csadsad vvskskQQ bbUUffMM;;kk - bankofindia.co.in · 01 Rigid P.V.C. Pipe 25mm dia., 1.5mm thick, Godavari ... 06 Telephone & Computer Wire D-Link ... 5MM size with top and bottom

cccss s aa addd vvvss skkkQQQ bbbUUUfffMMM;;;kkk

Tender of

Civil,Furniture,Electric & A.C. Work for

Atkot Branch, At. Atkot,Dist.Rajkot.

Consultant Owner Ar. KAMLESH PAREKH B.Arch., A.I.I.A., M.C.A., F.I.V. ARCHITECT | INTERIOR DESIGNER | GOVT. VALUER

25, New Jagnath Plot, Opp. Jagnath Marble, RAJKOT – 360 001. INDIA E-mail: [email protected] Ph.: +91 281 2463655/3291900

Bank of India Atkot Branch, Atkot, Dist.Rajkot.

LIST OF APPROVED MATERIALS FOR FURNITURE WORK

SR.NO. MATERIALS APPROVED MANUFACTURES / SUPPLIERS

01 Paint I.C.I. Dulux / Asian Paints / Berger.

02 Wood preservative Bison by British Paints / Termiseal by PCI.

03 Ply Wood Sarda Ply /Duro Ply (MR Grade) / Green Ply Amul (MR Grade)

04 False ceiling Armstrong, Indian Gypsum Board

05 Laminates Marrino / green lam / Uro / equivalent

06 Screws G.K.W. / Nettle Fold.

07 Adhesives Fevicol – SH

08 Locks Godrej

09 Night Latch Godrej

10 Aluminium Door Frame Jindal

11 Glass Modi / Asahi / Saint Gobain

12 Keyboard Drawer, Telescopic CPU Stand, Cable Organiser (Wire Manager)

EBCO

13 Chair Methodax/ equivalent Note : [A] Before starting of work contractor must get all samples / make approved from

architect before using at site. [B] Consultants reserve the right to add or delete name of any manufacture as and when

required. [C] Consultants reserve rights to select any of the specified brands mentioned above. [D] In description of all items, wherever waterproof plywood is mentioned, now it is

modified and read as IS: 303 MR Grade. [E] In the case of discrepancy between descriptions of Bill of Quantities and/or the

drawings, “Drawings” of preference shall be observed. All and above Bank/Bank’s Architect decision shall be final.

Sign ________________ [CONTRACTOR]

LIST OF APPROVED MATERIALS FOR ELECTRIC WORK

SR.NO

. MATERIALS APPROVED MANUFACTURES / SUPPLIERS

01 Rigid P.V.C. Pipe 25mm dia., 1.5mm thick, Godavari 19mm dia., 1.5mm thick, Godavari

02 Copper Conductor PVC Coated Wire [Flexible]

A.R.K. Lite, Avocab, KEI.

03 Switches Legrand / Crabtree.

04 MCB’S, MCCB, ELCB. Havels / MDS /Hager.

06 Telephone & Computer Wire D-Link / Finolex.

07 Wire Poly cab / R.R.Cable/ Finolex / Havels

08 Fixtures & Fan Crompton / Bajaj / Philips/ Wipro/ Hevels/

09 Exhaust Fan Rexnord

10 Light Fixture As per the Architect Selection With G.E., Ballast and tube of Philips.

11 Lamination Sheet Italian Marble Finish as per the Architect Selection

Note : [A] Before starting of work contractor must get all samples / make approved from


required. [C] Consultants reserve rights to select any of the specified brands mentioned above. [D] In the case of discrepancy between descriptions of Bill of Quantities and/or the



LIST OF APPROVED MATERIALS FOR AIR -CONDITIONING WORK

SR.NO

. MATERIALS APPROVED MANUFACTURES / SUPPLIERS

01 A.C.Units Voltas/Blue star/Carrier/Hitachi

02 G.I.Sheets Jindal/Sail/Ispat/National

03 Expanded Polystyrene Beardsell / Cooline.

04 Fiber glass Up Twiga /Kimmco lloyd

06 Grilles Panchal / Mahakali/Approved make.

07 Air Curtain Acme / Sap/ Adc

08 Cables CCI / Glostr / Finolex/ Polycab/ R.R.

09 Electrical Components Siemens/L&T/EE

10 Wires Finolex/R.R.

11 G.I.Pipe Prince/Supreme/Finolex/Astral

12 Nitrile Rubber Armaflex/Aeroflex Note : [A] Before starting of work contractor must get all samples / make approved from


required. [C] Consultants reserve rights to select any of the specified brands mentioned above. [D] In the case of discrepancy between descriptions of Bill of Quantities and/or the



In figuere In Word

1 2 3 4 5 6 7

1

3.50 R.ft.

Providing and fixing 21"deep Pantry Platform with black granite

top S.S.Sink, Pilorcock, kota shelves, vitirified base 3" ht. with pani

patti of half round edge etc. complete as per drg. & as suggested

by an Architect (Basic rate of granite Rs.180.00 Per Sq.ft.)

2

1.00 No.

Lowering, laying and fixing in position to correct line and level

P.V.C.Storage Tank of approved make including all taxestransportation ,octroi or necessary fittings including constructing ofbrick masonary platform of size 2 mt x 2 mt. x 0.30 mt. and finishedwith plastering making connection etc. complete as directed.Capacity-500 Ltr.

3

475.00 Sq.ft.

Painting two coats on steel and other metal surface with Enamel

Paint, brushing, interior to give an even shade including cleaning

the surface an even shade including cleaning the surface of all dirt,

dust and other foreign matter including removed existing paint.

