Construction

New!Fundamentals of Construction Estimating, 4ePratt©2019CaseboundISBN-13: 978-1-337-39939-5

Construction Materials, Methods and Techniques, 4eSpence / Kulterman©2017CaseboundISBN-13: 978-1-3050-8627-2

Delmar Online Training Simulation: Residential Construction CodesInterplay Learning©2017ISBN-13: 978-1-337-10119-6Demo: www.cengage.com/simulationstation

Construction Jobsite Management, 4eMincks©2017CaseboundISBN-13: 978-1-305-08179-6

Residential Construction Academy: Basic Principles for Construction, 4eHuth©2016CaseboundISBN-13: 978-1-3050-8862-7

Introduction to Hydraulics and Hydrology: With Applications for Stormwater Management, 4eGribbin©2014CaseboundISBN-13: 978-1-133-69183-9

Building Trades2018 Learning Solutions

Why Digital Matters

Making learning convenient and flexible for students means empowering them to study when and how they want. With 84% of college students preferring a blended learning environment, and 78% agreeing that technology contributes to successful learning,1 students clearly want to study online and on their mobile phones. Research shows they’re right.

MindTap propels students from memorization to mastery.

Available for nearly 1000 courses, MindTap gives you complete ownership of your content and learning experience. Customize the interactive syllabi, emphasize the most important topics, and add your own material or notes in the ebook. The outcome-driven application helps you challenge every student, build their confidence, and empower them to be unstoppable.

2017 SIIA CODiE Award Finalist for Best Higher Education Learning Content Solution.

Delmar Online Training Simulation: HVAC 3.0 is a 3-D, immersive simulation that offers a rich learning

1 EDUCAUSE Student Study 2016

experience that mimics field performance. It challenges learners to master diagnostic and troubleshooting skills

across seven pieces of HVAC equipment – Gas Furnace, Oil Furnace, Gas Boiler, Split Residential A/C, Commercial A/C, Heat Pumps, and Commercial Walk-in Freezers. Delmar Online Training Simulation: HVAC 3.0 offers approximately 200 scenarios that allow students to troubleshoot and build diagnostic and critical thinking skills. Training Mode has fixed scenarios to aid in familiarizing the user with the equipment, the problem needing attention, and using the simulation. Challenge Mode has randomized scenarios within three levels: Beginner, Intermediate, and Advanced. Both modes require learners to diagnose a fault or faults and perform the repair successfully while materials and labor costs are tracked. Soft skills are also included within the simulation.

Delmar Online Training Simulation: Electricity and Wiring is an immerse, realistic and 3D learning experience based on the 2014 National Electrical Code®. Begin with mastering the basics of residential wiring on single pole, 3-way, and multi-location switches. Next, work your way to mastering and practicing room-by-room wiring installations. Last, improve and test your circuit and wiring math skills with a series of induction and capacitance interactive equations and accompanying quiz challenges.

2017 CODiE Award Winner for Best Emerging Education Technology System.

Delmar Online Training Simulation: Residential Construction Codes is an immersive simulation designed for students and professionals needing to understand and apply the latest Building and Electrical Codes for residential construction. Based on the 2015 International Residential Code (IRC®) and the 2014 National Electrical Code (NEC®), this simulation covers every inspection phase of new construction, from site prep to completion. Easily accessible online, this highly interactive, practice-based simulation will test your knowledge of residential construction codes.

