Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
CRISCO is the most modern and dynamicfasteners’ manufacturer in Greece, equippedwith the most modern machinery and mannedwith highly trained personnel. Furthermore,CRISCO is placed among the leading fasteners’ manufacturers of Europe in terms of quality, potentiality and range of products.
Staples and brads of all types, pins, T-nails andround head nails are among the range of products that CRISCO offers to its customersworldwide since 1979.
The top class European raw materials that areused by CRISCO, guarantee the excellent qualityof the products that manufactures under thestrictest European standardization norms.All CRISCO products are compatible with hand,electric and pneumatic tools of almost everymanufacturer in the world.
CRISCO fastening tools have been evaluated bythe international standards organizations GS andTUV. They are manufactured under the qualityand safety norms of the European Union andhave been certified to bare the CE quality mark.Furthermore the manufacturing and managerialoperations are certified by ISO 9002 and ISO14001 of environmental management.
ALL fastening tools of CRISCO are tested beforeleaving the factory. In case any manufacturingor material defect occures, the tools are coveredby a 12 MONTHS limited guarantee as describedin the manual.
FASTENERS& FASTENINGTOOLS
ISO 900214001
MHNEΣ EΓΓYHΣH
MO
N
THS GUARANTEE12
is a registered trade mark ofCRISTALLIDIS S.A. Athens, Greece
STAPLERS - PINNERSBRADDERS - NAILERS
Robust and light-weight, very fast trigger, die-castedaluminum body and magazine, easy safety release.Rubber grip for comfortable handling.
Applications:Upholstery, furniture, coffin making, binding,polyurethane shutters, prefab etc.
Light-weight, very powerful, die-casted aluminumbody and magazine, double actuation valve withspeed regulation (0-1200 cycles/min.) easy safetyrelease.Rubber grip for comfortable handling.
Applications:Upholstery. shipbuilding, prefab etc.
CR 80 / 16N
CR 80 / 16AUT
SPECIFICATIONS
LENGTH 225 mm
HEIGHT 155 mm
WIDTH 45 mm
WEIGHT 0,90 kg
OPERATING PRESSURE 4-7 bar
LOAD 160 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 80
CROWN 13 mm
WIRE DIMENSIONS 0,65 x 0,95 mm
LENGTH MIN.-MAX 4 mm - 16 mm
SPECIFICATIONS
LENGTH 228 mm
HEIGHT 150 mm
WIDTH 45 mm
WEIGHT 1,02 kgs
OPERATING PRESSURE 4-7 bar
LOAD 160 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 80
CROWN 13 mm
WIRE DIMENSIONS 0,65 x 0,95 mm
LENGTH MIN.-MAX 4 mm - 16 mm
STAPLER
STAPLER
5
STAPLERS-PINNERS
BRADDERS-NAILERS
Robust and light-weight, very fast trigger, die-castedaluminum body and magazine, easy safety release,long nose 50mm. Rubber grip for comfortable handling.
Applications:Upholstery, shipbuilding, prefab etc.
Very powerful, compact and light-weight, easy loading, die-casted aluminum body and magazine,nose safety, directional exhaust.Rubber grip for comfortable handling.
Applications:Upholstery, furniture, binding, polyurethanerollers, prefab etc.
SPECIFICATIONS
LENGTH 210 mm
HEIGHT 191 mm
WIDTH 44 mm
WEIGHT 0,92 kg
OPERATING PRESSURE 4-7 bar
LOAD 140 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 80
CROWN 13 mm
WIRE DIMENSIONS 0,65 x 0,95 mm
LENGTH MIN.-MAX 4 mm - 16 mm
SPECIFICATIONS
LENGTH 210 mm
HEIGHT 190 mm
WIDTH 50 mm
WEIGHT 1,05 kgs
OPERATING PRESSURE 4-7 bar
LOAD 140 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 80
CROWN 13 mm
WIRE DIMENSIONS 0,65 x 0,95 mm
LENGTH MIN.-MAX. 6 mm - 25 mm
CR 80 / 16LN50A
CR 80 / 25
STAPLER
STAPLERS-PINNERS
BRADDERS-NAILERS
6
STAPLER
Robust and light-weight, very powerful, very fasttrigger, die-casted aluminum body and magazine,easy safety release.Rubber grip for comfortable handling.
Applications:Upholstery, shoe making, picture frames etc.
Light-weight and very powerful, die-casted aluminumbody and magazine, double actuation valve withspeed regulation (0-1200 cycles/min.), easy safetyrelease.Rubber grip for comfortable handling.
Applications:Upholstery
CR 71 / 16
CR 71 / 16AUT
SPECIFICATIONS
LENGTH 225 mm
HEIGHT 145 mm
WIDTH 45 mm
WEIGHT 0,90 kg
OPERATING PRESSURE 4-7 bar
LOAD 160 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 71
CROWN 9 mm
WIRE DIMENSIONS 0,55 x 0,97 mm
LENGTH MIN.-MAX 6 mm - 16 mm
SPECIFICATIONS
LENGTH 228 mm
HEIGHT 150 mm
WIDTH 45 mm
WEIGHT 1,02 kgs
OPERATING PRESSURE 4-7 bar
LOAD 160 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 71
CROWN 9 mm
WIRE DIMENSIONS 0,55 x 0,97 mm
LENGTH MIN.-MAX. 6 mm - 16 mm
STAPLER
STAPLERS-PINNERS
BRADDERS-NAILERS
7
STAPLER
Robust and light-weight, very powerful, very fasttrigger, die-casted aluminum body and magazine,easy safety release, long nose 50mm.Rubber grip for comfortable handling.
Applications:Upholstery, shipbuilding, prefab etc.
Very powerful, compact and light-weight, easy loading, die-casted aluminum body and magazine,nose safety, directional exhaust.Rubber grip for comfortable handling.
Applications:Upholstery, furniture, binding, polyurethanerollers, prefab etc.
SPECIFICATIONS
LENGTH 210 mm
HEIGHT 191 mm
WIDTH 44 mm
WEIGHT 0,92 kg
OPERATING PRESSURE 4-7 bar
LOAD 140 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 71
CROWN 9 mm
WIRE DIMENSIONS 0,55 x 0,97 mm
LENGTH MIN.-MAX. 6 mm - 16 mm
FASTENER’S SPECIFICATIONS
TYPE R400 (90)
CROWN 5,7 mm
WIRE DIMENSIONS 1,00 x 1,25 mm
LENGTH MIN.-MAX. 10 mm - 25 mm
CR 71 / 16LN50A
CR 90 / 25
SPECIFICATIONS
LENGTH 210 mm
HEIGHT 190 mm
WIDTH 50 mm
WEIGHT 1,05 kgs
OPERATING PRESSURE 4-7 bar
LOAD 140 pcs.CAPACITY
STAPLER
STAPLER
STAPLERS-PINNERS
BRADDERS-NAILERS
8
Very powerful, compact and light-weight, easy loading, die-casted aluminum body and magazine,nose safety, directional exhaust.Rubber grip for comfortable handling.
Applictations:Furniture, curtain-rod, coffin making, sublayers, box making, etc.
Very powerful and light weight with easy top loadingsystem, single and contact firing systems, depth regulation, quick and easy front dejamming, die-casted magnesium body, directional exhaust.Rubber grip for comfortable handling.
Applictations:Furniture, curtain-rod, coffin making, sublayers, box making, etc.
CR 90 / 32B
CR 90 / 40L4
SPECIFICATIONS
LENGTH 346 mm
HEIGHT 248 mm
WIDTH 60 mm
WEIGHT 1,24 kgs
OPERATING PRESSURE 4-7 bar
LOAD 150 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE R400 (90)
CROWN 5,7 mm
WIRE DIMENSIONS 1,00 x 1,25 mm
LENGTH MIN.-MAX. 10 mm - 30 mm
SPECIFICATIONS
LENGTH 276 mm
HEIGHT 253 mm
WIDTH 62 mm
WEIGHT 1,35 kgs
OPERATING PRESSURE 4-7 bar
LOAD 135 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE R400 (90)
CROWN 5,7 mm
WIRE DIMENSIONS 1,00 x 1,25 mm
LENGTH MIN.MAX. 10 mm - 38 mm
STAPLER
STAPLER
STAPLERS-PINNERS
BRADDERS-NAILERS
9
Heavy duty, extra powered and light weight tool.Single and contact firing systems, easy loading, die-casted magnesium body, rapid operation valve,depth regulation.Rubber grip for comfortable handling.
Applications:Furniture, curtain-rod, coffin making, sublayers, box making etc.
Very powerful, light-weight and robust withdie-casted aluminum body and magazine, depthregulation, nose safety and directional exhaust.
Uses two types of staples:(92 and R800) with no need for regulations.
Rubber grip for comfortable handling.
Applications:Furniture, tend making, wood working, shipbuilding,box making, sublayers etc.
SPECIFICATIONS
LENGTH 285 mm
HEIGHT 262 mm
WIDTH 80 mm
WEIGHT 2,26 kgs
OPERATING PRESSURE 4-7 bar
LOAD 120 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE R400 (90)
CROWN 5,7 mm
WIRE DIMENSIONS 1,00 x 1,25 mm
LENGTH MIN.-MAX 10 mm - 38 mm
CR 90 / 40HD
SPECIFICATIONS
LENGTH 240 mm
HEIGHT 200 mm
WIDTH 50 mm
WEIGHT 1,10 kgs
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE R800 92
CROWN 10 mm 8,7 mm
WIRE DIMENSIONS 1,00 x 1,25 mm 1,00 x 1,25 mm
LENGTH MIN.-MAX 10 mm - 25 mm 9 mm - 25 mm
A
A
B
B
STAPLER
STAPLER
STAPLERS-PINNERS
BRADDERS-NAILERS
10
CR 92 / R825
Very powerful, light-weight and robust withdie-casted aluminum body and magazine, depthregulation, nose safety and directional exhaust.
Uses two types of staples:(92 and R800) with no need for regulations.
Rubber grip for comfortable handling.
Applications:Furniture, tent making, wood working, shipbuilding,box making, sublayers, sofa framing, prefabs, aluminium garage doors etc.
Heavy duty, powerful and light weight tool. Singleand contact firing systems, easy loading, die-castedmagnesium body, rapid operation valve, depth regulation.Rubber grip for comfortable handling.
Applications:Furniture, tent making, wood working, shipbuilding,box making, sublayers, sofa framing, prefabs, aluminium garage doors etc.
