Crossville, Inc. • P.O. Box 1168, Crossville, TN 38557 • Phone: 931.484.2110 • Fax: 931.456.2956

E-Mail: Crossc@CrossvilleInc.com • CrossvilleInc.com

Porcelain Stone®

Cross-Colors®

Cross-Colors® Solids Color Palette

Cross-Colors® LP Color Palette

A215 Empress White* I

A634 Terra Rosata I

B220 Doeskin

B380 Sunflower

B120 Peach Fresco

C360 Maple Sugar I

B110 Antico Taupe

B100 Greige Patino

A870 Seal Taupe* I

B190 Amethyst

B210 Seabreeze

B230 Zeolite B200 Primavera

B481 Forest Green

C583 Windsurf III

B180 Lapis

B580 Oceana

A890 Ebony III

C310 Bamboo III C370 Featherstone I C810 Platinum I C400 Bayberry III

Price Groups

AC American Classics

I Group I

II Group II

III Group III

The codes for A-Series tile shown begin with the letter “A”. The codes for B-Series and C-Series tile begin with the letters “B” and “C” respectively.

*Thesecolorsareinventoriedin6x6,UPSfinish,atCrossville®.Allother6x6colorsandfinishesarespecialorder.

LA26 UPS White Coral I

LA58 UPS Blue Splash III

LA90 UPS Granite Grey II

LA26 PO White Coral I

LA58 PO Blue Splash III

LA90 PO Granite Grey II

LA87 UPS Cappuccino I

LA48 UPS Snowpine III

LA63 UPS Red Rock II

LA87 PO Cappuccino I

LA48 PO Snowpine III

LA63 PO Red Rock II

LA21 UPS Rock Crystal II

LA45 UPS Jadestone III

LA88 UPS Black Pearl III

LA21 PO Rock Crystal II

LA45 PO Jadestone III

LA88 PO Black Pearl III

Crossville, Inc. • P.O. Box 1168, Crossville, TN 38557 • Phone: 931.484.2110 • Fax: 931.456.2956

E-Mail: Crossc@CrossvilleInc.com • CrossvilleInc.com

Porcelain Stone®

Cross-Colors®

A235 Sahara Dune* II

A236 Flax II

A375 Saffron II

A745 Tawny II

A880 Onyx* II

A238 Shetland II

A750 Brown Tweed* I

A740 Nutmeg I

A760 Spice Mist* I

EC001 Storm† 40% 8x8Cross-Sheen

R001 Gray Mingle 40% Availablein8x8only

EC001 Storm† 40% 8x8Cross-Tread

A291 Pepper Quartz* II

A233 Sand Bisque* AC

A675 Stonehenge* AC

A660 Rosewood I

A260 Pebble* II

A658 Fawn I

A876 Truffle* I

A790 Burgundy Smoke* AC

A246 Pacific Surf* II

A485 Rain Forest II

A900 Mica* AC

A410 Greenbriar II

A825 Mercury* AC

A830 Atlantic Grey I

A585 Sea Mist* II

A850 Graphite* AC

Cross-Colors Mingles Color Palette

* These colors are inventoried in cut/bevel 6 x 6, UPS finish, at Crossville®. All other 6 x 6 colors and finishes are special order.

Note: The cut/bevel tile is cut from larger format tile and the edges are beveled to provide a factory appearance. Please allow two to eight weeks for delivery depending on Crossville’s production schedule.

† Coordinating 6 x 8 Cove Base, 6 x 8 Cove Base Corners, and 1 x 6 inside/outside Cove Base Corner available.

• The codes for A-Series tile shown above begin with the letter “A”. The codes for B-Series and C-Series tile begin with the letters “B” and “C” respectively.

Price Groups

AC American Classics

I Group I

II Group II

III Group III

Sizes & FinishesMingles and Solids

Nominal (in) Actual (in) Thickness (in) Finish

6 x 6 (cut/bevel)* 5-3/4 x 5-3/4 5/16 UPS/PO

8 x 8 (A/C Colors) 7-3/4 x 7-3/4 5/16 UPS/PO

12 x 12 11-3/4 x 11-3/4 5/16 UPS/PO

Cross-Colors LP

Nominal (in) Actual (in) Thickness (in) Finish

6 x 6 (cut/bevel)* 5-3/4 x 5-3/4 5/16 UPS/PO

12 x 12 11-3/4 x 11-3/4 5/16 UPS/PO

* The cut/bevel tile is cut from larger format tile and the edges are beveled to provide a factory appearance. Please allow two to eight weeks for delivery depending on Crossville’s production schedule.