COURSE GUIDE

Visit cengage.com/buildingtrades/cg and search by ISBN to request complimentary online review copies and find information on online solutions, supplements, bundles, and alternative formats. Or contact your Learning Consultant at 1-800-423-0563. BE UNSTOPPABLE

DeWALT® Construction Safety & OSHA Handbook©2013PaperboundISBN-13: 978-1-133-13205-9

New!DeWALT® Building Code Reference, 4eAmerican Contractor’s Exam Services©2018SpiralboundISBN-13: 978-1-337-27143-1

New!DeWALT® Building Contractor’s Licensing Exam Guide: Based on the 2018 IRC & IBC, 5ePrince©2018PaperboundISBN-13: 978-1-337-27149-3

New!DeWALT® Construction Estimating Complete Handbook©2017PaperboundISBN-13: 978-1-305-96634-5

DeWALT® Construction Professional Reference Master Edition©2010PaperboundISBN-13: 978-1-418-06632-1

Renewable Energy and Sustainable DesignGrinnell©2014CaseboundISBN-13: 978-1-111-54270-2

National Geographic Reader: SustainabilityNational Geographic Learning©2013PaperboundISBN-13: 978-1-285-06061-3

The Electrician’s Guide to Photovoltaic System InstallationFletcher©2014PaperboundISBN-13: 978-1-111-63996-9

Green Building: Principles and Practices in Residential ConstructionKruger / Seville©2013CaseboundISBN-13: 978-1-111-13595-9

Smart Grid HomeWells©2013PaperboundISBN-13: 978-1-111-31851-2

Green Building: A Professional’s Guide to Concepts, Codes and InnovationFloyd©2012PaperboundISBN-13: 978-1-111-03511-2

Green Applications for Residential ConstructionGuertin©2011PaperboundISBN-13: 978-1-111-03754-3

Construction cont’d Green Building and Sustainable Design

National Geographic Reader: Architecture and ConstructionNational Geographic Learning©2013PaperboundISBN-13: 978-1-133-96023-2

Estimating for Residential Construction, 2ePratt©2012PaperboundISBN-13: 978-1-111-30887-2

Design-Build EssentialsJackson©2011CaseboundISBN-13: 978-1-428-35303-9

Applied Statics and Strength of Materials, 2eBurns©2010CaseboundISBN-13: 978-1-435-41331-3

Construction Management: Emerging Trends and TechnologiesWilliams©2010PaperboundISBN-13: 978-1-428-30518-2

Structural Steel Drafting & Design, 2e MacLaughlin / Estrada©2009PaperboundISBN-13: 978-1-401-89032-2

Construction Law for Managers, Architects, and EngineersWhite©2008PaperboundISBN-13: 978-1-418-04847-1

Web: cengage.com/buildingtrades/cg • Phone: 1-800-423-0563

Carpentry, 6eVogt©2014CaseboundISBN-13: 978-1-133-60736-6

Woodworking, 2eMacdonald©2014CaseboundISBN-13: 978-1-133-94963-3

Residential ConstructionAcademy: Carpentry, 4eVogt©2016CaseboundISBN-13: 978-1-3050-8618-0

Trim CarpentryMoon©2007PaperboundISBN-13: 978-1-418-02864-0

New!DeWALT® Carpentry and Framing Complete Handbook, 2eBrackett©2019PaperboundISBN-13: 978-1-337-39879-4

Carpentry

Residential Construction Academy: Facilities Maintenance, 3eStandiford©2014PaperboundISBN-13: 978-1-1332-8243-3

New!Delmar Online Training Simulation: Electricity and WiringInterplay Learning©20182 Term (12 months) Instant AccessISBN-13: 978-1-337-11629-94 Term (24 months) Instant AccessISBN-13: 978-1-337-11625-1

New!Electrical Grounding and Bonding, 5eSimmons©2018PaperboundISBN-13: 978-1-337-10200-1

New!Illustrated Guide to the National Electric Code, 7eMiller©2018ISBN-13: 978-1-337-10197-4

New!Electrical Wiring Residential, 19eMullin / Simmons©2018PaperboundISBN-13: 978-1-337-10183-7HardboundISBN-13: 978-1-337-10184-4

New!Electrical Wiring Commercial, 16eSimmons / Mullin©2018PaperboundISBN-13: 978-1-337-10188-2

New!Electrical Wiring Industrial, 16eHerman©2018PaperboundISBN-13: 978-1-337-10192-9

