Upload
nguyenanh
View
221
Download
4
Embed Size (px)
Citation preview
EFFICIENT BY DESIGN
SELF-PRIMING PUMPSCORNELL PUMP COMPANY
STX, STL & STH SERIES
INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL® SYSTEM
FIVE-YEARWARRANTY
CORNELL
SELF-PRIMING PUMPSCORNELL
EFFICIENT, DURABLE, INNOVATIVE and dependable are all words that people use to describe Cornell pumps. The Cornell STX, STL & STH Self-Priming Lines are the newest products from Cornell Pump following a tradition of building world-class pumping equipment.
Efficient by Design is not only our mantra, but it is also our priority when designing our equipment. The Self-Priming Line exceeds the efficiency ratings of the competition by multiple efficiency points, without sacrificing lift capability. This improvement translates into energy cost savings over the life of the pump.
In addition to being focused on efficiency, Cornell Pump is also known for its innovative features. The Self-Priming Pumps follow this tradition by the addition of the Cycloseal® sealing system, which will extend your seal life.
Have an existing self-primer installed? Contact Cornell Pump regarding the retrofit program, which allows the Cornell STX rotating assemblies to retrofit into your existing pump volute.
SELF PRIMING PUMPFEATURES AND BENEFITS CORNELL CYCLOSEAL® SEALING SYSTEM with Run-Dry™, Type 2 silicon carbide seal and grit removal system.
CORNELL PUMP FIVE-YEAR WARRANTY is standard on all STX STL, & STH pumps.
17-4 PH STAINLESS STEEL SHAFT and oversized bearings extends the operating range and reduces shaft breakage.
HIGH-EFFICIENCY DESIGN pumps more liquid using less energy for substantial savings over the life of the pump.
ADJUSTABLE WEAR PLATE is abrasion resistant and easily accessible for replacement.
MODULAR DESIGN rotating assembly for easy conversion to SAE engine driven applications.
DOUBLE-LIP SEALS with atmospheric vents provide added protection for bearings.
DUCTILE IRON CONSTRUCTION for increased durability and resistance to wear.
HIGH RPM CAPACITY for high-head and engine driven applications.
DROP-IN REPLACEMENT for many existing installations.
OVERSIZED OIL RESERVOIR provides superior bearing cooling.
THREADED IMPELLER for increased strength.
SELF-PRIMING PUMPS CORNELL
REMOVABLE COVER PLATECornell STX, STL & STH Pumps have a removable coverplate that provides quick access to the pump’s impeller.
INNOVATIVE FEATURES
SOLIDS HANDLING IMPELLERDuctile iron two-blade impeller handles solids up to 3” in diameter. Impeller backvanes reduce the buildup of foreign matter and pressure in the stuffing box.
THE INNOVATIIVE CORNELL CYCLOSEAL® SEALING SYSTEM Eliminates air and gas pockets and keeps solids away from the seal area, extending seal life up to 3 times the industry average.
STX/STH/STL SPECIFICATIONS
HOUSING MATERIAL DUCTILE IRON ASTM A536
IMPELLER MATERIAL DUCTILE IRON ASTM A536
BACK PLATE DUCTILE IRON ASTM A536
DISCHARGE SIZES 2”, 3”, 4”, 6”, 8” AND 10”
FLOW RATES UP TO 4,200GPM / 954 M3/H
TDH UP TO 253’ / 77 M
SEAL TYPE TYPE II, MECHANICAL
SOLIDS HANDLING DIAMETER UP TO 3”
IMPELLER TYPE SEMI-OPEN
SHAFT 17-4 PH STAINLESS STEEL
STX/STH/STL OPTIONS• Discharge check valve• CD4MCu pump end• Self-cleaning wear plate• Complete replacement rotating assembly• Optional hardened ductile impeller• Optional hardened steel wear plate• V-belt drive• SAE engine mount• Air-release valve
SELF-PRIMING PUMPSCORNELL
STL SERIESDISCHARGE SIZE 8”
FLOW RATES Up to 2400 GPM / 545 m3/h
TDH Up to 140’ / 43m
SOLIDS HANDLING DIA.
Up to 3”
The STL series offers large flow rates, while maintaining lower head.The small form factor of the STL can fit into tight work areas, while delivering flows up to 2,400 GPM. Good solids handling capability, Cornell Quality, and Cycloseal® design set it apart.
STX SERIESDISCHARGE SIZES 3”, 4”, 6”, 8”, & 10”
FLOW RATES Up to 4200 GPM / 954 m3/h
TDH Up to 205’ / 62 m
SOLIDS HANDLING DIA.
Up to 3”
STX pumps offer better efficiency than competitors, while maintaining flange-to-flange interchangeability. More robust than standard self-primers, the oversize bearing frame and Cycloseal® design mean longer pump life and less maintenance than industry standards.
STH SERIESDISCHARGE SIZES 2”, 3”, and 4”
FLOW RATES Up to 2000 GPM / 454 m3/h
TDH Up to 253’ / 77 m
SOLIDS HANDLING DIA.
