Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
PRODUCT CATALOG
1-800-659-4731
www.masonpro.com
■ Wire Reinforcement ■ Mortar Color ■ Brick Veneer Anchors ■ Stone Anchors, Accessories, Shims & Tools ■ Anchors & Ties
■ Flashing (Thru-Wall) ■ Flashing (Single-Wythe) ■ Cavity Drainage ■ Weeps ■ Insulation ■ Fire Rated Masonry
Serving the Masonry Industry Since 1988!
■ Grouting & Accessories ■ Joint Material ■ Glass Block ■ Brick Cleaning ■ AVB-Air Vapor Barrier ■ Sealers
■ Dampproofing ■ Bullnoser™ ■ Material Handling ■ Levels ■ Mason Tools ■ Winter Protection
VOL. III
. PRODUCT CATALOG
Shown here with Straight & Cut Wire
-9 gauge
Toll Free: 1-800-659-4731 www.masonpro.com [email protected]
Ladder Wire Hook & Eye (Core Clear) Double eyes flush welded 16” o.c. Eye lengths are designed to span just beyond face of block or varying thicknesses of insulation.
Accommodates from 0 inch – 5 inch insulation thickness
Available in: ▪ 4”, 6”, 8”, 10”, 12”, 14” & 16” CMU Backup
Gauges: • Standard (9 gauge side rods X 9 gauge cross rods) • Heavy (3/16” side rods X 9 gauge cross rods) • Extra Heavy (3/16” side rods X 3/16” cross rods)
Available Finishes: • Mill Galvanized/Zinc Coating (ASTM A641/A641M- 0.10 oz per sq.ft.) • Hot Dip Galvanized (ASTM A153/A153-B2-1.50 oz per sq.ft.) • Stainless Steel (ASTM 580/ASTM 580M Type 304)
Ladder Wire (Core Clear) Ladder design positions cross rods at 16” o.c. on the web of the block to allow full core clearance. Available in: ▪ 4”, 6”, 8”, 10”, 12”, 14” & 16” CMU
Pintle Hooks ▪ 3/16” Dia. Wire
Standard Lengths: ▪ 3-1/4”, 4-1/4” & 5-1/4”
Seismic Pintle Hooks
A Series 6 Bags/Carton H Series 12 Bags/Carton X Series 18 Bags/Carton
Full Line of Mortar Colors Available!
Mortar Color
Ladder Wire Reinforcement
1-800-659-4731
Standard Pintle Hook
Page 2
Note: Seismic requirement for masonry veneers was removed in the 2013 Edition of the MSJC Code.
Type III X Anchor Surface mounted with prongs for rigid insulation board.
Available in: ▪ 14 gauge (standard) ▪ 12 gauge (special)
Triangular Ties: ▪ Standard 3/16” Dia. X Lengths: 3”, 4”, 5”, 6”, 7” & 9”
Insulation Thicknesses: ▪ 1”, 1-1/2”, 2”, 2-1/2” & 3”
CATALOG
Type III Surface mounted anchor ▪ Not for use with cavity insulation
Available in: ▪ 14 gauge (standard) ▪ 12 gauge (special) Triangular Ties: ▪ Standard 3/16” Dia. X Lengths: 3”, 4”, 5”, 6”, 7”, 9” & 11”
Slotted Side Mounted Stud Tie (Cavity) ▪ Shear Qualities
Available in: ▪ 16 gauge Side Mounted Plate ▪ 3/16” X Length Desired V Tie ▪ Insulation Support
Customized to Suite All Applications.
(with or without insulation)
Metal Stud Application
Triangular Ties: ▪ 3/16” Dia. X Length Desired
Metal Stud Hex Washer Head #10-14 X 1-1/2” Self Drilling TEK Polymer or Climaseal Coated w/ Neo Washer
Wood Stud Hex Washer Head #9 X 2” Climaseal Coated w/ Neo Washer
Fasteners
CMU/Concrete 1/4” X 1-1/4” Zamac Hammer Drive Anchors Tension: 1,220 lbs/Shear: 1,365 lbs
Anchor Seal Gasket
Brick Veneer on Metal Stud
(1-1/4” X 6”)
(1-1/4” X 6”)
1-800-659-4731
Seismic Tri-Ties Seismic Pintle Hooks
Finishes Available for Anchors & Ties: ▪ Mill Galvanized
▪ Hot Dip Galvanized ▪ Stainless Steel
Please call for availability
Toll Free: 1-800-659-4731 www.masonpro.com [email protected] Page 3
RJ711 Standard (w/ or w/out insulation) Surface mounted/anchor in tension.
