2
Training Institute Education Centers Texas A&M Engineering Extension Service Course # Course Title Hours OSH511 Occupational Safety & Health Standards for General Industry (OSHA 511) 31.00 OSH521 OSHA Guide to Industrial Hygiene (OSHA 521) 31.00 OSH222 Respiratory Protection (OSHA 2225) 31.00 OSH755 Introduction to Accident [Incident] Investigation (OSHA 7505) 15.00 OSH720 Bloodborne Pathogen Exposure Control for Healthcare Facilities (OSHA 7200) 8.00 OSH725 Health Hazard Awareness (OSHA 7205) 8.00 OSH715 Introduction to Evacuation and Emergency Planning (OSHA 7105) 4.25 OSH201 Hazardous Materials (OSHA 2015) 31.00 OSH226 Permit-Required Confined Space Entry (OSHA 2264) 31.00 OSH204 Machinery and Machine Guarding Standards (OSHA 2045) 31.00 OSH225 Principles of Ergonomics (OSHA 2255) 23.00 OSH784 Recordkeeping Rule Seminar (OSHA 7845) 4.25 PRT256 MEDIC First Aid and CPR Instructor (or equivalent) 16.00 Total Course Hours: 264.50* *Up to 50% of total required course hours can be satisfied by completing the required courses at any OSHA Training Institute Education Center or at the OSHA Training Institute in Arlington Heights, Illinois. Proof of successful course completion required. Course # Course Title Hours OSH510 Occupational Safety & Health Standards for the Construction Industry (OSHA 510) 31.00 OSH521 OSHA Guide to Industrial Hygiene (OSHA 521) 31.00 OSH222 Respiratory Protection (OSHA 2225) 31.00 OSH755 Introduction to Accident [Incident] Investigation (OSHA 7505) 15.00 OSH720 Bloodborne Pathogen Exposure Control for Healthcare Facilities (OSHA 7200) 8.00 OSH725 Health Hazard Awareness (OSHA 7205) 8.00 OSH715 Introduction to Evacuation and Emergency Planning (OSHA 7105) 4.25 OSH309 Electrical Standards (OSHA 3095) 31.00 OSH301 Excavation, Trenching, and Soil Mechanics (OSHA 3015) 23.00 OSH311 Fall Protection (OSHA 3115) 23.00 OSH750 Introduction to Safety and Health Management (OSHA 7500) 8.00 OSH730 Understanding OSHA’s Permit-Required Confined Space Standard (OSHA 7300) 8.00 PRT256 MEDIC First Aid and CPR Instructor (or equivalent) 16.00 Total Course Hours: 237.25* *Up to 50% of total required course hours can be satisfied by completing the required courses at any OSHA Training Institute Education Center or at the OSHA Training Institute in Arlington Heights, Illinois. Proof of successful course completion required. Become an industry recognized TEEX Certified Safety & Health Official ® (CSHO) in one of two tracks: • Construction Industry (for construction environments) • General Industry (at industrial facilities) The TEEX CSHO is valuable whether you perform safety and health work on a daily basis or have safety responsibilities over others, including inspections and audits. In addition to its many other benefits, your CSHO certificate qualifies you for college credit with the following institutions of higher learning: • San Juan College • Texas A&M University - Commerce • Tarleton State University • Northwestern State University See more at: teexsafety.org/csho Once you complete your CSHO track, you can further your studies through continuation of training in an endorsement. Certified Safety & Health Official ® (CSHO) Facebook.com/Teexitsi Twitter.com/Teexsafety Infrastructure Training & Safety Institute TEEX OSHA Training Institute Education Center P.O. Box 40006 College Station, TX 77842-4006 teexsafety.org/csho 800-SAFE-811 (800.723.3811) Certified Safety & Health Official ® Endorsements Construction and General Industry Tracks Electric Power Oil & Gas Wind Energy Environmental Transportation Aviation Industrial Emergency Response CONSTRUCTION INDUSTRY CSHO TRACK GENERAL INDUSTRY CSHO TRACK ABOUT THE CSHO DESIGNATION

CSHO Tracks and Endorsements Brochure - TEEX Tracks and Endorsements.… · Course # Course Title Hours EPP013 Electrical Worker - Safe Work Practices 16.00 OSH301 Excavation, Trenching,

Embed Size (px)

Citation preview

Page 1: CSHO Tracks and Endorsements Brochure - TEEX Tracks and Endorsements.… · Course # Course Title Hours EPP013 Electrical Worker - Safe Work Practices 16.00 OSH301 Excavation, Trenching,

Training Institute Education Centers

Texas A&M Engineer ing Extens ion Serv ice

Course # Course Title HoursOSH511 Occupational Safety & Health

Standards for General Industry (OSHA 511)

