Criss Cross Applesauce Instructions Final

8/7/2019 Criss Cross Applesauce Instructions Final

1/10

Criss Cross Apples

1

uce


2/10

Thank you for your

You will need:2 coordinating non-directiSharp ScissorsCoordinating thread

Yardage required using 4

Size 3- yd of fabric 1 aSize 4- yd of fabric 1 aSize 5- yd of fabric 1 aSize 6- 2/3 yd of fabric 1Size 7- 2/3 yd of fabric 1Size 8- 1 yd of fabric 1 anSize 9- 1 yd of fabric 1 an

Size 10-1 yd of fabric 1 aBefore beginning this projthe instructions. Light weiis recommended for this t

*All seam allowances for t

purchase of Criss CrosBy Mia Bella

onal fabrics

wide fabric.

d yd of fabric 2nd yd of fabric 2d yd of fabric 2

and 2/3 yd of fabric 2and 2/3 yd of fabric 2d 1 yd of fabric 2d 1 yd of fabric 2

d 1 yd of fabric 2ect it is recommended that yought cotton fabric or medium wp.

his top are inch.

2

Applesauce

read through all ofight quilting fabric


3/10

3

S e w i n g S t e p sS e w i n g S t e p sS e w i n g S t e p sS e w i n g S t e p s

Step 1- Prepare your pattern

1. Make sure you print your PDF file at 100%In Vista this setting will be Fit to Printable Area

2. Tape your pattern together so that the arrows match up asshown. The paper pieces will not overlap.

3. Once your pattern is taped together cut out the pieces by cuttingalong the colored line that matches the size you want.


4/10

4

Step 2- Cutting fabric

1. Place your pattern pieces on your fabric. The front piece needs tobe placed on the fold. Pieces can be placed upside down if necessary to conserve fabric.

The patternpieces for sizes 3-8will fit side by side.

The back pattern piece for sizes9-10 will not fit side byside and will need tobe placed on the fabricupside down forcutting.

You should have: 2 front pieces cut on the fold (1 from each of your fabric choices) 4 back pieces (2 from each of your fabric choices)


5/10

5

Step 3-Sewing the top

1. Place the back pieces on the front piece printed sides together.Line up the sides and pin them in place.

2. Stitch along the sides. Besure to back stitch at both the

top and the bottom on bothsides.

3. Repeat the last 2 stepsfor your second fabric choice.

4. Lay the sewntogether pieces flat andiron all seams open.


6/10

6

5. Place the twopieces printed sidestogether and pintogether. Leave aspace open along

the bottom front.This is left open forturning.

6. Leave all 4 of the shoulders un-

pinned and un-sewn. Sew all pinnedareas leaving a inseam allowance.Backstitch at everystarting andstopping point.


7/10

7

7. Remove all of thepins and then you will

need to clip around thecurved edges being

careful to not cut thestitches. This will makethe curves turn and iron

flat easier.

9. When you cut the

V you will need tomake a cut in thecenter of the V and acut on either side of the center.

10. Turn the top right side out and iron flat. You can use a pin topull out the curves to ensure that the top will be completely flat.


8/10

8

11. When youiron the opening at the bottom front you will need toturn the opening in inch to matchthe seamallowance.

12. Closing the

shoulders. The back

shoulder piece is wider

than the front shoulderpiece.

The top of the

back shoulder pieceneeds to be turned in inch and ironed flat. (Seepicture)


9/10

9

Insert the frontshoulder piece on the rightinto the back shoulder pieceon the left side.

Pin in place. Repeat forthe other shoulder. Stitch

over the joined shoulder

pieces and backstitch atthe sides. Do not sew

over the pins.


10/10

10

13. The final step isto topstitch around the

entire top. You will need tostitch around the entire

top close to the edges. Thiswill close the bottom front

of the top and give the topa nice finished look. Becareful not to go over the

side.

Congratulations You are now done with the Criss Cross Applesauce Top.Hopefully your little one will love it as much as mine does.

Keep a look out for more patterns from Mia Bella.

Documents

Criss Cross Applesauce Instructions Final