Available in: ▪ 14 gauge (standard) ▪ 12 gauge (special) Pintle Hook Ties: ▪ Standard 3/16” Dia. X Standard Lengths: 3-1/4”, 4-1/4” & 5-1/4”
Insulation Thicknesses: ▪ 1”, 1-1/2”, 2”, 2-1/2”, 3” & 4”
RB2407 - Adjustable Veneer Anchor Surface mounted and accommodates insulation board with minimal or no puncture.
Available in: ▪ 16, 14 & 12 gauge ▪ 3/16” X Length Desired
Insulation Thicknesses: ▪ 1”, 1-1/2”, 2”, 2-1/2” & 3”
HCL711 (All available w/ prongs)
Available in: ▪ 40 mil Thick X 3” Wide w/ Self-Adhesive
- 50 lf per Roll Note: Seismic requirement for masonry veneers was removed in the 2013 Edition of the MSJC Code.
Dowels
Spring Loaded Dowels Stainless Steel Dowels
Available in: ▪ 3/8” Dia. X Length ▪ Stock Lengths: 3”, 4”, 6” & 8” Other Sizes Available
. PRODUCT CATALOG
–––––––
Stone Shims & Tools
Plastic Horseshoe Shims
Used to shim stone anchors.
Available in: ▪ 1/16”, 1/8”, 1/4”& 3/8” w/ 1/2” Opening
High Density Stone Shims Used to set stone.
Available in: ▪ Standard: 2” X 2” ▪ Thickness: 1/16”, 1/8”, 1/4”, 3/8” & 1/2” Custom Sizes Available
Stone Anchors (Stainless Steel)
‘L’ Anchors ▪ 1/8” X 1-1/4” X 2” X Length Stock Lengths: 2”, 3”, 4”, 5” & 6” Other Sizes Available Split Tail Anchors ▪ 1/8” X 1-1/4” X 2” X Length X 3/4” Split-Tail Stock Lengths: 1-1/2”, 2”, 2-1/2”, 3”, 3-1/2”, 4”, 4-1/2”, 5” & 5-1/2” Other Sizes Available
‘Z’ Bend Anchors ▪ 1/8” X 1-1/4” X 2” X Length X 3/4” Bend Stock Lengths: 1-1/2”, 2”, 2-1/2”, 3”, 3-1/2”, 4”, 4-1/2”, 5” & 5-1/2” Other Sizes Available
Expansion Pins – Stainless Steel CMU/Concrete Applications
▪ 1/4” X 1-1/4” Zamac Hammer Drive Anchor w/ Stainless Steel Nail Tension: 1,220 lbs/Shear: 1,365 lbs
▪ #10 Metal Screw w/ Neoprene Washer Polymer or Climaseal Coated
▪ #9 Wood Screw w/ Neoprene Washer Climaseal Coated
Stone Lifting Clamps ▪ ¾ Ton (Lift 1500 lbs) - Opening 3” ▪ 1 Ton (Lift 2000 lbs) - Opening 5” ▪ 2 Ton (Lift 4000 lbs) - Opening 8-3/4”
Carbide Tip Chisels ▪ 2” Offset ▪ 2” Tracer ▪ 2” & 3” Handset Other Types & Sizes Available
Toll Free: 1-800-659-4731 www.masonpro.com [email protected]
Stone Anchors & Accessories 1-800-659-4731
Page 4
M-1 Structural Sealant/Filler Anchor sealer/filler for limestone and cast stone anchor connections.
Available in: ▪ 10.1 fl. oz. Tubes
Mesh Ties Tie masonry to masonry for non-bearing/ non-shear intersecting perpendicular CMU walls.
Available in: ▪ 16 gauge ▪ 1/2” sq X 6” X 14”
Finish: ▪ Hot Dip
. CATALOG
Notched Column Anchors Tie CMU to vertical steel columns. Corrugated Type
▪ 1-1/2” X 1/8” X 7” Corrugated (Right or Left) L-Anchors (Bend Type)
▪ 1-1/2” X 1/8” X 7” w/ 1-1/2” Bend (Right & Left)
Toll Free: 1-800-659-4731 www.masonpro.com [email protected]
Weld On Tie masonry to steel columns.