Unit

Total Amount according to

estimated quantities

Rate

PART- I CIVIL WORK

BILL OF QUANTITIESName of work : Tender of Civil, Furniture,Electric & A.C. work for Bank of India, Atkot Branch,Atkot,Dist. Rajkot.

Item No.

Quantities estimated but may be more

or less

Item of wok

AR.KAMLESH PAREKH BOI-ATKOT

In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

4

42.00 Sq.ft.

Providing and fixing in position Collapsible steel shutters with

vertical channels 20x10x2MM braced with flat iron diagonals 20 x

5MM size with top and bottom rails of T-iron 40 x 40 x 6MM with

38MM dia steel pulleys, complete with bolts nuts, locking

arrangements, stoppers,handles including applying a priming coat

of Red lead paint.

5

2750.00 Sq.ft.

Wall painting (Two coats) with Plastic emulsion paint of approved

brand and manufactrue on wall & ceiling surface to give an even

shade over and including a primery coat of acrelic base primer

and putty of approved brand including thoroughly brushing the

surface free from mortar droppings and other foreign matter and

also including preparing the surface even and smooth.

1 PLAIN GYPSUM FALSE CEILING ( WITH COLOUR) AS PERDESIGNP & F suspended false ceiling as per design & shape suggested by

using standard company sections [ GYP-STEEL R], which includes

P&F G.I.Perimeter Chsnnels of size 0.55mm th. Having one flange

of 20mm & another flange of with nylon aleeves & screws at

610mm c/c.Then suspending G.I.Intermediate channels of size

45mm,0.9mm th.with two flangs of 15 mm each

PART- II - FURNITURE WORK

Total of Part-I Rs.


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

from the soffits at 1220 mm c/c with ceiling angle of width 25mmx10 mmx 0.55mmth. Fixed to soffits with G.I.cleats & steelexpansion fasteners. Ceiling sectionsof 0.55mm thickness havingknurled web of 51.5mm & two flangs of 26mm. Each with lips of10.5mm area then fixed to the main intermediate channel with thehelp of connecting clips & in direction perpendicular to theintermediate channel at 457 mm c/c. 12.5 mm th. tapered edgeGypsum Board (Confirming to I.S.-2095-1982) is then screw fixedto ceiling section with 25mm drywall screws at 230 mm c/c. Screwsfixing is done mechanically either with screwdriver or drillingmachine with suitable attachment. Standard companymanufactured sections [ GYPSTEEL R ] should be used for theentire framework. Finally the board are to be joined & finished soas to have a finish look which includes filling & finishing the tapered& squarev edges of the boards with joining compound, paper tape& two coats of primer suitable for Gypsum Board ( As perrecommended practices of India Gypsum or equivalent].GENERAL NOTES FOR THE ABOVE ITEM RATE INCLUDES:The job includes applying two or more coats of acrylic emulsionpaint in the standard procedure of painting job. The cut-outs forvariety of light fixtures, A.C. continuos grills & diffusers, musicspeakers & other equipment's etc. & the same have to be madewith the frame of perimeter channels of size:20 mm X 27 mm X 30mm X 0.55mm thick, supported suitably.


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

No extra will be paid for this. The visible area will be considered

for the measurement purpose. overlapping & visible vertical drops

of the bordswill not be cosider for measurement purpose. The trap

door made out of 19 mm plywood with proper teak wood frame

fixed to the structural ceiling & all required hardware such as

hinges, locks,stoppers ,handles etc comp.in paint finishes

surrounding ceiling finish

425.00 Sq.ft.

[2NOS] Angle bead has to beused to at steps to get straight line.

Edges bead has to be used to protect the exposed Gypsum core

I.E. cut edges of cpening for light fixtures, A.C. grills, diffusers,

speakers etc. "V" grooves should becut at every square edge

joints/filled with joining compound & paper tape.

2 FALSE CEILING(ARMSTRONG)Providing and fixing in position false ceiling in armstrong 600 x 600

x 15/16 mm Dune Supreme RH 99 Prima tile with Tegular edge

framework with microlok as specified by Armstrong Co. with

suspenders wherever required. Making necessary framework for

A.C. ducting, if any and necessary cutouts for diffusers and light

fittings, taping and finishing to proper line & level, including making

grooves and trap doors for A.C. unit in 18 mm thick M.R. Grade

Plywood with Stainless steel hinges & locks


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

360.00 Sq.ft.

with moulding 1" x 1" for edges including finishing with white Plastic

Emulsion Paint etc. complete in all respects. (Note: Only the plan

area will be measured for payment. No extra payment will be

,made for cutouts, grooves, mouldings etc,).

3 Entrance Door

42.00 Sq.ft.

Provisding & fixing Entrance door (glazed) as per drawing in silver

anodised aluminium door section (Jindal Make) in top & bottom,

glzed with 12mm thick glass of approved make with etching and

frosting.Item to include floorsprings, lock, all necessary hardwares

of stainless steel finish as approved by Architect, complete in all

respect (Two shutter on two floor spring and two fix glass.

4 Facade of Entrance Door

287.00 Sq.ft.

Provioding and fixing in position Aluminium composite panelBoxing with PVDF coating & LDPE core laminated Eurobond /Altcbond /Alkubond Exterior Grade 4 mm thick with composite of(0.5mm -3mm-0.5mm ) including fabrication for the same with

aluminium sections, required hardware, silicon sealent (Dow

Corning 789) masking tape, necessary scaffolding etc. as detailed

in drawing complete in all respects.


