3
Page 1 VisaLighting.com 800-788-VISA Rev: 2020/09/09 CP5724 PEEK W = Width X = Body Height D = Depth OAH = Overall Height DIMENSIONS W 26” (660 mm) OAH 4 35” (889 mm) X 26” (660 mm) D 19-3/8” (492 mm) FEATURES • Integral driver • Evenly illuminated body • RGB is DMX controlled with RDM for digital addressing • For RGB source, since the AC and DMX wiring are brought into the same J-Box, a suitable barrier must be installed to maintain separation of circuits if the DMX control signal is classified as Class 2 per NEC code. The voltage partition is provided and is intended for use only with a standard 1-1/2” deep 4x4 Octagonal electrical box, included with this product. Consult your local regulations for DMX installation requirements. • 1/16” DIA SS cable included, field adjustable • Cord is white (unless BSC is selected) • Acrylic is vacuum formed • No VOC powder coat paint finish • ETL listed for damp locations (not suited for exterior applications) RELATIVE SCALE DRAWING Type: Location: Project: OAH is the distance (in inches) from the bottom of the fixture to the ceiling plane. Example - OAH(35) indicates an overall fixture height of 35" OAH MUST BE SPECIFIED PHOTOMETRICS W X OAH D Canopy Power Cord Aircraft Cable Tube Wall and Edge Trim Ring Edge 5 Year Warranty ETL Listed Door Height = 7' Ceiling Height = 11' Silhouette Height = 6' 90˚ 60˚ 30˚ 120˚ 150˚ 180˚ VisaLighting.com/products/Peek

CP5724 PEEK - Visa Lighting Peek_SPEC.pdfCP5724 PEEK (cont.) SOURCE 1 (Select one) MVOLT fixture accepts 120 through 277 input voltage Dimmable 0-10V to 1% and minimum 80CRI, within

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: CP5724 PEEK - Visa Lighting Peek_SPEC.pdfCP5724 PEEK (cont.) SOURCE 1 (Select one) MVOLT fixture accepts 120 through 277 input voltage Dimmable 0-10V to 1% and minimum 80CRI, within

Page 1VisaLighting.com800-788-VISA

Rev: 2020/09/09

CP5724 PEEK™

W = Width X = Body Height D = Depth OAH = Overall Height

DIMENSIONS

W 26” (660 mm)OAH 4 35” (889 mm)X 26” (660 mm)D 19-3/8” (492 mm)

FEATURES

• Integral driver• Evenly illuminated body• RGB is DMX controlled with RDM for digital addressing• For RGB source, since the AC and DMX wiring are brought into the same

J-Box, a suitable barrier must be installed to maintain separation of circuits if the DMX control signal is classified as Class 2 per NEC code. The voltage partition is provided and is intended for use only with a standard 1-1/2” deep 4x4 Octagonal electrical box, included with this product. Consult your local regulations for DMX installation requirements.

• 1/16” DIA SS cable included, field adjustable• Cord is white (unless BSC is selected)• Acrylic is vacuum formed• No VOC powder coat paint finish• ETL listed for damp locations (not suited for exterior applications)

RELATIVE SCALE DRAWING

Type: Location:Project:

OAH is the distance (in inches) from the bottom of the fixture to the ceiling plane. Example - OAH(35) indicates an overall fixture height of 35"

OAH MUST BE SPECIFIED

PHOTOMETRICS

W

X

OAH

D

CanopyPowerCordAircraft

Cable

Tube Wall andEdge

Trim RingEdge

5 Year WarrantyETL Listed

Door Height = 7'Ceiling Height = 11'Silhouette Height = 6'

90˚

60˚

30˚

120˚

150˚

180˚

VisaLighting.com/products/Peek

Page 2: CP5724 PEEK - Visa Lighting Peek_SPEC.pdfCP5724 PEEK (cont.) SOURCE 1 (Select one) MVOLT fixture accepts 120 through 277 input voltage Dimmable 0-10V to 1% and minimum 80CRI, within

VisaLighting.com800-788-VISA Page 2

Rev: 2020/09/09

Fill in shaded boxes using information listed below

CP5724

MODEL

CP5724 PEEK (cont.)

SOURCE 1 (Select one)

MVOLT fixture accepts 120 through 277 input voltageDimmable 0-10V to 1% and minimum 80CRI, within 3-step MacAdam

FINISH 2AG7038BMATBRNZBSILCVBLCW9001GLIMGSILGW9002HTHRJB9005OBRZPB1035RUSTSUNGTW9016

– MVOLT

VOLTAGEMVOLT

OPTION 3BSC

OAH 4SOURCE 1L30K(L), (H)L35K(L), (H)L40K(L), (H)RGB

Source CCT Delivered Lumens Power (Watts) Voltage

L30K(L) 3000K 3500

34

MVOLT

L35K(L) 3500K 3700

L40K(L) 4000K 3700

L30K(H) 3000K 5400

53L35K(H) 3500K 5600

L40K(H) 4000K 5700

RGB 53

FINISH2 – Canopy, Trim Ring, Tube Wall and Edge (Select one)Specify color code when ordering. For accurate color matching, individual paint and finish samples are available upon request

Powder Coat Painted Finishes (Standard) See visalighting.com/finishes for all of our finishes

AG7038 Agate Grey CVBL Cove Blue GW9002 Grey White PB1035 Pearl Beige

BMAT Bronze Matte CW9001 Cream HTHR Heather RUST Rust

BRNZ Bronze GLIM Glimmer Graphite JB9005 Jet Black SUNG Sungold

BSIL Blade Silver GSIL Silver OBRZ Old Bronze TW9016 Traffic White

OPTION 3

Cord is white unless option is specified

BSC Black Suspension Cord

Page 3: CP5724 PEEK - Visa Lighting Peek_SPEC.pdfCP5724 PEEK (cont.) SOURCE 1 (Select one) MVOLT fixture accepts 120 through 277 input voltage Dimmable 0-10V to 1% and minimum 80CRI, within

Page 3VisaLighting.com800-788-VISA

Rev: 2020/09/09

This document contains information which is the property of Visa Lighting, and may not, in whole or in part, be duplicated, disclosed, or used for design or manufacturing purposes without the prior written permission of Visa Lighting. ©Visa Lighting. Design Modification Rights Reserved.

CP5724 PEEK (cont.)

PEEK PRODUCT FAMILY List as of 01/2020 – check our website for updates

See Visalighting.com/products/Peek for more information

COLOR CHANGING VARIATIONS

Voltage Partition(RGB only)

Cord Mount Voltage Partition

• CP5720 — 16” Pendant

• CP5722 — 21” Pendant

• CP5724 — 26” Pendant