Available in: ▪ 1/4” Dia. X 9” Long
Triangular Ties
Available in: ▪ 3/16” Dia. X Length ▪ Standard Lengths: 3”, 4”, 5”, 6”, 7”, 9” & 11”
Partition Top Anchors (PTA) Provide lateral shear resistance at top of wall.
Channel Slot/Anchors
Column Anchors/Dovetail Ties
Finishes Available for Anchors & Ties: ▪ Mill Galvanized
▪ Hot Dip Galvanized ▪ Stainless Steel
Please call for availability 1-800-659-4731
Page 5
Z Bars Anchor masonry to masonry for intersecting perpendicular CMU shear walls.
Available in: (Standard) ▪ 1/4” X 1-1/4” X 8” w/ 2” Bends ▪ 1/4” X 1-1/4” X 12” w/ 2” Bends ▪ 1/4” X 1-1/2” X 24” w/ 2” Bends - CODE SIZE! Other sizes available!
Finish: ▪ Brite (Plain) ▪ Hot Dip
Anchors and Ties
Control Joint Anchor
Dovetail Tri-Ties Embedded into slot/anchor in tension. (Non Cavity & Cavity)
Available in: ▪ 12 gauge X 3/16” Dia. x Length Attached Tri-Ties ▪ Standard Tri-Tie Lengths: 3-1/2”, 4-1/2”, 5-1/2” & 7-1/2”
Dovetail Slot Tie veneer to a poured concrete wall.
Available in: ▪ 24 gauge X 10’ w/ Foam Filler
FERO Fast System
Adjustable Relief Angle Support
Available in: ▪ 1-1/2”, 2-1/2”, 3-1/2” & 4-1/2” Legs w/ Shim (Right or Left)
FERO Break-Away Fire-Release Connectors Maintain Firewall Integrity – Extend Fire Escape Times
Available in: ▪ Assortment of Sizes & Configurations
▪ Mill Galv. 1/8” X 1-1/4” w/ 5/16” Dia. Holes 16” o.c. ▪ PVC 1/8” X 1-1/8” w/ 5/16” Dia. Holes 8” o.c. ▪ Stainless Steel 1/8” X 1” w/ 5/16” Dia. Holes 16” o.c. ▪ Aluminum 1/8” X 1” with 5/16” Dia. Holes 16” oc. ▪ 1/4” X 1-1/4” Zamac Hammer Drive Anchor (CMU/Concrete) ▪ #10 X 1-1/2” HWH Tek Screw Polymer or Climaseal Coated w/ Neoprene Washer (Metal Stud) ▪ #9 X 2” Hex Washer Head Climaseal Coated w/ Neoprene Washer (Wood Stud)
. PRODUCT CATALOG
HYLOAD - 40 Mil Cloaked Flashing ▪ 12”, 16”, 18”, 24” & 36” X 75’ Rolls ▪ End Dams ▪ Corners
Perm-A-Barrier® ▪ 12”, 18”, 24” & 36” Wide X 75’ Rolls
▪ Bituthene Mastic – Quart Tubes
▪ Surface Conditioner – 1 Gallon
Copper Fabric / Coated Flashing ▪ 3 oz, 5 oz & 7 oz ▪ 12”, 16”, 18”, 24” or 36” Wide X 25’ Long
Copper Mastic ▪ Quart Tubes ▪ 5 Gallon Pails
40 Mil EPDM ▪ 12”, 16”, 18”, 24” & 36” X 50’ Rolls ▪ End Dams (Right & Left) ▪ Corners
▪ Seam Tape – Two Sided 50’
▪ Sealant – 10 oz. Tubes
Stainless Steel Flashing
▪ FS1010 - 28 gauge 3” X 1/2” Hem (10’ pcs)
▪ FS1012 - 26 gauge 3” X 3/8” Hem (8’ pcs)
Toll Free: 1-800-659-4731 www.masonpro.com [email protected]
Lap Rite™ Metal Flashing Lap Sealant Non-Skinning Butyl Sealant
Available in: ▪ 10 oz. Tubes
Cheney Flashing ▪ Dovetail, Sawtooth & 3-Way
Other Profiles & Custom Fabrications Available! 3/8” or
1/2” Hem
Flashing – Thru-Wall
Termination Bar
Metal Flashing
3”
1-800-659-4731
Page 6
Self Adhering Stainless Steel Flashing ▪ Widths: 4”, 6”, 9”, 12”, 18”, 24” & 36” Rolls ▪ Lengths: 20’ & 50’ Custom sizes upon request
40 mil Self-Adhering Flashing Membrane ▪ 12”, 18”, 24”, 36” x 75’ Rolls
Stainless Steel Fabric Flashing ▪ 12”, 18”, 24”, 36” x 60’ Rolls
▪ 12”, 16”, 18”, 24”, 36” x 60’ Rolls ▪ 3oz., 5 oz. & 7 oz.
