Use the material found in the box to complete this vinyl sticker.

Step 1. Remove the silver vinyl from your Start Here envelope.

Section 9C Page 1

Section 9CFirst Project

Cricut Explore One™ first project

Step 2. Remove the plastic cover from the mat.

Step 3. Smooth the silver vinyl onto the cutting mat in the top left corner inside the grid.

Section 9C Page 2

Section 9CFirst Project

Cricut Explore One™ first project

Step 5. Turn the Smart Set® dial to “Vinyl.”

Section 9C Page 3

Section 9CFirst Project

Cricut Explore One™ first projectStep 4. Position the mat underneath the mat guides. Keeping the mat pushed firmly against the machine’s rollers, press the Load/Unload button.

Tip: You will know the mat is loaded correctly when the Cricut® logo on the mat is directly under the machine rollers. Note that you can use the entire surface of the mat evenly by alternating which end of the mat you load into the machine first.

Tip: The Cricut Explore One™ first project is also available as a free Make it Now™ project, so you can make it as many times as you would like. To find the project, start at the project screen and select “Free for Cricut Explore One” from the Categories menu. Scroll through the photos of the free projects until you locate the Create vinyl sticker. When you click on the image, you will be taken to the project details screen. Click “Make It Now” to start the cutting process.

Section 9C Page 4

Section 9CFirst Project

Cricut Explore One™ first projectStep 6. Click “Go” on your computer or iPad® to begin the cutting process. Follow the onscreen prompts to cut your Create vinyl sticker.

Step 9. Remove the vinyl from the mat by gently bending the mat until one edge of the material releases.

Section 9C Page 5

Section 9CFirst Project

Cricut Explore One™ first projectStep 8. Once your Cricut Explore One™ machine has finished cutting, unload the mat by pressing the blinking Load/Unload button on the machine.

Section 9C Page 6

Section 9CFirst Project

Cricut Explore One™ first projectStep 10. Turn the mat over onto a flat surface and then slowly pull the mat away from the material.

Step 11. Peel vinyl sticker from the backing.

Section 9C Page 7

Section 9CFirst Project

Cricut Explore One™ first projectStep 12. Remove unwanted pieces from the design.

Step 13. Place vinyl sticker on project as desired.