1

Course Structure & Scheme

For

Master of Technology

In

Fashion Technology (Functional Garments)

(w.e.f. session 2012-2013)

BPS Mahila Vishwavidyalaya Khanpur Kalan, Sonepat (India)

www.bpswomenuniversity.ac.in

2

School of Engineering & Sciences

B P S Mahila Vishwavidyalaya, Khanpur Kalan (Sonepat)

(State University Established Under the Legislative Act No 31/2006)

Course Curriculum & Scheme of Examination

for

M.Tech. Fashion Technology (Functional Garments)

(w.e.f. session 2012-13)

The Master of Technology in Fashion Technology (Functional Garments) is a two year full time programme. The course structure of the programme is given under:-

Semester I

Hrs/Week Marks S. No

Code Course Title L T P

Total Credit Internal

Marks External Marks

Total Marks

Theory 1. FTL-2601 Fashion Concepts 3 2 - 4 50 50 100 2. FTL-2603 High performance Fibres 3 2 - 4 50 50 100

3. FTL-2605 Apparel Testing and

Quality Characterisation 3 2 - 4 50 50 100

4. FTL-2607 Functional Textile and

Garments – I 3 2 - 4 50 50 100

Lab

6. FTP-2609 Garment Development

Lab-I - - 2 1 25 25 50

7. FTP-2611 Textile and Apparel

Testing Lab - - 2 1 25 25 50

8 FTP-2613 Independent Study - - 2 2 50 - 50 Total 12 08 06 20 300 250 550 Total Contact Hours: 26 Total Credit: 20

Note: Minimum passing marks for each paper is 50%.

3

Semester II

Hrs/Week Marks S.

No

Code Course Title L T P

Total Credit Internal

Marks External Marks

Total Marks

Theory

1. FTL-2602 Advances in Apparel

Technology 3 2 - 4 50 50 100

2. FTL-2604 Functional Textiles and

Garments –II 3 2 - 4 50 50 100

3. FTL-2606 Functional Finishes of

Garments 3 2 - 4 50 50 100

4. FTL-2608 Or FTL-2610

Elective-I 3 2 - 4 50 50 100

Lab 6. FTP-2612 Software Packages Lab - - 2 1 25 25 50

7. FTP-2614 Garment Development

Lab-II - - 2 1 25 25 50

8 FTP-2616 Independent Study - - 2 2 50 - 50 Total 12 08 06 20 300 250 550 Total Contact Hours: 26 Total Credit: 20 Elective-I

1. FTL-2608: Fabrics Properties and Textile Designing 2. FTL-2610: Structure and Properties of Fibres

Note: Minimum passing marks for each paper is 50%.

4

Semester III

Hrs/Week Marks S. No

Code Course Title L T P

Total Credit Internal

Marks External Marks

Total Marks

Theory

1. FTL-2615 Managing the Supply

chain 3 2 - 4 50 50 100

2. FTL-2617 or FTL-2619

Elective- II 3 2 - 4 50 50 100

Lab/ Disssetation 3. FTP-2621 Research Project Writing - - 4 4 100 - 100 4. FTP-2623 Seminar - - 2 2 100 - 100

5. FTP-2625 Dissertation Phase-I (to be

contd. in IV Sem.) - - 4 4 50 50 100

6. FTP-2627 Independent Study - - 3 3 100 - 100 Total 06 04 13 21 450 150 600

Total Contact Hours: 23 Total Credit: 21

Review article to be submitted on the basis of literature survey followed by a seminar clearly stating the objectives and the methodology to be opted to achieve the objectives of dissertation phase-I.

Elective-II 1. FTL-2617: Design of Experiments 2. FTL-2619: Intellectual Property Rights

Semester IV

Hrs/Week Marks S. No

Code Course Title L T P

Total Credit Internal

Marks External Marks

Total Marks

Theory

1. FTP-2620 Dissertation Phase-II* (to

be contd. from III sem.) 4 - 16 20 250 250 500

2. FTP-2622 Seminar and Progress

Report 3 2 - 4 100 - 100

Total 7 2 16 24 350 250 600 Total Credit: 20

Note: Minimum passing marks for each paper is 50%. *A student will be allowed to submit M. Tech. Thesis (Dissertation) only after presenting their work at departmental level or national/international conference or accepted/ published paper in a refereed journal. A proof for the same is to be submitted by each student. Note: 1. Candidates may be permitted to do their dissertation work in industry and other approved organization if

required by the supervisor and head of the department.