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

5 Elctrical panel Cabinate

1.00 No.

P & F 16" deep Electrical Panel Cabinet made out of 19mm th.Commercial plywood with 19mm back support It will have full hight1mm thick laminate[all four sides] shutter of approved shade &make on inside surface. The shutters will be provided with ready touse wooden jali with mesh for ventilation. The shutter will have5.5mm th. glass window at meter level for reading. The cabinet willall necessary hardware as required & instructed. Entire insidecabinet should be in 2-3 coats of oil/luster enamel paint finish & allthe wooden members shall be in melamine polish as per theinstruction and design of architect including all labour andmaterials. (4'3"x3'3"x15"d)

6

1.00 Nos.

Providing & Fixing Slipdesk to be made out of 18mm & 12mm thk.Com. Ply, finished with approved laminate on external side, internal side oilpaint finished, including, 12mm thk. Clear glass top ,shutters bellow, locking system, all necessary hardware fittingscomplete as per drg. & as suggested by an Architect 7'0"X4'6"htx25"d)

7 P & F Sofa for visitors with internal frame of M.S.Tube with metalsupporting legs/ C.P,Teak wood or Plywood internal frame from3"x1.5" thickness with wooden supporting legs, with jalebi springsfitted to internal frame. The seat should have 75mm thick highdensity U-foam [43kg/m3] &


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

6.00 Rft.

back should have 50mm thick high density U-foam which will be

covered with fabric of [Rs.200.00 Per Mts] of approvrd make,

shade, color & quality as per the instructions of the Architects. The

Sofa will have Melamine Polish of approved shade by the Architect.

(Measuremen will be taken from the centerof the sofa)

FRONT OFFICE COUNTERProviding and fixing in position Front Office Counter 2'-6" wide as

peer drawing comprising of the following complete in all respcts:i) Working top made with 25mm thick plywood finished with 1mmthick laminate. Outside edge of the working top shall be providedwith 1¼" x 1" Teak Wood mouldin finished with melamine polish.Inside edge will be provided with ½" x 1" T.W. beading patti withmelamine finish.ii) Vertical facia (Apron) made with 18mm thick plywood finishedwith 1mm thick laminate with 1mm thick groove at the joint oflaminates of two different shades.iii) Vertical drop (horizontal band) shall be provided on the faciabelow the working top made with 18 mm thick plywood finishedwith 1mm thick laminates with provision for concealed light, 1mmthick groove shall be provided at the joint of two different shades oflaminate.iv) Glazed partition above working top to be provided with 12mmthick clear glass cut to the standard shape fixed to partition as perfixing details and to boxing with concealed S.S. finished 'D'brackets as shown in the drawing. The exposed edge of the glassshall be finished in mirror polish.

8


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

v) 3'-10" high boxing (10" x10") made with 18mm thick plywoodfinished with 1mm thick laminate incuding providing & fixing 6mmthick square frosted glass at a height 3'-2" above finished floorlevel.vi) 1'-9" high Boxing (5"x5")made with 12mm thick plywood finishedwith 1mm thick laminate.vii) vertical supports made with 18mm thick plywood finished withwhite enamel paint.viii) Telescopic CPU Stand/ ready made Keyboard tray shall beprovided of aproved model and make.ix) Footrest made with T.W. member of size 4" x 1½" finished withfrench polish.x) Drawer unit as per drawing shall be provided with multipurposedGodrej lock in Each drawer. Facia of drawer unit shell be finishedwith 1mm thick laminate and all other sides shall be finished withwhite enamel paint. The drawer will be provided with handles(Stainless Steel finish) and channels as per approval of the ProjectConsultant Bank.xi) Boxing as per drawing made with 12 mm thick plywood finished

with Synthetic enamel paint shall be provided below the table top

for for electrical conduiting and at the bottom for the LAN cabling /

Telephone wire conduiting.

20.00 Rft.

The item to include all necessary hardware and fitting in Stainless

Steel finish, lipping to all edges and making provision only for

electrical fitting behind the front. Vertical drop and also in the 10" x

10" boxing as shown in the drawing. Necessary beading with

melamine polish for fixing the glass are to be provided.


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

9 WOODEN PANELLING

100.00 Sq.ft.

P & F Wall Paneling should be made by providing T.W.Frame work(size 1"x3/4") or commercial plywood framing at suggested interval[ not more than 2'.0"c/c on both direction] covered with 6mm-9mm-12mm th. commercial plywood fixed on entire framework & putting1mm th. Laminate upto false ceiling height as per design.. Thepaneling should have suggested grooves & Ghana teak molding(1.5":x1") to shape at 3'.0" level as suggested in melamine Polishfinish.as per the instruction and design of architect including alllabour and materials.

Partly Glazed partition for Cash CabinsProviding and fixing in position 7'-7" high partly glazed partition forCash Cabins as per drawing including door in frame work at 2' x 2'grid (horizontallly and vertically) comprising of 2" x 1½" T.W. sectioand /or as per frame work shown in the drawings with 6mmplywood on both sides finished with 1mm thick laminates ofapproved shade and color asshown in drawings. Item to include8mm thick glass with etching and frosting as per design and 2" x 2"T.W. member for door sides and glass sides and T.W. door frameto take 8mm thick glass with etching and frosting. The door will beprovided with T.W. louvers finished in melamine polish of matchinglaminates color.The doors are also to be porvided with GodrejNight Latch .Two wooden treys are also to be provided as perdrawing.

