Embed Size (px)
Citation preview
Canada Pipeline Accessories | 1.888.349.3569 | www.flowconditioner.com | [email protected] | March 4, 16 48
CPA 50E Type A Flow Conditioner – Raised Face – FOEL/FOE
FOEL Style CPA Flow Conditioner FOE Style CPA Flow Conditioner
All dimensions are in inches. Weights calculated using 316SS. Custom sizes are available; please contact CPA for more information!
FOEL Offset Style Flange
NPS Schedule Insertion
Diameter (D) Flange
Diameter (OD) Thickness
(T) Flange
Thickness (FT) CPA 50E
Weight (lbs)
2" 40 2.047 3.625 0.500 0.125 0.40 80 1.919 3.625 0.500 0.125 0.39
3" 40 3.048 5.000 0.640 0.250 1.35
80 2.880 5.000 0.640 0.250 1.33
FOE Style Flange
NPS Schedule Insertion
Diameter (D) Flange
Diameter (OD) Thickness
(T) Flange
Thickness (FT) CPA 50E
Weight (lbs)
2" 40 2.047 3.625 0.310 0.125 0.40 80 1.919 3.625 0.291 0.125 0.39
3" 40 3.048 5.000 0.460 0.250 1.39 80 2.880 5.000 0.435 0.250 1.37
4" 40 4.006 6.190 0.604 0.250 2.40 80 3.806 6.190 0.574 0.250 2.32
6" 40 6.045 8.500 0.910 0.250 5.93 80 5.741 8.500 0.864 0.250 5.57
8" 40 7.941 10.620 1.197 0.375 13.06 80 7.585 10.620 1.144 0.375 11.94
10" 40 9.980 12.750 1.503 0.375 22.90 80 9.524 12.750 1.435 0.375 21.36
12" 40 11.898 15.000 1.791 0.375 36.85 80 11.336 15.000 1.706 0.375 33.94
16" 40 14.920 18.500 2.250 0.500 72.13 80 14.234 18.500 2.147 0.500 66.68
20" 40 18.734 23.000 2.822 0.750 146.33 80 17.858 23.000 2.691 0.750 136.24
24" 40 22.546 27.250 3.394 0.750 242.25 30" 40 28.420 33.750 4.275 1.000 480.81 36" 40 34.420 40.250 5.175 1.500 869.05
Canada Pipeline Accessories | 1.888.349.3569 | www.flowconditioner.com | [email protected] | March 4, 16 49
CPA 50E Type B Flow Conditioner – Full Width Wafer Style – FWO
FWO Style Flange
NPS Schedule Insertion
Diameter (D) Flange
Diameter (OD) Thickness
(T) Flange
Thickness (FT)
2" 40 2.047 3.625 0.310 0.310
80 1.919 3.625 0.291 0.291
3" 40 3.048 5.000 0.460 0.460
80 2.880 5.000 0.435 0.435
4" 40 4.006 6.190 0.604 0.604
80 3.806 6.190 0.574 0.574
6" 40 6.045 8.500 0.910 0.910
80 5.741 8.500 0.864 0.864
8" 40 7.941 10.620 1.197 1.197
80 7.585 10.620 1.144 1.144
10" 40 9.980 12.750 1.503 1.503
80 9.524 12.750 1.435 1.435
12" 40 11.898 15.000 1.791 1.791
80 11.336 15.000 1.706 1.706
16" 40 14.920 18.500 2.250 2.250
80 14.234 18.500 2.147 2.147
20" 40 18.734 23.000 2.822 2.822
80 17.858 23.000 2.691 2.691
24" 40 22.546 27.250 3.394 3.394
30" 40 28.420 33.750 4.275 4.275
36" 40 34.420 40.250 5.175 5.175
All dimensions are in inches. Please note that these are non‐stock items and are for custom order only. Sizes shown are for reference; any custom pipe size or schedule can be made. Canada Pipeline Accessories recommends a FloAlign tab to assist with centering and alignment during flow conditioner installation. Please contact CPA for more information.