Up to 3”
STH series is high head WITHOUT requiring a booster pump. With heads up to 253’, excellent efficiencies and flow, the STH series is able to tackle the most demanding applications. No booster pump means reduced maintenance and a simpler, more reliable solution.
WE PUT OUR BEST IDEAS TO THE TESTOur modern hydraulics lab is the proving ground for all Cornell pumps. Our goal is to deliver the most efficient pumps at a time when energy costs are escalating. Technicians, under the direction of Registered Professional Engineers, conduct certified performance tests that precisely determine the performance and NPSH required for particular design conditions.
The focal point of the research facility is a 80,000 gallon (302,833 liters) closed loop system for running accurate low pressure tests. It can circulate up to 60,000 gallons (227,125 liters) of water per minute. All test motors are calibrated, and adhere to the Hydraulic Institute Standards in testing. A variable frequency drive will allow us to test pumps up to 4,000 horsepower at various speeds. Additional tests can be conducted upon customer request.
Impeller Back Vanes
Specifically-Calibrated Impeller
Quality Mechanical Seal
Backplate Deflector Vanes
Dished Backplate
Voluminous SpaceBehind Impeller
CYCLOSEAL® DESIGNThe patented, premium mechanical seal system that distinguishes our pumps from all others.
One of the main reasons STX pumps have a distinctive edge on competitors is Cornell’s patented Cycloseal design that removes solids and abrasive material from the seal area, while purging air and gas pockets. This innovative cyclonic action extends seal life and eliminates the need for venting or flush water.
EXTENDED SEAL LIFE: Cornell’s Cycloseal® design has proven itself in the toughest applications — in some cases more than tripling the normally expected mechanical seal life.
SYSTEM SAVINGS: The Cycloseal® system requires no external water flush, filters, grease cups, piping or instrumentation normally associated with packing or double mechanical seals.
MAINTENANCE SAVINGS: Longer seal life which translates into less pump down time and lower maintenance costs.
Photograph reprinted with the permission of John Crane. ©John Crane 2014
Watch the Cycloseal video online to see it in action: http://www.cornellpump.com/support/videos.html
TYPE II SEALSPart of the Cycloseal system
SELF-ALIGNING SEALS compensate for shaft movement, primary sealing wear, and machine tolerances.
NON-PUSHER DESIGN has no dynamic O-rings to hang up. All seal movement occurs in the bellows.
NON-CLOGGING SINGLE COIL SPRING is more dependable than multiple spring designs.
NO SET SCREWS to mar the shaft or sleeve.
TEMPERATURE LIMITS -40°F/-40°C to +160°F/70°C (Buna); -40°F/-40°C to +400°F/200°C (Viton®).*
SEAL FACES Silicon carbide vs. silicon carbide.
ELASTOMERIC BELLOWS Buna-N, Viton® .
HARDWARE Stainless steel.
*Consult Factory for high temperature applications
SELF-PRIMING PUMPS CORNELL
INNOVATIVE FEATURES
FEATURES A FIVE YEAR WARRANTY
DUAL PROTECTION OF BEARINGS — Atmospheric barrier and double lip seals provide bearing protection in the event of seal failure.
BACK PULL-OUT DESIGN The rotating assembly can be removed without dismantling the pump or disturbing the piping.
ROTATING ASSEMBLY Cornell’s STX rotating assembly allows for retrofits of existing installations to upgrade your existing pump with Cornell Pump quality and features.
HEAVY-DUTY BEARINGS Heavy-duty thrust bearings with Separate Oil Reserve sized for V-belt drive loads. Separate oil filling plugs for bearings and mechanical seals with sight gauges.
CORNELL
CAPACITY0 100 200 300 400 500 600 700 800 900
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
8.00"VARIOUS SEMI-OPEN 1.5" 1330 3" 2" 2
TYPE :SELF PRIMINGCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, close-coupled configuration.Other mounting styles or S.G. may require curve adjustments.
GPM
M3/HR
FEE
T
MET
ERS
Volute
SINGLE
0002 03/23/15
01/14/14CTG MODEL : 2STH CURVE NO:
2STHVA
17 FT. (5.2 M) NPSHR
2950 RPM
3 HP
0 20 40 60 80 100 120 140 160 180 200
0
10
20
30
40
50
60
TOTA
L D
YNA
MIC
HE
AD
0
20
40
60
80
100
120
140
160
180
200
220
30%
40%
40%
45%
45%
49%47%
47%
49%2400 RPM
1800 RPM
1200 RPM
5 HP7.5 HP 10 HP
15 HP
20 HP
20%
AE
10 FT. (3.0 M)
14 FT. (4.3 M)
25 HP
2700 RPM
2100 RPM
1500 RPM30%
4 HP
6 FT. (1.8 M)
OPERATING LIMIT
2STHBEP 49%8” IMPELLER DIA.
