Upload
yusairri
View
347
Download
5
Embed Size (px)
Citation preview
Information Information Communication and Communication and
TechnologyTechnology
Computer NetworkingComputer Networking
cable
Cable Crimping and Testing
Crimp and test UTP cable*Straight Cable*Crossed Cable
Crimping and Test UTP CableCrimping and Test UTP Cable
A cable is needed to connect a computer to a wired local area network (LAN).
There are two types of cables.
The first is the “straight cable” which is used to connect computers through a hub.
The second type is the “crossed cable” for a direct connection between two computers without using a hub.
Crimping and Test UTP CableCrimping and Test UTP Cable
How to crimp a straight cable and crossed cable using Untwisted Pair cable and RJ45 connectors?
Befor that, we have to know about hardware for crimping cable.
Hardware for Crimping CableHardware for Crimping Cable
UTP Cable (Untwisted Pair )
Hardware for Crimping CableHardware for Crimping Cable
RJ45 Connectors
Hardware for Crimping CableHardware for Crimping Cable
LAN Cable Tester
Hardware for Crimping CableHardware for Crimping Cable
Crimp Tool
Hardware for Crimping CableHardware for Crimping Cable
Cable Stripper
Hardware for Crimping CableHardware for Crimping Cable
Cutter
Now, we know about hardware for
crimping cable
After this,you need to know about two type wiring schematic?
568A wiring schematic
568B wiring schematic
What different between 568A and 568B schematic?
568 A 568 B
• For a straight cable, both ends use the same wiring schematics (568B wiring schematic is recommended).
• For a crossover cable, both ends use different wiring schematics.