10


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

125.00 Sq.ft.

Necessary cutouts are to provided in the glass and the edges ofthe glass cutouts are to be finished in mirror polish. All exposedT.W. surfaces to be finished in melamine polish of matchinglaminate color as directed including all necessary Stainless Steelfinish fitting/ hardware,door closer,Godrej locks and woodpreservative paint etc. as per list of approved material and asapproved by the project consultnant /bank, complete in allrespects.

11 Partly Glazed Full Height Partition Providing and fixing in position 7'-7" high partly glazed partition forCash Cabins as per drawing including door drawing in frame workat 2' x 2' grid (horizontallly and vertically) comprising of 2" x 1½"T.W. sectio and /or as per frame work shown in the drawings with6mm plywood on both sides finished with 1mm thick laminates ofapproved shade and color asshown in drawings. Item to include8mm thick glass with etching and frosting as per design and 2" x 2"T.W. member for door sides and glass sides and T.W. door frameto take 8mm thick glass with etching and frosting.The door will beprovided with T.W. louvers finished in melamine polish of matchinglaminates color.The doors are also to be porvided with GodrejNight Latch. Two wooden treys are also to be provided as per drawing.

Necessary cutouts are to provided in the glass and the edges of

the glass cutouts are to be finished in mirror polish.


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

175.00 Sq.ft.

All exposed T.W. surfaces to be finished in melamine polish ofmatching laminate color as directed including all necessaryStainless Steel finish fitting/ hardware, door closer, Godrej locksand wood preservative paint etc. as per list of approved materialand as approved by the project consultnant /bank,complete in allrespects.

CASH COUNTERProviding and fixing in position Cash Counter 2'-9" wide as perdrawing No. comprising of the following:

i) Working top made with 25mm thick plywood finished with 1mmthick laminate. Outside edge of the working top shall be providedwith 1¼" x 1" Teak Wood mouldin finished with melamine polish.Inside edge will be provided with ½" x 1" T.W. beading patti withmelamine finish.

ii) Vertical facia (Apron) made with 18mm thick plywood finishedwith 1mm thick laminate with 1mm thick groove at the joint oflaminates of two different shades.

iii) Vertical drop (horizontal band) shall be provided on the faciabelow the working top made with 18 mm thick plywood finishedwith 1mm thick laminates with provision for concealed light, 1mmthick groove shall be provided at the joint of two different shades oflaminate.

iv) Glazed partition of 1'-4" height above working top to be providedwith 12mm thick toughened frosted glass besides non-tranceparentfilm from inside fixed to partition as per fixing details and to boxingwith concealed S.S. finished 'D' brackets as shown in the drawing.The exposed edge of the glass shall be finished in mirror polish.

12


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

v) Transaction top shall be provided with 12mm thick toughenedglass (partly glazed partly frosted) fixed horizontally with concealedStainless Steel D bracket. Both exposed edges (inside andoutside) shall be moulded and finished in mirror polish.

vi) Glazed partition having height 1'-0" above the transaction top (infacia) shall be provided with 12mm thick glass (clear) with cut outof 8" x 4" as per drawing. The edge of cut out and the top edge ofglass are to be mirror polished and to be fixed in partition as perfixing details and to boxing with concealed S.S. finished 'D'brackets as shown in the drawing. The exposed edge of the glassshall be finished in mirror polish.

vii) 7'-7" high Boxing (10'' x 10") made with 18mm thick plywood asper drawing 1'-6" horizontal extension at the top including providingand fixing 6mm thick squere frosted glass at a height of 5'-11"above finished Floor level.

ix) 1'-9" high boxing (5" x 5") made with 12mm thick plywoodfinished with 1mm thick laminate are to be provided.x) Telescopic CPU Stand/ ready made Keyboard tray shall beprovided of aproved model and make.ix) Footrest made with T.W. member of size 4" x 1½" finished withfrench polish.

x) Drawer unit as per drawing shall be provided and each drawershould have vertical partitions for keeping currency notes withmultipurposed Godrej lock in Each drawer. Facia of drawer unitshell be finished with 1mm thick laminate and all other sides shallbe finished with white enamel paint. The drawer will be providedwith handles (Stainless Steel finish) and channels as per approvalof the Architect.


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

xi) Boxing as per drawing made with 12 mm thick plywood finishedwith Synthetic enamel paint shall be providedbelow the table top for for electrical conduiting and at the bottomfor the LAN cabling / Telephone wire conduiting.

9.00 Rft.

The item to include all necessary hardware and fitting in StainlessSteel finish, lipping to all edges and making provision only forelectrical fitting behind the front. Vertical drop and also in the 10" x10" boxing as shown in the drawing. Necessary beading withmelamine polish for fixing the glass are to be provided.

13

1.00 Nos.

Providing and fixing Cash counting / stiching table to be madeout of 18,12 & 6 mm thk. Commercial ply teak wood beadingfinished with 1mm thk. Laminate. All external side /internal side oilIpaint finished.Including all necessary hardware fittings and lockingsystem as per drg. (Apx.size=3'0"x2'6"htx24"d)

14 Full height Storage /Low Height Storage/ BackStorage(Credenza)providing and fixing in position Full height Storage / low Low Height

Storage/ Back Storage(Credenza) as shown in Drg. respectively

using plywood of required thickness finished with 1mm thick

laminates as shown in the drawing and all sides shall be finished

with white enamel paint as detailed therein.The Storage Units shall be provided with handles (Stainless Steelfinish) as per approval of the project Consultant / Bank.


