet

uplink with the remaining four electrical gigabit ports accessible via the rear of the chassis. The additional four ports are provided by SFP sockets.

All eight gigabit ports (4+4) are usable without restrictions for uplink aggregate to the Ethernet Metropolitan Area Network (E-MAN).

The FRM220A-GSW/SNMP card transmits Ethernet between the subscriber equipment (bridge/modem or network interface card) and the E-MAN.

The card provides a user-networking interface with Ethernet packets. This card is capable of providing high bandwidth for assembling Ethernet traffic.

The FRM220A-GSW/SNMP card is not only the system aggregate/trunk module, but also the system's control module, providing OAM/IP Management function.

Gigabit Ethernet Switch with Network Management ( FRM220A-CH20 only )

FRM220-CH20 , FRM220A-CH20

Ch

assis

1-4 www.ctcu.comCTC UNION TECHNOLOGIES CO., LTD.

FRM220 & FRM220A Application Diagram

Multi-Service Platform - Chassis

FIBER

Ethernet

Internet

FRM220-1000M

FRM220-10GE-TS

FRM220-ET100

FRM220-10/100A

220-10

00M

220-10GE-FRM220

220-10

220-10

220-10

220-ET

220-10

FRM220-NMC inserts in

FRM220-CH20 Chassis

FRM220-CH20

Router

Ethernet Switch

FRM220A-1002ES

FRM220A-iMux5

FRM220A-FSW103

FRM220A-1000EAS/X

220A-1

20A-

220A-F

220A-1

A-1000

A-1

20A-iM

FRM220A-CH20

Router

LAN

LAN

LAN

LAN

LAN

LAN

LAN

LAN

EMS

FRM220A-GSW/SNMP

Ethernet Switch card inserts in

FRM220A-CH20 Chassis

Chassis

FRM220 –

Example: FRM220 – CH20

FRM220 –

Example: FRM220 – AC

Model Name Type Description

FRM220-CH20 Chassis 2U 20-Slot rack mount chassis with 20 line card blank plate

FRM220A-CH20 Chassis 2U 20-Slot rack mount chassis with 20 line card blank plate

FRM220-AC Power Chassis power module 100 ~ 240 VAC, IEC connector 200W

FRM220-DC24 Power Chassis power module 18 ~ 36 VDC, 3 pin terminal block 200W

FRM220-DC48 Power Chassis power module 36 ~ 72 VDC, 3 pin terminal block 200W

Ordering Information

Chassis Type Slot Power Type NMC Ethernet Aggregation Card Chassis Cascade

FRM220-CH20 20 AC, DC, AD, AA, DD

FRM220A-CH20 20 AC, DC, AD, AA, DD

FRM220-CH08 8 AC, DC, AD, AA, DD

Note: AC: AC Power DC: DC Power AD: AC+DC Power AA: AC+AC Power DD: DC+DC Power

Comparison Table

Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.

FRM220-CH20 , FRM220A-CH20