Upload
lytu
View
220
Download
0
Embed Size (px)
Citation preview
2
Thank you for purchasing this product, please read the user manual
carefully before you use notes, and keep, for viewing at any time.
Directory
A Product introduction .........................................................................3
A1 security warning signs..........................................................................3
A2 features .................................................................................................3
A3 explanation ...........................................................................................4
A4 working principle .................................................................................4
A5 parameters ...........................................................................................4
B Equipment structure .........................................................................5
B1 safe use ................................................................................................5
B2 equipment parts ..................................................................................5
B3 vacuum handle suction diagram ......................................................6
C Operation steps .................................................................................7
D Treatment notice ..............................................................................9
E Security consideration ......................................................................9
E1 warning ...............................................................................................11
E2 attention ..............................................................................................10
E3 disabled people ...................................................................................11
F Main machine ..................................................................................12
F1 operating handles ................................................................................12
F2 screen interface ...................................................................................12
F3 inspection and maintenance ...............................................................13
G Warranty .........................................................................................14
3
A Product introduction
A1 Security warning signs.
External identifier pause
Pause working
High voltage danger Electric flag
A2 Features
. Current non-surgical medical beauty technology hot spots;
· Fat dissolving technology more advanced than liposuction;
· Novel the opposite of Europe's hottest diets;
· Area can be up to 26% of fat destruction technologies;
· Frozen cold grease. 40K, radio frequency melting fat blasting fat and fat body fat-soluble, with
4
frozen new technologies;
· A selective up to reduce waist fat, back fat and fat micro-invasive technology;
A3 Explanation
For many years, people have been running out of ways cutting extra parts of the body fat, such as
liposuction, laser melting fat, strong sound waves by blasting fat method, radio-frequency method
of melting fat, Cryolipolysis frozen fat dissolving method and latest technology and heating
instead of new and more efficient than other means of non-invasive methods.
A revolutionary new concept of melting fat. Use have since been proven to be in the weight loss fat
dissolving a major victory in the war.
For those food and regular exercise, but is still not throwing off partial fat people, freezing melting
fat is a godsend. Whether on lipid peroxidation of fats is also more intensive parts of smaller parts,
such as the love muscle (on both sides of the waist above the hips loose dewlap), abdominal fat in
belly and back, the freezing effect of melting fat are is dumbfounded.
A4 Working principle
Use of fatty acid and glycerol in three specific will be transformed into the characteristics of solid
at low temperatures, transmitted through non-invasive transmitter wave to specify precise control
at low temperature melting fat parts for and eliminate fat cells. After the fat cells in the cold, will
start the natural decomposition of the purge process, fat layer becomes thin. Through normal
metabolic processes, the fat layer gradually reduced, reach the purpose of partial melting fat.
A5 Parameters
Screen: 8 inch true color touch screen
Cavitation frequency :40Khz
RF :5Mhz multipolar RF
5
Input voltage :110V/220V 50HZ-60HZ
Input power :≤400W
Temperature :-5℃---0℃
B Equipment structure
The products mainly include the host, accessories (40K powerful sonic blast fat head, 5Mhz RF
head, frozen fat head)
B1 Safe use
B2 Equipment parts
Vent
Vacuum Valve
Fuse
Vacuum filter
Power switch
Power jack
Watering in
Cooling fan
Drop Water
6
Vacuum valve: adjust the strength of negative pressure head size (screw clockwise to increase the
strength, or counterclockwise twist is to reduce the intensity).
Cryolipolysis suction head output: connection freezing fat head.
Cooling fan : safety device, thermal absorption, and then spread to the outside of the chassis,
ensure normal temperature for the host part.
Power switch: turn on the power switch, led lights, note instrument enters the standby state.
Fuse : insurance tube for protection.
40K focus on high acoustic output: connection 40K focus strong acoustic head.
5Mhz multipolar RF output: connect five radio head
Filter glasses: Please clean the filter regularly, and ensure that the normal use of the vacuum head.
Power Jack: connect the power cord.
On the line that corresponds to the connection to the power supply socket, turn on the power
switch, led lights, note for standby instruments, turn the key switch, and finally to d-emergency
switch, instrument status at this time.
B3 Vacuum handle suction diagram
Vacuum suction diagram
Vacuum discharge intensity +
Vacuum suction intensity +
Vacuum discharge intensity -
Vacuum suction intensity -
Start /pause
7
C Operation steps
Step 1:operate the cavitation handle set the
working time about 10-15 minutes.
Choose the best intensity depends on the client's feelings
Press the start and start get in the cavitation treatment 。
Operated over, return the main interface choose next function。
Step2:5Mhz multipolar RF ,set the
working time about 10-15 minutes.
