Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
5
4
3
2
564 #{149}Radiology August 1996
CT Angiography with Volume Rendering: Advantagesand Applications in Splanchnic Vascular Imaging’
Pamela T. Johnson, MDDavid G. Heath, PhDBrian S. Kuszyk, MDElliot K. Fishman, MD
The authors compared volume render-ing with maximum intensity projection(MIP) and shaded surface display as atechnique for generating three-dimen-sional (3D) images of the vasculaturefrom spiral computed tomography (CT)data sets. In four patients with patho-logic splanchnic vasculature, the ad-vantages of volume-rendered dis-play are illustrated for depiction of 3Dvascular anatomy, vascular and visceralinterrelationships, variant vasculature,tumor encasement, and hepatic tumorlocalization for presurgical planning.
Index terms: Abdomen, CT, 95.12917,
96.12917 #{149}Angiography, technology #{149}Arte-ries, CT, 95.12917, 96.12917 #{149}Computed to-mography (CT), helical technology, 95.12915,
96.12915 #{149}Computed tomography (CT), three-dimensional, 95.12917, 96.12917 #{149}Computed
tomography (CT), maximum intensity projec-
tion #{149}Computed tomography (CT), volumerendering #{149}Computed tomography (CT), tech-nology #{149}Veins, CT, 95.12917, 96.12917
Radiology 1996; 200:564-568
M ANY authors have reported theclinical utility of computed tomo-
graphic (CT) angiography with maxi-mum intensity projection (MIP) andshaded surface display (1-4). Volumerendering is a third technique for gen-erating three-dimensional (3D) imagesfrom CT data sets, but traditionally
computer constraints have limited itsuse (5). Recent advancements in data
collection, computer processing, and
display technology, however, have
transformed volume rendering into apractical, versatile, and potentiallymore accurate means of creating CTangiograms (6).
I From the Russell H. Morgan Department of
Radiology and Radiological Science, The JohnsHopkins Medical Institutions, 600 N Wolfe St.Baltimore, MD 21287. Received January 31,1996; revision requested February 29; revisionreceived March 26; accepted April 1. Addressreprint requests to E.K.F.
e RSNA, 1996
CT angiography with volume render-ing has a number of theoretical advan-
tages over MIP and shaded surface dis-
play (7-9). Relative voxel attenuation isconveyed through a gray scale in the fi-nal image, which yields images that aremore accurate than those rendered with
shaded surface display. The volume-rendered images maintain the original
anatomic spatial relationships of the CTdata set and have a 3D appearance, fa-cilitating interpretation of vascular in-terrelationships, which is limited with
MIP images. These two qualities of vol-ume-rendered CT angiography are es-sential to imaging abdominal vascula-ture, particularly the splanchnic vessels.Heath et al elucidate many of the
strengths of volume rendering with CT
arterial portography (7). We performedthis study to evaluate the clinical appli-
cation of volume rendering in abdomi-nal vascular imaging, with use of spiralCT data sets.
Materials and Methods
Technique-All CT scans were ac-quired with a Somatom Plus or Plus-SScanner (Siemens Medical Systems,
Iselin, NJ). One hundred to one hun-dred twenty milliliters of nonionic con-
trast material (Omnipaque 350; Nycomed,Princeton, NJ) (350 mg of iodine permilliliter) was infused intravenously at
a rate of 2-3 mL/sec. With settings of210 mAs and 120 kVp, spiral CT wasinitiated 20-25 seconds after the start of
infusion of contrast material for arterial
examinations and after 60 seconds forvenous examinations; scan durationranged from 24 to 32 seconds. Each ex-amination was performed with tableincrementation and collimation rangingfrom 4 to 8 mm and with reconstruction
every 2-4 mm.Once the CT scan was acquired, it
was transferred to a workstation (Sparc-20; Sun Microsystems, Mountain View,
Calif), where the images were viewedas consecutive axial sections and edit-ing could be performed with IPDoc
software (Advanced Medical ImagingLab, Johns Hopkins Hospital, Balti-more, Md). Editing was directed to ex-
dude bone and was performed manu-ally on each axial image. After editing,the CT data set for each case was trans-
ferred to a free-standing workstation(Crimson with Reality Engine; Silicon
Graphics, Mountain View, Calif). Alter-natively, real-time editing was possible
at the Reality Engine workstation.