5

2. There will be term end semester examination of 3 hours duration in each theory based subject. 3. The choice of students for any elective shall not be binding on the department to offer it. The department

may also offer any other elective subject with the consent of Course coordinator/ Faculty. 4. The student will have to present the progress of the dissertation work through seminars and progress

report. A report must be submitted to the department for evaluation purpose at the end of the semester in a specified format.

5. Independent study/ term paper and seminar will have Internal University Examination by departmental board of panel.

Note:

(1) Each course in Fashion Technology of 4 Credit is of 100 marks having 50 internal and 50 external marks.

(2) Each lab in scheme of Fashion Technology of 2 Credit is of 50 marks having 25 internal and 25 external marks.

(3) Dissertation phase-I, Dissertation phase-II and independent study load will be counted as two hours per week for each concerned faculty.

Grand Total of Credits for the M.Tech. Fashion Technology (Functional Garments), SES

S.No Semester Credits Marks 1. I 20 550 2. II 20 550 3. III 21 600 4. IV 24 600

Total 85 2300 All end examinations (Theory & Practical) are of three hours duration

6

Master of Technology In Fashion Technology (Functional Garments) SEMESTER-I

FTL-2601 Fashion Concepts L T P Credits 3 2 0 4 Duration of Exam: 3 hrs

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100 Unit 1: Fashion terminology, cycle, influence, fashion: Introduction to fashion and apparel design. Origin of fashion, concept, analysis, trends and creations. Fashion Theories: Fashion of different eras. fashion promotion, style-fad-trends. Unit 2: Fashion Design fundamentals: Basic concept of design, elements of art, of design: Definition of line shape, form size, space, texture and colour. Structural and decorative dress designing, creating varieties through designs. Principles of Design: Definition Harmony, Proportion, Balance, Rhythm, Emphasis, meaning types and application on apparel psychology of clothing. Unit 3: Introduction to colours and their theories. Colour harmony and colour contrast, modification of colours. Principle of colour measurement. Effect of colours on garment construction. Arrangement of figures such as unit repeating design, the drop device, drop reverse design, etc. Unit 4: Anatomy for designers: Effect of Human proportion and figure construction on garment construction. Methods of determining individual proportions. Aesthetic requirement of dress, sensory factors affecting aesthetics. Display of fashsion materials: Definition and importance, source techniques and window display, classic fashion shows. Important fashion centers of the world and India. Suggested Text Books & References: 1. Erwin Model, “Clothing for Moderns”, Mac Millan Publications, New York 2. Tate and Sharon Lee, “Inside fashion design”, harper Publication Inc., U.Kng NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit.

7

FTL-2603 High Performance Fibres L T P Credits 3 2 0 4 Duration of Exam: 3 hrs

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100 Unit 1 Introduction to fibres, their classification, important fibre properties. Natural fibres such as cotton, jute, wool, silk, etc., physical and chemical properties with applications. Advancement in production/cultivation of natural fibres such as BT cotton and their impact on ecology. Unit 2 General definition of man made or manufactured fibres, introduction to general principles of spinning and spinning processes. Basic principles of fibre spinning, Spinning processes: Melt spinning. High speed spinning, spinning of microfibre, solution spinning process: Dry and wet spinning. Manufacture and specifications of raw materials and monomers. Heat-setting of fibres. Unit 3 Regenerated fibres: Viscose, Liocel, high tenacity regenerated fibres, regenerated protein fibres, their methods of manufacture, physical & chemical properties and applications. Synthetic fibres: nylon 6 and 66, PET, PAN, their methods of manufacture, physical & chemical properties and applications. Unit 4 High performance fibres: Introduction to PU, PTFE, Aramide, carbon fibre, etc. their methods of manufacture, physical & chemical properties and applications. Brief idea on microdenier, bicomponent, hollow fibres and other developments in fibres. Suggested Text Books & References: 1. Vaidya A A, “Production of Synthetic Fibres”, 1st Ed., Prentice Hall of India, New Delhi,1988. 2. Gupta V B and Kothari V K, “Manufactured Fibre Technology”, 1st Ed., Chapman and Hall, London, 1997 3. Mark H F, Atlas S M and Cernia E, “Man Made Fibre Science and Technology”, Vol. 1, 2, 3, 1st Ed., Willey Inter Science Publishers, New York, 1967. 4. Macintyre J E, “Synthetic Fibres”, Woodhead Fibre Science Series, UK, 2003. 5. Fourne F, “Synthetic Fibres: Machines and Equipment, Manufacture, Properties”, Hanser Publisher, Munich, 1999. NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit.