CR 92 / R838
SPECIFICATIONS
LENGTH 285 mm
HEIGHT 262 mm
WIDTH 80 mm
WEIGHT 2,26 kgs
OPERATING PRESSURE 4-7 bar
LOAD 120 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
ΤYPE 92
CROWN 8,7 mm
WIRE DIMENSIONS 1,00 x 1,25 mm
LENGTH MIN.-MAX. 9 mm - 40 mm
A
B
SPECIFICATIONS
LENGTH 240 mm
HEIGHT 240 mm
WIDTH 60 mm
WEIGHT 1,10 kgs
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE R800 92
CROWN 10 mm 8,7 mm
WIRE DIMENSIONS 1,00 x 1,25 mm 1,00 x 1,25 mm
LENGTH MIN.-MAX. 10 mm - 38 mm 9 mm - 40 mm
A B
STAPLER
STAPLER
STAPLERS-PINNERS
BRADDERS-NAILERS
11
CR 92 / 40HD
Very powerful, light weight, single and contactfiring systems, quick and easy top loading, die-casted magnesium body, quick and easyfront dejamming system.Rubber grip for comfortable handling.
Applications:Sofa framing, box making, roofs, casing, pallets,spools and reels, layers, prefabs, etc.
Very powerful, light weight, single and contactfiring systems, quick and easy top loading, die-casted magnesium body, quick and easyfront dejamming system, depth regulation and directional exhaust. Uses two kinds of fasteners:staples V800 and T-nails with no change of parts.Rubber grip for comfortable handling.
Applications:Sofa framing, box making, roofs, casing, pallets,spools and reels, layers, prefabs, etc.
SPECIFICATIONS
LENGTH 384 mm
HEIGHT 285 mm
WIDTH 91 mm
WEIGHT 2,15 kgs
OPERATING PRESSURE 4-7 bar
LOAD 150 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE V800
CROWN 10,8 mm
WIRE DIMENSIONS 1,40 x 1,60 mm
LENGTH MIN.-MAX. 25 mm - 50 mm
CR G50H5
CR G/ NT64C
SPECIFICATIONS
LENGTH 368 mm
HEIGHT 298 mm
WIDTH 83 mm
WEIGHT 2,15 kgs
OPERATING PRESSURE 4-7 bar
LOAD 160 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE V800 NT
CROWN 10,8 mm 6,3 mm
WIRE DIMENSIONS 1,40 x 1,60 mm 1,90 x 2,20 mm
LENGTH MIN.-MAX. 25 mm - 63 mm 32 mm - 63 mm
A B
A
B
STAPLER
STAPLER & NAILER
STAPLERS-PINNERS
BRADDERS-NAILERS
12
Very powerful, robust and light weight, quick andeasy loading, die-casted aluminum body andmagazine, quick and easy front dejamming system, ergonomic design for continuous use,low air consumption, directional exhaust. Rubber grip for comfortable handling.
Applications:Items connections, fastening insulating materials onroofs, nailing canadian tiles,fastening cartons in pallets etc.
Robust, powerful and light weight, easy exteriorlength regulation of pin, die-casted aluminium bodyand magazine, easy safety release, slim nose.Rubber grip for comfortable handling.
Applications:Furniture, box manufacturing, shipbuilding, woodentoys etc.
CR P40
CR 64 / 12 - 22
SPECIFICATIONS
LENGTH 360 mm
HEIGHT 270 mm
WIDTH 77 mm
WEIGHT 2,30 kgs
OPERATING PRESSURE 4,5-7,5 bar
LOAD 140 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE P
CROWN 26,5 mm
WIRE DIMENSIONS 1,40 x 1,60 mm
LENGTH MIN.-MAX. 12 mm - 38 mm
SPECIFICATIONS
LENGTH 228 mm
HEIGHT 182 mm
WIDTH 45 mm
WEIGHT 1,00 kg
OPERATING PRESSURE 4-6 bar
LOAD 200 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 6 (64)
STEM DIMENSIONS Ø 0,64 mm
LENGTH 12 - 15 - 18
20 - 22 mm
STAPLER
PINNER
STAPLERS-PINNERS
BRADDERS-NAILERS
13
Robust, powerful and light weight, die-castedaluminum body and magazine, easy safety release,slim nose. Uses headless (type 6) and with head(type CT6) pins without any part’s change.Rubber grip for comfortable handling.
Applications:Furniture, box manufacturing, shipbuilding, woodentoys etc.
New design, smaller dimensions, light weight. Thisrobust tool brings a new patented magazine, whichprovides an excellent guiding without jamming. Veryslim nose and special assembly which leaves the surface flawless. Capability of using headless (type6) and with head (type CT6) pins without any part’schange.Rubber grip for comfortable handling.
ApplicationsFurniture, box manufacturing, shipbuilding, woodentoys etc.
CR P64 / 35 SCT
CR P64 / 50 SCT
SPECIFICATIONS
LENGTH 202 mm
HEIGHT 188 mm
WIDTH 37 mm
WEIGHT 0,99 kg
OPERATING PRESSURE 4-6 bar
LOAD 100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 6 (64) CT6
STEM DIMENSIONS Ø 0,64 mm 0,54 x 0,75 mm
HEAD DIMENSIONS - 0,90 x 0,75 mm
LENGTH 12-15-18-20-22-25-30-35 mm
A B
A
B
SPECIFICATIONS
LENGTH 202 mm
HEIGHT 221 mm
WIDTH 37 mm
WEIGHT 1,21 kgs
OPERATING PRESSURE 4-6 bar
LOAD 100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 6 (64) CT6
STEM DIMENSIONS Ø 0,64 mm 0,54 x 0,75 mm
HEAD DIMENSIONS - 0,90 x 0,75 mm
LENGTH 12-15-18-20-22-25-30-35-40-45-50 mm
A B
A
B
PINNER
PINNER
STAPLERS-PINNERS
BRADDERS-NAILERS
14
Robust, powerful and light weight, die-castedaluminum body and magazine, easy safety release,slim nose. Uses headless (type 8) and with head(type MB) pins without any part’s change.Rubber grip for comfortable handling.
Applications:Furniture, box manufacturing, shipbuilding, woodentoys etc.
Capability of using both headless (type I) and withhead (type 12) brads, easy side loading, powerfulwith small volume and weight, slim nose, die-casted aluminum body and cartridge.Rubber grip for comfortable handling.
Applications:Furniture, box manufacturing, coffin making, shipbuilding, wooden toys, upholstery etc.
CR MB - 8 / 40
CR GN - I / 30
SPECIFICATIONS
LENGTH 225 mm
HEIGHT 200 mm
WIDTH 42 mm
WEIGHT 1,00 kg
OPERATING PRESSURE 4-6 bar
LOAD 200 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 8 ΜΒ
STEM DIMENSIONS Ø 0,82 mm 0,90 x 0,70 mm
HEAD DIMENSIONS - 1,50 x 0,70 mm
LENGTH 15-18-20-22-25-30-35-40 mm
A B
SPECIFICATIONS
LENGTH 240 mm
HEIGHT 200 mm
WIDTH 55 mm
WEIGHT 1,10 kgs
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE Ι 12
STEM DIMENSIONS 0,95 x 1,25 mm 1,00 x 1,25 mm
HEAD DIMENSIONS - 1,00 x 2,00 mm
LENGTH 15 mm - 30 mm 11 mm - 30 mm
A B
A
B
A
B
PINNER
BRADDER
STAPLERS-PINNERS
BRADDERS-NAILERS
15
Powerful, light weight, quick and easy side loadingquick and easy front dejamming, single and contactfiring systems, depth regulation, die-casted magnesium body, directional exhaust.Rubber grip for comfortable handling.
Applications:Furniture, box manufacturing, coffin making, shipbuilding,wooden toys, picture frame, shoe making, brush making, etc.
Powerful, light weight, quick and easy side loading,quick and easy front dejamming, single and contactfiring systems, depth regulation, die-casted magnesium body, directional exhaust.Rubber grip for comfortable handling.
Applications:Furniture, box manufacturing, shipbuilding, woodentoys, picture frame, shoe making, brush making,rabote, etc.
SPECIFICATIONS
LENGTH 242 mm
HEIGHT 218 mm
WIDTH 60 mm
WEIGHT 1,08 kgs
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 12
STEM DIMENSIONS 1,00 x 1,25 mm
HEAD DIMENSIONS 1,00 x 2,00 mm
LENGTH MIN.-MAX. 11 mm - 30 mm
SPECIFICATIONS
LENGTH 247 mm
HEIGHT 251 mm
WIDTH 60 mm
WEIGHT 1,24 kgs
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 12
STEM DIMENSIONS 1,00 x 1,25 mm
HEAD DIMENSIONS 1,00 x 2,00 mm
LENGTH MIN.-MAX 11 mm - 57 mm
CR 12 / 32S2
CR 12 / 57S2
BRADDER
BRADDER
STAPLERS-PINNERS
BRADDERS-NAILERS
16
Light weight, small volume yet robust and powerful,quick and easy side loading, quick and easy front dejamming, single and contact firing systems, adjustable depth control, die-casted aluminum bodyand cartidge, directional exhaust.Rubber grip for comfortable handling.
Applications:Furniture, box manufacturing, shipbuilding, woodentoys, picture frame, shoe making, brush making,rabote, bamboo, kitchens etc.
Robust, very powerful and light weight, easy loading,quick and easy front dejamming, single and contact firing systems, adjustable depth control, die-castedmagnesium body, directional exhaust.Rubber grip for comfortable handling.
Applications:Furniture, box manufacturing, shipbuilding,wooden toys, picture frame, shoe making, brushmaking, rabote, bamboo, kitchens etc.
CR 14 / 50 L
CR 14 / 64 P5
SPECIFICATIONS
LENGTH 286 mm
HEIGHT 248 mm
WIDTH 70 mm
WEIGHT 1,54 kgs
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 14
STEM DIMENSIONS 1,40 x 1,60 mm
HEAD DIMENSIONS 1,40 x 2,80 mm
LENGTH MIN.-MAX. 20 mm - 50 mm
SPECIFICATIONS
LENGTH 317 mm
HEIGHT 281 mm
WIDTH 84 mm
WEIGHT 1,80 kgs
OPERATING PRESSURE 5,0-7,5 bar
LOAD 100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 14
STEM DIMENSIONS 1,40 x 1,60 mm
HEAD DIMENSIONS 1,40 x 2,80 mm
LENGTH MIN.-MAX. 20 mm - 64 mm
BRADDER
BRADDER
STAPLERS-PINNERS
BRADDERS-NAILERS
17
Light weight, compact and very powerful, quick easyside loading and front dejamming, single and contactfiring systems, adjustable depth control, die-castedmagnesium body and cartridge, directional exhaust.Rubber grip for comfortable handling.Specially design for use of two materials: Small bradwith head type 14 simple (steel) from 20mm until55mm. Steely brad type FST from 15mm until50mm, for special nailing of wood, floating screedor aluminium in aluminium, metal, concrete andother hard materials.
