Embed Size (px)
Citation preview
Product Finished Unfinished Max Units Tooth #
o SLM NP o o 14
o SLM Noble 25 o o 8
o SLM Noble 85 o o 3
o SLM High Noble o o 6
o SLM Captek o 1
Product Full Contour Frame Max Units Tooth #
o Argedent Euro o o 6
o Argedent 40 o o 6
o Argedent 54 o o 6
o Argedent Y73 o o 6
o Olympia o o 6
o Argelite 70+ o o 6
o Argelite 71 o o 6
o Argelite 61 o o 6
o Argelite 61+3 o o 6
o Argebond 80 o o 6
o NobleCrown NF o o 6
o NobleBond o o 6
o Argedent 90 o o 6
o Argedent Bio 880PF o o 6
o Argelite 76 SF+ o o 6
o Argelite 58P o o 6
o Argeloy NP Supreme o o 6
o Argenco W o 3
o Argenco Y+ o 3
o Argenco 40 o 3
o Argenco 40 HN o 3
o Argenco 46 o 3
o Argenco 58 o 3
o Argenco 75 o 3
o Argenco 62 o 3
Product Full Contour Frame Max Units Tooth #
o Au58 o 4
o Au2 o 4
Product Full Contour Frame Max Units Tooth #
o Printed o o 14
o Milled o o 14
o Carvable o o 14
Product Full Contour Shade** Max Units Tooth #
o Standard o 14
o Transitional o 14
ProductFull
ContourFrame Shade*
Max Units
Tooth #
o ArgenZ Anterior Strength: 765 MPa
o o 3
o ArgenZ HT+ Strength: 1250 MPa
o o 14
o ArgenZ Esthetic Strength: 1100 MPa
o o 14
o ArgenZ Ultra Strength: 1400 MPa
o 14
SLM ArgenZ ZIRCONIA
CUTBACK
PONTIC TYPE
ArgenPMMA
ArgenWAX
COLLARS
OCCLUSAL CLEARANCE
PRESCRIPTION NOTES
DPM
ArgenMILL
Z-1 Z-2 Z-3 Z-0
0.0 T-0
0.5 T-1
1.0 T-2
1.5 T-3
Distance fromGingiva (mm):
Hygenic
Conical
Modified
Ridge Lap
Ovate
SaddleRidge
For questions or assistance, please call Argen Design at (858) 626-8648.
Interproximal SupportJBBuccal CollarFull Occlusion
Y-90 Y-180 Y-36090º Collar 360º Collar180º Collar
13222_Rev I
o Design Approval Needed
o Splited o Open Contact o Screw Access Hole
o No Design Approval Needed
o Porclein Margins o Closed Contact
0.0 0.10 0.25
0.0 0.10 0.25
0.50
0.50
Account #: ___________________________________ Lab Name: _______________________________
Email: _____________________________________ Phone: __________________________________
Ship to: ________________________________________________________________________________________
Case Name / Pan #: _________________________________________________________________________________
CROWN & BRIDGE LAB SLIP
*Available ArgenZ Shades: Vita® Classic: A1 - D4 Bleach shades: OM1, OM2, OM3 and White
**Available ArgenPMMA Shades: Standard: A1 - D4, BL Transitional: A1, A2, A3, B1, B2, BL
IMPORTANT TIPS TO REMEMBER:o Don’t forget to include your articulated soft tissue model. Send a bite with the case to ensure articulators do not break during transit.
o DO NOT INCLUDE die hardner, impressions, or dies with undercuts.
o Air bill labels should read: ATTN. Scan and Design.
o Fill out all aspects of the RX form completely. If left blank, default values highlighted in RED will be used.