.*-Window -+i Brightness
width �-
� I Opacity
300 600 f 900 1200 1500 1800
Window Hounsfield Unitslevel
Figure 1. Window-level transfer function.The height of the function dictates voxelopacity or brightness. Window level corre-
sponds to the midpoint of the upslope of thefunction and can be moved higher to selec-tively incorporate high-attenuation voxels
in the data set. Window width correlateswith the length of the horizontal axis over
which the upslope of the transfer function
runs. A larger window width translates tomore slowly rising upslope and increasedimage gray scale. By decreasing the windowwidth, the contrast increases as a result ofthe increased rate of upslope.
Computer-processing algorithms-The
initial step in volume rendering is gen-eration of a voxel-intensity histogram. Atransfer function, in the form of a “win-dow-level” function in these cases, maps
each voxel in the histogram for opacity
and color, as shown in Figure 1 . Interac-tive modification of the transfer functionis performed at the workstation and al-
ters the 3D display. The number ofvoxels incorporated, voxel opacity andbrightness, and gray scale of the 3D im-age can be adjusted. The opacity orbrightness of the voxels can be increased
or decreased by regulating the height ofthe transfer function, which determinesthe relative transparency or brightness,respectively, of the voxels incorporatedinto the image. Practically speaking,modifying opacity alters visualization ofstructures that are positioned posteriorlyto other structures. Increasing the voxeltransparency by decreasing opacity en-ables the viewer to visualize anatomic
structures through other more anteriorlypositioned structures.
As diagrammed in Figure 1 , the trans-
fer function has two other important pa-rameters, which we arbitrarily label
“window width” and “window level,”
similar to window width and windowlevel in a conventional CT image. Theseparameters modify the display by con-trolling the number and attenuation of
voxels incorporated, as well as the grayscale of the 3D image. Window widthcontrols contrast, and window level dic-
tates the number and attenuation ofvoxels integrated into the final image.
a. C.
4/
Volume 200 #{149}Number 2 Radiology #{149}565
5
4
L300
Brightness,- - -
,_, .
,, Opacity
� I
S
.4
L300
-
Brightness
�# - -
‘-I
�#{176}�:600 900 1200 1500 600 900 1200 1500
Hounsfield Units Hounsfield Units
b. d.
Figure 3. In a 48-year-old woman with hepatoma, (a) volume-rendered image of liver shows low-attenuation lesion along the surface of
the midportion of the right lobe, with peripheral enhancement. (b) The correlative window-level transfer function. (c) Volume-rendered
image in anterocoronal projection, with clip plane. Low-attenuation tumor is lateral to the middle hepatic vein (arrow). (d) Window-level
transfer function, with brightness and opacity minimally altered from b; application of clip plane enables visualization of the intrahepatic
tunior and n�iddle hepatic � (Fi�’ .3 co,iti,wes).
Figure 2. Volume-rendered image of the ab-
donien iii the anterosuperior orientation was
obtained with use of clip planes to ren�ove
ribs and bowel. Hepatic artery (straight black
arro�v) originate’s froni the aorta, adjacent to
the celiac artery (white arrow). Renal arteries
(curved arrows) are also depicted.
The ramp of the transfer function shown
in Figure 1 dictates the gray scale in thefinal image. By increasing the window
width, the slope of the ramp decreases,
which increases the gray scale (for cer-
tam values of window level). Alterna-tively, by decreasing the window width,
the upslope of the transfer function in-creases and image contrast increases,which enhances visualization of high-at-
tenuation vessels exclusive of surround-
ing soft-tissue structures.
The capacity to display the vascula-
ture with a gray scale, by increasing thewindow width, distinguishes volumerendering from the binary classification
used with threshold selection in ashaded surface display. Each voxel isclassified according to its constituent
tissue types, and volume-averagedvoxels are accordingly displayed with
a gray scale in the final image. This isin contrad istinction to the threshold ing
algorithm used in shaded surface ren-
derings, in which voxels incorporated
into the 3D image are assumed to be
composed of 100% of a tissue type andshading is computer generated. The
transfer function used in volume ren-
dering classifies all the voxels in the
data set. Those voxels positioned underthe ramp of the function are displayed
with gray scale to reflect volume aver-
aging of different tissue types within
one voxel; the voxels located under thehorizontal portion of the transfer func-
tion are classified as 100’7� of a tissue
type. Adjustment of window width andwindow level is performed interactively
in real time at the workstation to dis-
play vasculature optimally.
