COSHH Risk Assessment- Hardtop XP

Embed Size (px)

Citation preview

  • 8/10/2019 COSHH Risk Assessment- Hardtop XP

    1/5

    COSHH RISK ASSESSMENT

    Project Name: CSR Wagon Coating Rehabilitation

    Project Duration: 15thJuly to 20 October 2014

    Hardtop XP

    Jotun Limited

    Owner ETIHAD RAIL Abu Dhabi

    Client CSR

    Contractor: FAMECO general Contracting LLC. Abu Dhabi.

    Location of job: Al Ruwais, Western Region Abu Dhabi, UAE

    Prepared by: Muhammad Tayyab

    HSE [email protected]+971 55 3146060

    Fameco General Contracting LLC, Abu Dhabi, UAE.

    mailto:[email protected]:[email protected]://www.mccarthy-environmental.co.uk/images/coshh-logo.pngmailto:[email protected]
  • 8/10/2019 COSHH Risk Assessment- Hardtop XP

    2/5

    COSHHRisk AssessmentControl of substances hazardous to health

    Company name:

    Fameco general contracting LLC. Abu Dhabi

    Dept. (if applicable): N/A

    Describe the activity or

    work process.(Inc. how long/ how often this

    is carried out and quantity

    substance used)

    Paint rehabilitation work for CSR wagons in Ruwais area.

    Spot blasting in paint damaged area and applying above mentioned paint system with

    airless spray pumps, rollers and paint brush.

    Location of process

    being carried out?

    Etihad rail- Al Ruwais

    Identify the persons at risk: Employees Visitors Public

    Name the substance involved in the

    process and its manufacturer.(A copy of a current safety data sheet is attached

    to this assessment)

    Hardtop XP- Jotun LimitedUN Number: 1263Class: 3Packing Number: III

    Classification (state the category of danger)

    This product has carcinogenic effect having adverse affects on fertility.

    Hazard Type

    Gas Vapour Mist Fume Dust Liquid Solid Other (State)

    Route of Exposure

    Inhalation Skin Eyes Ingestion Other (State) Injection with high Gun pressure

    EnvironmentalOxidising

    Biological Flammable

    SensitisingToxic

    Harmful-lungdamage if swallowed

    Irritant-dermatitis

    causing

    Highly

    Flammable

    Extremely

    Flammable

    Corrosive

    Very Toxic

    http://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.pnghttp://www.mccarthy-environmental.co.uk/images/coshh-logo.png
  • 8/10/2019 COSHH Risk Assessment- Hardtop XP

    3/5

    Workplace Exposure Limits (WELs)please indicate n/a where not applicable

    Long-term exposure level

    441 mg/m 15 minute(s).

    100 ppm 15 minute(s).

    Short-term exposure level

    Flash point

    32C (89,6F)

    Density

    1.286 g/cm3

    Risk Phrase

    R11- Highly flammable.R10- Flammable.R45- May cause cancer.R61- May cause harm to the unborn child.R62- Possible risk of impaired fertility.R20- Also harmful by inhalation.R20/21- Also harmful by inhalation and in contact with skin.R65- Also harmful: may cause lung damage if swallowed.R37- Irritating to respiratory system.R38- Irritating to skin.R43- May cause sensitisation by skin contact.R33- Danger of cumulative effects.R66- Repeated exposure may cause skin dryness or cracking.

    R67- Vapours may cause drowsiness and dizziness.R50/53- Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.R51/53- Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

    Safety Phrases:

    S53- Avoid exposure - obtain special instructions before use.S23- Do not breathe vapour / spray.S36/37- Wear suitable protective clothing and gloves.S38- In case of insufficient ventilation, wear suitable respiratory equipment.S45- In case of accident or if you feel unwell, seek medical advice immediately

    Control Measures:

    Only use in well-ventilated areas.

    Use respirators approaching standard N95

    Prevent spillages.

    Avoid naked flames.

    Avoid inhalation of vapours and contact with skin when undertaking fuelling operations.

    When using do not eat, drink or smoke. Never siphon by mouth.

    Avoid contact with skin.

    Select gloves tested.

  • 8/10/2019 COSHH Risk Assessment- Hardtop XP

    4/5

    After using gloves, hands should be washed and dried thoroughly.

    Wear safety glasses or full-face shield if splashes are likely to occur.Vapor from product residues may create a highly flammable or explosive atmosphere inside the container.Do not cut, weld or grind used containers unless they have been cleaned thoroughly internally.Avoid dispersal of spilt material and runoff and contact with soil.

    Waste disposal

    The generation of waste should be avoided or minimized wherever possible.Provide drip trays underneath empty containers to avoid spillage on ground.Dispose via a licensed waste disposal contractor.This material and its container must be disposed of in a safe way.Care should be taken when handling emptied containers that have not been cleaned or rinsed out.Empty containers may retain some product residues.Vapor from product residues may create a highly flammable or explosive atmosphere inside the container.Do not cut, weld or grind used containers unless they have been cleaned thoroughly internally.Avoid dispersal of spilt material and runoff and contact with soil.

    Is health surveillance or monitoring required?

    Yes NoPersonal Protective Equipment(state type and standard)

    Dust mask Visor

    Suitable for chemical splashes

    Respirator

    A2P3 R 3MN95

    Goggles

    Gloves Overalls

    Footwear Other

    Sand blasting suit

    Mika- paint mixing

    First Aid Measures

    General:In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an

    unconscious person. If unconscious, place in recovery position and seek medical advice.

    Inhalation:Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing isirregular or if

    respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.

    Skin contact:Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water oruse recognised

    skin cleanser. Do NOT use solvents or thinners.

    Eye contact:Check for and remove any contact lenses. Immediately flush eyes with running water forat least 15

    minutes, keeping eyelids open. Seek immediate medical attention.

    Ingestion:If swallowed, seek medical advice immediately and show the container or label. Keep person warm and at

    rest. Do not induce vomiting.

  • 8/10/2019 COSHH Risk Assessment- Hardtop XP

    5/5

    Handling/ Storage

    Prevent the creation of flammable or explosive concentrations of vapours in air and avoid

    Vapor concentrations higher than the occupational exposure limits.

    In addition, the product should only be used in areas from which all naked lights and other sources of ignition havebeen excluded. Electrical equipment should be protected to the appropriate standard.

    To dissipate static electricity during transfer, earth the drum and connect to receiving container with bonding strap.

    Operators should wear antistatic footwear and clothing and floors should be of the conducting type.

    Keep away from heat, sparks and flame. No sparking tools should be used.

    Avoid contact with skin and eyes. Avoid the inhalation of dust, particulates, spray or mist arising from the application

    of this preparation. Avoid inhalation of dust from sanding.

    Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed.

    Put on appropriate personal protective equipment.

    Never use pressure to empty. Container is not a pressure vessel.

    Always keep in containers made from the same material as the original one

    Comply with the health and safety at work laws.

    Additional information on storage conditions

    Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight.

    Keep away from sources of ignition. No smoking. Prevent unauthorized access. Containers that have been opened

    must be carefully resealed and kept upright to prevent leakage.

    Disposal of Substances & Contaminated Containers

    Hazardous Waste Skip Return to Depot Return to Supplier Other

    (If Other Please State):

    Is exposure adequately controlled?

    Yes No

    Risk Rating Following Control Measures

    High Medium Low