Choose the best RF intensity depends on
the client's feelings ,Press the start and
start get in the RF treatment 。
Operated over, return the main interface choose next function。
Step3 :Cryolipolysis suction head operate,
Gap along the bags open with her hands freezing film
。
Hold the freezing film
8
Put the freezing film on the treatment area 。
Adsorption treatment of head in the treatment position,
first open the start key on the Control Panel, and then open the
start of negative pressure on the handle,
Negative-pressure heads into a working state,
to set good working time (15 minutes),
choosing the required strength,
Strength is subject to customers under.
Click on the "start" key to enter the State.
Hit the fat layer deep inhalation in the treatment of head
9
Remove the treatment, treatment of silt parts appear red.
Zero intensity, operation is complete.
D Treatment notice
1.Therapy probes must be close contact with the skin.
2.Hairdresser when you adjust the strength, good communication with the customer.
3.When the operation is finished, clean the skin with hot towels.
4.When nursing to a circle or a straight line motion, don't stay in the same position. Action or
pull up to coherence.
E Security consideration
E1 Warning
1.Connected or disconnected vacuum head when disconnected, the close connection duct on the
left hand, right hand hold metal parts, to rotate in the counterclockwise direction (as shown in the
figure on the left). When connected, close connection duct on the left hand, right hand hold metal
parts, to rotate in the clockwise direction.
2.In the heat of the summer, freezing probe after half an hour of work, if there is a freezing of
unsatisfactory circumstances, proposal to inject water or ice in the water into the tank into the
condensing agent (refrigerant), ensure that the ice can achieve better cooling effect.
10
3.Instrument belongs to the high-precision electronic instruments, custody and placement of time,
must not be placed in a wet place.
4.The instruments used in all automatic operation control chip, so when in use, around and try not
to use high frequency electronics, so as not to interfere with the normal operation of the equipment
used. (Like volume, hair dryer, microwave instruments, etc). If interference occurs, there are two
kinds of phenomenon (a. normal use when sudden panic b. LCD appears jumping), the general
solution is to turn off the power source and restart the instrument.
5.You can't put up with setbacks, strong impact.
6.Instrument host and accessories needs regular cleaning and care, especially do not let water into
the main instrument.
7.If not for a long time, it is best to use a damp-proof bag and dust protection instruments as a
whole, best power up about 15 days work for an hour, so that electronic devices inside the wet
aged.
E2 Attention
Prohibited uses under the following circumstances:
1) power plug wire is broken or when hot;
2) when Jack is loose or shaking;
3) against damaged, machining, bending, twisting the plug;
4) operations which do not just pull the plug;
5) prohibit the use of other power cord;
6) place Baby, children can not reach;
7) Prohibition of the chemicals used to clean the instrument.
8) prohibiting plug plug with wet hands;
11
E3 Disabled people
1, skin wounds, avoid the wound or not.
2, epileptics are banned.
3, in patients with heart disease (such as irregular heartbeat), especially with cardiac pacemakers
are banned.
4 patients with infectious diseases, cancer patients do ban, ban.
6, pregnant women do ban.
7, major surgery, diabetes patients forbidden to do.
8, any metal in the body. forbidden to do.
9, female physiological cycles, it is best to not do.
12
F Main machine
F1 operating handles
F2 screen interface
Accessory images
40K Cavitation
5Mhz multipolar RF
Cryolipolysis suction head
Funnel to watering
13
F3 inspection and maintenance
1.Each parts belong to the precision of the device, and when completed, be sure to pay attention to
maintenance, so as to avoid their shorten service life.
2.Fittings to handle with care, be sure to note with a handle, don't randomly carried out line, easily
fitting inside the connector is loose, resulting in poor contact and short circuit.
3.Parts used is completed, do not randomly drop, should carefully clean with a clean liquid
combined with clean touch cloth, placed on the gallows. Recommended saline solution or a little
cleaner for surface cleaning.
4.40K strong and explosive fat head time to 30 minutes of continuous work, when after 30 minutes
of work, probes should be allowed to rest for 5 minutes, until surface temperatures lower, then
14
continue to use, when the accessories when not in use, be sure to remove the parts, put on the
gallows in must not allow it to dry, so as not to burn out the probe.
5.Freezing fat head: you must pay attention to clean, complete, when it finds a host of essential oil
in the filter or full time, be sure to clean your filter product, so as not to affect the suction.
G Warranty
This machine from the date of purchase (with notes) hosts one year warranty, free
repair quality problems occur within three months, three months later as a result of
problems will charge a maintenance fee. Three-month parts warranty, quality
problems within one month, free repair, charging parts after a month maintenance
fee. Others have passed warranty period, can also be responsible for the maintenance,
charging costs of spare parts and consumables. If you need to add or to purchase
please contact us.
Caused by the use of personal fault, does not provide free warranty service.
Unauthorized access, modified this product failure;
Accidentally put up with setbacks, dropping as a result of the failure;
Failures caused by the lack of proper maintenance; no proper guidance as a result of
the failure of the instructions for use.