Crossover 183 Drill Rig (SPT, CPT & Auger Combination)

CROSSOVER 183 DRILL RIGSPT, CPT & Auger Combination


The perfect union...

TMG manufactures the first ever purpose built combination SPT, CPT and auger drill rig. Having the versatility to auger drill, rotary/mud drill, SPT hammer testing and full function CPT testing in ONE compact track mounted drill rig is a first in the industry. Engineers can now invest in one machine to test soils using SPT or CPT technologies. The cost savings is tremendous.

The crossover rig has a three drilling position mast. Position one has a standard rotary drill head attached to a wet swivel for mud rotary drilling. Position two has a powerful auger drive to do virtually any type of auger drilling and position three is the unique custom hydraulic clamp style CPT drive head.

Engine83.8 hp (62.5 kW) turbo charged 4 cylinder diesel engine

Hydraulic system60 gpm (227 lpm) max hydraulic flow.Hawe hydraulics power unit

Tracks systemStationary track system (300 mm wide 1727 mm long - 11.8” wide 68” long -)

Multipurpose Mast20 ton dual cylinder multipurpose mast for CPT, SPT, auger and rotary drilling

Scan this QR Code for online product

information.

www.tmgmfg.com

14.5 in 36.8 cm

63.8 in 162 cm

114.74 in 291.43 cm

143.5 in 364.4 cm

150 in 381 cm

84.5 in 214.6 cm

229.7 in 583.4 cm

135.4 in 343.9 cm


Engine Qty: 1

• 83.8 hp (62.5 kW) turbo charged 4 cylinder diesel engine.• Water cooled.• 3.319 liter displacement.• Radiator cooling system.• 12 V electric start.• 2500 rpm.• Direct injection.• Keyless engine start.• Emergency stop button.• RPM gauge.• Oil pressure gauge.• Oil level light.

• Three position drill head (rotary drill, auger drill, CPT head).

• Standard drill head options: Option1: Max RPM - 458 Max torque - 703 ft lbs (953 Nm) Option 2: Max RPM - 364 Max torque - 935 ft lbs (1,269 Nm)• See more drill head options and upgrades on page 4.

• Auger/Helical drive head with hydraulic motor and gear drive.

• 4706 ft lb (6,380 Nm) torque theoretical, 3859 ft/lbs (5,232 Nm) actual.

• Torque, 40 max rpm, max 7,000 lbs (3,175 kg) pull out force, 2” hex shaft.

• Other auger head options available.

• Top down CPT push system or hydraulic clamp push system.

• Moyno 3L6. Continuous flow stator / rotor style mud pump.• Up to 225 psi (15.5 Bar).• 50 gpm flow (189 lpm).• Independent hydraulic motor.• Mounted on drill rig frame.• Other mud pump options availble.

• Manual SPT hammer with rotary capson.• (Optional automatic SPT hammer conform to ASTM D1586-

99 standard test method for penetration test and split barrel sampling of soils.)

• Hawe hydraulics power unit.• 60 gpm (227 lpm) max hydraulic flow.• Max 3000 psi (206 Bar).• Pressure and load sensing variable displacement axial

piston pump.• Feather touch controls.• Oil cooler.• In tank oil filter.

• 300mm Wide rubber tracks.• NACHI 3B Track motor with automatic brake system.• Built in grease filled tensioning arm and spring.

• 20 ton dual cylinder multipurpose mast for CPT, SPT, auger and rotary drilling.

• Cylinder with external linear position sensor for CPT operations.

• 4” (10.16 cm) ID cylinder with 2” (5.08 cm) cylinder rods.• 7 ft (2.13 m) stroke.• Max 20 ton (57,000 lbs) pull down force.• Max pull up force 5,669 kg (12,500 lbs).• With travel speed control (for CPT 2 cm/sec).

• Single head pipe clamp (double breakout clamp available).

Hydraulic system

Track system

Mast

Pipe clamp

Telescopic SPT tower

Qty: 1

Qty: 2

Qty: 1

Qty: 1

Qty: 1

• Telescopic SPT tower.• 19ft (5.8m) max height.

Drive head

Drill motor 1 - Rotary

Drill motor 2 - Auger

Drill motor 3 - CPT

Mud pump

SPT hammer and capson

Qty: 1

Qty: 1

Qty: 1

Qty: 1

Qty: 1

Qty: 1

www.tmgmfg.com

• 4500 lb (2,041kg) lift capacity.• Planetary gear.• 10 second travel cycle.• Balance weight and locking hook.• ¼”- ½” rope diameter (6-12 mm).• Other winch available.

Lifting winch Qty: 1


DRILL HEAD OPTIONS AND UPGRADES

• Standard equipment.• Controller datapack with data acquisition software.• Cone - 10 cm, 10 ton penetrometer, with friction sleeve,

pore pressure transducer and dual axis inclinometer.• 30 meters cable.• 30 x 1 meter long cone rods 1.44” O.D.• Cylinder mounted marker with encoder.• Interface, elect-hydraulic drive with head load.• Spare parts:• 8 x piezocone 10cm cone tips.• 8 x 1.44” piezo filter HT (10 per pkg - in silicone).• 4 x friction sleeve 1.44”.• 2 x retaining O-ring kit.• 4 x 10cm cone O-ring kit.• Other equipment options available.

• 10,875 lbs (4,932 kg) Dry.• 11,750 lbs (5,329 kg) Wet.

• 2.5 - 3.5 mph (4 - 5 kph).

• Raised main body frame 14.5” (38.8 cm) bottom clearance for multi terrain application.

• 4 hydraulic level outriggers with independent controls.

• 20 gallon (75 liters) fuel tank with fuel sending sensor.

• 60 gallon (227 liters) hydraulic oil tank with built in site level glass.

CPT equipment (Vertek CPT)

Approximate weight

Travel speed

Ground clearance

Leveling outriggers

Fuel tank

Hydraulic oil tank

Qty: 1

Qty: 4

Qty: 1

Qty: 1

www.tmgmfg.com

• Built in rod and casing storage racks with tie down connectors.

• Dual self-anchoring mast system with minimum 20 ton reactive force anchors.

• Manual locking.

Rod and casing storage

Anchoring system (for CPT operations)

Qty: 1

Qty: 2

• Side input wet swivel.• Various thread options available).

Wet swivel Qty: 1

Model Max RPM Max torque ft lbs Max torque Nm

71-434-V-A71-434-V-C71-434-V-E71-434-V-F71-244-V-A71-244-V-B71-244-V-C71-432-V-171-432-V-271-432-V-3

*** Other options available

1,000 RPM648 RPM405 RPM202 RPM600 RPM480 RPM375 RPM150 RPM200 RPM420 RPM

3055 ft lbs4192 ft lbs5476 ft lbs6170 ft lbs1624 ft lbs1734 ft lbs1897 ft lbs2804 ft lbs2288 ft lbs1107 ft lbs

4142.02 Nm5683.58 Nm7424.45 Nm8365.39 Nm2201.84 Nm2350.98 Nm2571.98 Nm3801.71 Nm3102.11 Nm1500.89 Nm


www.tmgmfg.com

Address: 5517 W. Sligh Ave, suite 100. Tampa, FL 33634Phone number: (813) 464-2299Toll-Free number: 1-888-508-RIGS (7447)Fax: (813) 881-1199E-mail: [email protected]: www.tmgmfg.com

Facebook: TMGManufacturingYoutube: TMGManufacturingInstagram: TMGManufacturingLinkedin: TMG-Manufacturing

Documents

Crossover 183 Drill Rig (SPT, CPT & Auger Combination)