8

FTL-2605 Apparel Testing and Quality Characterisation L T P Credits 3 2 0 4 Duration of Exam: 3 hrs

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100 Unit – I Introduction: Aim and scope of testing, Sample and Population, Sampling techniques. Fibre, yarn and fabric testing concepts, instruments and applications.

Fabric comfort properties: water-vapour transmission through fabrics, Wicking properties, Air permeability and wettability. Fabric composition testing, fabric chemical testing. Unit – II

Overview of low stress mechanical properties, FAST, Kawabatta Evaluation System. Analysis of KES, FAST data. Garment testing concepts, instruments and applications: dimensions, seam strength, seam slippage, adhesion between interlining and fabric, shrinkage, zippers, buttons, snap fasteners and other general garment properties. Needle cutting/yarn severance.

Unit – III

Testing of specially designed fabrics and finishes: Flame resistance, Water repellency, etc. Computer colour matching: concept of colour measurement and applications. Different fastness (light, washing, perspiration, sublimation, chlorine, etc.) properties and their evaluation. Unit – IV International quality parameters and various standards such as AATCC, SDC, ASTM, etc. Salient features of different testing protocols for apparels, various essential standards and regulations associated with quality evaluation of apparels, safety aspects of childern’s apparel, quality program of clothing sector, the role of retailer, agent, vendor and laboratory. Suggested Text Books & References: 1. Physical Testing of Textiles, Woodhead Publishing Ltd, Cambridge, 2002. Saville B P 2. Testing and Quality Management, Ed. V. K. Kothari, IAFL Publications, New Delhi, 1999, V. K. Kothari. 3. Principles of Textile Testing”, CBS Publishers and Distributors, New Delhi, 1999, Booth J E. 4. Textile Testing, SSM Institute of Textile Technology, Angappan P & Gopalakrishnan R,Komarapalayam, 2002. 5. Apparel quality Control, V.K. Mehta 6. Basu A, “Textile Testing”, SITRA Coimbatore, 2002. NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit.

9

FTL-2607 Functional Textiles & Garments – I L T P Credits 3 2 0 4 Duration of Exam: 3 hrs

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100 UNIT 1: Introduction to functional garment and their applications. Medical Textiles: application of various polymers and textile materials in medical field such as artificial tandem and alignments, kidney, heart, surgical product, cardiovascular graft, sterilization, wound care, etc. UNIT 2: Nanotechnology in apparels - Introduction and Definition of Nanotechnology. Understanding Nanotechnology. Nanotechnology and Todays’s World. Use of nanotechnology in the field of fibres and polymers and their application in apparels. Latest developments of nanomaterials in garment sectors. UNIT 3: Protective clothing - Brief idea about different type of protective clothing, General requirement of protective clothing, cut resistant fabric, chemical protective clothing (CPC) - Areas of use, CPC items for air-born, liquid hazard, different chemicals used, parts of CPC, performance evaluation – permeation, solubility and diffusion theory, barrier effectiveness, structural integrity, water proof breathable fabrics. UNIT 4: Ballistic Protective clothing – Requirements, principle of mechanism, different fibres and fabrics, soft and hard armor, factors influencing performance. Thermal Protective Clothing (TPC)– Combustion mechanism, fire governing parameters, Requirements, Designing of TPC, Construction, various parameters affecting flame retardency, performance evaluation, Pesticide Protective Clothing – Requirements of protective clothing, different areas, different parts of PPC, Performance evaluation of PPC Suggested Text Books & References:

1. Textiles in sport, Edited by R Shishoo, Woodhead Publisher. 2. Wearable electronics and photonics, Edited by X M Tao, Woodhead Publisher. 3. Wellington Sears handbook of Industrial Textiles, S Adanur, Woodhead Publisher 4. Handbook of technical textiles, Edited by A R Horrocks and S C Anand, UK. 5. Nanofibres and nanotechnology in textiles, Edited by P Brown and K Stevens, Woodhead Publisher. 6. Nanofunctional textiles and their application, Edited by Y Li, Woodhead Publisher. 7. Smart textile for medical and healthcare, Edited by L Van Langenhove, Woodhead Publisher.

NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit. FTP-2609 Garment Development Lab-I L T P Credit 0 0 2 1

10

Introduction and application of different aids, tools and equipment required in garment construction. Flat pattern technique: drafting, developing pattern. Drafting of child basic and adult bodic blocks. Drafting of collars and sleeves. Preparation and construction of different types of seams, necklines, plackets, pockets, pleats and tucks. Dart manipulation and their applications. FTP-2611 Textile and Apparel Testing Lab L T P Credit 0 0 2 1 Applications of chemicals, dyes and functional finishes to make speciality garments and their evaluation. Fabric composition testing. Fabric shrinkage, Air-permeability, Limited Oxygen Index (LOI), flammability test, Water absorbency, Water repellency, Hydrostatic water proof test, Abrasion Resistance: flat and flex, Pilling resistance. Fabric composition testing, fabric chemical testing, testing for fabric comfort Determination light, washing, perspiration, sublimation, chlorine, etc. fastness properties of dyed samples. Seam strength, Seam Slippage, Adhesion between interlining and fabric, shrinkage, zippers, buttons, snap fasteners and other general garment properties.

FTP-2613 Independent Study L T P Credits 0 0 2 2 Student has to study the particular topic as per their interest/ requirement of the project or suggested by the faculty under supervision.

11

SEMESTER-II

FTL-2602 Advances in Apparel Technology L T P Credits 3 2 0 4 Duration of Exam: 3 hrs

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100 Unit – I Innovation in seams, stitches, sewing thread, needles, marker, planning and cutting technology. Unit – II Understanding the need and use of various construction types for sewing machinery in regards to quality and performance improvement and ease to operate, Advancement in sewing Machinery: Directive for operating special purpose sewing machinery. Various bed types of machine and their applications in manufacturing processes: Flat Bed, large area Raised Bed, DNLS m/c, Over Lock m/c, Flat Lock m/c, Multi thread Chain Stitch m/c, Blind stitch machine and their developments. Unit – III Various types of feed mechanisms, their suitability for different fabrics and construction of components and their contribution towards quality and productivity. Application of programmable machines in garment industries. Developments and automation in garment manufacturing machines and industries. Unit – IV Scientific approach in sewing techniques. Ergonomic concepts and application in the sewing room, Introduction of time targets and quality aspects, Practical approach to achieve targets, Understanding of different shaped sewing lines in actual garments, Material Handling, Postural Techniques, Work Study, Working Time Arrangement, Shift Work, Motion Economy, anthropometric, Basic Sewing Patterns, Convex sewing pattern, Curved sewing pattern, Angular sewing pattern, etc Suggested Text Books & References:

1. Knitted Clothing Technology, Brackenburry

2. The Technology of Clothing Manufacture, Harold Carr,Barbara Latham 3. Introduction to Clothing Manufacture, Gerry Cooklin NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit.

12

FTL-2604 Functional Textiles & Garments –II L T P Credits 3 2 0 4

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100 UNIT 1: Definition of smart and intelligent textiles. Passive and active functionality. Extreme winter clothing with low heat transmission, heat absorbing, heat storing systems, phase change materials, incorporation of PCMs in fibres and fabrics. Breathable textile. UNIT 2: Environmentally sensitive textiles – photochromic and thermochromic (Chameleonic) fabrics, camouflage (radar shielding) fabrics, variable heat absorption surfaces, stimuli sensitive polymers such as temperature, pH, ionic, magnetic sensitive materials, design and their applications to textile. UNIT 3: Smart Electronic Clothing – Requirements, different sensor, processing of conductive yarn, superhuman wardrobe, application in defence. Multifunctional textiles with incorporated electronics for integrated communication, music, health monitoring, defence support functions, wearable computers. UNIT 4: Sports Textile: Requirement, different fibres used, approaches for manufacture. Fibre as solar cells, Recent advances in multifunctional textiles and their applications. Suggested Text Books & References:

1. Textiles in sport, Edited by R Shishoo, Woodhead Publisher. 2. Wearable electronics and photonics, Edited by X M Tao, Woodhead Publisher. 3. Wellington Sears handbook of Industrial Textiles, S Adanur, Woodhead Publisher 4. Handbook of technical textiles, Edited by A R Horrocks and S C Anand, UK. 5. Nanofibres and nanotechnology in textiles, Edited by P Brown and K Stevens, Woodhead Publisher. 6. Nanofunctional textiles and their application, Edited by Y Li, Woodhead Publisher. 7. Smart textile for medical and healthcare, Edited by L Van Langenhove, Woodhead Publisher.

NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit. FTL-2606 Functional Finishes of Garments L T P Credits 3 2 0 4

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100

13

UNIT 1: Introduction to textile finishing. Aim and scope. Classification of finishes. Concept of permanent and temporary finishes. Various finishes in industrial practices such as raising and shearing, drying. Calendering - its types, construction and function of various calendering m/cs. Sanforizing – method and mechanism.

UNIT 2:

Brief concept of finishing of wool: Crabbing, decatising, milling, shrink finishing, etc. General chemical finishes like softening, stiffening, delustering of rayon, polyester. organdy finish. Silky finish of polyester/ weight reduction of polyeste. Weighting of silk. Heat setting of synthetic fibres, concept and required machines.

Unit 3:

Introduction and preliminary concepts of specialty finishes such as durable press finish to textile and garments, anti-crease finish. Water repellent and water proof finish: concept, mechanism and their application. Flame-proof and flame-retardant finish: concept, mechanism and their application.

Unit 4: Introduction and preliminary concepts of specialty finishes such as Soil and oil repellent finish, anti-static finish, antimicrobial finish.

Introduction to enzymes and their applications in finishing of textiles and garments. Finishing of denim: stone wash, enzyme wash, etc. enzyme wash and some other specialty finishes. UV protective finishes. Brief introduction and application of nanofinish, ultrasound, Laser, plasma Technology in textiles. Suggested Text Books & References:

1. Gohl E P G and Vilensky LD, “Textile Science”, CBS Publishers 2. An Introduction to Textile Finishing, JT Marsh 3. Textile Finishing, VA Shenai 4. Fundamental and practices in colouration of textiles, J N Chakarverty

NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit.

14

Elective- I FTL-2608 Fabrics Properties and Textile Designing: L T P Credits 3 2 0 4

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100 UNIT 1: Fabric formation technologies, Fabric properties-dimensional & structural, Mechanical, Comfort related properties, Low stress mechanical properties, properties related to aesthetic significance, other physical properties relevant to end use, Influence of fibres, yarn charcterstics and fabric construction parameter on clothing comfort. UNIT 2:

Concept of fabric designing through fabric structure, Importance of fabric structure, Basic Weaves: Plain, Twill, Sateen weaves, Theirs derivatives and ornamentation, Draft and Peg-plan for all simple weave. Other decorative weaves like Diamond, Mockleno, Corkscrew, Honey Comb, Huck-a-back, etc

UNIT 3:

knitting, comparison of knitting and weaving technology, Classification of knitting. Difference between woven and knitted fabric properties.,Characteristics of warp knit and weft knit structure.

knitting elements: knitting needles, sinkers, cam systems, etc. Knitting cycles,Weft knitting: properties and uses of basic weft knitted structures- Plain, Rib, Interlock and Purl.

Unit 4:

Fundamental Stitches: Knit, Tuck and float stitches and their uses. Ornamentation of knitted fabrics. Concept of loop length, production calculation, Calculations for Tightness factor, fabric cover, stitch density, areal density and knitting machine production. Suggested Text Books & References:

1. Handbook of weaving; Sabit Adanur, Technomic Publishing Company, Inc, U.S.A 2. Fabric structure and design, Gokarneshan N, New Age International, N Delhi. 3. Knitting Technology, Azgaonkar, Universal Publishing Corp.