Applications:Furniture, box manufacturing, shipbuilding, wooden toys,picture frame, shoe making, brush making, rabote, bamboo,kitchens, casing, parquetry, wall-base, window sill, etc.
Very powerful, robust, fast, narrow nose for accuratenailing, sequential fastening system, easy side loading,die-casted magnesium body and cartridge.Rubber grip for comfortable handling.
Specially design for use of two materials: T-nail typeNT simple (steel) from 32mm until 63mm. Steelynail type NTHC from 15mm until 64mm, for specialnailing of wood, floating screed or aluminium in alu-minium, metal, concrete and other hard materials.
Applications:Sofa framing, upholstery, box making, roofs, spoolsand reels, prefab, parquetry, wall-base, etc.
CR F1.8 / 57C
CR NT64F
SPECIFICATIONS
LENGTH 305 mm
HEIGHT 290 mm
WIDTH 67 mm
WEIGHT 1,80 kgs
OPERATING PRESSURE 4,5-7,0 bar
LOAD 100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 14 FST
STEM DIMENSIONS 1,40 x 1,60 mm Ø 1,80 mm
HEAD DIMENSIONS 1,40 x 2,80 mm 1,80 x 3,00 mm
LENGTH MIN.-MAX. 20 mm - 55 mm 15 mm - 50 mm
A B
A
B
SPECIFICATIONS
LENGTH 305 mm
HEIGHT 305 mm
WIDTH 92 mm
WEIGHT 2,50 kgs
OPERATING PRESSURE 5,0-7,5 bar
LOAD 100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE NTHC NT
STEM DIMENSIONS Ø 2,20 1,90 x 2,20 mm
HEAD DIMENSIONS 2,20 x 7,00 mm 2,00 x 6,00 mm
LENGTH MIN.-MAX. 15 mm - 64 mm 32 mm - 63 mm
A B
A
B
BRADDER
T-NAILER
18
STAPLERS-PINNERS
BRADDERS-NAILERS
Very powerful, robust and light weight, quick and easyloading, die-casted aluminium body and magazine,quick and easy front dejamming system, ergonomic de-sign for continuous use, low air consumption, direc-tional exhaust.Rubber grip for comfortable handling.
Applications:Items connections, kitchen doors, furniture, pictureframes, painting panels, etc.
CR MINI - CF16S
CR CF15S
SPECIFICATIONS
LENGTH 360 mm
HEIGHT 270 mm
WIDTH 77 mm
WEIGHT 2,30 kgs
OPERATING PRESSURE 4,5-7,5 bar
LOAD 80 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
ΤΥPE MiniCF
BLADE WIDTH 12,7 mm
LENGTH 6-8-9-12-15mm
SPECIFICATIONS
LENGTH 300 mm
HEIGHT 270 mm
WIDTH 92 mm
WEIGHT 2,60 kgs
OPERATING PRESSURE 5-7,5 bar
LOAD 80 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
ΤYPE CF
BLADE WIDTH 25,4 mm
LENGTH 8-10-13-15 mm
CORRUGATED NAILER
CORRUGATED NAILER
19
STAPLERS-PINNERS
BRADDERS-NAILERS
Robust, very powerful and light weight, easy loading,die-casted magnesium body, easy front dejammingsystem, ergonomic design,slim nose for accuratenailing, directional exhaust.Rubber grip for comfortable handling.
Applications:Items connections, prefab panels, casing, furniture, etc.
Small sized, light weight yet very powerful tool witheasy side loading, height regulation in the cartridge,depth regulation, die-casted magnesium body, directonal exhaust.Rubber grip for comfortable handling
Applications:Box making, woodworking, pallets, roofs, prefab, etc.
Heavy duty, light weight yet very powerful, easyloading, height regulation in the cartridge, depth regulation, die-casted magnesium body, directionalexhaust.Rubber grip for comfortable handling.
Applications:Box making, woodworking, pallets, roofs, prefab,building, etc.
CR C65
CR C75
SPECIFICATIONS
LENGTH 300 mm
HEIGHT 330 mm
WIDTH 130 mm
WEIGHT 2,45 kgs
OPERATING PRESSURE 5,0-7,0 bar
LOAD 200 -300CAPACITY pcs./coil
FASTENER’S SPECIFICATIONS
TYPE RBW-T4, RBW
STEM DIMENSIONS Ø 2,1 - 2,5 mm
HEAD DIMENSIONS Ø 4,0 - 6,0 mm
LENGTH MIN.-MAX. 30 mm - 60 mm
SPECIFICATIONS
LENGTH 340 mm
HEIGHT 350 mm
WIDTH 130 mm
WEIGHT 3,40 kgs
OPERATING PRESSURE 5,0-7,5 bar
LOAD 200 - 300CAPACITY pcs./coil
FASTENER’S SPECIFICATIONS
TYPE RBW
STEM DIMENSIONS Ø 2,1 - 2,5 mm
HEAD DIMENSIONS Ø 5,0 - 6,0 mm
LENGTH MIN.-MAX. 50 mm - 70 mm
ROUND HEAD NAILER
ROUND HEAD NAILER
STAPLERS-PINNERS
BRADDERS-NAILERS
20
Heavy duty, extra powered and relatively lightweight tool with side loading, height regulationin the cartridge, depth regulation, die-castedmagnesium body and directional exhaust.Rubber grip for comfortable handling.
Applications:Box making, woodworking, pallets, roofs, prefab,building, etc.
Huge power and light weight, die-casted magnesium body, oversized design of tunic formore force, ergonomic design for continuous use,collateral handhold for easy grip, slim nose for accurate nailing, quick & easy supply of material.
Applications:Structural frames, frames and residences' roofs,floors - roofs sublayers, pallets - spools and reels,wooden boxes, platforms construction, prefabrication- moulds, etc.
CR C90
CR S-130G
SPECIFICATIONS
LENGTH 340 mm
HEIGHT 365 mm
WIDTH 130 mm
WEIGHT 3,40 kgs
OPERATING PRESSURE 5,0-7,5 bar
LOAD 200 - 300CAPACITY pcs./coil
FASTENER’S SPECIFICATIONS
TYPE RBW
STEM DIMENSIONS Ø 2,50 - 3,10 mm
HEAD DIMENSIONS Ø 6,0 - 7,0 mm
LENGTH MIN.-MAX. 50 mm - 90 mm
SPECIFICATIONS
LENGTH 580 mm
HEIGHT 440 mm
WIDTH 159 mm
WEIGHT 5,20 kgs
OPERATING PRESSURE 5,0-7,5 bar
LOAD 56 - 70 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE LSN
STEM DIMENSIONS Ø 3,30 - 4,20 mm
HEAD DIMENSIONS Ø 9 mm
LENGTH MIN.-MAX. 100 mm - 130 mm
ROUND HEAD NAILER
ROUND HEAD NAILER
STAPLERS-PINNERS
BRADDERS-NAILERS
21
Huge power and light weight, die-casted magnesiumbody, oversized design of tunic for more force, ergonomic design for continuous use, collateral handhold for easy grip, slim nose for accurate nailing,quick & easy supply of material.
Applications:Structural frames, frames and residences' roofs,floors - roofs sublayers, pallets - spools and reels,wooden boxes, platforms construction, prefabrication- moulds, etc.
Special tool for holding soft or frail materials (glasswool, rockwool, heraklith, etc) that are usedmainly for insulations of roofs and walls. It uses also aspecial rosette of 25mm, in order to retain robustlythe frail material without destroying it.
Applications:Fastening insulating materials on roofs, prefabricatedwalls, etc.
SPECIFICATIONS
LENGTH 588 mm
HEIGHT 505 mm
WIDTH 159 mm
WEIGHT 6,70 kgs
OPERATING PRESSURE 5,0-7,5 bar
LOAD44 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
ΤYPE LSN
STEM DIMENSIONS Ø 3,80 - 4,60 mm
HEAD DIMENSIONS Ø 9 mm
LENGTH MIN.-MAX. 100 mm - 160 mm
CR S-160G
CR C-50WPC
A
B
SPECIFICATIONS
LENGTH 240 mm
HEIGHT 239 mm
WIDTH 160 mm
WEIGHT 2,8 kgs
OPERATING PRESSURE 5,0-7,0 bar
LOAD 200 -300CAPACITY pcs./coil
ROSETTE CAPACITY 100 pcs.
FASTENER’S SPECIFICATIONS
ΤYPE RBW-T4 PC 25
STEM DIMENSIONS Ø 2,1 - 2,5 mm
HEAD DIMENSIONS Ø 4 mm
LENGTH MIN.-MAX. 20 mm - 50 mm
A B
DIAMETER25 mm
ROUND HEAD NAILER
STAPLERS-PINNERS
BRADDERS-NAILERS
22
SPECIAL NAILER FOR INSULATING MATERIALS
Compact and powerful tool for planting loose nailsfrom 30 mm up to 180 mm height. Fast, jamlessand robust with high efficiency. Incorporated magnetto the nose for nail holding. Auto-start by simplepressure without the use of trigger.
Applications:Wooden construction, prefab, roofs, pallets, shipbuilding etc.
CR P300
SPECIFICATIONS
LENGTH 120 mm
HEIGHT 121 mm
WEIGHT 1,10 kgs
OPERATING PRESSURE 5 - 8 bar
FASTENER’S SPECIFICATIONS
ΤYPE COMMON NAIL
STEM DIMENSIONS Ø 2,10 - 4,00 mm
HEAD DIMENSIONS Ø 5,00 - 9,00 mm
LENGTH MIN.-MAX. 30 mm - 180 mm
LOOSE-NAIL’S NAILER
STAPLERS-PINNERS
BRADDERS-NAILERS
23
FRAME ASSEMBLY
Compact construction, powerful and easy to use, forperfect joints at 90o, 120o, 135o even curves. Easyto regulate power, hands-free operation by foot-pedal.
Applications: Picture frames, cabinet doors, frames assembly, etc.