Our Porcelain Stone® products are available in popular plank shapes with no minimum order and quick fulfillment. Depending on the product, there are up to 4 widths and 7 lengths, creating more than 2,796 combinations.

Get Planked!

Crossville, Inc. • P.O. Box 1168, Crossville, TN 38557 • Phone: 931.484.2110 • Fax: 931.456.2956 • E-Mail: Crossc@CrossvilleInc.com • CrossvilleInc.com

Porcelain Stone®

Cross-Colors®

Shade & Texture Index

Cross-Colors® has a shade variation of V1.

V2 V3 V4V1 V1 Uniform appearanceV2 Slight VariationV3 Moderate VariationV4 Substantial Variation

Coordinating Trim

A Series Trim Program (available in UPS finish only) B Series Trim Program C Series Trim Program

Size 6 x 8 1 x 6 Inside & Outside 6 x 8 Left & Right 4 x 8 4 x 8 Left & Right 4 x 8 4 x 8 4 x 8 4 x 8 Left & Right Cove Base Cove Base Corners Cove Base Corner Bullnose Bullnose Corners Bullnose Stair Tread Bullnose Bullnose Bullnose Corners

Actual 5-7/8 x 7-3/4 1 x 5-7/8 5-7/8 x 7-3/4 3-7/8 x 7-3/4 3-7/8 x 7-3/4 3-7/8 x 7-3/4 3-7/8 x 7-3/4 3-7/8 x 7-3/4 3-7/8 x 7-3/4

Thickness 5/16 — 5/16 5/16 5/16 5/16 5/16 5/16 5/16

Cove Base Inside & Outside Cove Base Cove Base Bullnose Left Right Bullnose(Standard, round top) Cove Base Corners Corner - Left Corner - Right Bullnose Corner Bullnose Corner Stair Tread

Wet Dynamic Facial Water Deep Breaking Bond Coefficient Dimensions Range of Warpage Frost Chemical Scratch Absorption Abrasion Strength Strength of Friction Range Thickness (Diagonal) Wedging Resistance Resistance Hardness

ASTM Test Method C373 C1243 C648 C482 DCOF AcuTestsm C499 C499 C485 C502 C1026 C650 Mohs ANSI Requirements 0.5% Max. 175 Max. ≥ 250 lbf ≥ 50psi ± 0.50% 0.040 Max. ± 0.50% ± 0.50% Resistant Unaffected Scale

A Series Polished (PO) <0.10% <150 350-420 lbf >200 psi .31 – .41 ± 0.15% 0.015 ± 0.20% ± 0.30% Resistant Unaffected 5

A Series Unpolished (UPS) <0.10% <150 350-420 lbf >200 psi .50 – .60 ± 0.15% 0.015 ± 0.20% ± 0.30% Resistant Unaffected 6

B Series Polished (PO) <0.10% <150 350-420 lbf >200 psi .31 – .41 ± 0.15% 0.015 ± 0.20% ± 0.30% Resistant Unaffected 5

B Series Unpolished (UPS) <0.10% <150 350-420 lbf >200 psi .50 – .60 ± 0.15% 0.015 ± 0.20% ± 0.30% Resistant Unaffected 6

C Series Polished (PO) <0.10% <150 350-420 lbf >200 psi .31 – .41 ± 0.15% 0.015 ± 0.20% ± 0.30% Resistant Unaffected 5

C Series Unpolished (UPS) <0.10% <150 350-420 lbf >200 psi .50 – .60 ± 0.15% 0.015 ± 0.20% ± 0.30% Resistant Unaffected 6

Cross-Colors LP (PO) <0.10% <150 350-420 lbf >200 psi .31 – .41 ± 0.15% 0.015 ± 0.20% ± 0.30% Resistant Unaffected 5

Cross-Colors LP (UPS) <0.10% <150 350-420 lbf >200 psi .50 – .60 ± 0.15% 0.015 ± 0.20% ± 0.30% Resistant Unaffected 6

Crossdot® (CD) * <0.10% <150 350-420 lbf >200 psi .50 – .60 ± 0.15% N/A ± 0.20% ± 0.30% Resistant Unaffected 6

Cross-Grip® (CGS)† <0.10% <150 350-420 lbf >200 psi NA – NA† ± 0.15% N/A ± 0.20% ± 0.30% Resistant Unaffected 6

Cross-Slate® (CS) <0.10% <150 350-420 lbf >200 psi .50 – .60 ± 0.15% N/A ± 0.20% ± 0.30% Resistant Unaffected 6

Cross-Tread® (CTS)* <0.10% <150 350-420 lbf >200 psi .50 – .60 ± 0.15% N/A ± 0.20% ± 0.30% Resistant Unaffected 6

Product Performance

* The increased real world traction of these types of surfaces cannot be fully realized by any current COF testing methodologies due to their exaggerated facial structure.† Due to the heavily texture surface DCOF value is not able to be measured by testing device. see SCOF

This porcelain tile product is produced with a V1 variation. Differences among pieces from the same production run are minimal. Inspect the product upon delivery and for best results, blend tile from several cartons during installation.