500 Copper
Corners & End Dams
PRODUCT CATALOG
Available in: ▪ 2-1/2” X 3-1/2” X 1/2” Thickness
Colors: Gray, White, Brown, Tan, Almond & Red
Weep Tube w/ Cotton Wick
Available in: ▪ 3/8” O.D. X 1/4” I.D. X 4”
Weep Tube w/ Stainless Steel Screen & Cotton Wick
Available in: ▪ 3/8” O.D. X 1/4” I.D. X 4”
Goodco Vents – Gray
Available in: ▪ Standard (Modular) ▪ Jumbo
Cell Vents
Available in:
▪ .4”
▪ 1”
▪ 2”
Single-Wythe CMU Flashing - 2 per Block (Includes Drainage Matte and Weep Screen)
Available for: ▪ 8” CMU ▪ 10” CMU ▪ 12” CMU
Cavity Drainage
Weeps
Available in:
▪ .4”
▪ 1”
▪ 2” (1.5”)
Clear Rectangular Weep Rests directly on the thru-wall flashing.
Available in: ▪ 3/8” X 1-1/2” X 3-1/2” Long
100% Cotton Tiger Sash Wicks moisture from the cavity to the exterior.
Available in: ▪ 1/4” Dia. X 100’ Hank
1-800-659-4731 Flashing – Single Wythe
Toll Free: 1-800-659-4731 www.masonpro.com [email protected]
Weeps
Page 7
Available in:
▪ .4”
▪ 1”
▪ 2”
DT
- .25” Creates a drainage/ventilation cavity environment behind natural and manufactured stone veneer walls.
Available in: ▪ 39” x 61.5’ Rolls (200 sq. ft.)
Available in: ▪ Standard: 3/8” X 2-5/8” X 3” ▪ Utility: 3/8” X 3-5/8” X 4”
Colors: ▪ Clear, Gray, Tan, other colors avail
MASONPRO, Inc. PRODUCT CATALOG
Extruded Polystyrene Cavity Wall Insulation
CAVITYMATE™
Available in: (Pre-cut 16” pieces) ▪ 1”, 1-1/2”, 2” & 3” CAVITYMATE™ Plus
Available in: (Pre-cut 16” pieces) ▪ 1”, 1-1/2”, 2” & 3”
CAVITYMATE™ Ultra
Available in: (Pre-cut 16” pieces) ▪ 1-3/4”, 2-1/8”, 2-1/2” & 3”
SM/SB (Below Grade)
Available in: (48” & 96” Sheets - scored 16” & 24”) ▪ 1”, 1-1/2”, 2”, 2-1/2” & 3”
PL® 300 Adhesive/Sealant (For Rigid Insulation)
Available in: ▪ Quart Tubes
Toll Free: 1-800-659-4731 www.masonpro.com [email protected]
Insulation Seam Tape Performs well as a seam tape on extruded foam products such as Styrofoam.
Available in: ▪ 1-7/8” X 216’ Rolls
Insulation 1-800-659-4731
Great Stuff Pro™ Seams, Gaps & Cracks Fire Rated Insulating Foam Sealant Available in: ▪ 24 oz. Cans
Zonolite® - Vermiculite Loose Fill Insulation
Available in: ▪ 4 cu ft Bags Palletized, Plastic Wrapped & Weather Capped
Page 8
Aluminum Foil Insulation Tape Strong and durable, cover seams.
Available in: ▪ 3” x 150’ Rolls
Weathermate™ Flashing Tape Air, vapor and moisture tape for insulation seams, joints, corners, jambs & misc terminations.
Available in: ▪ 4”, 6” & 9” X 100’ Rolls
Fire Rated Masonry
EnergyShield® (Double Foil Faced) A rigid polyiso-foam board insulation with a triplex facer (foil-kraft-foil) on the topside and a triplex facer (foil-kraft-foil) on the unprinted back side.
Available in: (4’ X 8’ or Cavity Cut 16” Wide) ▪ 1-1/2”, 2”, 2-1/2” & 3”
Fire Rated Cavity Insulation
RainBarrier® 45
Available in: ▪ From 1″, 1-1/2″, 2″, 2-1/2″, 3″, 3-1/2″, 4″ and Custom Thicknesses
RainBarrier® 45 Insulation Clips Mechanically secures RainBarrier 45 insulation to brick ties & adj. wire.