Very powerful, light-weight and robust with die-castedaluminum body and magazine. Adjustable depth control and directional exhaust. Accompanied by two90o corner stabilization accessories with depth regulation. Indispensable for butt or mitre joints.
Applications:Picture frames, cabinet doors, door and windowframes, furniture, toys, DIY, etc.
SPECIFICATIONS
LENGTH 550 mm
HEIGHT 430 mm
WIDTH 300 mm
WEIGHT 32,50 kgs
OPERATING PRESSURE 4-7 bar
LOAD 250 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
ΤYPE VEH
CROWN 10,8 mm
LENGTH 7-10-12-15 mm
SPECIFICATIONS
LENGTH 240 mm
HEIGHT 200 mm
WIDTH 50 mm
WEIGHT 1,30 kgs
OPERATING PRESSURE 4-7 bar
LOAD 300 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
ΤΥPE VEH
CROWN 10,8 mm
LENGTH 7-10-12-15 mm
CR V15 - EC01
CR V15 - EH
FRAME UNDERPINNER
V-NAILER
FRAME ASSEMBLY
26
Light-weight, fast and accurate in use, die-castedaluminum body and magazine, directional exhaust.
Applications:Picture frame, decoration.
Light-weight, easy and accurate in use, no need ofcompressed air, uses both wedges and brads, according to the application.
Applications:Picture frame, decoration.
CR W5 / 15
CR P - 3515 / F18
SPECIFICATIONS
LENGTH 225 mm
HEIGHT 161 mm
WIDTH 48 mm
WEIGHT 0,86 kg
OPERATING PRESSURE 4-7 bar
LOAD 300 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
ΤYPE W5
CROWN 5 mm
THICKNESS 0,3 mm
LENGTH 15 mm
SPECIFICATIONS
LENGTH 173 mm
HEIGHT 150 mm
WIDTH 30 mm
WEIGHT 0,90 kg
LOAD 50 pcs.CAPACITYBRADS
LOAD 150 pcs.CAPACITYWEDGES
FASTENER’S SPECIFICATIONS
ΤYPE 12 W5
THICKNESS 1,00 χ 1,25 mm 0,3 mm
WIDTH 1,00 χ 2,00 mm 5 mm
LENGTH 16 mm 15 mm
A B
A
B
WEDGE NAILER
MANUAL WEDGE ANDBRAD NAILER
FRAME ASSEMBLY
27
BEDDING, CLINCHING-PACKAGING
Easy to use and light-weight, with fast valve and staple capacity up to 25 mm, die-casted aluminumbody and magazine, satisfactory jaw-opening.
Applications:Bedding, packaging of food, transport, textiles, plastics, etc.
Light-weight and fast in use, accurate and powerfulclinching, with long magazine for high productivity.
Applications:Spring mattresses, cages, wire baskets, no-sags, wireconnection from 3 mm to 5 mm.
SPECIFICATIONS
LENGTH 362 mm
HEIGHT 302 mm
WIDTH 63 mm
WEIGHT 2,10 kgs
OPERATING PRESSURE 5-7 bar
LOAD 250 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 779
CROWN 12,5 mm
WIRE DIMENSIONS 0,70 x 1,25 mm
LENGTH MIN.-MAX. 12 mm - 25 mm
SPECIFICATIONS
LENGTH 450 mm
HEIGHT 200 mm
WIDTH 95 mm
WEIGHT 3,00 kgs
OPERATING PRESSURE 5-7 bar
LOAD 50 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
ΤYPE CL
CROWN 7,9 mm
WIDTH 19 mm & 22 mm
LENGTH 12,3-14,1-15,5 mm
CR 779 / 25 SJ
CR MR 66
BEDDING PLIER
CLINCH CLIP
BEDDING
CLINCHING - PACKAGING
30
Very light-weight, with a fast valve for high productivity, robust and precise with no operatingproblems. Die-casted aluminum body with soft, anti-slip rubber grip for comfortable handling.
Applications:Spring mattresses, bedding, furniture and car upholstery, packing, cages, flowers decorations, etc.
Very light-weight, with a fast valve for high productivity, robust and precise with no operatingproblems. Die-casted aluminum body with soft, anti-slip rubber grip for comfortable handling.
Applications:Spring mattresses, bedding, furniture and car upholstery,packing, cages, flowers decorations, etc.
CR SC 7
CR SC 7C
C-RING PLIER
C-RING PLIER
BEDDING
CLINCHING - PACKAGING
31
SPECIFICATIONS
LENGTH 374 mm
HEIGHT 187 mm
WIDTH 87 mm
WEIGHT 1,45 kgs
NOSE LENGTH 45 mm
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
CLOSURE SIZES 8,9-10,7 mm
FASTENER’S SPECIFICATIONS
ΤΥPE C1524
CROWN 23,9 mm
WIRE DIMENSIONS 1,8 mm
LENGTH 12 mm
SPECIFICATIONS
LENGTH 374 mm
HEIGHT 187 mm
WIDTH 87 mm
WEIGHT 1,45 kgs
NOSE LENGTH 45 mm
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
CLOSURE SIZES 4,8-8,7 mm
FASTENER’S SPECIFICATIONS
TYPE C1524
CROWN 23,9 mm
WIRE DIMENSIONS 1,8 mm
LENGTH 12 mm
Very light-weight, with a fast valve for high productivity, robust and precise with no operatingproblems. Die-casted aluminum body with soft, anti-slip rubber grip for comfortable handling.
Applications:Spring mattresses, bedding, furniture and car upholstery, packing, cages, flowers decorations, etc.
Very light-weight, with a fast valve for high productivity, robust and precise with no operatingproblems. Die-casted aluminum body with soft, anti-slip rubber grip for comfortable handling.
Applications:Spring mattresses, bedding, furniture and car upholstery, packing, cages, flowers decorations, etc.
CR SC 7E MN
CR SC 77XE LN
C-RING PLIER
C-RING PLIER
BEDDING
CLINCHING - PACKAGING
32
SPECIFICATIONS
LENGTH 415 mm
HEIGHT 215 mm
WIDTH 83 mm
WEIGHT 1,65 kgs
NOSE LENGTH 87 mm
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
CLOSURE SIZES 7,9-11 mm
FASTENER’S SPECIFICATIONS
ΤYPE C1524
CROWN 23,9 mm
WIRE DIMENSIONS 1,8 mm
LENGTH 12 mm
SPECIFICATIONS
LENGTH 389 mm
HEIGHT 187 mm
WIDTH 87 mm
WEIGHT 1,60 kgs
NOSE LENGTH 61 mm
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
CLOSURE SIZES 8,9-10,7 mm
FASTENER’S SPECIFICATIONS
ΤYPE C1524
CROWN 23,9 mm
WIRE DIMENSIONS 1,8 mm
LENGTH 12 mm
Very light-weight, with a fast valve for high productivity, robust and precise with no operatingproblems. Die-casted aluminum body with soft, anti-slip rubber grip for comfortable handling.
Applications:Spring mattresses, bedding, furniture and car upholstery, packing, cages, flowers decorations, etc.
Very light-weight, with a fast valve for high productivity,robust and precise with no operating problems. Die-casted aluminum body with soft, anti-slip rubbergrip for comfortable handling.
Applications:Spring mattresses, bedding, furniture and car upholstery, packing, cages, flowers decorations, etc.
CR SC 720
CR SC 73462
C-RING PLIER
C-RING PLIER
BEDDING
CLINCHING - PACKAGING
33
SPECIFICATIONS
LENGTH 374 mm
HEIGHT 187 mm
WIDTH 87 mm
WEIGHT 1,45 kgs
NOSE LENGTH 45 mm
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
RING CLOSURE 1,6-3,2 mm
FASTENER’S SPECIFICATIONS
ΤYPE C1610
CROWN 11,8 mm
WIRE DIMENSIONS 1,6 mm
LENGTH 6,6 mm
SPECIFICATIONS
LENGTH 389 mm
HEIGHT 187 mm
WIDTH 87 mm
WEIGHT 1,45 kgs
NOSE LENGTH 61 mm
OPERATING PRESSURE 4-7 bar
LOAD 100 pcs.CAPACITY
CLOSURE SIZES 6,8 mm
FASTENER’S SPECIFICATIONS
TYPE C1620 G
CROWN 20 mm
WIRE DIMENSIONS 1,6 mm
LENGTH 10,4 mm
CARTON CLOSERS
Easy to use and light-weight, with fast valve and staple capacity up to 16 mm, die-casted aluminumbody and magazine, satisfactory jaw-opening.
Applications:Carton - box closing, Packaging of food, transport,textiles, plastics, etc.
Light weight and powerful machine for carton closing with staples.Pneumatic operation, uses two different lengths (15 mm, 18 mm) with depth and staple tighteningregulation.
Applications:Wherever carton closing with staples is required.
SPECIFICATIONS
LENGTH 362 mm
HEIGHT 302 mm
WIDTH 63 mm
WEIGHT 2,10 kgs
OPERATING PRESSURE 5-7 bar
LOAD 250 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
TYPE 779
CROWN 12,5 mm
WIRE DIMENSIONS 0,70 x 1,25 mm
LENGTH MIN.-MAX. 10mm - 16mm
SPECIFICATIONS
LENGTH 322 mm
HEIGHT 220 mm
WIDTH 114 mm
WEIGHT 1,92 kgs
OPERATING PRESSURE 5-7 bar
LOAD100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
ΤYPE 32
CROWN 32 mm
WIRE DIMENSIONS 0,90 x 1,90 mm
LENGTH MIN.-MAX. 15 mm - 18 mm
CR 779 / 16 BJ
CR ADB 32 / 19
CARTON PLIER
CARTON CLOSER
36
CARTON CLOSERS
The lighter, powerful and easy to use manual cartoncloser. Uses two lengths of staples, 15 and 18 mm, withadjustable depth and staple closure.
Applications:Wherever carton closing with staples is required.
Light weight and powerful machine for carton closingwith staples.Pneumatic operation, uses two different lengths (15 mm, 18 mm) with depth and staple tighteningregulation.
Applications:Wherever carton closing with staples is required.
