Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
C O R P O R A T E P R E S E N T A T I O N
GSI SpA started up in October 2002 as a spin-off company of Lonza Composites. The beginning is mainly characterized by commercial activities with CNH Group plants in Basildon, UK, and St. Valentin, Austria. Follows the acquisition of the complete clients portfolio of Lonza Composites, ISO9000 Quality Certifi cation and a turnover rapidly increasing (2003-2004).
In 2005 GSI UK Ltd. is found and the strategic Joint-Venture with an English painter allows GSI SpA to provide a service always more closer to the needs of the key customer CNH UK.
In 2006 a new production line for Carraro Agritalia and the supply of CNH Italian plant in Imola. When GSI SpA acquires Lonza’s moulding plant based in Scanzorosciate (Bergamo), the company rapidly grows going from 50 to more than 100 employees.
2
CORPORATE HISTORY
In 2008 the commercial activities in China give birth to GSI Shanghai Ltd. In the following year GSI signs a supply agreement with CLAAS,worldwide leading company in manufacturing agriculture machineries, and starts to produce new SMC components.
2010 shows a great dynamism of the company: GSI UK is closed and replaced by GSI Industrial Painting Ltd. The new born company plays as third party of GSI SpA in the supply of painted components to CNH UK. At the end of 2010 comes the acquisition of 100% share of Ranger Deutschland GmbH.
In 2011 the commercial division of GSI North America LLC is established. When GSI SpA acquires 60% share of Ranger Shanghai Ltd., GSI Shanghai Ltd. becomes a manufacturing company.
In 2013 the start-up of GSI do Brasil that launches its production line in the second half of 2014: one Headquarter and two Module Centers, the three of them next door to our top customers CNH, Iveco and John Deere. Icing on the cake: a press of 4000 tons with the biggest capacity of all Southern America.
3
CORPORATE HISTORY
In July 2014 GSI SpA launches the placing of 5 million Euros of debt securities; Banca Popolare di Vicenza acts as recruiter and authorized bank. In November the Group receives the offi cial Quality Certifi cation of ELITE by Borsa Italiana (London Stock Exchange Group) to address the international community of investors.
2015 is a year of great expansion as the Group opens a new Module Center in St. Valentin, Austria, doubles its production capacity in the UKopening a new center for moulding and painting activities in Basildon, and reinforces its presence in China with the start-up of GSI Chongqing Co., Ltd.
From July 2017 GSI GROUP S.p.A. takes over GSI S.p.A. in the terms of a company rental agreement, thus granting the full production continuity.The new company welcomes an important and solid partner, operating worldwide in the design, production and sale of innovative and cutting-edge plastic components for leading customers in the automotive, motorbike and appliances industry.
4
CORPORATE HISTORY
GSI’s mission is to exceed customer expectations delivering top quality products and services, on time and on budget by bringing together advanced technologies (SMC, GMT, D-LFT, LWRT), devoted people and excellence in everything we do. In compliance with ISO 9001 and ISO TS 16949 quality standards, GSI produces, markets and supports the industrialization of assembled plastic products in the agricultural, earth-moving, automotive, commercial vehicles, design and electric industry.Our R&D and Project Management office develops cutting-edge and tailor-made technologies (such as SMC with aluminum, GMTex composites or LWRT soundproof panels to name a few) to satisfy the most compelling customer’s needs.
The production system goes from moulding to assembling, from painting to delivery to the final customers.
To be present with production plants right on the markets of our customers: this is our company vision, based on the key concept “think global, be local”.
5
MISSION
The Group strategy follows those guidelines:
the logistic displacement of production units, mainly for finishing production lines, close to the final customer allows to grant the client itself a top quality service, logistically efficient and low-cost;
to be a global supplier on the market in the production of oversize components made of composite materials
6
CORPORATE BUSINESS STRATEGY
Italy is our homeland, but we keep the world on the horizon. We are young, and development is a strong need for us. We aim to have in each Country a specifi c production plan working in synergy with our plants worldwide. To diversify and coordinate, to value peculiarity and increase interaction, this is written in our DNA. In other words: think global, be local.