Canada Pipeline Accessories | 1.888.349.3569 | www.flowconditioner.com | [email protected] | March 4, 16 50
CPA 55E/65E Type A Flow Conditioner – Raised Face – FOE
CPA 55E/65E, FOE Dimensions
NPS Schedule Insertion Flange Thickness Flange CPA 55E CPA 65E
Diameter (D) Diameter (OD) (T) Thickness (FT) Weight (lbs) Weight (lbs)
2" 40 2.047 3.620 0.673 0.125 0.52 0.47
80 1.919 3.620 0.632 0.125 0.49 0.44
3" 40 3.048 5.000 0.999 0.250 1.79 1.60
80 2.880 5.000 0.945 0.250 1.71 1.55
4" 40 4.006 6.190 1.311 0.250 3.32 2.89
80 3.806 6.190 1.246 0.250 3.11 2.75
6" 40 6.045 8.500 1.975 0.250 9.10 7.64
80 5.741 8.500 1.876 0.250 8.29 7.04
8" 40 7.941 10.620 2.599 0.375 20.24 16.90
80 7.585 10.620 2.483 0.375 18.64 15.74
10" 40 9.980 12.750 3.264 0.375 37.18 30.59
80 9.524 12.750 3.115 0.375 33.76 28.03
12" 40 11.898 15.000 3.888 0.375 61.08 49.93
80 11.336 15.000 3.705 0.375 54.89 45.23
16" 40 14.920 18.500 4.886 0.500 119.68 97.55
80 14.234 18.500 4.662 0.500 107.94 88.70
20" 40 18.734 23.000 6.128 0.750 240.73 197.05
80 17.858 23.000 5.842 0.750 217.96 180.11
24" 40 22.546 27.250 7.369 0.750 407.09 331.12
80 21.484 27.250 7.023 0.750 365.47 299.71
All dimensions are in inches. Weights calculated using 316SS. Custom sizes are available; please contact CPA for more information!
Further patents pending.
Canada Pipeline Accessories | 1.888.349.3569 | www.flowconditioner.com | [email protected] | March 4, 16 51
CPA Type C Flow Conditioner – Pin Style – TBR/TBRL
Pipe Size TBR TBRL
NPS Schedule Diameter
(D) Thickness
(T) Diameter
(D) Thickness
(T)
2" 40 2.040 0.490 2.040 1.470
2" 80 1.912 0.490 1.912 1.470
3" 40 3.038 0.460 3.038 1.380
3" 80 2.870 0.435 2.870 1.305
4" 40 3.986 0.604 3.986 1.812
4" 80 3.786 0.574 3.786 1.722
All dimensions are in inches. Custom sizes are available, please contact CPA for more information!
Further patents pending.
WARNING: Inherent to the design of pinned style flow conditioners; proper pipe ID tolerances and carefully installation must be followed. Pin style flow conditioners can still be dislodged due to impact from foreign objects or debris.
Canada Pipeline Accessories | 1.888.349.3569 | www.flowconditioner.com | [email protected] | March 4, 16 52
CPA 50E 600# Type D Flow Conditioner – Ring Type Joint Female ‐ RTJF
ANSI 600# | PN 100
Pipe Size CPA 50E
Diameter (OD) Flange
Thickness (FT) Groove
Depth (D) Groove Pitch (P)
CPA RTJ Weight (lbs)
2 4.250 1.120 0.312 3.250 3.1
3 5.750 1.250 0.312 4.875 6.3
4 6.880 1.380 0.312 5.875 9.8
6 9.500 1.750 0.312 8.312 23.7
8 11.880 2.000 0.312 10.625 42.3
10 14.000 2.250 0.312 12.750 64.4
12 16.250 2.500 0.312 15.000 96.6
16 20.000 2.880 0.312 18.500 171.2
20 25.000 3.500 0.375 23.000 328.6
24 29.500 4.120 0.438 27.250 531.9
30 36.120 4.960 0.500 33.750 950.2
36 43.000 5.840 0.562 40.250 1578.5
All dimensions are in inches. Weights calculated using 316SS. Custom sizes are available; please contact CPA for more information! CPA Ring Type Joint (RTJ) Flow Conditioners are designed to comply with ASME B16.48, ASME B16.5 and ASME B31.3.