CR HCC 35 /18
CR ADB 35 /19
SPECIFICATIONS
LENGTH 460 mm
HEIGHT 310 mm
WIDTH 102 mm
WEIGHT 1,67 kgs
LOAD100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
ΤYPE 35
CROWN 35 mm
WIRE DIMENSIONS 0,90 x 2,30 mm
LENGTH MIN.-MAX. 15 mm - 18 mm
SPECIFICATIONS
LENGTH 322 mm
HEIGHT 220 mm
WIDTH 114 mm
WEIGHT 1,92 kgs
OPERATING PRESSURE 5-7 bar
LOAD100 pcs.CAPACITY
FASTENER’S SPECIFICATIONS
ΤYPE 35
CROWN 35 mm
WIRE DIMENSIONS 0,90 x 2,30 mm
LENGTH MIN.-MAX. 15 mm - 18 mm
MANUAL CARTON CLOSER
CARTON CLOSER
37
CARTON CLOSERS
SPECIAL TOOLS
Very practical, light and easy to use tool that relieves the operator from trouble and tire whileremoving staples and decorative nails during re-upholstering works.Five times faster and fatigue - free operation, incomparison with any other method, without damaging the furniture. Delivered with two chisels, one for staples and one for decorative nailremoval.
Very light and easy to use, with ergonomic handle,integrates a clever “pliers” system that clamps thestaple and removes it easily.
SPECIFICATIONS
LENGTH 240 mm
BODY DIAMETER Ø35 mm
WEIGHT 0,32 kg
OPERATING PRESSURE 5-7 bar
SPECIFICATIONS
LENGTH 176 mm
WIDTH 32 mm
WEIGHT 0,11 kg
CR FRM 1106
CR HSR 850
Robust and speedy air mallet, accompanied with 6 different hardness and material heads, relative to thetype of use. Auto-start by simple pressure without theuse of trigger.
Applications:Tents’ stripes fixing, auto body repair, wood working,machines assembly etc.
SPECIFICATIONS
LENGTH 99 mm
HEIGHT 99 mm
WEIGHT 1,00 kg
OPERATING PRESSURE 5-8 bar
CR PAH 1
SHAPE 1
SHAPE 2
VERY
SOFT
SOFT HARD
MEDIUM ALUMINIUM STEEL
STAPLE & DECORATIVE NAILREMOVER
MANUAL STAPLE REMOVER
AIR - MALLET
SPECIAL TOOLS
40
ELECTRICAL FASTENING TOOLS
Amateur electric fastening tool for staples up to16mm. Powerful, easy loading, general switch, double insulation, nose safety.
Safety approvals CE/GS/UL.
Applications:Upholstery, furniture, woodworking, binding,polyurethane rollers, prefab etc.
Professional electric fastening tool for staples up to25 mm. Robust and very powerful with easy loading,general switch, double insulation, nose safety anddepth regulation. Rubber grip for comfortable handling.
Safety approvals CE/GS/UL.
Applications:Upholstery, furniture, woodworking, binding,polyurethane rollers, prefab etc.
SPECIFICATIONS
LENGTH 215 mm
HEIGHT 195 mm
WIDTH 68 mm
WEIGHT 1,00 kg
VOLTAGE 220 V
OPERATING 30 shots/minSPEED
FASTENER’S SPECIFICATIONS
TYPE 80
CROWN 13 mm
WIRE DIMENSIONS 0,65 x 0,95 mm
LENGTH MIN.-MAX. 6 mm - 16 mm
SPECIFICATIONS
LENGTH 280 mm
HEIGHT 240 mm
WIDTH 68 mm
WEIGHT 1,75 kgs
VOLTAGE 220 V
OPERATING 30 shots/minSPEED
FASTENER’S SPECIFICATIONS
ΤYPE 80
CROWN 13 mm
WIRE DIMENSIONS 0,65 x 0,95 mm
LENGTH MIN.-MAX 10 mm - 25 mm
CR 80 / 16EL
CR 80 / 25EL
STAPLER
STAPLER
42
ELECTRICAL FASTENING TOOLS
Professional electric fastening tool for brads up to35 mm length. Robust and very powerful with easyside loading, general switch, double insulation, nosesafety and depth regulation.Rubber grip for comfortable handling.
Safety approvals CE/GS/UL.
Applications:Furniture, box making, shipbuilding, wooden toys, picture frames, shoe making, brush making, rabote, etc.
Professional electric fastening tool for both staples upto 30 mm and brads up to 35 mm length. Robust andvery powerful with easy side loading, general switch,double insulation, nose safety and depth regulation.Rubber grip for comfortable handling.
Safety approvals CE/GS/UL.
Applications:Furniture, box making, shipbuilding, wooden toys, picture frames, shoe making, brush making, rabote, etc.
CR 12 / 35EL
CR 90-12/35EL Combi
SPECIFICATIONS
LENGTH 280 mm
HEIGHT 240 mm
WIDTH 68 mm
WEIGHT 1,75 kgs
VOLTAGE 220 V
OPERATING 30 shots/minSPEED
FASTENER’S SPECIFICATIONS
TYPE 12
CROWN 1,00 x 1,25 mm
WIRE DIMENSIONS 1,00 x 2,00 mm
LENGTH MIN.-MAX 11 mm - 35 mm
SPECIFICATIONS
LENGTH 280 mm
HEIGHT 240 mm
WIDTH 68 mm
WEIGHT 1,85 kgs
VOLTAGE 220 V
OPERATING 30 shots/minSPEED
FASTENER’S SPECIFICATIONS
ΤYPE R400 (90) 12
CROWN/HEAD 5,7 mm 1,00 x 2,00 mm
WIRE DIMENSIONS 1,00 x 1,25 mm 1,00 x 1,25 mm
LENGTH MIN.-MAX. 10 mm - 30 mm 11 mm - 35 mm
A B
A
B
43
BRADDER
STAPLER & BRADDER
ELECTRICAL FASTENING TOOLS
HAND - TACKERS
HAND-TACKER
Easy-to-use and lightweight hand-tacker for staplesand brads up to 12mm. The patented safety-lockingdevice of the handle, locks it easily without extraparts as clasps, belts etc. The cartridge opens likeair-fasteners for easy loading or de-jamming. Allsteel construction for durable long life.
Applications:Upholstery, decoration, frameworks, office, publication etc
3-in-1. Heavy duty professional hand-tacker for staples, pins and brads up to 16 mm. All steel construction for a worry-less long life. Adjustablestapling power to avoid damaging the working surface. Very easy feeding and de-jamming systemof fastening materials.
Applications:Upholstery, furniture, shipbuilding, decoration, publications, frameworks, advertising etc.
CR 112
HAND-TACKER
CR 568
HAND-TACKERS
SPECIFICATIONS
LENGTH 166 mm
HEIGHT 85 mm
WIDTH 24 mm
WEIGHT 0,56 kg
FASTENER’S SPECIFICATIONS
ΤYPE 80 MB
CROWN/HEAD 13 mm 1,50 x 0,70 mm
WIRE DIMENSIONS 0,65 x 0,95 mm 0,90 x 0,70 mm
LENGTH MIN.-MAX. 4mm -12mm 12 mm
A B
SPECIFICATIONS
LENGTH 190 mm
HEIGHT 115 mm
WIDTH 26 mm
WEIGHT 0,87 kg
FASTENER’S SPECIFICATIONS
ΤYPE T50 I 12
CROWN/HEAD 10,6 mm - 1,00 x 2,00 mm
WIRE DIMENSIONS 0,60 x 0,70 mm 1,00 x 1,25 mm 1,00 χ 1,25 mm
LENGTH MIN.-MAX. 6mm -14mm 15 mm 11mm - 16mm
A B C
A
B
A
Γ
B
46
Professional hand-tacker for staples and brads up to16 mm. New generation tool, with ergonomic handle,easy use, two positions regulation of power,patented safety-locking and opening of cartridge likeair-fasteners for easy loading and de-jamming. Easyto use without recoil, all-steel construction fordurable long-life.
Applications:Upholstery, furniture, shipbuilding, decoration, publications, frameworks, advertising etc.
Heavy duty professional stapler for 6 and 8 mmlength. New generation tool, with ergonomic handleeasy use and reduced hand-fatigue. Unique anti-jammingsystem guarantees continuous and virtually flawlessoperation. Two-position turning anvil for temporaryor permanent stapling. Easy loading of two kinds ofstaples, type 24 and type 26. All-steel construction for a long worry-less life.
Applications:Office, florists, upholstery, packing, decoration, etc.
CR 153
CR 250
HAND-TACKERS
HAND-TACKER
HAND-TACKER
SPECIFICATIONS
LENGTH 185 mm
HEIGHT 110 mm
WIDTH 24 mm
WEIGHT 0,87 kg
FASTENER’S SPECIFICATIONS
ΤYPE 53 12
CROWN/HEAD 11,3 mm 1,00 x 2,00 mm
WIRE DIMENSIONS 0,55 x 0,75 mm 1,00 x 1,25 mm
LENGTH MIN.-MAX. 6mm-16mm 11mm-16mm
A B
SPECIFICATIONS
LENGTH 180 mm
HEIGHT 55 mm
WIDTH 21 mm
WEIGHT 0,37 kg
FASTENER’S SPECIFICATIONS
ΤYPE 24 26
CROWN 12,9 mm 12,7 mm
WIRE DIMENSIONS 0,45 χ 0,75 mm 0,45 χ 0,50 mm
LENGTH MIN.-MAX. 6mm-8mm 6mm-8mm
A B
A
B
47
A
B
FASTENING MATERIALS
FASTENING MATERIALS
80 SERIES(4-25mm)
TYPE
80/4
80/6
80/8
80/10
80/12
80/14
80/16
80/18
80/20
80/22
80/25
71 SERIES(6-14mm)
40 SERIES(4-20mm)
779 SERIES(8-25mm)
SUITABLE FOR
CRISCO:
CR 80/16N
CR 80/16 AUT
CR 80/16 LN 50A
CR 80/25
CR 80/16EL
CR 80/25EL
CR 112
AOK:
CA 7617
& relevantpneumatic, electricand hand fasteningtools.
TYPE
71/6
71/8
71/10
71/12
71/14
SUITABLE FOR
CRISCO:
CR 71/16
CR 71/16 AUT
CR 71/16 LN50A
& relevantpneumatic, electricand hand fasteningtools.
TYPE
80/4 Inox
80/6 Inox
80/8 Inox
80/10 Inox
80/12 Inox
80/14 Inox
SUITABLE FOR
CRISCO:
CR 80/16N
CR 80/16 AUT
CR 80/16 LN 50A
CR 80/25
CR 80/16EL
CR 80/25EL
CR 112
AOK:
CA 7617
& relevantpneumatic, electricand hand fasteningtools.
TYPE
40/4
40/4 INOX
40/6
40/8
40/10
40/12
40/14
40/16
40/18
40/20
SUITABLE FOR
FASCO:
F1A 40-16
F1B 40-19
F21P 40-25
& relevantpneumatic, fasteningtools.