GSI North America LLCSINCE 2011
GSI Brasil LTDASINCE 2014
GSI SpASINCE 2002
GSI Industrial Painting LtdSINCE 2005
GSI Deutschland GmbHSINCE 2010
GSI Austria GmbHSINCE 2015
GSI Shanghai Co., LtdSINCE 2011
GSI Chongqing Co., LtdSINCE 2015
EMEA
APAC
NAFTA
LATAM
7
GLOBAL FOOTPRINT
GSI GROUP SpA
GSI Deutschland GmbH
GSI North America LLC
GSI Brasil LTDA
GSI Industrial Painting Ltd
GSI Austria GmbH
GSI Shanghai Co., Ltd GSI Chongqing Co., LtdGSI S.A.Holding
8
ORGANIZATION CHART
GSI GROUP SpA H.Q. & OPERATION OFFICEActivities: Moulding - Assembling - R&D - Project Management
Plant: 40.000 sqmCovered: 10.500 sqm
9
PLANT DESCRIPTION - ITALY
GSI Industrial Painting Ltd GloucesterActivities: Assembling - Painting
Plant: 7.700 sqmCovered: 4.000 sqm
BasildonActivities: Moulding - Assembling - Painting
Plant: 3.700 sqmCovered: 2.700 sqm
10
PLANTS DESCRIPTION - UNITED KINGDOM
GSI Deutschland GmbH Activities: Moulding - Assembling - Project Management
Plant: 22.000 sqmCovered: 5.700 sqm
11
PLANT DESCRIPTION - GERMANY
GSI Austria GmbH Activities: Assembling - Painting
Plant: 1.930 sqmCovered: 1.130 sqm
12
PLANT DESCRIPTION - AUSTRIA
GSI Shanghai Co., Ltd Activities: Moulding - Assembling - Painting - Project Management
Plant: 18.000 sqmCovered: 7.800 sqm
13
PLANT DESCRIPTION - CHINA
GSI Chongqing Co., Ltd Activities: Assembling - Painting
Plant: 7.000 sqmCovered: 5.000 sqm
14
PLANT DESCRIPTION - CHINA
GSI Brasil LTDA Sete LagoasHeadquarterActivities: Moulding - Assembling - Painting
Plant: 5.000 sqmCovered: 2.000 sqm
CuritibaActivities: Assembling - Painting
Plant: 1.500 sqmCovered: 1.200 sqm
HorizontinaActivities: Assembling - Painting
Plant: 1.800 sqmCovered: 1.500 sqm
15
PLANTS DESCRIPTION - BRAZIL
TOTALPlant: 108.630 sqmCovered: 41.530 sqm
16
PLANTS DESCRIPTION
TONS ITALY GERMANY UK CHINA BRAZIL TOTAL
4000 1 1
3000 1 1 1 3
2500 1 1
2000 1 1 1 3
1500 1 1
1450 1 1
1200 2 2
1000 2 2
800 1 1 2
600 1 1
500 2 4 6
400 1 1
330 1 1
300 3 3
250 1 1
200 2 2
100 5 5
36Moulding PressesMax. table dimension: 4000x2800 (mm)17
VERTICAL MOULDING PRESSES
18
VERTICAL MOULDING PRESSES
BRAZILIAN MAX TABLE DIMENSION 4000 x 2800 (mm)
EUROPEAN MAX TABLE DIMENSION 3400 x 2500 (mm)
CHINESE MAX TABLE DIMENSION 3200 x 2200 (mm)
ITALY GERMANY UK CHINA BRAZIL
ISO 9001 2009
ISO TS 16 949 - -
19
QUALITY PROGRAM
20
HOMEMADE SYSTEMSFROM RAW MATERIALS TO PROCESS, GSI MAKES PRODUCTION SUCCESS.