NEW!Residential Construction Academy: House Wiring, 5eFletcher©2019CaseboundISBN-13: 978-1-337-40241-5

DeWALT® Electrical Professional Reference, 2014 Edition©2016ISBN-13: 978-1-3053-9506-0

New!DeWALT® Electrical Professional Reference - 2017 EditionRosenberg©2018ISBN-13: 978-1-337-27139-4

New!DeWALT® Electrical Licensing Exam Guide: Based on the NEC® 2017Holder©2018ISBN-13: 978-1-337-27138-7

New!DeWALT® Electrical Code Reference: Based on the NEC® 2017Sandefur©2018ISBN-13: 978-1-337-27135-6

NFPA 70® National Electrical Code®

NFPA©2017SoftcoverISBN-13: 978-1-455-91277-3Looseleaf:ISBN-13: 978-1-455-91278-0SpiralboundISBN-13: 978-1-455-91279-7

National Electrical Code 2017 Pocket Guide for Residential Electrical InstallationsNFPA©2017PaperboundISBN-13: 978-1-455-91377-0

National Electrical Code 2017 Pocket Guide for Commercial and Industrial Electrical InstallationsNFPA©2017PaperboundISBN-13: 978-1-455-91381-7

Facilities Maintenance

Electrical

Web: cengage.com/buildingtrades/cg • Phone: 1-800-423-0563

National Electrical Code 2017 TabsNFPA©2017ISBN-13: 978-1-337-40201-9

National Electrical Code 2017 HandbookNFPA©2017PaperboundISBN-13: 978-1-455-91284-1

Delmar’s Standard Textbook of Electricity, 6eHerman©2016CaseboundISBN-13: 978-1-2858-5270-6

Electrical SafetyZachariason©2012PaperboundISBN 13: 978-1-435-48185-5

Electrical Safety Video on DVDCengage©2012ISBN-13: 978-1-439-06022-3

Residential Construction Academy: Electrical Principles, 2eHerman©2012ISBN-13: 978-1-111-30647-2

AC Theory, 3eNjatc / Keljik©2011CaseboundISBN-13: 978-1-435-48902-8

New!Electricity for Refrigeration, Heating, and Air Conditioning, 10eSmith©2019CaseboundISBN-13: 978-1-337-39912-8

New!DeWALT® HVAC Technician Certification Exam Guide - 2018, 3eChristopherson©2018ISBN-13: 978-1-337-27155-4

Refrigeration and Air Conditioning Technology, 8eTomczyk / Silberstein / Whitman / Johnson©2017CaseboundISBN-13: 978-1-305-57829-6

Delmar Online Training Simulation: HVAC, 3.0Interplay Learning©2017Demo: www.cengage.com/simulationstation2 terms (12 months) Instant AccessISBN-13: 978-1-337-29401-04 terms (24 months) Instant AccessISBN-13: 978-1-305-58440-2

MindTap for Delmar Online Training Simulation: HVAC 3.0 – Simulations OnlyInstant Access Code 2 Semester ISBN-13: 978-1-337-38529-9ePin LMS Integrated 2 SemesterISBN-13: 978-1-337-38531-2Instant Access Code 4 SemesterISBN-13: 978-1-337-27616-0ePin LMS integrated 4 SemesterISBN-13: 978-1-337-27618-4

Electricity and Controls for HVAC-R, 7eHerman / Sparkman©2014PaperboundISBN-13: 978-1-133-27820-7

Residential Construction Academy: HVAC, 2eSilberstein©2012CaseboundISBN-13: 978-1-4390-5634-9

New!DeWALT® HVAC Code Reference: Based on the 2018 International Mechanical Code, 3eAmerican Contractor’s Exam Services©2018SpiralboundISBN-13: 978-1-337-27145-5

New!Commercial Refrigeration for Air Conditioning Technicians, 3eWirz©2018ISBN-13: 978-1-305-50643-5

Heating with Renewable EnergySiegenthaler©2017CaseboundISBN-13: 978-1-285-07560-0