TYPE
779 / 8
779/10
779/12
779/14
779/16
779/18
779/20
779/22
779/25
SUITABLE FOR
CRISCO:
CR 779-25 PLIER
CR 779/25 SJ
CR 779/16 BJ
& relevantpneumatic, fasteningtools.
TYPE
R 410
R 412
R 414
R 416
R 419
R 422
R 425
R 430
R 435
R 438
SUITABLE FOR
CRISCO:
CR 90/25
CR 90/32B
CR 90/40L4
CR 90/40HD
CR 90-12/35EL
& relevantpneumatic, and electric fastening tools.
Inox - Antimagnetic
80 SERIESINOX(4-14mm)
R400 SERIES(10-38mm)
50
Crown 13mmCrown 13mm
Crown 13mm
Crown 12,2mm Crown 5,6mm
Crown 4,8mm
Crown 9,1mm
FASTENING MATERIALS
92 SERIES(9-40mm)
TYPE
92 / 9
92/12
92/15
92/20
92/25
92/30
92/35
92/40
V800 SERIES(25-63mm)
KG700 SERIES(25-50mm)
14 SERIES(20-50mm)
P SERIES(12-50mm)
SUITABLE FOR
CRISCO:
CR 92/40HD
CR 92/R825
CR 92/R838
& relevantpneumatic, fasteningtools.
TYPE
V 825
V 830
V 835
V 840
V 845
V 850
V 855
V 860
V 863
SUITABLE FOR
CRISCO:
CR G50 H5
CR G/NT64C
& relevantpneumatic, fasteningtools.
TYPE
R 810
R 814
R 816
R 819
R 825
R 830
R 835
R 838
SUITABLE FOR
CRISCO:
CR 92/R825
CR 92/R838
& relevantpneumatic, fasteningtools.
TYPE
KG 725
KG 730
KG 740
KG 750
SUITABLE FOR
FASCO:
F4P B7/NT50
Haubold & relevantpneumatic fasteningtools.
TYPE
14/20
14/25
14/30
14/35
14/40
14/45
14/50
SUITABLE FOR
BeA pneumatic fastening tools
TYPE
P/12
P/16
P/19
P/25
P/32
P/38
P/45
P/50
SUITABLE FOR
CRISCO:
CR P40
& relevantpneumatic, fasteningtools.
R800 SERIES(10-38mm)
51
Crown 6,4mm
Crown 7,9mm
Crown 10,3mmCrown 8,3mm
Crown 7,8mm
Crown 25mm
FASTENING MATERIALS
32 SERIESFor packingmachines
TYPE
32/15
32/18
50 SERIES(6-14mm)
24 SERIES 53 SERIESFor hand fasteningtools
(6-18mm)
SUITABLE FOR
CRISCO:
CR ADB 32/19
& relevant packingmachines.
TYPE
50/6
50/8
50/10
50/12
50/14
SUITABLE FOR
AOK:
CA 7617
& relevant electricand hand fasteningtools.
TYPE
35/15
35/18
SUITABLE FOR
CRISCO:
CR ADB 35/19
CR HCC 35/18
& relevant packingmachines.
TYPE
T50/6
T50/8
T50/10
T50/12
T50/14
SUITABLE FOR
CRISCO:
CR 568
AOK:
CA 7617
& relevant handfastening tools.
TYPE
24/6
24/8
SUITABLE FOR
CRISCO:
CR 250
& relevanthand-tackers.
TYPE
53/6
53/8
53/10
53/12
53/14
53/16
53/18
SUITABLE FOR
CRISCO:
CR 153
AOK:
τ8
τ9
τ14
MAESTRI: All types & relevantelectric and handfastening tools.
35 SERIESFor packingmachines
T50 SERIESFor hand fasteningtools
(6-14mm)
0,50 x 1,25
9,6
10,6
Ø 0,55 x 0,75
10,2
12
Crown 12,9 mm
6- - 1/4’’
- 5/16’’8-
26 SERIES TYPE
26/6
26/8
SUITABLE FOR
CRISCO:
CR 250
& relevanthand-tackers.
11,8
Crown 12,7 mm
6- - 1/4’’
- 5/16’’8-
52
Crown 33,8mm
Crown 36,8mm
Crown 11,3mm
Crown 9,9mm
Crown 12,3mm
24Ø 0,45 x 0,75
26Ø 0,45 x 0,50
FASTENING MATERIALS
Headless Pin
6 SERIES(12-50mm)
TYPE
6/12
6/15
6/17
6/20
6/22
6/25
6/30
6/35
6/40
6/45
6/50
Pin with head
MB SERIES(12-40mm)
Headless Pin
8 SERIES(15-40mm)
Brad with smallhead
12 SERIES(11-57mm)
SUITABLE FOR
CRISCO:
CR 64/12-22
CR P64/35 SCT
CR P64/50 SCT
& relevantpneumatic fasteningtools.
TYPE
MB 12
MB 15
MB 18
MB 20
MB 25
MB 30
MB 35
MB 40
SUITABLE FOR
CRISCO:
CR MB-8/40
CR 112
& relevantpneumatic and handfastening tools.
TYPE
CT6-12
CT6-15
CT6-17
CT6-20
CT6-25
CT6-30
CT6-35
CT6-40
CT6-45
CT6-50
SUITABLE FOR
CRISCO:
CR P64/35SCT
CR P64/50SCT
& relevantpneumatic fasteningtools.
TYPE
I-15
I-20
I-25
I-30
SUITABLE FOR
CRISCO:
CR GN-I30
CR 568
& relevantpneumatic and handfastening tools.
TYPE
8/15
8/18
8/20
8/25
8/30
8/35
8/40
SUITABLE FOR
CRISCO:
CR MB-8/40
& relevantpneumatic fasteningtools.
TYPE
12-11
12-13
12-16
12-20
12-25
12-30
12-30 INOX
12-35
12-40
12-45
12-50
12-55
12-57
SUITABLE FOR
CRISCO:CR GN-I30CR 12/32S2CR 12/57S2CR 90-12/35ELCR 12/35ELCR P-3515/F18CR 568CR 153AOK: CA 7617
& relevantpneumatic, electricand hand fasteningtools.
Headless Brad
I SERIES(15-30mm)
Headless Pin
CT6 SERIES(12-50mm)
53
FASTENING MATERIALS
Brad with smallhead
LS II SERIES(15-40mm)
TYPE
LS II 15
LS II 20
LS II 25
LS II 30
LS II 40
Brad with smallhead
NDSERIES(30-70mm)
SUITABLE FOR
SENCO:
LS II
MAESTRI:All types.
TYPE
ND 30
ND 38
ND 45
ND 50
ND 55
ND 60
ND 64
ND 70
SUITABLE FOR
CRISCO:
CR ND64M
& relevantpneumatic fasteningtools.
TYPE
14-20
14-25
14-30
14-35
14-40
14-45
14-50
14-55
14-60
14-64
14-70
SUITABLE FOR
CRISCO:
CR 14/50L
CR 14/64 P5
CR F1.8/57C
& relevantpneumatic fasteningtools.
TYPE
DA 13 (25 mm)
DA 15 (32 mm)
DA 17 (38 mm)
DA 19 (45 mm)
DA 21 (50 mm)
DA 23 (55 mm)
DA 25 (63 mm)
SUITABLE FOR
FASCO:
F3C BA-50
& relevantpneumatic fasteningtools.
Tilt 340
TYPE
FST 15HC
FST 18HC
FST 20HC
FST 25HC
FST 30HC
FST 35HC
FST 40HC
FST 45HC
FST 50HC
SUITABLE FOR
CRISCO:
CR F1.8/57C
Brad with smallhead
14 SERIES(20-70mm)
Inclined brad withsmall head
DA SERIES(25-63mm)
Steel brad withsmall head
FST SERIES(15-50mm)
54
FASTENING MATERIALS
T-nail in strips
NT SERIES(32-63mm)
TYPE
NT 2,2/32
NT 2,2/38
NT 2,2/50
NT 2,2/60
NT 2,2/63
With round head instrips
LSN SERIES(100-160mm)
With round head incoils
RBW SERIES(30-90mm)
SUITABLE FOR
CRISCO:
CR NT64F
CR G/NT64C
& relevantpneumatic fasteningtools.
TYPE
LSN 3,8x100
LSN 3,8x110
LSN 3,8x120
LSN 3,8x130
LSN 4,2x130
LSN 4,2x145
LSN 4,2x160
LSN 4,6x145
LSN 4,6x160
SUITABLE FOR
CRISCO:
CR S-130G
CR S-160G
& relevantpneumatic fasteningtools.
Offered with withscrew body until130mm.
Tilt 21o, connectionwith plastic.
TYPE
NT 15HC
NT 18HC
NT 25HC
NT 32HC
NT 38HC
NT 45HC
NT 50HC
NT 57HC
NT 64HC
SUITABLE FOR
CRISCO:
CR NT64F
TYPE
RBW-T4 21/30
RBW-T4 21/40
RBW-T4 21/50
SUITABLE FOR
CRISCO:
CR C-50WPC
CR C65
Offered with ringbody.
Tilt 16o , connectionwith wire.
TYPE
RHN 2,9/60
RHN 2,9/70
RHN 2,9/80
RHN 2,9/90
SUITABLE FOR
FASCO:
F6C RHN 20
& relevant pneumatic fasteningtools.
Tilt 21o , connectionwith plastic.
TYPE
RBW 21/30
RBW 21/40
RBW 21/50
RBW 25/50
RBW 25/60
RBW 27/70
RBW 29/80
RBW 29/90
SUITABLE FOR
CRISCO:CR C65CR C75CR C90
& relevantpneumatic fasteningtools.
Offered with smooth,ring or screw body.
Tilt 16o , connectionwith wire.
With round headin coils
RBW SERIEST4 (20-50mm)
Steel T-nail in strips
NTHC SERIES(15-64mm)
With round head instrips
RHN SERIES(60-90mm)
55
FASTENING MATERIALS
With round head incoils
RBW SERIESROOF(19-45mm)
TYPE
RBW ROOF 19
RBW ROOF 25
RBW ROOF 32
RBW ROOF 38
RBW ROOF 45
Nail with roundhead in coils
CHD SERIES(16-25mm)
PlasticRosette for fastening
SUITABLE FOR
FASCO:
F4 CN15W-45 ROOF
& relevantpneumatic fasteningtools.