Window level dictates the range of
voxel intensities included under theramp portion of the transfer function
and incorporated into the 3D image, by
determining the midpoint of the up-
slope of the transfer function. By in-creasing the window level, the voxelswith lower attenuation are excluded
and only a portion of the data set are
displayed. A higher window level dis-plays only high-attenuation structures
(contrast material-enhanced vessels and
hone). Conversely, a decrease in thewin- dow level yields an image corn-
posed of lower attenuation visceral
structures and higher attenuation vascu-lature or bone. The final image com-prises pixels that are each formed by a
weighted summation of the voxels
along a line that runs through the vol-
ume; the location in the 3D volume and
the attenuation of each voxel in the dataset are parameters in the “weighting”process (9). The pixels in the volume-
Ie. g.
5
4,,, Brightness
/
/
I
3
2
1
S
4
3
2
1
100 300 600 900 1200
Hounsfield Units
300 600 900 1200 1500
HounsfIeId� U�Its
566 #{149}Radiology August 1996
f. h.
Figure 3 (co,it,,i,it’d) (e) Anterior volume-rendered image was obtained with parameters adjusted to depict hepatic veins (arrow [on middle
hepatic veini); the level and window were both decreased. (f) Window-level transfer function reveals decreased window width, which ac-
counts for increased image contrast. (g) Anterior volume-rendered image with clip plane manipulated to depict the hepatic artery (arrow)
coursing alongside the portal vein. Hepaton�a is located superior to the portal vein. (h) Window-level transfer function is similar to b.
rendered image, accord ingly, convey3D information inherent to the originaldata set. The final 3D image can be ro-
tated and viewed in any orientation.
A form of real-time editing can be
performed at the workstation that obvi-ates more time-consuming manual edit-ing. User-prescribed clip planes excise
slabs of data from the data set with use
of a plane that can he positioned in anyorientation or depth. This enables visu-
alization of anatomy in the center of thevolume that would otherwise be oh-scured by peripheral structures. Spe-cifically, vasculature can be visualized
by interactively editing hone. With the
clip planes, a diagnostically useful 3Dimage of the vasculature can be ren-
dered literally minutes after the scanhas been acquired. Figure 2 illustrates
how an unedited CT data set can be
rendered with clip planes to displaythe vasculature, despite the administra-tion of oral contrast material.
Results
Vt’rsntiliti� of real-time rt’,itIt’ri,ic�.-Be-
cause the algorithm incorporates the
entire data set into the rendering, the fi-nal 3D volume-rendered image can bemodified at the workstation to selec-tively visualize vessels, organs, or both
and to increase conspicuity of tumor.Furthermore, the respective vascular
and visceral 3D relationships are main-tamed. The MIP algorithm producesimages deficient in data beyond the
vasculature and most enhancing vis-
cera. A MIP image depicts intraparen-chymal vessels, but it fails to properly
convey the relationships of extraparen-
chymal vasculature to viscera in an ac-
curate 3D representation, as shown inFigure 4b. One clinical application ofthis advantage of volume rendering is
determination of the relationship of he-
patic tumors to liver vasculature for
presurgical planning, as shown by
Woodhouse et al (14) and Heath et al(7). Figure 3 illustrates how manipula-
tion of contrast and opacity in the vol-ume rendering improve visualization
of tumor or intrahepatic vasculature, as
well as the potential to depict the extra-hepatic vasculature, which is important
in determining variant anatomy preop-
eratively.
V(ISC1III1?’ 1 ii tt’,?t’latioii8liips.-Essentialto proper evaluation of vasculature is
determination of �‘asc�jlar interrelation-
ships. Volume rendering properly con-
veys vessel depth and enhances inter-
pretation of vascular relationships,which is important in diagnostic imag-ing and presurgical planning. Further-
more, the final in�age is an accurate de-
piction �)f anatomic spatial relation-
ships and can he rotated in any orien-tation at the workstation, unlike a MIP
image. Figure 4 illustrates how the vol-
ume rendering of the celiac artery and
superior mesenteric artery accurately
conveys vascular interrelationships. Be-cause the MIP algorithm selects only
the highest intensity voxel, the final im-
age fails to depict overlapping vessels.
Acciiractl.-No Valid claims to accu-
racy can he made for volume rendering
without a statistical comparison of vol-
ume rendering to conventional angiog-raphy. It can he asserted and illus-
trated, however, that the capacity to
properly convey vascular and visceral
spatial interrelationships and to depict
vessels with depth results in 3D images
that are anatomically more accurate
a. b.