31.00

OSH521 OSHA Guide to Industrial Hygiene (OSHA 521)

31.00

OSH222 Respiratory Protection (OSHA 2225) 31.00

OSH755 Introduction to Accident [Incident] Investigation (OSHA 7505)

15.00

OSH720 Bloodborne Pathogen Exposure Control for Healthcare Facilities (OSHA 7200)

8.00

OSH725 Health Hazard Awareness (OSHA 7205) 8.00

OSH715 Introduction to Evacuation and Emergency Planning (OSHA 7105)

4.25

OSH201 Hazardous Materials (OSHA 2015) 31.00

OSH226 Permit-Required Confined Space Entry (OSHA 2264)

31.00

OSH204 Machinery and Machine Guarding Standards (OSHA 2045)

31.00

OSH225 Principles of Ergonomics (OSHA 2255) 23.00

OSH784 Recordkeeping Rule Seminar (OSHA 7845)

4.25

PRT256 MEDIC First Aid and CPR Instructor (or equivalent)

16.00

Total Course Hours: 264.50*

*Up to 50% of total required course hours can be satisfied by completing the required courses at any OSHA Training Institute Education Center or at the OSHA Training Institute in Arlington Heights, Illinois. Proof of successful course completion required.

Course # Course Title HoursOSH510 Occupational Safety & Health Standards

for the Construction Industry (OSHA 510)

31.00

OSH521 OSHA Guide to Industrial Hygiene (OSHA 521)

31.00

OSH222 Respiratory Protection (OSHA 2225) 31.00

OSH755 Introduction to Accident [Incident] Investigation (OSHA 7505)

15.00

OSH720 Bloodborne Pathogen Exposure Control for Healthcare Facilities (OSHA 7200)

8.00

OSH725 Health Hazard Awareness (OSHA 7205) 8.00

OSH715 Introduction to Evacuation and Emergency Planning (OSHA 7105)

4.25

OSH309 Electrical Standards (OSHA 3095) 31.00

OSH301 Excavation, Trenching, andSoil Mechanics (OSHA 3015)

23.00

OSH311 Fall Protection (OSHA 3115) 23.00

OSH750 Introduction to Safety and Health Management (OSHA 7500)

8.00

OSH730 Understanding OSHA’s Permit-Required Confined Space Standard (OSHA 7300)

8.00

PRT256 MEDIC First Aid and CPR Instructor (or equivalent)

16.00

Total Course Hours: 237.25*

*Up to 50% of total required course hours can be satisfied by completing the required courses at any OSHA Training Institute Education Center or at the OSHA Training Institute in Arlington Heights, Illinois. Proof of successful course completion required.

Become an industry recognized TEEX Certified Safety & Health Official® (CSHO) in one of two tracks:

• Construction Industry (for construction environments)• General Industry (at industrial facilities)

The TEEX CSHO is valuable whether you perform safety and health work on a daily basis or have safety responsibilities over others, including inspections and audits.

In addition to its many other benefits, your CSHO certificate qualifies you for college credit with the following institutions of higher learning:

• San Juan College• Texas A&M University - Commerce• Tarleton State University • Northwestern State University

See more at: teexsafety.org/csho

Once you complete your CSHO track, you can further your studies through continuation of training in an endorsement.

Certified Safety & Health Official®

(CSHO)

Facebook.com/Teexitsi Twitter.com/Teexsafety

Infrastructure Training & Safety InstituteTEEX OSHA Training Institute Education Center

P.O. Box 40006College Station, TX 77842-4006

teexsafety.org/csho800-SAFE-811 (800.723.3811)

Certified Safety &Health Official®

Endorsements

Construction and GeneralIndustry Tracks

Electric Power

Oil & Gas

Wind Energy

Environmental

Transportation

Aviation

Industrial Emergency Response

ConstruCtion industry CsHo traCkGeneral industry CsHo traCk about tHe CsHo desiGnation

Page 2: CSHO Tracks and Endorsements Brochure - TEEX Tracks and Endorsements.… · Course # Course Title Hours EPP013 Electrical Worker - Safe Work Practices 16.00 OSH301 Excavation, Trenching,

For more information, go to: teexsafety.org/csho

C S H O E N D O R S E M E N T S

C17.9241.12

* These do not need to be repeated if you already received your Construction Industry CSHO.** These do not need to be repeated if you already received your General Industry CSHO.

nce you complete your construction or general industry CSHO track, you can further your studies through continuation of training in these endorsements.