Tilt 16Ο, connection with wire.
TYPE
MINI CF/06
MINI CF/08
MINI CF/09
MINI CF/12
MINI CF/15
SUITABLE FOR
CRISCO:
CR MINI-CF 16S
& relevantpneumatic fasteningtools.
TYPE SUITABLE FOR
FASCO:
F33 CN15W-PS50 SCR
F45 CN15W-PS65L SCR
F6AC CN15W-90B SCR
TYPE
CF/08
CF/10
CF/13
CF/15
SUITABLE FOR
CRISCO:
CR CF 15S
& relevantpneumatic fasteningtools.
TYPE
COIL 16/16
COIL 16/18
COIL 16/25
COIL 16/16HS*
* BRONZE
W/ DECORATIVE
HEAD.
SUITABLE FOR
ATRO ROLL 32LD
Tilt 0Ο, connection with wire.
TYPE
PC25
SUITABLE FOR
CRISCO:
CR C-50WPC
Corrugated nail
ΣειρA CF(8-15mm)
Corrugated nail
MiniCFSERIES(6-15mm)
SCRAILSSCR strips
CN-AG:
2,8/3,2x35
2,8/3,2x45
2,8/3,2x50
2,8/3,2x57
SCR coil
RBW:
2,8/3,2x35
2,8/3,2x45
2,8/3,2x50
2,8/3,2x57
2,8/3,2x65
2,8/3,2x75
2,8/3,2x88
8- -5/16’’
56
FASTENING MATERIALS
V-Nail
VEH SERIES(7-15mm)
TYPE
VEH 07
VEH 10
VEH 12
VEH 15
Wedge
W5 SERIES(15mm)
C - Ring
C1610SERIES(6,6mm)
SUITABLE FOR
CRISCO:
CR V15-EC01
CR V15-EH
& relevantpneumatic fasteningtools.
TYPE
W5/15
SUITABLE FOR
CRISCO:
CR W5/15
CR P-3515/F18
& relevantpneumatic fasteningtools.
TYPE
CL-03 (22x12,3mm)
CL-04 (22x14,1mm)
CL-71 (19x12,3mm)
CL-72 (19x14,1mm)
CL-05 (19x15,5mm)
SUITABLE FOR
CRISCO:
CR MR 66
& relevantpneumaticfastening tools.
TYPE
C 1524/12
SUITABLE FOR
CRISCO:
CR SC 7
CR SC 7C
CR SC 7E MN
CR SC 77XE LN
& relevantpneumatic fasteningtools.
TYPE
C 1620 G (10,4mm)
SUITABLE FOR
CRISCO:
CR SC 720
& relevantpneumatic fasteningtools.
TYPE
C 1610 (6,6mm)
SUITABLE FOR
CRISCO:CR SC 73462
& relevant pneumaticfastening tools.
Clinch Clip
CL SERIES(12,3-15,5mm)
C - Ring
C1620 GSERIES(10,4mm)
57
Width: 19mm & 22mm
Crown: 7,9mm
C - Ring
C1524SERIES(12mm)
Height: 12,3 - 15,5mm
H
FASTENING MATERIALS
NAILS
CORRUGATED NAILS - WEDGE
THE TABLE BELOW PRESENTS THE CRISCO PRODUCTS CODING IN EQUIVALENCE WITH OTHER COMPANIES' CODES.
STAPLESCRISCO FASCO BeA ATRO STANLEY SENCO OMER KIHLBERG PREBENA BULLE
80 80 80-380 8 (80) AT 80 680 A 8071 7C 71 7 (72) C 3G 670 W (C800)
779 779 65 779 M (DF65)50 50 95 50 50 D
T50 A11 ZH (H) T50 671 PF24 24 2426 26 2640 4000 93 W 40 690 (KL4000) TB53 530 R53 F53 53 53 VX
R400 90 90-190 90 L 90 781 E R40092 92 92-192 92 92 664 H
V800 G 155 100 N M2 783 L V800KG700 B7 700 ZR800 SG M SG44 782 G/S R8OO
14 G 14 14 M1 LM35 35 35 A XB 35 560 B32 32 32 C 32 561 RP SNW P/W5562 WP 784 WS
CRISCO FASCO BeA ATRO STANLEY SENCO OMER KIHLBERG PREBENA BULLE6 A64 S700 MINI CZ/SZ 6 506 AL F648 B82 MINI-S 8 BEI GA S100 I-PIN AZ I GA P1
CT6 Micro Brad Β6MB MB SK200 MINITIP M JA12 GN SK300 TI PIN AX/AY 12 512 J, JM F12
LS II LS II14 FN SK400 TIP 14 516 N FT14FSTND FNDF 17 NDDA BA SKDA DA, UA DA DA
CRISCO FASCO BeA ATRO STANLEY SENCO OMER KIHLBERG PREBENA BULLENT NT T TN22 T FN21 T
NTHC RH17 ΤΝ22 BetonRHN RHN20 R20 RH21 SNFRH SNP RK RHNLSN RHN20 BERTA STNRBW CN15W BDC RHC SCN CNW CNWROOF CN15W-R DPN COIL 31 SCN ROOF CNZ
COIL 16 COIL 16
CRISCO FASCO BeA ATRO STANLEY SENCO OMER KIHLBERG PREBENA BULLEMiniCF
CF CF SCF-W15 CF WW (CF) CF WVEHW5 53
HOG RINGSCRISCO FASCO BeA ATRO STANLEY SENCO OMER KIHLBERG PREBENA BULLE
C1524 HR 23 TAPE HR23
C1620 HR62-CL20 HR 20 TAPE HR20
C1610
CL CL20-CL3
58
PINS - BRADS
AIR INSTALLATIONS’ EQUIPMENT
New, revolutionary technology’s product. It ismade of composite material (polyamide), a factthat makes it 5 to 10 times lighter than allmetallic ones existing till now. This means thatit radical reduces the operator’s daily fatiguesince he was obliged to carry 160 to 350 gramsover the tools weight while working. One pair ofPolyamide coupling weights ONLY 33 grams.
They integrate two more technologies: One-Touchand Universal. The release of the tool can nowbe effected by one-hand only (One-Touch).The female Quick Couplings can perfectly acceptall three kinds of male nipples of Italian, Germanand American type. They can perfectly fit themetallic nipples and relieve the operator fromthe trouble of matching pairs (Universal).
They are absolutely safe (tested at 30 bar), theydon’t mar the surfaces at an accidental hit, theyensure perfect air-flow and have the same orlonger life-time as the metallic ones. Integratingpatented locking system with four cylindricalpins to avoid damaging the nipple, they offer atrouble-free operation.The revolutionary Polyamide Composite QuickCoupling can be used, besides air installations,for transport of gases and non-edible liquidssuch as water, salted-water, gasoline, petrol andvarious solvents that can be transported viahoses.
CRISCO UniPOLYAMIDECOMPOSITEQUICK COUPLINGS
UNIVERSAL TYPE
AIR INSTALLATIONS' EQUIPMENT
60
FEMALE QUICK COUPLING, MALETHREADING, UNIVERSAL TYPE
FEMALE QUICK COUPLING, MALETHREADING, UNIVERSAL TYPE
FEMALE QUICK COUPLING, FEMALETHREADING, UNIVERSAL TYPE
FEMALE QUICK COUPLING, FEMALETHREADING, UNIVERSAL TYPE
FEMALE QUICK COUPLING WITH HOSEADAPTER , UNIVERSAL TYPE
FEMALE QUICK COUPLING FOR PLASTICPIPES, UNIVERSAL TYPE
FEMALE QUICK COUPLING FORPLASTIC PIPES, UNIVERSAL TYPE
QUICK COUPLING NIPPLE, MALETHREADING, GERMAN TYPE
QUICK COUPLING NIPPLE, FEMALETHREADING, GERMAN TYPE
QUICK COUPLING NIPPLE, WITH HOSEADAPTER, GERMAN TYPE
QUICK COUPLING NIPPLE FOR PLASTICPIPES, GERMAN TYPE
QUICK COUPLING NIPPLE FOR PLASTICPIPES, GERMAN TYPE
TYPE DESCRIPTION
458005 40SF - 1/2’’
TYPE DESCRIPTION
458008 20SF-C ø 8 x 10 mm
TYPE DESCRIPTION
458012 O-20 PH ø 8 mm
TYPE DESCRIPTION
458015 O-20 PFC - ø 6 x 8 mm
TYPE DESCRIPTION
458006 20SH - ø 8 mm
TYPE DESCRIPTION
458001 20SM - 1/4’’
TYPE DESCRIPTION
458003 40SM - 1/2’’
TYPE DESCRIPTION
458010 O-20PM - 1/4’’
TYPE DESCRIPTION
458007 20 SF-C ø 6 x 8 mm
TYPE DESCRIPTION
458016 O-20 PFC - ø 8 x 10 mm
TYPE DESCRIPTION
458011 O-20 PF - 1/4’’
TYPE DESCRIPTION
458004 20SF - 1/4’’
AIR INSTALLATIONS' EQUIPMENT
61
BAYONET HOSE COUPLING MALE BAYONET COUPLING FEMALE THREADING NIPPLE
MALE HOSE ADAPTER RING FOR BAYONET COUPLINGS COUPLING FOR PLASTIC PIPES
FEMALE HOSE ADAPTER HOSE CONNECTOR FEMALE QUICK-COUPLINGWITH MALE THREADING
(ITALIAN TYPE)
MALE HOSE REVOLVING ADAPTER MALE THREADING NIPPLE FORPLASTIC TUBES
FEMALE QUICK-COUPLINGFOR HOSES
(ITALIAN TYPE)
SPECIAL NIPPLE FOR BAYONET RINGS REVOLVING MALE THREADING NIPPLEFOR PLASTIC TUBES
MALE QUICK-COUPLING WITH MALE THREADING
(ITALIAN TYPE)
TYPE DESCRIPTION
455001 ø 8mm
TYPE DESCRIPTION
450205 1/4''
TYPE DESCRIPTION
450214 1/4'' - ø 6x8mm
TYPE DESCRIPTION
450204 1/4'' for hoseø8mm
TYPE DESCRIPTION
450210 3/8'' revolving
TYPE DESCRIPTION
450206 1/4'' - 1/4''
TYPE DESCRIPTION
455009 ø ø 8mm
TYPE DESCRIPTION
450209ø 1/4'' - ø 6x8mm
TYPE DESCRIPTION
453001 ø 1/4''
TYPE DESCRIPTION
453010 ø 1/4''
TYPE DESCRIPTION
453002 ø ø 8mm
TYPE DESCRIPTION
455025 ø 6x8mm
TYPE DESCRIPTION
455002 1/4'' for hoseø8mm
455003 1/4'' for hoseø10mm
455004 3/8'' for hoseø8mm
TYPE DESCRIPTION
450202 3/8''
450212 1/4''
450213 Μ14 x 1/25''
TYPE DESCRIPTION
455020 1/4'' - ø 6x8mm
455021 1/4'' - ø 8x10mm
AIR INSTALLATIONS' EQUIPMENT
62
Πιστόλι καθαρισμού με κοντό ρύγχος. Πιστόλι καθαρισμού με μακρύ ρύγχος.Πιστόλι καθαρισμού με λεπτό & μακρύ ρύγ-χος με ελεγχόμενη ροή αέρα.