Heat Pumps, 2eSilberstein©2016CaseboundISBN-13: 978-1-305-08163-5

Modern Hydronic Heating, 3eSiegenthaler©2012PaperboundISBN-13: 978-1-428-33515-8

Electrical cont’d HVAC

Web: cengage.com/buildingtrades/cg • Phone: 1-800-423-0563

Masonry Skills, 7eKreh©2015CaseboundISBN-13: 978-1-285-42683-9

Safety for Masons, 2eKreh©2010PaperboundISBN-13: 978-1-418-04990-4

Residential Construction Academy: Masonry, Brick & Block ConstructionHam©2008CaseboundISBN-13: 978-1-418-05284-3

Mathematics for Renewable Energy TechniciansDeVore©2017PaperboundISBN-13: 978-1-285-07933-2

Building Math Skills Online for ConstructionCengage©2013ISBN-13: 978-1-133-59042-2

Mathematics for Plumbers and Pipefitters, 8eSmith©2013PaperboundISBN-13: 978-1-1116-4260-0

Practical Problems in Mathematics for Heating & Cooling Technicians, 6eDeVore©2013PaperboundISBN-13: 978-1-111-54135-4

New!DeWALT® Plumbing Licensing Exam Guide: Based on the 2018 IPC, 5eAmerican Contractors Exam Services / Prince©2018PaperbackISBN-13: 978-1-337-27152-3

New!DeWALT® Plumbing Code Reference: Based on the 2018International Plumbing and Residential Codes, 4eAmerican Contractors Exam Services©2018SpiralboundISBN-13: 978-1-337-27147-9

Plumbing 101, 6e PHCC©2013PaperboundISBN-13: 978-1-133-28153-5

Plumbing 201, 6ePHCC©2016PaperboundISBN-13: 978-1-305-40164-8

Practical Problems in Mathematics for Masons, 3eBall / Ham / Ham©2013PaperboundISBN-13: 978-1-133-01474-4

Mathematics for Electricity and Electronics, 4eKramer©2012CaseboundISBN-13: 978-1-111-54507-9

Building a Foundation in Mathematics, 2ePeterson©2011CaseboundISBN-13: 978-1-435-48854-0

Masonry

MathematicsPlumbing

Plumbing 301 PHCC©2008PaperboundISBN-13: 978-1-418-06534-8

New!Plumbing 401, 2ePHCC©2019PaperboundISBN-13: 978-1-337-39183-2

Residential Construction Academy: Plumbing, 2eJoyce©2012CaseboundISBN-13: 978-1-111-30777-6

Web: cengage.com/buildingtrades/cg • Phone: 1-800-423-0563

Retooling the U.S. Housing IndustryRashkin©2012PaperboundISBN-13: 978-1-111-31382-1

Trades TechnicianSoft Skills ManualCoscia©2012PaperboundISBN-13: 978-1-111-31381-4

DeWALT® Spanish/English Construction Dictionary – Illustrated Edition©2007PaperboundISBN-13: 978-0-977-00039-5

New!Significant Changes to the International Residential Code 2018 Edition©2018PaperboundISBN-13: 978-1-337-27133-2

Significant Changes to the IPC, IMC, and IFGC, 2015International Code Council ©2015PaperboundISBN-13: 978-1-609-83568-2

Code Source: Accessibility©2012SpiralboundISBN-13: 978-1-111-03724-6

Code Source: Fire©2012SpiralboundISBN-13: 978-1-111-03725-3

Building Code® Basics: CommercialInternational Code Council©2013PaperboundISBN-13: 978-1-133-28335-5

Building Code® Basics: ResidentialInternational Code Council©2013PaperboundISBN-13: 978-1-133-28336-2

New!2018 International Building Code©2018Soft CoverISBN-13:-13: 978-1-609-83735-8Turbo Tabs for Soft Cover ISBN-13: 978-1-609-83714-3Loose Leaf ISBN-13: 978-1-609-83734-1Turbo Tabs for Loose leaf ISBN-13: 978-1-609-83715-0

