7/25/2019 Creating a Frame Title Block.docx

1/2

Creating a Frame Title Block

This task shows you how to create a background sheet and insert a frame and a title block intoit.

Before You Begin, make sure you customized the following:

Grid:

De-activate the Grid icon from the Tools toolbar (bottom right).

Oen the GenDrafting!art."#TDrawingdocument.

1.$elect the Edit%Backgrounditems from the menu bar.

2."lick The &rame "reation icon from the Drawing toolbar.

!

2.$elect the Insert -> Drawing -> Frame and Title Blockitems from the menu bar.

The Insert Frame and Title Blockdialog bo' is dislayed:

http://www.staff.city.ac.uk/~ra600/ME2105/Catia%20course/CATIA%20Tutorials/draug_C2/samples/GenDrafting_part.CATDrawinghttp://www.staff.city.ac.uk/~ra600/ME2105/Catia%20course/CATIA%20Tutorials/draug_C2/samples/GenDrafting_part.CATDrawing

7/25/2019 Creating a Frame Title Block.docx

2/2

".nter the desired otions from the Insert Frame and Title Blockdialog bo'.

The frame and title block result as shown below:

hen the &rame "reation icon is activated you cannot edit the views. *se the Edit -> Wo

Of course+ if you add sheets+ the frame title block aears in the newly created sheets on the c

,Mechanical Design -,Drafting(Laouttab). "heck the !o" #ackground $iew otion and

frame and title view from the sheet you reviously created on the current drawing.