Volume 200 #{149}Number 2 Radiology #{149}567
Figure 4. Images were obtained in a 39-year-old woman with chronic pancreatitis and pancreatic pseudocyst depicted at spiral CT (notshown). (a) Anterior volume-rendered image shows leftward displacement of the superior mesenteric artery and vein (short white arrow),owing to pseudocyst; window-level transfer function was adjusted to selectively depict enhancing vessels. Hepatic artery (black arrow) andgastroduodenal artery (long white arrow) are also depicted. The multiple, round hyperattenuating structures near the gastroduodenal ar-
tery are calcifications around the pseudocyst. Increasing the gray scale of the display (not shown) helped distinguish vascular enhancement
from calcification. (b) Iniage in the same orientation as a was rendered with MIP algorithm. The 3D structural relationships of vessels and
viscera are not maintained; the kidneys appear anterior to the liver and aorta. The origins of the hepatic artery and the gastroduodenal ar-
tery are Ill.) longer depicted.
than MIP images, as demonstrated inFigure 4.
Volume-rendered images are less
prone to the inaccuracies inherent in
shaded surface display, because voxelsthat represent a volume average of tis-
sue types are displayed with a grayscale dictated by the upslope of the
transfer function; shaded surface ren-
derings do not convey information re-garding the relative attenuations of the
voxels in the original data set. Accord-ingly, shaded surface renderings do notdepict calcification distinct from vascu-
lar enhancement; volume-rendered d is-plays can be interactively optimized by
adjusting the window width and win-dow level to make this important dis-tinction.
Discussion
A number of authors have previously
described how MIP and shaded surface
display images are rendered (1,7,10-13). Surface rendering necessitates se-
lection of threshold values to include
all high-attenuation structures and todepict the vasculature. All voxels above
the threshold are assumed to be com-
posed completely (100%) of enhancingvasculature (or bone), or not at all (0%)
(8). The computer generates a surfacedisplay of the data incorporated. To
create the perception of depth, the corn-puter projects a light source from a spe-
cific orientation and shades the imageaccordingly, so the images have a 3D
appearance, which is an advantageover MIP (10,11). Because only a por-tion of the data set is incorporated intothe final image (those voxels on thegenerated surfaces), the computer pro-
cessing of shaded surface-rendered im-
ages has traditionally been faster thanvolume rendering (8).
To generate images with MIP, the
computer analyzes the CT data set as a
volume, by projecting rays through the
data set. Along each ray, the voxel ofhighest intensity, or attenuation, is se-
lected. Again, this selects for enhancing
vasculature if editing has been per-
formed to remove bone. These high-in-
tensity voxels are displayed as a grayscale, which enables discrimination ofcalcium from vascular enhancement(10,11,13). The images are two dimen-
sional, but a cine loop of multiple MIPscan he incorporated to facilitate deter-niination of vascular interrelationships
(11).The advantages of volume rendering
stem from the algorithm used to gener-
ate the 3D image and the computerhardware presently available for pro-
cessing and display. Real-time render-ing adds a new dimension to CT an-
giography, the capacity to simulta-neously evaluate vasculature and vis-
cera, as shown in Figure 5, a tremen-
dous asset in splanchnic vascular imag-ing. Interaction at the workstationyields the optimal depiction of the area
of interest as subjectively determinedby the viewer. Modification of the pa-rameters directly changes conspicuity
and resolution by dictating the grayscale and contrast. Improvements in
computer processing and speed makethis interactive rendering possible. The
algorithm that generated the volume-
rendered image is responsible for this
advantage, as relative voxel attenuation
and 3D relationships inherent in the CTdata set are retained.
The challenge for CT angiography isto generate accurate depictions of the
vasculature with resolution comparable
to that of conventional angiography. Inmedical imaging, accuracy cannot he
compromised for any other advantage.Regardless of the rendering technique,the accurate direct depiction of low-resolution, small peripheral vessels ne-
cessitates proper acquisition of CT data
by means of spiral technique, with thin
collimation, small reconstruction inter-vals (15), and rapid enhancement after
bolus administration of contrast mate-rial (12,16).
In the analysis of renal artery steno-
sis with MIP and shaded surface dis-play of Galanski et al, the axial images
and multiplanar reformatted imageswere superior to MIP and shaded sur-
face display images for diagnosis (3).