Αερόμετρο (φουσκωτήρι) για λάστιχα αυτο-κινήτων.
MALE QUICK-COUPLING WITHFEMALE THREADING
(ITALIAN TYPE)
MALE QUICK-COUPLING FORPLASTIC TUBES
(ITALIAN TYPE)
MALE QUICK-COUPLING WITH FEMALE THREADING
(GERMAN TYPE)
MALE QUICK-COUPLINGBELL-SHAPED FOR HOSE
(ITALIAN TYPE)
FEMALE QUICK-COUPLING WITH MALE THREADING
(GERMAN TYPE)
MALE QUICK-COUPLING WITH HOSE (GERMAN TYPE)
MALE QUICK-COUPLING FORHOSE ADAPTER
(ITALIAN TYPE)
FEMALE QUICK-COUPLING FOR HOSE (GERMAN TYPE)
FEMALE QUICK-COUPLING FOR PLASTIC TUBES
(GERMAN TYPE)
FEMALE QUICK-COUPLING FORPOLYURETHANE TUBE
(ITALIAN TYPE)
MALE QUICK-COUPLING WITH MALE THREADING
(GERMAN TYPE)
MALE QUICK-COUPLING FOR PLASTIC TUBES
(GERMAN TYPE)
TYPE DESCRIPTION
453011 1/4''
TYPE DESCRIPTION
450103-1ø ø 6x8mm
TYPE DESCRIPTION
454011 ø 1/4''
TYPE DESCRIPTION
450101 For air hose
TYPE DESCRIPTION
454012 ø ø 8mm
TYPE DESCRIPTION
453012 ø 8mm
TYPE DESCRIPTION
454002 ø ø 8mm
TYPE DESCRIPTION
454005ø ø 6x8mm
TYPE DESCRIPTION
453005 ø 6x8mm
TYPE DESCRIPTION
454010 ø 1/4''
TYPE DESCRIPTION
454015 ø 6x8mm
TYPE DESCRIPTION
454001 1/4''
454003 1/2''
AIR INSTALLATIONS' EQUIPMENT
63
Πιστόλι βαφής κάτω βάζο 1,00 kg.Διατίθεται εναλλακτικά με μπέκ διαμέτρου:1,0 - 1,2 - 1,4 - 1,6 - 1,8 - 2,0 - 2,2 - 2,5 -3,0 - 4,0mm
Πιστόλι βαφής άνω βάζο 1,00 kg.Διατίθεται εναλλακτικά με μπέκ διαμέτρου:1,0 - 1,2 - 1,4 - 1,6 - 1,8 - 2,0 - 2,2 - 2,5 -3,0 - 4,0mm
Πιστόλι αερογράφος 125 gr.Διατίθεται εναλλακτικά με μπέκ διαμέτρου:0,3 - 0,5 - 0,7mm
Πιστόλι καθαρισμού με λεπτό & μακρύ ρύγ-χος με ελεγχόμενη ροή αέρα.
Αερόμετρο (φουσκωτήρι) για λάστιχα αυτο-κινήτων.
MINI FEMALE QUICK-COUPLING WITHMALE THREADING
MINI MALE QUICK-COUPLING FOR HOSE
PARALLEL NIPPLE
MINI FEMALE QUICK-COUPLING FOR HOSE
MINI FEMALE QUICK-COUPLING FORPLASTIC TUBES
REDUCTION PARALLEL NIPPLE
MINI MALE QUICK-COUPLING WITH MALE THREADING
MINI MALE QUICK-COUPLING FOR PLASTIC TUBES
PARALLEL REDUCER
MINI MALE QUICK-COUPLING WITH FEMALE THREADING
SLEVE PARALLEL PLUG
TYPE DESCRIPTION
456001 1/4''
TYPE DESCRIPTION
456012 ø ø 8mm
TYPE DESCRIPTION
456002 ø ø 8mm
TYPE DESCRIPTION
456010 1/4''
TYPE DESCRIPTION
456015ø ø 6x8mm
TYPE DESCRIPTION
456011 1/4''
TYPE DESCRIPTION
400101ø 1/4'' - 1/4''
400102ø 3/8'' - 3/8''
400103ø 1/2'' - 1/2''
TYPE DESCRIPTION
07P0002 ø 1/8''
404001 ø 1/4''
404002 ø 3/8''
TYPE DESCRIPTION
400205 1/4'' - 1/8''
400206 3/8'' - 1/4''
400207 1/2'' - 1/4''
400208 1/2'' - 3/8''
TYPE DESCRIPTION
400202ø 1/4'' - 1/4''
400203 3/8'' - 3/8''
400201ø 1/2'' - 1/2''
TYPE DESCRIPTION
400399ø 1/4'' - 1/8''400303 ø 3/8'' - 1/8''400305ø 1/2'' - 1/8''400304 ø 3/8'' - 1/4''400301ø 1/2'' - 1/4''400307ø 1/2'' - 3/4''400302ø 1/2'' - 3/8''
TYPE DESCRIPTION
456005ø ø 6x8mm
AIR INSTALLATIONS' EQUIPMENT
64
Πιστόλι βαφής κάτω βάζο 1,00 kg.Διατίθεται εναλλακτικά με μπέκ διαμέτρου:1,0 - 1,2 - 1,4 - 1,6 - 1,8 - 2,0 - 2,2 - 2,5 -3,0 - 4,0mm
Πιστόλι βαφής άνω βάζο 1,00 kg.Διατίθεται εναλλακτικά με μπέκ διαμέτρου:1,0 - 1,2 - 1,4 - 1,6 - 1,8 - 2,0 - 2,2 - 2,5 -3,0 - 4,0mm
Πιστόλι αερογράφος 125 gr.Διατίθεται εναλλακτικά με μπέκ διαμέτρου:0,3 - 0,5 - 0,7mm
Πιστόλι καθαρισμού με κοντό ρύγχος. Πιστόλι καθαρισμού με μακρύ ρύγχος.Πιστόλι καθαρισμού με λεπτό & μακρύ ρύγ-χος με ελεγχόμενη ροή αέρα.
T-CONNECTION WITH FEMALE THREADING
BRANCH-PIPE (Y) ELASTIC PIPE
T-CONNECTION WITH MALE THREADING
MOIST EXTRACTION TAP
ELASTIC PIPE SPIRAL
T-CONNECTION FOR AIR HOSE
HOSE CLAMP
BRANCH-PIPE CROSS
AIR SYSTEMS LUBRICANT
PLASTIC PIPE STRAIGHT
TYPE DESCRIPTION
180101 1/4''
TYPE DESCRIPTION
180103 ø 1/4''
TYPE DESCRIPTION
180100 1/4''
TYPE DESCRIPTION
180202 For hose ø 8mm
TYPE DESCRIPTION
040131ø ø 8-16mm
TYPE DESCRIPTION
180102 1/4''
TYPE DESCRIPTION
LUBAIR ø
TYPE DESCRIPTION
380104-2 ø8x15mm, 20Bar
380101-1 Transparentø8x14mm, 20Bar
380101-2 Transparentø10x16mm, 20Bar
TYPE DESCRIPTION
040117-1 ø 6x8mm, 20Bar
040135 ø 8x10mm, 20Bar
TYPE DESCRIPTION
040137 ø 4x6mm
040138 ø 6x8mm
040136 ø 8x10mm
TYPE DESCRIPTION
110101 ø 1/4''
Special lubricant containingoil, teflon and silicon for the right oiling of air-driven machines and tools.
AIR INSTALLATIONS' EQUIPMENT
65
720 DEGREES ROTATION, PNEUMATICQUICK COUPLER’S INLET
SWIV-EL
Easy to installAssembly instructionsScrew part A into tool (lubricate the O-ring),then insert part B into part A then lock part Conto part A.
Disassemble sequenceRemove part C, then remove part B before removing part A from tool.
Professional solutions No need of additional tools to upgrade yourwork.
The pneumatic 720 degrees rotation quickcoupling SWIV-EL is the absolute solution in thedaily problems of functionalism and easinessin the work of craftsmen of all professions. Ithas a patented system of rotating to all directions,that facilitates the work in narrow places, difficult corners or distant points, preventingthe air hose from bending or being an obstacleand also it prevents the quick coupling to beworn out easily. They are suitable for ALL toolsthat function with air. They come with 1/4“threading and nipples for all the air couplersthat exist in the market (German, Italian, Americanand Japanese type).
SafetySWIV-ELs operate without dead angle; preventingthe air hose from bending because of a specialworking angle or lack of space.
Added ValueProlong the life span of coupler and hose.Save on accessories costs.Simplifies work and helps the craftsmen wristto get less fatigue.
With SWIV-EL Without SWIV-EL
AIR INSTALLATIONS' EQUIPMENT
66
REVOLVING QUICK COUPLING, TWO DIRECTION, 720-1G
REVOLVING QUICK COUPLING, TWO DIRECTION, 720-4I
REVOLVING QUICK COUPLING, TWO DIRECTION, 720-2A
TYPE DESCRIPTION
457001 GERMAN TYPE
TYPE DESCRIPTION
457004 ITALIAN TYPE
TYPE DESCRIPTION
REVOLVING QUICK COUPLING, TWO DIRECTION, 720-3J
TYPE DESCRIPTION
457003 JAPANESE TYPE457002 AMERICAN TYPE
Care and Love forthe Environment
We participate in the Collective System of Alternative Management
of Electric and Electronic Equipment Waste.
recyclingappliances s.a.
167 Athinon Avenue, GR-124 61 Haidari - Athens, Greece
Tel. & fax: 0030 210 5817319 (9 lines), e-mail: [email protected]
www.cristallidis.gr, www.crisco.gr