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

All exposed plywood surfaces to be finished with 1mm th. Laminateof approved make & shade and all exposed edges of plywood tohave 1" x 1/4" T.W. lipping. All exposed T.W. sections to bemelamined in matching colot laminates and internal surfaces tohave white enamel paint as directed. The item to include allnecessary hardware and fitting in Stainless Steel finish, Godrejmultiperpuse locks including magnetic ball catcher etc. complete inall respects.

200.00 Sq.ft. [A] 16 "deep

15 ManagerTable Senior

Providing and fixing in position Manager's Table of size 5'-6" x 2'-6" as per drawing including Side Storage (Credenza) by using25mm thick plywood for top and 18mm thickplywood for all otherhorizontal and vertical members. Telescopic CPU Stand/ readymade keyboard trey shall be provide of approved model and make.Footrest made with T.W. member of size 4" x 1½" finished withfranch polish. Side Storage (Credenza) as per drawing shall beprovided. Facia of Side Storage (Credenza) shall be finished with1mm thick lamiinates as shown in the drawing and all other sidesshall be finished with white enamel paint.

The Side Storage (Credenza) shall be providing with handles(Stainless Steel finish ) and channels as per approval of the projectConsultant /Bank .All exposed plywood surface to be finished with

1mm thick .laminate of approved make & shade, and all exposed

edges of table top & ply verticals to have 1" x 1/4" T.W. lipping .


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

1.00 Nos.

All exposed T.W. sections to be melamined and internal surfacesto have white enamel paint as directed. Item to include plywoodboxing, all necessary hardware and fitting in Stainless Steel finish,lipping to all edges etc. complete in all respects. (Table:-5'6"x30"dx30"ht) (Credenza:- 36"x30"x16")

16 Officer's TableProviding and fixing in position Officer's Table of size 4'-6" x2'-3"as per drawing including Side Storage (Credenza) by using 25mmthick plywood for top and 18mm thickplywood for all otherhorizontal and vertical members. Telescopic CPU Stand/ readymade keyboard trey shall be provide of approved model and make.Footrest made with T.W. member of size 4" x 1½" finished withfranch polish. Side Storage (Credenza) as per drawing shall beprovided. Facia of Side Storage (Credenza) shall be finished with1mm thick lamiinates as shown in the drawing and all other sidesshall be finished with white enamel paint. The Side Storage (Credenza) shall be providing with handles(Stainless Steel finish ) and channels as per approval of the projectConsultant /Bank

2.00 Nos.

All exposed plywood surface to be finished with 1mm thick.laminate of approved make & shade, and all exposed edges oftable top & ply verticals to have 1" x 1/4" T.W. lipping . All exposedT.W. sections to be melamined and internal surfaces to have whiteenamel paint as directed. Item to include plywood boxing, allnecessary hardware and fitting in Stainless Steel finish, lipping toall edges etc. complete in all respects. (Table;- 5'1"x30"x36"h)(Credenza: - 36"x16"x36")


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

17 Staff Table / Counter typeProviding and fixing in position Staff table of size 4'-3" x 2'-0" asper drawing by using 25mm thick plywood for top and 18mm thickplywood for all other horizontal and vertical members. TelescopicCPU Stand / ready made Keyboard tray shall be provided. Drawerunits as per drawing shall be provided with multipurpose Godrejlocks in each drawer. Facia of drawer unit shall be finished with1mm thick laminate and other side shall be finished with whiteenamel paint. The drawers will be provided with handles (StainlessSteel finish) and channels as per approval of the project Consultant/ Bank. All exposed plywood surfaces to be finished with 1mm th.Laminate of approved make & shade and all exposed edges oftable top & ply verticals to have 1" x 1/4" T.W. lipping.

1.00 No.

All exposed T.W. sections to be melamined and internal surfacesto have white enamel paint as directed. The item to includeplywood boxing, all necessary hardware and fitting in StainlessSteel finish, lipping to all edges etc. complete in all respects.3'6"x24'dx30"ht)

18 REVOLVING CHAIRS(METHODEX OR GODREJ MAKE)P & S ergonomically designed & aesthetically designed goodloocking chair for Senior personal, Offices, C.T.O. Clerks, Cash-cabin, visitors.(METHODEX OR GODREJ MAKE) which will becovered with matching fabric of approved make & shade as per theArchitect's instructions.

1.00 Nos. (i)Chair for Manager(METHODEX-AZ01)10.00 Nos. (ii)Chair for Officers/Cleark (METHODEX-X-12)


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

6.00 Nos. (iii)Chair for visitors(METHODEX TCC-3)1.00 Nos. (iv) watchman chair (Basic rate Rs.1500)

19

85.00 Sq.ft.

Providing and fixing Loft shutters/Pantry Platform shutter to be

made out of 2"x1" teak wood frame , 18mm thk. Com. Ply ,

T.W.beading finished with melamine polish , both side 1 mm thk.

Approved laminate incl. all necessary hardware fittings and locking

system as suggested area. and as per drg.

20 VERTICAL BLIENDS

215.00 Sq.ft.

Providing & Fixing in position "VISTA", "AEROLUX" make verticalblinds as per required color, shade, design & type approved by theArchitect, Fixing the same as per instructions of the Architectsinstructions & site conditions.