Product Size* Tooth #
o ASTRA TECH™ EV** o 3.0 o 3.6 o 4.2 o 4.8 o 5.4
o ASTRA TECH™ OsseoSpeed TX** o 3.5 / 4.0 o 4.5 / 5.0
o BioHorizons Internal®** o 3.0 o 3.5 o 4.5 o 5.7
o Biomet 3i™ Certain** o 3.4 NP o 4.1 RP o 5.0 WP
o Biomet 3i™ OSSEOTITE** o 3.5 o 4.1 o 5.1
o CAMLOG®** o 3.3 o 3.8 o 4.3 o 5.0
o Dentsply Friadent XiVE®** o 3.4 o 3.8 o 4.5 o 5.5
o Hiossen ET / HG®** o 3.5 o 4.0 / 4.5 / 5.0 / 6.0
o Neoss®** o 3.5 / 4.0 / 4.5 / 5.0 / 5.5
o NobelActive®** o 3.5 NP o 4.3 / 5.0 RP
o NobelReplace Select®** o 3.5 NP o 4.3 RP o 5.0 WP o 6.0
o Nobel Brånemark®** o 3.5 o 4.1 o 5.1
o Straumann Bone Level®** o 3.3 NC o 4.1 / 4.8 RC
o Straumann SynOcta®** o 3.5 NN o 4.8 RN o 6.5 WN
o Zimmer Tapered Screw-Vent®** o 3.5 o 4.5 o 5.7
ProductGold
ShadedRetention
Lines Material Tooth #
o Titanium Custom Abutment o o Titanium
o Zirconia Hybrid Custom Abutment
oo HT+
Shade*: _______
o EstheticShade*: _______
o UltraShade*: _______
o Anatomical Zirconia Hybrid Custom Abutment
oo HT+
Shade*: _______
o EstheticShade*: _______
o UltraShade*: _______
o Screw Retained Full Contour Zirconia Custom Abutment
oo HT+
Shade*: _______
o EstheticShade*: _______
o UltraShade*: _______
o SLM NP Custom Hybrid o SLM NP
IMPLANT SYSTEM
LINGUAL MARGIN
MESIAL MARGIN
DISTAL MARGIN
PRESCRIPTION NOTES
MARGIN PREPARATION
TISSUE DISPLACEMENT
ArgenIS CUSTOM ABUTMENT TYPE
BUCCAL MARGIN
EMERGENCE PROFILE
IMPORTANT TIPS TO REMEMBER:o Don’t forget to include your articulated soft tissue model. Send a bite with the case to ensure articulators do not break during transit.
o DO NOT INCLUDE die hardner, impressions, or dies with undercuts.
o Air bill labels should read: ATTN. Scan and Design.
o Fill out all aspects of the RX form completely. If left blank, default values highlighted in RED will be used.
* Only sizes listed are available. See the ArgenIS Impland Connection Guide for all available platforms.** Not trademarks of the Argen Corporation.
Concave Convex AE-1 AE-2 AE-3 ooo
Straight(Default)
ooo
AP-1 AP-2 AP-3 Moderate
Shoulder (Default)Shoulder Chamfer
For questions or assistance, please call Argen Design at (858) 626-8648.
Occlusion: 2.0mm (default)
Other: _______
o
o
oNone0.25mm Support Tissue
Up to 1.0mm Contour Tissue o
Up to 2.0mm Full Anatomical
o Design Approval Needed
o No Design Approval Needed
o Add Position Guide
Account #: ___________________________________ Lab Name: _______________________________
Email: _____________________________________ Phone: __________________________________
Ship to: ________________________________________________________________________________________
Case Name / Pan #: _________________________________________________________________________________
IMPLANT LAB SLIP
o ABM-1 Supra Gingival +0.5mm
o ALM-1 Supra Gingival +0.5mm
o AMM-1 Supra Gingival +0.5mm
o ADM-1 Supra Gingival +0.5mm
o ABM-2 Tissue Level
o ALM-2 Tissue Height
o AMM-2 Tissue Height
o ADM-2 Tissue Height
o ABM-3 Sub Gingival -0.5mm
o ALM-3 Sub Gingival -0.5mm
o AMM-3 Sub Gingival -0.75mm
o ADM-3 Sub Gingival -0.75mm
o ABM-4 Sub Gingival -1.0mm
o ALM-4 Sub Gingival -1.0mm
o AMM-4 Sub Gingival -1.0mm
o ADM-4 Sub Gingival -1.0mm
*Available ArgenZ Shades: Vita® Classic: A1 - D4 Bleach shades: OM1, OM2, OM3 and White
13222_Rev I