Top of Wall Safing Mineral wool forming material for use in firestop applications such as floor and wall penetrations and head of wall construction joints.
Available in: ▪ 4” X 24” X 48” (40 sf Bundle)
Thermax™ (Double Foil Faced)
Non-structural, rigid board insulation consisting of a glassfiber- reinforced polyisocyanurate foam core laminated between 1.0 mil smooth, reflective aluminum foil facers on both sides.
Available in: (4’ X 8’ or Cavity Cut 16” Wide) ▪ 1-1/2”, 2”, 2-1/2” & 3”
Expansion Joints (EJ)
▪ #1056 - 3/8” X 3” Plain Neoprene Other Sizes Available ▪ Emseal Colorseal for Joint (Special Order) 1/2” to 8” Wide Joint Openings
. PRODUCT CATALOG
▪ Does not interfere with wire placement. ▪ Code centered rebar. ▪ All 9 gauge
Available in: Single: ▪ 8”, 10”, 12” 14” & 16” Double: ▪ 8”, 10”, 12”, 14” & 16”
Bond Beam: ▪ 8” & 12”
Toll Free: 1-800-659-4731 www.masonpro.com [email protected]
Relief Angle Compression Joint
▪ #1056 - 1/4” X 3” Plain w/Self Adhesive Other Sizes Available
Block Control Joints (CJ)
▪ PVC Standard Control Joint (Sash)
▪ Rubber Standard Control Joint (Sash)
Column Wrap
Available in: ▪ 1/4” Roll (48” X 250’)
Perforated Sheets Available
Core Lock Rebar Positioners
Grout Stop™ Creates a barrier that stops the flow of grout when filling block wall cells while maintaining positive bond in the mortar joint.
Available in: ▪ 6” for 8” CMU X 100’ Rolls ▪ 8” for 10” CMU X 100’ Rolls ▪ 10” for 12” CMU X 100’ Rolls
Smart T-Bolt System Used to form clean-out covers for high lift grouting.
Glass Block Spacers
Glass Block Wire
Panel Anchors
Glass Block
Joint Material
Grouting & Accessories 1-800-659-4731
Scoop, Pass, Pour
Grout Grunt™
Page 9
Grout Pump GP-2HD Standard Hose Size: 1-1/2” ID by 60” long, Clear Vinyl ▪ Optional 3/4" hose reducer kit
Standard and ‘T’
Window Protection Self adhering film temporarily protects glass windows and frames from mortar droppings and during cleaning.
Available in: ▪ 24” X 600’ Rolls
MASONPRO Inc. PRODUCT CATALOG
Toll Free: 1-800-659-4731 www.masonpro.com [email protected]
Available in: ▪ 1 & 5 Gallon Pails
Cleaning Tools ▪ Plastic Block Acid Brush
▪ Nylon Tip 48” Threaded Handle ▪ 3” Stiff Scraper Stl/Stl Blade
Wall Scrapers
Available in: ▪ 4” & 7” Wide ▪ 72” Tapered Wood Handle
MasterSeal 615/700B Semi-Mastic (Brush or Spray) Cold-applied water-based emulsified-asphalt dampproofing and vapor-retarding coating for use on “green” or slightly damp surfaces.
Available in: ▪ 5 Gallon Pails
▪ Weather Seal Siloxane WB Concentrate
▪ Prime-A-Pell 200
▪ Chemprobe Phylon 1422
Brick Cleaning
Heavy Duty w/ Wood Handle
Available in: ▪ 14” & 22”
Floor Scrapers
Rubbing Pads Semi rigid, porous, polyethelene foam brick.
Available in: ▪ 2” X 4” X 8” Fluted Rubbing Stones 20 grit silicon carbide surface. Cleans recently laid CMU walls.
Available in: ▪ 8” X 2” X 2”
CMU Wall Sander ▪ 6’ Standard Handle Replacement Discs Also Available
Wall Cleaning
600 Detergent Vana Trol Custom Masonry Cleaner
Before After
1-800-659-4731
Page 10
AVB – Air Vapor Barrier
▪ VB (Vapor Barrier)
▪ Spray Wrap MVP
▪ Fast Flash
▪ Joint & Seam Filler
Wall Membrane (Above Grade) Self-adhesive, rubberized asphalt/polyethylene membrane for air & vapor barrier applications.