Several authors have made recommen-dations to generate the most accurate
shaded surface display images (17), butit has been shown that the accuracy of
shaded surface renderings depends onthreshold selection and that stenosescan be overestimated if the threshold is
too high (3). Furthermore, becauseshaded surface renderings do not reli-ably help differentiate calcificationfrom vascular enhancement, the degreeof stenosis may be underestimated(3,4). In a study of 31 patients with re-nal artery stenoses, Rubin et al (4)found that the accuracy and sensitivity
of shaded surface display were 55%and 59% , respectively; these values
were lower than those for MIP (80%
and 92% , respectively). Drehin et al (18)previously demonstrated that volumerendering was more accurate thanshaded surface display for depicting
surgically created femur fractures (18).We found that 3D images of the vas-
culature created from CT data sets by
b.a.Figure 5. Images were obtained in a 64-year-old woman with pancre-atic cancer. (a) Anterosuperior volume-rendered image of the celiac axis
shows tumor adherent to the splenic artery (short arrow) and ringed,
contrast-enhanced hepatic metastases. A large left gastroepiploic vein isalso identified (long arrow), owing to splenic vein occlusion by tumor.
(b) Volume-rendered image depicts the celiac axis, with narrowing due
to tumor encasement of the origin of the splenic artery (arrow). (c) Vol-
ume-rendered image depicts a replaced right hepatic artery from the
superior mesenteric artery (arrow).
C.
568 #{149}Radiology August 1996
means of interactive volume rendering
have several advantages over 3D im-ages created by means of MIP orshaded surface display. Future studiesare needed to rigorously compare re-
sults with volume rendering, MIP, and
conventional arteriography. uReferences
1. Rubin GD, Dake MD, Napel 5, et al. Three-dimensional spiral CT angiography of theabdomen: initial clinical experience. Radiol-
ogy 1993; 186:147-152.
2. Napel 5, Marks MD, Rubin GD. CT an-giography with spiral CT and maximumintensity projection. Radiology 1992; 185:
607-610.
3. Galanski M, Prokop M, Chavan A. Renalarterial stenoses: spiral CT angiography.Radiology 1993; 189:185-192.
4. Rubin GD, Dake MD, Napel 5, et aI. He-
lical CT of renal artery stenosis: conipari-son of three-dimensional rendering tech-
niques. Radiology 1994; 190:181-189.5. Kuszyk BS, Heath DC, Ney DR, et al. CT
angiography with volume rendering: imag-ing findings. AIR 1995; 165:445-448.
6. Fishman EK, Ney DR. infoRAD: computersfor clinical practice and education in radiol-
ogy. RadioGraphics 1993; 13:463-475.7. Heath DG, Soyer PA, Kuszyk BS, et al.
Three-dimensional spiral CT during arte-rial portography: comparison of 3D render-ing techniques. RadioGraphics 1995;
15:1001-1011.8. Fishman EK, Magid D, Ney DR. et al.
Three-dimensional imaging: state of the art.Radiology 1991; 181:321-337.
9. Ney DR, Fishman EK, Magid D, Drebin
PA. Volumetric rendering of computed to-mography data: principles and techniques.IEEE Comput Graph Appl 1990; 10:24-32.
10. Brink J. Technical aspects of helical (spi-ral) CT. Radiol Clin North Am 1995; 33:825-841.
I 1 . Rubin GD, Dake MD, Semba CP. Currentstatus of three-dimensional spiral CT scan-ning for imaging the vasculature. Radiol
Clin North Am 1995; 33:51-70.12. Rubin GD. Three-dimensional CT angiog-
raphy. RadioGraphics 1994; 14:905-912.13. Rubin GD, Silverman S. Helical (spiral)
CT of retroperitoneum. Radiol Clin NorthAm 1995; 33:903-932.
14. Woodhouse CE, Ney DR. Sitzmann JV,
Fishman EK. Spiral computed tomogra-phy arterial portography with three-dimen-sional volumetric rendering for oncologicsurgery planning. Invest Radiol 1994; 29:1031-1 037.
15. Ney D, Fishman EK, Magid D, RobertsonDD, Kawashima A. Three-dimensionalvolumetric display of CT data: effect of
scan parameters upon image quality. JComput Assist Tomogr 1991; 15:875-885.
16. Zeman RK, Silverman PM, Berman PM, etal. Abdominal aortic aneurysms: evalua-tion with variable collimation helical CTand overlapping reconstruction. Radiology1994; 193:555-560.
17. Halpern EJ, Wechsler RJ, DiCampli D.Threshold selection for CT angiography
shaded surface display of the renal arteries.J Digit Imaging 1995; 8:142-147.
18. Drebin RA, Magid D, Robertson DD, Fish-man EK. Fidelity of three-dimensional CTimaging for detecting fracture gaps.
Comput Assist Tomogr 1989; 13:487-489.