CP271Pneumatic rollers

Technical data

Dimensions CP271Compaction width 2,350 mmMasses  Operating mass (incl. ROPS) 12,400 kgMass with wet sand ballast 25,500 kgMass with max. ballast 27,000 kgCompaction  Rolling width 2,350 mmTyre overlap 42 mmWheel loads, without ballast 1,370 kgWheel loads, with wet sand ballast 2,833 kgWheel loads, with max. ballast 3,000 kgTyre pressure, min 250 kPaTyre pressure, max 850 kPaTyre type (smooth) 13/80 R20Water spray system, type PressurizedWater spray system, tank capacity 415 lWater spray system, spray nozzle one per tyreBallast volume 8 m3

Traction  Transmission Clark 20000 - Power Shift to final chain driveSpeed range (km/ h) 4/9/23Engine  Manufacturer CumminsModel B4.5 TType Water cooled turbo Diesel with After CoolerFuel tank capacity 120 lRated power 99 hpRated power 74 kWRated power @ 2,200 rpmRated power (rating standard) SAE J1995Electrical system 12 VHydraulic system  Service brake Air- over- hydraulics on the 4 rear wheels. (A 2 cylindre direct mounted compressor)Parking/ Emergency brake Failsafe disc brake on outgoing shaft from transmission.

CP271Pneumatic rollers

Technical data

Dimensions CP271Compaction width 2,350 mmMasses  Operating mass (incl. ROPS) 12,400 kgMass with wet sand ballast 25,500 kgMass with max. ballast 27,000 kgCompaction  Rolling width 2,350 mmTyre overlap 42 mmWheel loads, without ballast 1,370 kgWheel loads, with wet sand ballast 2,833 kgWheel loads, with max. ballast 3,000 kgTyre pressure, min 250 kPaTyre pressure, max 850 kPaTyre type (smooth) 13/80 R20Water spray system, type PressurizedWater spray system, tank capacity 415 lWater spray system, spray nozzle one per tyreBallast volume 8 m3

Traction  Transmission Clark 20000 - Power Shift to final chain driveSpeed range (km/ h) 4/9/23Engine  Manufacturer CumminsModel B4.5 TType Water cooled turbo Diesel with After CoolerFuel tank capacity 120 lRated power 99 hpRated power 74 kWRated power @ 2,200 rpmRated power (rating standard) SAE J1995Electrical system 12 VHydraulic system  Service brake Air- over- hydraulics on the 4 rear wheels. (A 2 cylindre direct mounted compressor)Parking/ Emergency brake Failsafe disc brake on outgoing shaft from transmission.

Find your local dealer at www.dynapac.com

We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines. The above information is a general description only, all informations are supplied without liability.

cp271_en-20090609.104705.pdf 2009-06-09 10:47