Available in: ▪ 36” X 75’ Rolls
30 Day UV Protection!
Perm-A-Barrier Adhesive & WB Primer (DensGlass Gold & Misc. Surfaces)
Available in: ▪ 5 Gallon Pails
Sealers Dampproofing
Perm-A-Barrier® NPL A fluid applied, one component, latex-based membrane that cures to form a resilient, monolithic, fully-bonded elastomeric sheet when applied to construction surfaces.
Available in: ▪ 5 Gallon Pails
S100 Sealant Durable and flexible building sealant.
Available in: ▪ 29 oz Cartridges
Perm-A-Barrier® VPL A fire-resistive, one component, fluid-applied vapor permeable air barrier membrane that protects building envelope from air leakage and rain penetration, but allow the walls to "breathe".
Available in: ▪ 5 Gallon Pails & 52 Gallon Drums
v
. PRODUCT CATALOG
Heavy Duty Mortar Tubs 10 cu.ft. Skidded Tub (22” X 56” X 22”)
Heavy Duty Rolling Mortar Tubs ▪ Holds 7 cu.ft.
▪ Plastic Mortar Board ▪ Mortar Board Stand
Plastic Stretch Wrap 90 Gauge Heavy Duty Wrap brick, block & equip.
Available in: ▪ 18” X 1500’ Rolls
Heavy Duty Brick Tongs
Toll Free: 1-800-659-4731 www.masonpro.com [email protected]
▪ 1 piece diamond router bit/profile wheel ▪ Wet or dry for use on your 4” grinder with
a 5/8”-11w threaded arbor
CMU Corner Router 1” Radius Diamond Router Wheel
Diamond Blades For general purpose cutting of
block, brick and cured concrete.
20” General Purpose Blade
Smith Levels Color & Clear Vials
Available in: ▪ 18”, 24”, 42” & 48”
Smith Level Repair Kit
1-800-659-4731
Scoop, Pass, Pour
Grout Grunt™
Page 11
3/8” Sandwich Tuck Pointing Blade Removes old mortar joints
12” & 14”
4.5”
Rebar Caps
▪ Flat Safety Caps OSHA Approved!
Material Handling
Blades/Routers Safety
Scaffolding Ties
Available in: ▪ 5” & 9”
Levels & Accessories
German Line Pin
“GATOR” 14” Fast Aggressive
General Purpose Blade
“PIRANHA” 14” High Performance
Block Blade
“SHARK” 14” Premium
“Cut-All” Diamond Blade
CMU Wall Sander ▪ 6’ Standard Handle Replacement Discs Also Available
. PRODUCT CATALOG
Toll Free: 1-800-659-4731 www.masonpro.com [email protected]
Winter Admixtures
Morset
Available in: ▪ 3.5 Gallon Pails
Building Enclosure
Reinforced Heavy Duty Poly Sheets
Standard Sizes: ▪ 20’ X 100’ Sheet - Heavy Duty
▪ 32’ X 100’ Sheet - Heavy Duty
▪ 40’ X 100’ Sheet - Heavy Duty
Custom Sizes Available- (Allow Lead Time)
▪ Fire-Retardant Also Available
PVC Wind Clips
Available in: ▪ 11” Long
Electric Blankets (Sand Pile) ▪ 9’ X 9’ 110 Volt ▪ 9’ X 15’ 110 Volt
Propane Torch ▪ 500,000 BTU’s
Volcano Rod™ Electric Sand Pile Heating System ▪ 120 Volt/1500 Watts - Stainless Steel
Winter Protection
Corner Pole L Bracket Sturdy, adjustable, 1/4” thick steel angle corner bracket with 5/16” diameter holes punched 1” on center. Simplify corner pole setting improving bricklayer productivity.
Available in: ▪ Steel ▪ Lightweight Aluminum
Available Size: ▪ 1/4” X 1-1/4” X 8” X 24”
Speed Pole Post Speed Lead (I/S, O/S) Corner System
Set Includes: ▪ Two 8’ aluminum poles ▪ Two brackets ▪ Six line clips ▪ Two swivel blocks
Pointing Tools
Quikpoint Mortar Gun Model 2064 w/Drill & Accessories
DryFix Stainless Steel Masonry Repair System
▪ Sized to suit
Stabilize Existing Veneers!
1-800-659-4731
Insul-Blanket™
Standard Sizes: ▪ 1/2" X 6’ X 25’ ▪ 1/2" X 12’ X 25’
Grout Bags
Restoration