15

NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit. FTL-2610 Structure and Properties of Fibres L T P Credits 3 2 0 4

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100 UNIT 1: Structure of fibres: Traditional view of fibre structure, Methods of investigation of fibre structure, Introductory idea about identification of chemical and physical structure by IR spectroscopy, X-ray, SEM, UNIT 2: Moisture Absorption: Fundamentals of moisture like humidity, Moisture regain and content, relation, equilibrium, Heat of sorption, swelling of fibres, factors influencing results of tensile experiment, creep and stress relaxation UNIT 3: Introduction to dielectric properties and static electricity, Measurement of static electricity, Optical properties: Refractive index and birefringence, Birefringence and orientation of fibres, reflection and lustre. UNIT 4: Introduction to thermal Properties and fibre friction, technological importance, measurement of friction, Effect of load and area of contact, static and kinetic friction. General theory of friction and application to fibres. Suggested Text Books & References:

1. Meredith R, “The mechanical properties of textile fibres,” North Holland Publishing Co; 2. Morton W E and Hearle J W S, “Physical properties of textile fibres”, The Textile Institute, UK 3. Gupta V B and Kothari V K, “ manufactured Fibre Technology” Chapman and Hall, London

NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit.

16

FTP-2612 Software Packages Lab L T P Credits 0 0 2 1 Study and application of tools and software packages related to the topic and discipline of the study and department. Pattern making, grading and marker making and designing software’s in Fashion and Technology. FTP-2614 Garment Development Lab-II L T P Credits 0 0 2 1 Construction of garment of children, men and women wear. Techniques of draping and grading, their applications in dress construction. Line balancing system. Practice of pattern making and construction of selected kids, ladies and gents wear. Preparation functional/Speciality garment. FTP-2616 Independent Study L T P Credits

0 0 2 2

Student has to study the particular topic as per their interest/requirement of the project or suggested by the faculty under supervision.

17

Semester-III

FTL-2615 Managing the Supply chain L T P Credits 3 2 0 4

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100 Unit-1: Supply Chain, Supply Chain Concepts: flow of materials, Wastes in the pipeline, flow of Information, Supply Chain Drivers, Supply chain Management: Concept, frame work and need for study. Unit-2: Planning & Managing Inventories in a Supply Chain: Safety Inventory , Benchmarking the supply chai Quick Response, Vendor Managed Inventory(VMI), Postponement, Just in Time & QR Logistics, Introduction to Apparel / Textile Supply Chain, Distribution & Procurement and various Procurement Channels in Supply Chain. Unit-3: Reverse supply chain(RSC), difference with forward supply chain, cost considerations involved , industries participation, factors leading to application of concept of RSC in specific industries and its restricted application, benefits, cost effectiveness of RSC. Unit-4: Supply chain in apparels, Introduction to sampling, Understanding quality procedures in sampling and sample development, different stages of samples and their requirements From Proto to Shipment sample Proto, fit, Size set, Pre production, TOP, Sealer, important Industry Inputs Suggested Text Books & References: 1. Logistics & supply Chain Management: Strategies for Reducing Cost and Improving service – Martin Christopher 2. Supply Chain Management: Strategy, Planning and Operation - Sunil Chopra. 3. Partnership Sourcing: An Integrated Supply Chain Management Approach - Douglas Macbeth NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit.

18

Elective- II FTL-2617 Design of Experiments L T P Credits 3 2 0 4

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100 UNIT 1: General introduction about various statistical tools and their usefulness. Objectives and principles of experimental design. Experimental design terminology. Increasing accuracy on experiments. UNIT 2: Completely randomized designs. Blocking designs. Latin square designs. Analysis of variance (ANOVA). Correlation and regression. Principles of experimental design. Typical application of experimental design. Simple comparative experiments. Experiment with single factor. UNIT 3: Introduction to factorial designs. Concept of fractional factorial design. Two level design. Three level design, Response surface designs. Central composite and Box-Behnken designs. Concept of Split-plot design. UNIT 4: Fitting regression models. Multiple regression and correlation analysis, Partial correlation. Test of significance and model lack of fit. Use of replicates. Orthogonal design and Taguchi Approach. Use of computers and software packages. NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit. Suggested Text Books & References:

1. Cochran W G and Cox G M, “Experimental Design”, John Wiley and Sons, Inc 2. Montgomery D C, “Design and Analysis of Experiments”, John Wiley and Sons 3. Leaf G A V, “Practical Statistics for the Textile Industry”, (Part-I and Part –II), The

Textile Institute, UK 4. Khuri, A.I., and Cornell, J., Response Surface: Design and Analyisi, Marcel Dekker, New York 5. Diamond William J., Practical Experiment Designs, first Indian Edition, CBS Publishers and