O Wind EnErgy

Course # Course Title Hours

EPP013 Electrical Worker - Safe Work Practices 16.00

OSH301 Excavation, Trenching, and Soil Mechanics ** (OSHA 3015)

23.00

OSH309 Electrical Standards ** (OSHA 3095) 31.00

OSH311 Fall Protection ** (OSHA 3115) 23.00

OSH226 Permit-Required Confined Space Entry * (OSHA 2264)

31.00

OSH784 Recordkeeping Rule Seminar * (OSHA 7845)

4.25

OSH711 Lockout/Tagout (OSHA 7115) 7.00

Total Course Hours: 135.25

A Letter of Certification for Tower Climbing & Verification of Emergency Rescue experience (from either an employer or authorized training institution) is required and must be sent to TEEX to complete the TEEX Wind Generation CSHO. The letter will be reviewed and approved by the TEEX Safety and Health and Utilities Training Program Director.

Wind Energy

Electric Power TransportationTranOil &GasOOOOOOOOil GGGGGGGGas

Aviation

TM

Environmental AAvAvvA iatioIndustrial EmergencyResponse

ElEctric PoWEr

Course # Course Title Hours

OSH201 Hazardous Materials * (OSHA 2015) 31.00

OSH226 Permit-Required Confined Space Entry * (OSHA 2264)

31.00

OSH309 Electrical Standards ** (OSHA 3095) 31.00

OSH311 Fall Protection ** (OSHA 3115) 23.00

OSH711 Lockout/Tagout (OSHA 7115) 7.00

OSH784 Recordkeeping Rule Seminar * (OSHA 7845) 4.25

EPP013 Electrical Worker - Safe Work Practices 16.00

EPP036 Electrical Codes 16.00

Total Course Hours: 159.25

EnvironmEntal

Course # Course Title Hours

ENV213 Introduction to Environmental Health & Safety 32.00

ENV235 Chemistry for Environmental Professionals 24.00

ENV214 Stormwater Management: Permitting & Regulatory Overview

16.00

ENV208 Hazardous Waste Management 24.00

ENV212 Hazardous Material Employee Training 16.00

ENV210 Clean Air Compliance 16.00

Total Course Hours: 128.00

aviation

Course # Course Title Hours

TSI00003 Advanced Aircraft Accident Investigation 21.00

TSI00035 Basic Aircraft Accident Investigation 56.00

TSI00379 Aircraft Cabin Safety Investigation 21.00

TSI008 Human Factors in Aircraft Accident Investigation

21.00

TSI001038 Safety Management Systems/Aviation 56.00

Total Course Hours: 175.00

ALL of these courses are through the Transportation Safety Institute (TSI) Training Center in Oklahoma City, OK.

industrial EmErgEncy rEsPonsE

Course # Course Title Hours

HAZ020 NFPA 472 Hazardous Materials Technician Training

36.00

IND016 NFPA 1081 Industrial Exterior Fire Brigade Training 40.00

IND017 NFPA 1081 Industrial Interior Firefighting Training 40.00

IND103 NFPA 1081 Leadership Training 20.00

RES002 NFPA 1006 2008 Edition Confined Space Rescue Levels I & II Training

36.00

RES004 NFPA 1006 2008 Rope Rescue Level I Training 36.00

Total Course Hours: 208.00

transPortation (HigHWay & HEavy construction)

Course # Course Title Hours

OSH784 Recordkeeping Rule Seminar (OSHA 7845) 4.25

HWS002 Work Zone Traffic Control - Open Enrollment 16.00

HWS110 Flaggers in Work Zones 4.00

HAZ032 Air Monitoring for Hazardous Materials/Operations Mission Specific Training

16.00

WWW212 Applied Confined Space Safety 8.00

HEP214 Equipment Load & Tie Down 8.00

OSH205 Cranes In Construction 32.00

ENV208 Hazardous Waste Management (RCRA) 24.00

ENV212 Hazardous Materials And Waste Shipping (DOT)

16.00

Total Course Hours: 128.25

oil & gas

Course # Course Title Hours

PRT106

SAF108

Hydrogen Sulfide (H2S) Instructor Development Course *** ORPEC H2S Clear (4-Hour End User) Trainer Development Course ***

23.00

16.00

PRT145 Environmental Regulation for Oil and Gas Exploration and Production

31.00

PRT300 Introduction to Oil & Gas 24.00

PRT301 Process Safety Management Survival 23.00

Total Course Hours:(Varies depending on whether

PRT106 or SAF108 is completed.)

101.00or

94.00

*** Either PRT106 or SAF 108 will satisfy the requirement to have been trained as an H2S Trainer. The PEC H2S Clear Trainer Development Course requirement can be met regardless of whether the course was completed with TEEX or another provider. Participants need to provide proof if the training was done by a provider other than TEEX Safety & Health Training.