21

75.00 Sq.ft.

Providing and fixing of Notice board made out of 19mm, 12mmcom. Plywood framing. The back shall be in 6mm thk.come.Plywood with cotton cloth fixed over1/2" thk.Celotex board. Allexposed ply.surfaces are finished in 1 mm thk. Laminate ofapproved shade & make and beading in Melamine finish allcomplete as per design and instruction of the Architect with alllabours and materials.(2'0"x4'0"x3)

22

90.00 Sq.ft.

P & F Internal frame for Glowsignbord & flap door of rolling shutter to be made out of 2"x1" hollow M.S.Pipe,flapdoor finishedwith alco panel, including glowsing board as per drawing and assuggested by an architect. (SIZE: 30'0" X 3'0" )


In figuere In Word

1 2 3 4 5 6 7

Unit



RateItem No.


or less

Item of wok

23

1.00 No.

Providing and fixing Sliding door to be made out of powder coatedalluminium section & 6 mm thk. Frosted glass in toilet area (Apx.7'x3')

[ CONTRACTOR ]Sign :_________________

Total of Part-II Rs.


In figuere In Word

1 2 3 4 5 6 71.0 ELECTRICAL WIRING:1 Supply, Installation, Testing and Commissioning of following point

wiring as per the specifications and drawings. The unit rate for theswitch board and further to point outlet including all hardware,

Unit Item of wok Rate



PART-III- ELECTRICAL/DATA WORK

Item No.


or less

switch board and further to point outlet including all hardware,connector strips, fan hook, outlet boxes, switch boards, switchplates, switches, wire conduits etc. A point shall include in additionto phase and neutral wire, a PVC insulated earth-continuing wirefrom L.P. to the final termination at outlet points. All the wiring should be done in concealed/semi concealed open manner or slab/wall/false ceiling. The wiring should be done with rigid PVCconduits/Casing-capping having minimum of 1.6 mm wall thicknessand minimum 19mm dia with 440V grade PVC insulated. ISIapproved copper conductor wire, with crabtree/ROMA makeswitches and accessories with company boxes for point outletand SB and with all required hardware accessories to completethe wiring. No junction boxes are allowed anywhere in the wiring.All joints shall be done at point outlet on switchboards only.In between joints are not allowed anywhere. The wiring shall be done as per IS 732 and IS 4648.THE COST OF ALL POINTS ARE INCLUDING OF WIRING MAINS(A) Making Zari in the wall & sami finishing the surface.(B) Ball and socket joint wherever required.(C) Earthing of Fittings.


In figuere In Word

1 2 3 4 5 6 7




Item No.


or less

(D) Electrical connections from the outlet points to the fixturewith 3 core flexible wire.(E) The size of the wire will be as follows normal point wiringfrom SB to point outlet boxes.Phase-neutral: 1.5 sq. mm.Earth: 1.0 sq. mm.SB mains from I.p. to SB from I.p to 5 Amp.SB mains from I.p. to SB from I.p to 5 Amp.Plug point for freeze/geyser etc.Phase-neutral: 2.5 sq. mm.Earth: 1.5 sq. mm.Wiring for 15 Amp. Plug point for freeze/geyser etc.Phase-neutral: 4.0 sq. mm.Earth: 2.5 sq. mm.Wiring for 20 Amp. Plug point for A.C.Phase-neutral: 4.0 sq. mm.Earth: 2.5 sq. mm.Two parallel 15 Amp. Plug points for first pointPhase-neutral: 4.0 sq. mm.Earth: 2.5 sq. mm.For second point loopingPhase-neutral: 4.0 sq. mm.Earth: 2.5 sq. mm.

1.1 16.00 No. One light point controlled by one 5 Amp. Switch1.2 18.00 No. Two light point controlled by one 5 Amp. Switch1.3 One 5 Amp. 5 pin socket outlet controlled by one 5 Amp. Switch

11.00 No. looped on switch board.


In figuere In Word

1 2 3 4 5 6 7




Item No.


or less

1.412.00

No.

Two 5 Amp. 5 pin socket & One 15 Amp. 5 pin socket controlled by one 15 Amp. Switch at other convenient location for computer.

1.5 Two 5 Amp. 5 pin socket outlet controlled by one 5 Amp. Switch10.00 No. at other convenient location for Raw Power.

1.6 One 5 Amp. 5 pin socket outlet controlled by one 5 Amp. Switch9.00 No. at other convenient location for wall/Ex. fans./Sep. Points

1.7 One Ceiling fan point controlled by one 5 Amp. Switch with 1.7 One Ceiling fan point controlled by one 5 Amp. Switch with 4.00 No. electronic type fan Regulator

1.8 One buzzer/bell point controlled by one bell push, with electric 2.00 No. type buzzer/bell.

1.9 One 15 Amp. 6 pin socket outlet controlled by one 15 Amp. 6.00 No. Switch with indicator

1.10

7.00 No.

SITC of 20 A, 230 V, with DP MCB all enclosed in a prefabricated M S boxes complete to the satisfaction of E.I.C. For SPLIT AC 1.5TR /2.0 TR unit with necessory require wiring from DB of 2 no of 4.0 sqmm wires and 1 no of 2.5 sqmm PVC Insulated copper conductor wire laying in with 20 mm/25 mm dia PVC rigid conduits 1.5 mm thick ISI mark. These will be used with point wiring of A.C. points, etc

1.11 One 25 Amp. Cyclic Timer for ATM AC Units, complete with required1.00 No. connectors and lugs etc (In Server Room)

1.12 20 Amp power point for Glowsign board with L & T time switch &1.00 No. with 20 Amp. SP MCB

2.0 CABLES & CABLE TERMINATIONS:2.1 Supplying & Laying PVC armoured cable of 1100 V grade of copper/

conductor (as specified) of following sizes in ready made trenchmounted on wall with necessary clamping arrangement or in prelaidRCC hume pipe with necessary cable identification lugs at both