Canada Pipeline Accessories | 1.888.349.3569 | www.flowconditioner.com | [email protected] | March 4, 16 53
CPA 50E 900# Type D Flow Conditioner – Ring Type Joint Female ‐ RTJF
ANSI 900# | PN 150
Pipe Size CPA 50E
Diameter (OD) Flange
Thickness (FT) Groove
Depth (D) Groove Pitch (P)
CPA RTJ Weight (lbs)
2 4.880 1.250 0.312 3.750 5.0
3 6.120 1.380 0.312 4.875 8.4
4 7.120 1.620 0.312 5.875 12.8
6 9.500 1.880 0.312 8.312 25.3
8 12.120 2.250 0.312 10.625 49.6
10 14.250 2.500 0.312 12.750 73.9
12 16.500 2.880 0.312 15.000 112.5
16 20.620 3.620 0.438 18.500 218.1
20 25.500 4.380 0.500 23.000 402.0
24 30.380 5.250 0.625 27.250 672.7
30 37.250 6.220 0.688 33.750 1183.4
36 44.250 7.390 0.812 40.250 1957.0
All dimensions are in inches. Weights calculated using 316SS. Custom sizes are available; please contact CPA for more information! CPA Ring Type Joint (RTJ) Flow Conditioners are designed to comply with ASME B16.48, ASME B16.5 and ASME B31.3.
Canada Pipeline Accessories | 1.888.349.3569 | www.flowconditioner.com | [email protected] | March 4, 16 54
CPA 50E 1500# Type D Flow Conditioner – Ring Type Joint Female‐ RTJF
ANSI 1500# | PN 250
Pipe Size CPA 50E
Diameter (OD) Flange
Thickness (FT) Groove
Depth (D) Groove Pitch (P)
CPA RTJ Weight (lbs)
2 4.880 1.380 0.312 3.750 5.6
3 6.620 1.750 0.312 5.375 13.2
4 7.620 1.880 0.312 6.375 17.9
6 9.750 2.380 0.375 8.312 33.5
8 12.500 2.880 0.438 10.625 65.8
10 14.620 3.250 0.438 12.750 97.0
12 17.250 4.000 0.562 15.000 161.3
16 21.500 4.880 0.688 18.500 303.0
20 26.500 5.620 0.688 23.000 534.8
24 31.250 6.620 0.812 27.250 862.4
All dimensions are in inches. Weights calculated using 316SS. Custom sizes are available; please contact CPA for more information! CPA Ring Type Joint (RTJ) Flow Conditioners are designed to comply with ASME B16.48, ASME B16.5 and ASME B31.3.
Canada Pipeline Accessories | 1.888.349.3569 | www.flowconditioner.com | [email protected] | March 4, 16 55
CPA 50E 2500# Type D Flow Conditioner – Ring Type Joint Female ‐ RTJF
ANSI 2500# | PN 420
Pipe Size CPA 50E
Diameter (OD) Flange
Thickness (FT) Groove
Depth (D) Groove Pitch (P)
CPA RTJ Weight (lbs)
2 5.250 1.620 0.312 4.000 8.0
3 6.620 2.000 0.375 5.000 14.9
4 8.000 2.500 0.438 6.188 26.1
6 11.000 3.250 0.500 9.000 61.7
8 13.380 3.880 0.562 11.000 103.5
10 16.750 4.620 0.688 13.500 192.3
12 19.500 5.250 0.688 16.000 294.1
All dimensions are in inches. Weights calculated using 316SS. Custom sizes are available; please contact CPA for more information! CPA Ring Type Joint (RTJ) Flow Conditioners are designed to comply with ASME B16.48, ASME B16.5 and ASME B31.3.