Your key partner in the composite fi eld producing systems made of plastic components in the agricul-tural, automotive, commercial ve-hicles, design and electric industry. Our R&D and Project Management offi ce develops cutting-edge and tailor-made technologies to satisfy the most compelling customer’s needs.The production system goes from moulding to assembling, from painting to delivery to the fi nal cus-tomers.
SMC PiMCPowder in Mould Coating
GMTex composites
Carbon fi ber SMCSheet Moulding Compound
LWRTLight Weight Reinforced Thermoplastics
D-LFTDirect Long Fiber Thermoplastics
GMTGlass fi ber Mat reinforced
Thermoplastics
SMC with aluminum
Sheet Moulding Compound
SMCSheet Moulding Compound
BMCBulk Moulding Compound
LWRT soundproof panels Light Weight Reinforced Thermoplastics
Forged carbon
GMTGMTex composites
21
PLASTICS TECHNOLOGIES
Roof SMC
Air ducts Blow moulding
Box shroud SMC
Battery cover Injection
Hood SMC
Wide fenderSMC
REAR fenderSMC
22
AGRICULTURAL
23
AG CUSTOMERS
Roof skin and carrier SMC
Engine cover Forged carbon
Deck lid carrier Carbon fi ber SMC
Under body shield LWRT
Step cover LWRT
Body cover D-LFT
Under body shield D-LFTPedestrian beam D-LFT
Battery tray GMT
Heat shield SMC with aluminum
Light trim BMC
Under body shield LWRT soundproof panelsLWRT soundproof panels
24
AUTOMOTIVE
25
AUTOMOTIVE & C.V. CUSTOMERS
RoofSMC
Bumper SMC
Front panel SMC + injection
Spoilers SMC
Steps SMC
Door panelSMC or RTM
DeflectorsSMC
26
TRUCK
27
TRUCK & BUS
Railway supportSMC
Mill carter SMC
InsulatorSMC
Railway seats SMC
Sieve drawerSMC
28
OTHER APPLICATIONS
29
OTHER CUSTOMERS
3030
E X T R E M E L I G H T I N S U L ATO R S Y S T E M A P P L I C AT I O N
NOISELESSGENERATION
GSI 2015 innovation LWRT
soundproof panelsfor automotive
under body shields
It is not our style to make noise when we project something innovative. Our R&D, Project Management and Technical Team like to talk about new technologies only when we are 100% sure of their qualities and benefi ts in terms of production and business opportunities. ELISA time to market is just right now. The concept develops into the over-moulding of soundproof panels for automotive under body shields made in LWRT (Light Weight Reinforced Thermoplastics). ELISA is the choice of the new automotive generation.
Meet ELISA in GSI
PATENT & INNOVATION
dB
Electromagnetic Shielding for electric car battery box - complex cases
Battery boxes need electromagnetic shielding in order to avoid obnoxious interferences with electronic devices such as radio, cell phones, etc.
Nowadays shielding is achieved by co-molding aluminum frames with plastic, but due to the geometric complexity of the battery box lid shape, this technique is not very effective (results can be affected by the cracks that may take place on edges, e.g.), and competitors apply further layers of paint in order to cover such cracks and restore the complete shielding.
Our own solution features several layers of thin aluminum foil, its shape ensuring the full coverage of the area to be shielded when assembled to the lid.
PATENT & INNOVATION
CAMPO MAGNETICO
I DISPOSITIVI ELETTRICI FUNZIONANO CORRETTAMENTE
MINIMUM SHIELDING REQUEST
FREQUENCY
SHIE
LDIN
G
MHZ
GSI SOLUTION
dB
GSI INNOVATIONS ARE FOREVERwww.gsigroup.net
GSI GROUP S.p.A.via Enrico Fermi, 57 - 24020 Scanzorosciate (BG) - Italy
phone: +39 035 655524 - fax: +39 035 667159e-mail: [email protected] - web: www.gsigroup.net
33
34
C O R P O R A T E P R E S E N T A T I O N 2 0 1 7