Wet Dynamic COFUnpolished (UPS) .50 – .60 DCOF AcuTest™

Polished (PO) .31 – .42 DCOF AcuTest™

Cross-Slate® .50 – .60* DCOF AcuTest™

Crossdot® .50 – .60* DCOF AcuTest™

Cross-Grip® NA – NA† DCOF AcuTest™

Cross-Tread® .50 – .60* DCOF AcuTest™

* The increased real world traction of these types of surfaces cannot be fully realized by any current DCOF testing methodologies due to their exaggerated facial structure.

† Due to the heavily textured surface DCOF value is not able to be measured by testing device.

Crossville, Inc. • P.O. Box 1168, Crossville, TN 38557 • Phone: 931.484.2110 • Fax: 931.456.2956 • E-Mail: Crossc@CrossvilleInc.com • CrossvilleInc.com

Porcelain Stone®

Cross-Colors®

Cross-Colors B SeriesColor 6 x 6 (cut/bevel) 8 x 8 12 x 12

B100 Greige Patino n n n n

B110 Antico Taupe n n n n

B120 Peach Fresco n n n n

B180 Lapis n n n n

B190 Amethyst n n n n

B200 Primavera n n n n

B210 Seabreeze n n n n

B220 Doeskin n n n n

B230 Zeolite n n n n

B380 Sunflower n n n n

B481 Forest Green n n n n

B580 Oceana n n n n

* Thesecolorsareinventoriedincut/bevel6x6UPSfinishatCrossville®. Allother6x6colorsandfinishesarespecialorder.

Note:Thecut/beveltileiscutfromlargerformattileandtheedgesarebeveledtoprovideafactoryappearance.PleaseallowtwotoeightweeksfordeliverydependingonCrossville’sproductionschedule.

Finishes Data (Solids and Mingles)Cross-Colors A SeriesColor 6 x 6 (cut/bevel) 8 x 8 12 x 12

A215 Empress White* n n n n n n

A233 Sand Bisque* n n l n n l s n n l

A235 Sahara Dune* n n n n n n

A236 Flax n n n n n n

A238 Shetland n n n n n n

A246 Pacific Surf n n n n n n

A260 Pebble* n n n n s n n

A291 Pepper Quartz* n n n n n n

A375 Saffron n n n n n n

A410 Greenbriar n n n n s n n

A485 Rain Forest n n n n n n

A585 Sea Mist* n n l n n l s n n l

A634 Terra Rosata n n l n n l s n n l

A658 Fawn n n n n n n

A660 Rosewood n n n n s n n

A675 Stonehenge* n n l n n l s s s n n l

A740 Nutmeg n n n n n n

A745 Tawny n n l n n l n n l

A750 Brown Tweed* n n l n n l s n n l

A760 Spice Mist* n n n n n n

A790 Burgundy Smoke* n n n n s s s n n

A825 Mercury* n n l n n l s n n l

A830 Atlantic Grey n n n n n n

A850 Graphite* n n l n n l s s n n l

A870 Seal Taupe* n n n n n n

A876 Truffle* n n l n n l n n l

A880 Onyx* n n l n n l s n n l

A890 Ebony n n n n n n

A900 Mica* n n l n n l s s s n n l

EC001 Storm n s

R001 Gray Mingle n s

Cross-Colors C SeriesColor 6 x 6 (cut/bevel) 8 x 8 12 x 12

C310 Bamboo n n n n n n

C360 Maple Sugar n n n n n n

C370 Featherstone n n n n n n

C400 Bayberry n n n n n n

C583 Windsurf n n n n n n

C810 Platinum n n n n n n

Legend

n Unpolished (UPS) n Polished (PO) l Cross-Slate (CS)

s Cross-Tread (CTS) s Crossdot (CD) s Cross-Grip (CGS)

Cross-Colors® – Cross-Colors Unpolished (UPS) and Polished (PO) is recommended for interior floors, walls, countertops, and exterior walls in both residential and commercial environments. Cross-Colors (PO) is not recommended for wet areas where standing water may occur.