Distributors, New Delhi 6. Montgomery D C, Peck E A, Vinning G G, “Introduction to Linear Regression Analysis, John Willey

and Sons, Inc

19

Or

FTL-2619 Intellectual Property Rights L T P Credits: 3 2 0 4

Internal Assessment Marks: 50 + External Marks of Theory Exam: 50 = Total Marks: 100 Unit I Intellectual property rights and its importance. Overview of world intellectual property organisation (WIPO) and their role. IPR in perspective of India. Introduction to copyright, patent, industrial designs and trade. Concept of IPR in textile and fashion industries. Unit II Copy right: definition, types of works that are covered by copyright, rights protected by copy rights-economic rights, moral rights. Right of reproduction:-right of public performance, broadcasting and communication to the public. Right of translation and adaptation. Step to get copy right, limitation and general duration of copy right. International agreements concerning copyright. Related rights: right of performers, broadcasting organisation. Unit III Trademarks: introduction, signs that may serve as trademarks, Madrid agreement, procedure for getting trademark register, geographic indications. Appellation of origin. Industrial design: introduction, different between industrial design, trademark and patent. Procedure for protection of Industrial design, general duration of Industrial design. Unit IV Patents: purpose, need of patent, required condition for patentability. Procedure for filing the patent application. Limitation and advantages of patenting. Issue of enforcement and licensing, patent cooperation treaty. Unfair competition: introduction, acts of unfair competition and protection. Applications of IPR in textile and fashion industries. NOTE: Eight questions will be set in all by the examiners taking two questions from each unit. Each question carries 10 Marks. Students will be required to attempt five questions in all selecting at least one question from each unit.

20

FTP-2621 Research Project Writing L T P Total Credits 0 0 4 4 The student will submit a technical project synopsis at the end of third semester for the approval in a specified format. FTP-2623 Seminar L T P Total Credits 0 0 2 2 Every student will be required to present a seminar talk on a topic approved by the Deptt except on his/her

dissertation. The committee constituted by the Head of the Deptt will evaluate the presentation and will award

one of the grades as per PG ordinance. A Student who is awarded the ‘F’ grade will be required to repeat the

seminar on the same topic.

FTP-2625 Dissertation-Phase-I L T P Total Credits 0 0 4 4 Every student will carry out dissertation under the supervision of a faculty. The student will submit a synopsis of thesis topic at the beginning of the semester. The Departmental committee shall examine the request for dissertation from each student and fix in advance:

a. An internal guide (a faculty members of the university) b. Area of dissertation c. The name and dissertation of an external guide, if any.

Every student will be required to present two seminar talks, first at the beginning within one month of the Dissertation (Phase-I) to present the scope of the work and to finalize the topic, and second towards the end of the semester, presenting the work carried out by him/her in the semester. The committee constituted will screen both the presentations so as to award the sessional as prescribed in ordinance. FTP-2627 Independent Study L T P Credits: 0 0 3 3

Student has to study the particular topic as per their interest/requirement of the project or suggested by the faculty under supervision.

21

SEMESTER-IV FTP-2620 Dissertation L T P Total Credit 4 0 16 20 The Dissertation Phase-1 will be continued as dissertation in 4th Semester. At the end of the semester, every student will be required to submit three hard bound copies and a soft copy of Master’s dissertation to the office of the concerned Department. Out of these, one copy will be kept for department record & one copy shall be for the supervisor. A copy of the dissertation will be sent to the external examiner by the concerned department, after his/her appointment and intimation from the university. Dissertation will be evaluated by a committee of examiners consisting of the Head of the Department, dissertation supervisor(s) and one external examiner. The external examiner shall be appointed by the University from a panel of examiners submitted by the respective Head of Deptt., to the Chairman, PG Board of Studies. The student will defend her dissertation through presentation before this committee and the committee will award one of the grades as prescribed in ordinance. A Student scoring ‘Failing grade' in the exam shall have to resubmit her Dissertation after making all correction / improvements and this dissertation shall be evaluated as above.

FTP-2622 Seminar and Progress Report L T P Total Credit

3 2 0 4

The students will have to present the progress of dissertation work through seminars and progress report at the interval of four weeks.