Editorial Contact: Shannon Garrow [email protected] Cortec ® Advertising Agency: (651) 429-1100 Ext. 128 Company Contact: Jessi Meyer [email protected] Cortec ® Corporation: (651) 429-1100 Ext. 185 Technical Contact: Eric Uutala [email protected] Cortec ® Corporation: (651) 429-1100 Ext. 189 Attention: Editor June 1, 2010 PRODUCT RELEASE Cortec ® M-251 Corrosion Protection for Land and Offshore Conditions. Cortec ® M-251, an environmentally friendly, low foaming, corrosion-inhibiting additive for synthetic cutting fluids. Effective at concentrations as low as 0.5%, M-251 is soluble in water, glycols, and alcohols; providing both contact and vapor phase corrosion protection during and after operation. M-251 provides corrosion protection to carbon steel, copper, galvanized steel, and other ferrous and nonferrous metals and their alloys. M-251 is compatible with most water-based lubricants and with a range of biocides. It is compatible with seawater as well, which allows the use of this additive in offshore conditions. Besides synthetic cutting fluids, M-251 can also be used as an anticorrosion additive to water (water/ glycol) based lubricants, alkaline cleaners, water-based drilling muds, and water-based hydraulic fluids. Need a High-Resolution Photo? Please Visit: www.cortecadvertising.com Cortec ® Corporation is a world leader in innovative, environmentally responsible VpCI ® and MCI ® corrosion control technologies for Packaging, Metalworking, Construction, Electronics, Water Treatment, Oil & Gas, and other industries. Our relentless dedication to sustainability, quality, service, and support is unmatched in the industry. Headquartered in St. Paul, Minnesota, Cortec ® manufactures over 400 products distributed worldwide. ISO 9001 & ISO 14001:2004 Certified. Cortec Website: http://www.cortecvci.com Phone: 1-800-426-7832 FAX: (651) 429-1122 - End -

Cortec M-251 Corrosion Protection for Land and Offshore

Download PDF Report

Upload
others
View
3
Download
0

Embed Size (px)

Citation preview

Page 1: Cortec M-251 Corrosion Protection for Land and Offshore

Attention: Editor June 1, 2010

PRODUCT RELEASE Cortec® M-251 Corrosion Protection for Land and Offshore Conditions. Cortec® M-251, an environmentally friendly, low foaming, corrosion-inhibiting additive for synthetic cutting fluids. Effective at concentrations as low as 0.5%, M-251 is soluble in water, glycols, and alcohols; providing both contact and vapor phase corrosion protection during and after operation. M-251 provides corrosion protection to carbon steel, copper, galvanized steel, and other ferrous and nonferrous metals and their alloys. M-251 is compatible with most water-based lubricants and with a range of biocides. It is compatible with seawater as well, which allows the use of this additive in offshore conditions. Besides synthetic cutting fluids, M-251 can also be used as an anticorrosion additive to water (water/ glycol) based lubricants, alkaline cleaners, water-based drilling muds, and water-based hydraulic fluids.

Need a High-Resolution Photo? Please Visit: www.cortecadvertising.com Cortec® Corporation is a world leader in innovative, environmentally responsible VpCI® and MCI® corrosion control technologies for Packaging, Metalworking, Construction, Electronics, Water Treatment, Oil & Gas, and other industries. Our relentless dedication to sustainability, quality, service, and support is unmatched in the industry. Headquartered in St. Paul, Minnesota, Cortec® manufactures over 400 products distributed worldwide. ISO 9001 & ISO 14001:2004 Certified.

Cortec Website: http://www.cortecvci.com Phone: 1-800-426-7832 FAX: (651) 429-1122

- End -