Cross-Slate® (CS) – The Cross-Slate finish combines the rustic and textured feel of slate with the through-body color and durability of Porcelain Stone®. Through-body color, unglazed structured surface, and a variety of sizes provide a strong commercial value where enhanced traction is needed for high traffic interior and exterior spaces. Cross-Slate is recommended for interior floors and walls as well as exterior walls and exterior walking surfaces in both residential and commercial environments.

Cross-Tread® (CTS) – Increased slip resistance and ease of maintenance make this tile a suitable choice for wet and greasy floor areas, as well as for exterior walking surfaces. The Cross-Tread surface pattern is eye-catching, making it a great option for transitional areas and for use as an accent tile.

Crossdot® (CD) – The raised-dot pattern, with a “roughened” surface atop each dot, provides increased coefficient of friction. It is suitable for most commercial kitchens, food prep areas, service stations and other back-of-the-house areas, as well as for exterior walking surfaces.

Cross-Grip® (CGS) – Developed in conjunction with restaurant owners, Cross-Grip is a possible solution for those areas where slips and falls are of greatest concern. The patented raised-point texture has earned Cross-Grip the highest possible performance rating in the National Restaurant Association’s testing for slip resistance. It is suitable for areas where grease, food, oil and other residue tend to accumulate.

Crossdot® Cross-Grip® Cross-Tread®

Cross-Sheen® (UPS) Polished (PO) Cross-Slate®

Recommended Uses

Environmentally AwareTrade Organizations

Available

Regular cleaning is the best way to keep Cross-Colors® tile looking good for years to come. Use clean, hot water (combined with a household cleaner for more aggressive cleaning). Rinse thoroughly and dry with a soft cloth. No waxes are needed. More information regarding the care and maintenance of Crossville® products is available at CrossvilleInc.com.

Care and Maintenance

B110 Antico Taupe B230 Zeolite

Cross-Colors® Crossville, Inc. PO Box 1168Crossville, TN38557

Phone 931.484.2110 Fax 931.456.2956E-Mail Crossc@CrossvilleInc.comWeb CrossvilleInc.com

FS

-CC

-17 _R

Cross-Colors® contains a minimum of 4 percent pre-consumer recycled content and is manufactured by Crossville® using processes that recycle nearly 12 million pounds of previously discarded filtrate and fired tile waste. In addition to its own fired waste recycling, Crossville also accepts and recycles reclaimed, previously installed tile through its Tile Take-Back™ Program. For more information, visit CrossvilleInc.com/green.

* EC001 Storm UPS and CTS have 40% pre-consumer recycled content.

Crossville® has earned Green SquaredSM certification from the Tile Council of North America (TCNA) for its entire U.S.-manufactured porcelain product line-up, as well as its manufacturing processes. The company is among the first ever recipients of this certification standard for the tile industry. TCNA developed the Green Squared certification under American National Standards Institute (ANSI) process. The multi-attribute program (ANSI A138.1) scores products in five categories of performance: product characteristics, manufacturing, corporate governance, innovation and end-of-life. Crossville’s certified products and processes received stringent evaluation from Scientific Certification Systems (SCS), the green building industry’s longest standing third-party certifier.

EcoCycle Tile Process™

Green SquaredSM Certified

Our porcelain tiles are available with Hydrotect™. Crossville’s revolutionary invisible coating harnesses the power of light, water, and oxygen to create the best defense against dirt and pollution. Whether indoors or out, floors and walls stay cleaner, providing a superior experience in any space. For complete details check our website at CrossvilleInc.com.

Our WarrantyHydrotect

For over 20 years we have been offering Porcelain tile to commercial customers at National Accounts pricing programs with special discounts. The National Accounts department provides materials forecasting, sales support and samples.

Exterior Cladding

Crossville’s Porcelain Stone® Exterior Cladding Systems are suitable for virtually any conventional masonry application. When used in conjunction with our exterior cladding systems, Crossville’s Porcelain Stone offers clear advantages: decreased construction costs, less site disturbance, low-to-zero maintenance after installation, accelerated construction schedules and greater strength than traditional masonry.

National Accounts

Sample fulfillment & Help Line Samples@CrossvilleInc.com 1 800 221.9093

Loose Samples for Architects & Designers

Loose Tile Samples Sizes may vary depending on product series Max. of 4 large field tile per order

Replacement Chips for PSS Rack Max. of 5, 2 x 2 chips per color

Standard Shipping UPS Ground

Crossville® Sample Express

Crossville Inc. guarantees that its products will meet or exceed the performance specifications outlined in ANSI A137.1-2012 and in the performance data section of the Crossville, Inc. general product catalog. For complete details check our website at CrossvilleInc.com.

Information listed here is subject to change. Please refer to CrossvilleInc.com for the latest, most accurate information.

Our Warranty