CR5-9 A-FGJ-A-E-HQQE 1x220/240 50HZ · GRUNDFOS DATA BOOKLET CR5-9 A-FGJ-A-E-HQQE 1x220/240 50HZ Grundfos Pump 96537532 Thank you for your interest in our products Please contact

GRUNDFOS DATA BOOKLET

CR5-9 A-FGJ-A-E-HQQE 1x220/240 50HZ Grundfos Pump 96537532

Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttp://www.lenntech.com/grundfos/CRFAM/96537532/CR-5-9-A-FGJ-A-E-HQQE.html

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

BE > THINK > INNOVATE

Company name: Lenntech BV - lenntech.comCreated by: [email protected]: +31 15 2610900Fax: +31 15 2616289Date: -

Printed from Grundfos CAPS [2013.03.059]

Position Qty. Description1 CR 5-9 A-FGJ-A-E-HQQE

Note! Product picture may differ from actual product

Product No.: 96537532

Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – allother wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handlingand easy service and access. Power transmission is via a split coupling. Pipework connection is viacombined DIN-ANSI-JIS flanges.

The pump is fitted with a 1-phase, fan-cooled asynchronous motor.

Further product detailsSteel, cast iron and aluminium components have an epoxy-based coating made in a cathodicelectro-deposition (CED) process. CED is a high-quality dip-painting process where an electricalfield around the products ensures deposition of paint particles as a thin, well-controlled layer on thesurface. An integral part of the process is a pretreatment. The entire process consists of theseelements:

1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.

PumpA standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motorstool by means of two coupling guards.

The pump head, pump head cover and flange for motor mounting is made in one piece. The pumphead has a combined 1/2" priming plug and air vent screw.

1/8

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96537532&freq=50&lang=ENU



The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal type isassembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type issuitable for high-pressure applications. The cartridge construction also protects the pump shaft from possiblewear from a dynamic O-ring between pump shaft and shaft seal.

Primary seal:- Rotating seal ring material: Silicon carbide (SiC)- Stationary seat material: Silicon carbide (SiC)

This material pairing is used where higher corrosion resistance is required. The high hardness ofthis material pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless steel sheet. The chambers are provided with aPTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,and the shape of the blades ensure a high efficiency.

The base is made of cast iron. The flanges and base are cast in one piece. The discharge side ofthe base has a combined drain plug and bypass valve. The pump is secured to the foundation byfour bolts through the base plate.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DINstandards. The motor is flange-mounted with tapped-hole flange (FT).Motor mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).Electrical tolerances comply with IEC 60034.

The motor has built-in thermal protection (PTO current and temperature sensors) in accordance withIEC 60034-11 and requires no further motor protection. The protection reacts to both slow- andquick-rising temperatures, e.g. constant overload and stalled conditions.As the thermal protection incorporates automatic reset, the motor must be connected in a way whichensures that the automatic reset cannot cause accidents.

Technical data

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 393 KLiquid temp: 293 KDensity: 998.2 kg/m³

2/8



Position Qty. DescriptionTechnical:Speed for pump data: 2767 rpmRated flow: 5.8 m³/hRated head: 42.2 mShaft seal: HQQEApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex A

Materials:Pump housing: Cast iron

EN-JL1030ASTM A48-30 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Installation:Maximum ambient temperature: 313 KMax pressure at stated temp: 25 bar / 120 °C

25 bar / -20 °CFlange standard: DINPipe connection: DN 25 / DN 32Pressure stage: PN 16 / PN 25Flange size for motor: FT115

Electrical data:Motor type: 90LBIE Efficiency class: NANumber of poles: 2Rated power - P2: 1.5 kWPower (P2) required by pump: 1.5 kW

1.5 kWMains frequency: 50 HzRated voltage: 1 x 220-230/240 VRated current: 9,90/8,90 AStarting current: 390 %Cos phi - power factor: 0,98/0,99Rated speed: 2750/2740 rpmMotor efficiency at full load: 72-70 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): F

Others:Minimum efficiency index, MEI ≥: 0.57Net weight: 40.5 kgGross weight: 43.2 kgShipping volume: 0.08 m3

3/8



96537532 CR 5-9 50 Hz

H[m]

0

5

10

15

20

25

30

35

40

45

50

55

60

65

Q [m³/h]0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0

eta[%]

0

10

20

30

40

50

60

70

80

90

100

CR 5-9, 1*230 V, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[kW]

0.0

0.5

1.0

1.5

2.0

NPSH[m]

0

2

4

6

8

P1

P2

4/8



H[m]

05

1015202530354045505560

Q [m³/h]0 1 2 3 4 5 6 7

eta[%]

0102030405060708090100

CR 5-9, 1*230 V, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[kW]

0.0

0.5

1.0

1.5

NPSH[m]

0

2

4

6P1

P2

ø35

ø140

75

20

490

141

100

250

ø100ø89

180

220

4 x

ø13.

5

19 x

24.

5G

1/2

139

178

321

G 1

/2G

1/2

Description ValueProduct name: CR 5-9 A-FGJ-A-E-HQQEProduct No: 96537532EAN number: 5700397593547

Technical:Speed for pump data: 2767 rpmRated flow: 5.8 m³/hRated head: 42.2 mHead max: 58.3 mImpellers: 9Shaft seal: HQQEApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex APump type: CR 5Stages: 9Pump version: AModel: A

Materials:Pump housing: Cast iron

EN-JL1030ASTM A48-30 B

Impeller: Stainless steelDIN W.-Nr. 1.4301AISI 304

Material code: ACode for rubber: E

Installation:Maximum ambient temperature: 313 KMax pressure at stated temp: 25 bar / 120 °C

25 bar / -20 °CFlange standard: DINConnect code: FGJPipe connection: DN 25 / DN 32Pressure stage: PN 16 / PN 25Flange size for motor: FT115

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 393 KLiquid temp: 293 KDensity: 998.2 kg/m³

Electrical data:Motor type: 90LBIE Efficiency class: NANumber of poles: 2Rated power - P2: 1.5 kWPower (P2) required by pump: 1.5 kW

1.5 kWMains frequency: 50 HzRated voltage: 1 x 220-230/240 VRated current: 9,90/8,90 AStarting current: 390 %Cos phi - power factor: 0,98/0,99Rated speed: 2750/2740 rpmMotor efficiency at full load: 72-70 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): FMotor protec: PTOMotor No: 85215706

Others:

5/8

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96537532&freq=50&lang=ENU



Description ValueMinimum efficiency index, MEI ≥: 0.57Net weight: 40.5 kgGross weight: 43.2 kgShipping volume: 0.08 m3

6/8



Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

96537532 CR 5-9 50 Hz

ø35

ø140

75

20

490

141100

250

ø100

ø89

180220

4 x ø13.5

19 x 24.5G 1/2

139

178

321

G 1/2 G 1/2

7/8



Note! All units are in [mm] unless others are stated.

96537532 CR 5-9 50 Hz

8/8

Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

Documents

CR5-9 A-FGJ-A-E-HQQE 1x220/240 50HZ · GRUNDFOS DATA BOOKLET CR5-9 A-FGJ-A-E-HQQE 1x220/240 50HZ Grundfos Pump 96537532 Thank you for your interest in our products Please contact