In figuere In Word

1 2 3 4 5 6 7




Item No.


or less

ends, digging of trench and its filing with second call bricks, send.The cable shall ISI mark and conforming to latest ISS. All the cableshall be terminated with suitable sizes of Lugs. & Gland

a 15.00 Mtr. 2 x 6 sq.mm. + 1 x 4 sq. mm.Copper Fle. Wire (for UPS Input/Output)b 40.00 Mtr. 4c x 6 sq. mm. Copper armoured cable (Panel to UPS & POWER DB)c 10.00 Mtr. 4c x 10 sq. mm. Copper armoured cable (Panel to LT & AC DB)d 35.00 Mtr. 4c x 25 sq. mm. Alu. armoured cable (Panel to Generator)d 35.00 Mtr. 4c x 25 sq. mm. Alu. armoured cable (Panel to Generator)e 25.00 Mtr. 3.5 x 50 sq. mm. Alu. armoured cable (Panel to Main SFU)

3.0 EARTHING:3.1 Providing & erecting earthing as per drawing complete earth copper

plate size 600 x 600 x 3.15 mm at the technically respective position with digging of earth & refilling with charcoal & salt complete with masonry enclose made of cast-iron cover plate having lockablearrangement & watering pipe & guide pipe of suitable size to

1.00 No. earth pit (For UPS)3.2 1.00 No. Same as above but G.I. Plate size 600 x 600 x 3.15 mm (For Lighting)3.3 Supply and Laying of 8 SWG Copper wire thick with proper

40.00 Mtr. saddling with minimum distance at 1.5 feet.3.4 Supply and Laying of 8 SWG G.I. wire thick with proper

45.00 Mtr. saddling with minimum distance at 1.5 feet.4.0 FIXTURES AND FITTINGS:

Supply, installation, testing and commissioning of the following fixtures and fittings. The fixtures shall be installed on wall, false ceiling etc. and as per the manufacture instructions. The job also includes the connection of the fixture with outlet point using 3 coreflexible wire Wherever the lighting fixtures are there.

4.1 11.00 No. 2 x 36 W Mirror Optic Fitting 4.2 31.00 No. 15 W LED Down Light Fitting


In figuere In Word

1 2 3 4 5 6 7




Item No.


or less

4.3 8.00 No. 1 x 40W Patti Type Fitting4.5 7.00 No. 16" Wall Fan 4.6 4.00 No. 12" Ceiling Fan4.7 2.00 No. 300mm Exhaust Fan4.8 2.00 No. 1 X 11 mirlotta Type Fitting5.0 PANEL BOARD/DISTRIBUTION BOARDS

Supplying & erecting complete with 14/16 SWG complete floor/Supplying & erecting complete with 14/16 SWG complete floor/wall mountain type with required compartment including cables end box and gland/termination as required.

1.00 No. S.F.U. (HRC type) 250 A -1 no.5.1 Supplying & erecting complete with 14/16 SWG complete floor/

wall mountain type with required compartment including meters& lamps with following materials:Incoming Feeder: S.F.U.(HRC type)200A -1 No.63A Change Over Switch - 1 No.160 A TPN, 440 V, 50 Hz., Cu. Busbar.Outgoing Feeder:* Timer of L & T make Cat. No. 67DDTO digicom Timer with 16A. 4P contactor / Theben make Cat no. SUL 180 a - T180 0 001 ANALOG Timer with L & T make contactor MNX 18 (operating coil voltage 230V, 50 Hz). (24 Hrs.) 1 No. for signage light63A FP MCB - 6 Nos. (For LTDB- 1, AC DB - 2, PDB- 1, ATM -1 & SPARE- 1) & 40A DP MCB - 1 No. (For Glow Sign Board)AVF Digital Meter of Trinity/Enercon Make with load balance ratio

1.00 No. R Y B Lamp with indicator and required cable glands etc.


In figuere In Word

1 2 3 4 5 6 7




Item No.


or less

5.2 Supplying & Installing, Testing & Commissioning of DBwith following: (For Lighting Purpose)Incoming: 63 A FP 100mA ELCB-1No.Outgoing: 40 A DP MCB-3 Nos.

1.00 No. 16/10/25 Amp. SP MCB -12 Nos.5.3 Supplying, installing, testing & commission of Distribution Board

with following: (For A.C. Units)with following: (For A.C. Units)Incoming: 63 A FP MCB-1No.

2.00 No. Outgoing: 25 A DP MCB-5 Nos.5.4 Supplying, installing, testing & commission of Distribution Board

with following: (For 15A Power Points & Raw Power Points)Incoming: 63 A FP MCB-1No.

1.00 No. Outgoing: 10/16 A SP MCB - 12 Nos.5.5 Supplying, installing, testing & commission of Distribution Board

with following: (For UPS Units)Incoming: 63 A DP 100mA ELCB - 1 No.

2.00 No. Outgoing: 10/16 A SP MCB - 6 Nos.5.6 Supplying, installing, testing & commission of Distribution Board

with following: (For UPS Input DB)Incoming: 63 A FP MCB - 1 No. & 40A DP MCB -1No.

1.00 No. Outgoing: 40 DP MCB -2 No.


In figuere In Word

1 2 3 4 5 6 7




Item No.


or less

6.0 INTERCOM TELEPHONE6.1 SITC telephone point with Telephine socket outlets of RJ 11 with concealed

boxes in walls/furniture's etc. SITC of 2 pair of 0.51 cross section pvc insulated copper conductor telephone wire of ITI approved with 20/25 dia. PVC conduits with accessories duly burried under floor with necessary chasing / breaking in floor and to be refinished with all necessary civil material etc. or to be cleated on wall / ceiling with saddles / spacer etc.