New!2018 International Energy Conservation Code®

International Code Council©2018PaperboundISBN-13: 978-1-609-83749-5Turbo Tabs for Soft CoverISBN-13: 978-1-609-83728-02018 International Energy Conservation Code® / ASHRAEISBN-13: 978-1-609-83750-1

New!Significant Changes to the International Building Code 2018 Edition©2018PaperboundISBN-13: 978-1-337-27120-2

New!Print Reading for Machinists, 6eTaylor©2019ISBN-13: 978-1-285-41961-9

Blueprint Reading for Welders, 9eBennett / Siy©2015SpiralboundISBN-13: 978-1-133-60578-2

Understanding Construction Drawings, 6eHuth©2014PaperboundISBN-13: 978-1-285-06102-3

Blueprints and Plans for HVAC, 4eMoravek / Miller©2013PaperboundISBN-13: 978-1-133-58814-6

Print Reading for Architecture and Construction Technology, 3eMadsen / Jefferis©2013PaperboundISBN-13: 978-1-133-12727-7

Basic Blueprint Reading & Sketching, 9eOlivo / Olivo©2011PaperboundISBN-13: 978-1-435-48378-1

Print Reading for Engineering and Manufacturing Technology, 3eMadsen©2013PaperboundISBN-13: 978-1-111-30871-1

Blueprint Reading and Drafting for Plumbers, 2eJoyce©2009PaperboundISBN-13: 978-1-428-33513-4

Reference

Codes

Print Reading

The DEWALT® Mobile Pro™ App provides instant answers to critical job site questions, and can be customized with trade-specific add-ons to

create a tool that is tailored to your needs. The DEWALT® Mobile Pro™ App provides exclusive access to valuable content to get the job done right. Learn more at: dewalt.cengage.com/mobilepro

Web: cengage.com/buildingtrades/cg • Phone: 1-800-423-0563

New!2018 International Residential Code©2018Soft CoverISBN-13:-13: 978-1-609-83737-2Turbo Tabs for Soft Cover ISBN-13: 978-1-609-83716-7Loose Leaf ISBN-13: 978-1-609-83736-5Turbo Tabs for Loose Leaf ISBN-13: 978-1-609-83717-4

New!2018 International Existing Building Code©2018Soft CoverISBN-13: 978-1-609-83752-5Turbo Tabs for Soft Cover ISBN-13: 978-1-609-83726-6Loose Leaf ISBN-13: 978-1-609-83751-8Turbo Tabs for Loose Leaf ISBN-13: 978-1-609-83727-3

2018 International Fire Code©2018Soft CoverISBN-13: 978-1-609-83739-6Turbo Tabs for Soft Cover ISBN-13: 978-1-609-83718-1Loose LeafISBN-13: 978-1-609-83738-9Turbo Tabs for Loose Leaf ISBN-13: 978-1-609-83719-8

New!2018 International Fuel Gas Code©2018Soft CoverISBN-13: 978-1-609-83741-9Turbo Tabs for Soft Cover ISBN-13: 978-1-609-83724-2Loose LeafISBN-13: 978-1-609-83740-2Turbo Tabs for Loose Leaf ISBN-13: 978-1-609-83725-9

New!2018 International Mechanical Code©2018Soft CoverISBN-13: 978-1-609-83743-3Turbo Tabs for Soft Cover ISBN-13: 978-1-609-83722-8Loose Leaf ISBN-13: 978-1-609-83742-6 Turbo Tabs for Loose Leaf ISBN-13: 978-1-609-83723-5

New!2018 ICC Performance Code for Buildings and Facilities©2018Soft Cover ISBN-13: 978-1-609-83753-2

New!2018 International Plumbing Code©2018Soft CoverISBN-13: 978-1-609-83745-7Turbo Tabs for Soft Cover ISBN-13: 978-1-609-83720-4Loose Leaf ISBN-13: 978-1-609-837440 Turbo Tabs for Loose Leaf ISBN-13: 978-1-609-83721-1

