Corning® Gorilla® Glass 6 Corning® Gorilla® Glass 6 is engineered to better survive drops from the worldwide average height. In lab tests, it successfully survives up to 1.6-meter drops onto rough surfaces, while still maintaining the superior scratch performance synonymous with Gorilla® Glass. At 1.6 meters, alternative aluminosilicate and soda lime glasses didn’t survive a single drop. Gorilla Glass 6 has up to 2x improvement in scratch performance compared to alternative aluminosilicate. Benefits • • Improved drop performance, up to 1.6m High resistance to scratch and sharp contact damage High retained strength after use Superior surface quality • • Viscosity Softening Point (10 7.6 poises) 885 °C Annealing Point (10 13.2 poises) 624 °C Strain Point (10 14.7 poises) 572 °C Properties Density 2.40g/cm 3 Young’s Modulus 77 GPa Poisson’s Ratio 0.21 Shear Modulus 31.9 GPa Vickers Hardness (200g load) Unstrengthened 611 kgf/mm 2 Strengthened 678 kgf/mm 2 Fracture Toughness 0.70 MPa m 0.5 Coefficient of Expansion (0-300°C) 75.2 x 10 -7 /°C Product Information Applications Ideal protective cover material for the front and back of all electronic devices: Smartphones • Notebook PCs • Tablets • Smartwatches and wearables • Smart Home devices • Cameras • Commercial and Point of Sale Displays • Thickness Standard 0.4 mm – 0.9 mm Chemical Strengthening Please contact a Corning Account Manager for chemical strengthening capability based on thickness and application. Optical Refractive Index* (590 nm) Core Glass 1.50 Compression Layer 1.51 Photo-elastic constant 29.8 nm/cm/MPa Transmission ≥ 90.5% @ 0.6 mm thickness 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 100 90 80 70 60 50 40 30 20 10 0 Wavelength (nm) % Transmittance Corning® Gorilla® Glass 6 Transmittance ≥ 90.5% Wavelength 380 2000 *Refractive index is used for FSM-based measurements since it is unaffected by ion-exchange conditions. Chemical Durability Durability is measured via weight loss per surface area after immersion in the solvents shown below. Values are highly dependent upon actual testing conditions. Reagent Time Temperature Weight Loss (°C) (mg/cm 2 ) HCI – 5% 24 hrs. 95 6.7 NH4F:HF – 10% 20 min. 20 1.6 HF – 10% 20 min. 20 22.7 NaOH – 5% 6 hrs. 95 2.7 Electrical 54 163 272 381 490 599 912 1499 1977 2466 2986 6.80 6.78 6.77 6.76 6.75 6.74 6.75 6.71 6.70 6.70 6.69 0.008 0.009 0.010 0.010 0.010 0.010 0.010 0.011 0.012 0.012 0.013 Loss Tangent Dielectric Constant Frequency (MHz) Terminated coaxial line similar to that outlined in NIST Technical Notes 1520 and 1355-R. Lorem ipsum

Corning® Gorilla® Glass 6 · Corning® Gorilla® Glass 6 Corning® Gorilla® Glass 6 is engineered to better survive drops from the worldwide average height. In lab tests, it successfully

Download PDF Report

Upload
others
View
10
Download
0

Embed Size (px)

Citation preview

Page 1: Corning® Gorilla® Glass 6 · Corning® Gorilla® Glass 6 Corning® Gorilla® Glass 6 is engineered to better survive drops from the worldwide average height. In lab tests, it successfully

Bene�ts • •

Improved drop performance, up to 1.6mHigh resistance to scratch and sharp contact damageHigh retained strength after useSuperior surface quality

• •

Viscosity Softening Point (107.6 poises) 885 °CAnnealing Point (1013.2 poises) 624 °CStrain Point (1014.7 poises) 572 °C

Properties Density 2.40g/cm3 Young’s Modulus 77 GPaPoisson’s Ratio 0.21Shear Modulus 31.9 GPaVickers Hardness (200g load) Unstrengthened 611 kgf/mm2

Strengthened 678 kgf/mm2

Fracture Toughness 0.70 MPa m0.5 Coe�cient of Expansion (0-300°C) 75.2 x 10-7/°C

Product Information

Applications Ideal protective cover material for the front and back of all

electronic devices: Smartphones • Notebook PCs• Tablets• Smartwatches

and wearables•

Smart Home devices• Cameras• Commercial and

Point of Sale Displays•

Thickness Standard 0.4 mm – 0.9 mm

Chemical Strengthening Please contact a Corning Account Manager for chemical strengthening capability based on thickness and application.

Optical Refractive Index* (590 nm) Core Glass 1.50 Compression Layer 1.51 Photo-elastic constant 29.8 nm/cm/MPa Transmission

≥ 90.5% @ 0.6 mm thickness

200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400

100

Wavelength (nm)

% Tr

ansm

ittan

ceCorning® Gorilla® Glass 6

Transmittance≥ 90.5%

Wavelength380 2000

*Refractive index is used for FSM-based measurements since it is una�ected by ion-exchange conditions.

Chemical Durability Durability is measured via weight loss per surface area afterimmersion in the solvents shown below. Values are highly dependent upon actual testing conditions. Reagent Time Temperature Weight Loss

(°C) (mg/cm2)

HCI – 5% 24 hrs. 95 6.7NH4F:HF – 10% 20 min. 20 1.6HF – 10% 20 min. 20 22.7NaOH – 5% 6 hrs. 95 2.7

Electrical

54163272381490599912

1499197724662986

6.806.786.776.766.756.746.756.716.706.706.69

0.0080.0090.0100.0100.0100.0100.0100.0110.0120.0120.013

Loss TangentDielectric ConstantFrequency (MHz)

Terminated coaxial line similar to that outlined in NIST Technical Notes 1520 and 1355-R.

Lorem ipsum