12.00 No.

material etc. or to be cleated on wall / ceiling with saddles / spacer etc. necessary termination etc. for intercom Tele. facility (20 nos.) + Fax Tele. facility (2 nos.) + for Direct Tele. facility (2 nos.)

6.2 2.00 No. Supply & installation of 20 pair crone terminal DP Box. Krone make7.0 LAN/STRUCTURE CABLING WORK:7.1

17.00 No.

Supplying and installation of computer data cable CAT-6 of D-Link Brand Make including PVC pipe 25mm dia. 1.5mm thick, recessed in counter necessary, ceiling, wall or shorting in concealled way in during cutting and plastering as required. including connection with RJ-45 on both end. with Cable (Including 1 for LCD, 2 for ATM, 2 for IP Phone)

7.2 Supply & testing at patch cord. (Factory Built)a 15.00 No. Length 1 Meter (Make D-Link) (If Required)b 15.00 No. Length 2 Meter (Make D-Link) (If Required)

7.3 Supply, installation & testing of 12U Rack with 1 fan & power point1.00 No. having one shelf in the rack


In figuere In Word

1 2 3 4 5 6 7




Item No.


or less

7.4 15.00 No. Supply & Crimping of RJ-45 Connector with proper testing7.5 Providing, installing, testing, commissioning of CAT 6 UTP pvc

insulated copper conductor data cable of D - Link with 20/25 dia.PVC conduits with accessories duly burried under floor with necessary chasing / breaking in floor and to be refinished with all necessary civil material etc. or to be cleated on wall / ceiling with saddles / spacer etc. necessary termination etc. with ferrule numbering at both ends of each

120.00 Mtr.

necessary termination etc. with ferrule numbering at both ends of each piece of cable complete.[ 2 Lines from BSNL Krone to new krone].

7.6

12.00 No.

S & I of 300 x 300 x 40 mm size GI box including the top cover duly fabricated from 18 SWG m. s. Sheet complete with necessary knock outs at all the sides of box for conduit entries duly fixed in floor, incl. breaking in floor & re-finished the same etc.complete (Wire Draw Box)

7.7

12.00 No.

S & I of 150 x 150 x 25 mm size GI box including the top cover duly fabricated from 18 SWG m. s. Sheet complete with necessary knock outs at all the sides of box for conduit entries duly fixed in floor, incl. breaking in floor & re-finished the same etc.complete (Wire Draw Box)

7.8

1.00 No.

SITC of 1.5 sq. mm. 3 core flexible cable of approved make (4mtr. Length) with M.S. flexible pipe & 15amp. 3 pin top of approved make for the supply of locker room.

7.91.00 No.

SITC of CABLE TV cable line with proper fixing & connecting with modular Co-Axial TV Socket

8.0 MUSIC - CUM - PA - SYSTEM8.1

6.00 Pts

S & I of point wiring for music - cum PA system comprising of 2x 1.0 sqmm stranded , copper conductor , flexible PVC insulated and PVC Sheathed wire pulled through 20 mm dia .PVC heavy gauge conduits and looped from one speaker to other and to the volume


In figuere In Word

1 2 3 4 5 6 7




Item No.


or less

8.26.00 No.

S & I of Bosch/Ahuja make music speaker flush mounted on the false ceiling with proper clamping arrangement

8.3

2.00 No.

S & I of volume control - cum - ON - OFF switch flush mounted on wall along with other electrical switches .The size and plate of the regulating knob should match with other switches nearby (MK )

8.4

1.00 SetS & I of 100 Watts BOSCH/Ahuja make Central Music System Amplifier and MP3/CD Player with FM facility of make Samsung/Onida/LG 1.00 Set MP3/CD Player with FM facility of make Samsung/Onida/LG

Sign :_________________[ CONTRACTOR ]

Total of Part-III Rs.


In figure In word1 2 3 4 5 6 71 Hi wall Split A.C.air cooled type complete with the

following components as detailed in the section AIRCOOLED SPILT AIR CONDITIONERS.

3.00 Nos. 1.0 Ton (4 Star)4.00 Nos. 1.5 Ton (3 Star)

2 Installation, Testing and Commissioning of Hi wall splitair conditioners.

7.00 Nos. 1.5 /2.0 Ton Hi wall Split type A.C.3 65.00 R.mt. Copper piping 1/4"+1/2" Refrigerant piping4 72.00 R.mt. Electrical Cabling electrical cable 3C/1.5 sq.mm5 7.00 Nos. M.S.Angle stands for outdoor units6 55.00 R.mt. Rigid PVC Drain piping7 1.00 Nos. Electronic timer8 1.00 Job Trenching / Civil work

PART-IV-AIR CONDITIONING WORK

Item No.


or less


We agree to do above work as per Tenders Term & Conditions & above rate fixed by we are agree to believe final decision of Architect /Engineer in change incase of any dispute.

Sign :_________________[ CONTRACTOR ]



Total of Part-IV Rs.Net Total of Part-I to IV Rs.

[ Rupees __________________________________________________________________________________________only ]


Documents

csadsad vvskskQQ bbUUffMM;;kk - bankofindia.co.in · 01 Rigid P.V.C. Pipe 25mm dia., 1.5mm thick, Godavari ... 06 Telephone & Computer Wire D-Link ... 5MM size with top and bottom