New!2018 International Private Sewage Disposal Code©2018Soft CoverISBN 978-1-609-83747-1

New!2018 International Property Maintenance Code©2018Soft CoverISBN-13: 978-1-609-83748-8

New!2018 International Swimming Pool and Spa Code©2018Soft CoverISBN-13: 978-1-609-83746-4

New!2018 International Wildland-Urban Interface Code©2018Soft CoverISBN-13: 978-1-609-83754-9

New!2018 International Zoning Code©2018Soft CoverISBN-13: 978-1-609-83755-6

Plumbing 201, 6ePHCC©2016PaperboundISBN-13: 978-1-305-40164-8

2015 International Residential Code for One- and Two-Family Dwellings©2014Soft CoverISBN-13: 978-1-609-83470-82015 International Residential Code for One-and Two-Family Dwellings Loose Leaf ISBN-13: 978-1-609-83469-22015 International Residential Code Turbo Tabs for Loose Leaf ISBN-13: 978-1-609-83527-92015 International Residential Code Turbo Tabs for Soft Cover ISBN-13: 978-1-609-83528-62015 International Residential Code Commentary Vol. 1 ISBN-13: 978-1-609-83284-12015 International Residential Code Commentary Vol. 2 ISBN-13: 978-1-609-83285-8

New!DeWALT® 2018 Residential Construction Codes: Complete Handbook, 3e Underwood©2018PaperboundISBN-13: 978-1-337-27141-7

DeWALT® Building Code Reference, 3eAmerican Contractor’s Exam Services©2017SpiralboundISBN-13: 978-1-305-66699-3

DeWALT® Plumbing Code Reference: Based on the 2015 International Plumbing and Residential Codes, 3eAmerican Contractors Exam Services©2017SpiralboundISBN-13: 978-1-305-66701-3

Web: cengage.com/buildingtrades/cg • Phone: 1-800-423-0563

Take advantage of our personalized services, designed to meet your needs and those of your students, so you’ll be confident and ready to go come the first day of class. From hands-on help with course set up, to proactive support throughout the term, we’re committed to delivering you a successful digital experience. Visit our Partnership Pledge page to learn more, then contact your Learning Consultant to craft your personalized Pledge today.

cengage.com/partnership-pledge

PERSONALIZED SERVICES

Visit cengage.com/welding/cg and search by ISBN to request complimentary online review copies and find information on online solutions, supplements, bundles, and alternative formats. Or contact your Learning Consultant at 1-800-423-0563.

M180000360243978-1-337-67431-7

EARN BETTER GRADES.Students using MindTap from Cengage to supplement print course materials performed better than those using print alone.2 Want to learn more? Visit cengage.com/mindtap for more info and to see what online options are available for your course.

2 Actual student performance data.

New!2018 International Solar Energy ProvisionsInternational Code Council©2018PaperboundISBN-13: 978-1-609-83729-7

Building Code Basics: EnergyInternational Code Council©2014PaperboundISBN-13: 978-1-133-28339-3

Building Code Basics: GreenInternational Code Council©2013PaperboundISBN-13: 978-1-133-28338-6

Code Source: International Energy Conservation CodeInternational Code Council©2012SpiralboundISBN-13: 978-1-111-03723-9

Going Green with the International Residential Code®

Caulfield©2011PaperboundISBN-13: 978-1-435-49729-0

2015 International Green Construction Code and CommentaryInternational Code Council©2014Soft CoverISBN-13: 978-1-6098-3293-32015 International Green Construction Code CommentaryISBN-13: 978-1-609-83293-3

CodesGreen Codes

Visit cengage.com/buildingtrades/cg and search by ISBN to request complimentary online review copies and find information on online solutions, supplements, bundles, and alternative formats. Or contact your Learning Consultant at 1-800-423-0563.

M180000359073978-1-337-67354-9