SELF-PRIMING PUMP CURVES CORNELL
GPM
M3/HR
FEET
CAPACITY
200
300
400
500
600
800
2000
3000
4000
5000
100
1000
TOTA
L D
YNAM
IC H
EAD
0
25
50
75
100
125
150
175
200
225
250
275
300
30 40 50 60 80 200
300
400
500
600
800
100
0
10
20
30
40
50
60
70
80
90
MET
ER
S
3STX
4STX
6STX
8STL
2STH
3STH
4STH 8STX
10STX
STX/STH/STL FAMILY MAP
SELF-PRIMING PUMP CURVESCORNELL
0 50 100 150 200 250 300 350 400 450 500
0
10
20
30
40
50
60
70
TOTA
L D
YNA
MIC
HE
AD
0
20
40
60
80
100
120
140
160
180
200
220
240
CAPACITY0 250 500 750 1000 1250 1500 1750 2000 2250
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
12.38"VARIOUS SEMI-OPEN 3" 1715 6" 4" 2
TYPE :SELF-PRIMERCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith cycloseal. Other mounting styles orS.G. may require curve adjustments.
GPM
M3/HR
FEE
T
MET
ERS
Volute
SINGLE
0000 09/08/14
09/08/14CTG MODEL : 4STH CURVE NO:
CTG
35%
4STHVA
23 FT. (7.0 M) NPSHR
2100 RPM
100 HP
40%45%
30%
50%
50%
55%
55%
57%
57%
59%
59%
75 HP
60 HP50 HP
40 HP
30 HP20 HP
10 HP
18 FT. (5.5 M)14 FT. (4.3 M)
10 FT. (3.1 M)
8 FT. (2.4 M)
1800 RPM
1500 RPM
1200 RPM
900 RPM
OPERATING LIMIT
60%
4STHBEP 60%12.38” IMPELLER DIA.
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
12.38"VARIOUS SEMI-OPEN 2.5" 1230 4" 3" 2
TYPE : SELF-PRIMERCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, close-coupled configuration.Other mounting styles or S.G. may require curve adjustments.
0 50 100 150 200 250 300 350 400
0
10
20
30
40
50
60
70
80
90
CAPACITY
TOTA
L D
YN
AM
IC H
EA
D
0
25
50
75
100
125
150
175
200
225
250
275
300
0 200 400 600 800 1000 1200 1400 1600 1800 GPM
M3/HR
FEE
T
Volute
SINGLE
0000 07/31/14
07/31/14CTG MODEL : 3STH CURVE NO:
CTG
45%
3STHVA
24 FT. (7.3M) NPSHR
2200 RPM
75 HP
MET
ERS
1800 RPM
1500 RPM
1200 RPM
50%
50%
55%
55%
58%
2000 RPM
900 RPM
58%
60 HP
50 HP
40 HP
30 HP
20 HP
10 HP
18 FT. (5.5M)
13 FT. (4.0)M)
9 FT. (2.7)M)
6 FT. (1.8)M)
40%
25 HP
15 HP
59%
3STHBEP 59% 12.38” IMPELLER DIA.
CAPACITY0 100 200 300 400 500 600 700 800 900
0 25 50 75 100 125 150 175 200
0
5
10
15
20
25
30
35
40
45
50
55
60
65
TOTA
L D
YNA
MIC
HE
AD
0
20
40
60
80
100
120
140
160
180
200
220
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
9.75"VARIOUS SEMI-OPEN 3" 1600 4" 4" 2
TYPE :SELF-PRIMINGCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal®.Other mounting stylesor S.G. may require curve adjustments.
GPM
M3/HR
FEE
T
MET
ERS
Volute
SINGLE
0003 08/20/15
06/14/13CTG MODEL : 4STX CURVE NO:
AE
40%
4STXVA
9 FT. (2.7 M)
900 RPM
1200 RPM
1800 RPM
1500 RPM
650 RPM
OPERATING LIMIT
2100 RPM
25 HP
7.5 HP3 HP
5 HP
15 HP
10 HP
20 HP
30 HP
45% 50%56%
56%
60%
20 FT. (6.1 M) NPSHR16 FT. (4.9 M)
12 FT. (4.7 M)
4STXBEP 60%2100 RPM
SELF-PRIMING PUMP CURVES CORNELL
3STXBEP 56%2200 RPM
CAPACITY0 100 200 300 400 500 600 700 800 900
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
VARIOUS 8.75" SEMI-OPEN 2.5" 1600 3" 3" 2
TYPE : SELF-PRIMINGCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal®.Other mounting stylesor S.G. may require curve adjustments.
0 25 50 75 100 125 150 175 200
0
10
20
30
40
50
60
TOTA
L D
YNA
MIC
HE
AD
0
20
40
60
80
100
120
140
160
180
200
220
GPM
M3/HR
FEE
T
MET
ERS
8 FT. (2.4M)
12 FT. (3.7M)
2 HP
18 FT. (5.5M) NPSHR50%
7.5 HP
Volute
SINGLE
0003 03/19/15
04/18/13CTG MODEL : 3STX CURVE NO:
AE
3 HP
45%
3STXVA
56%55%
55%
35% 40%
900 RPM
5 HP
15 HP1200 RPM
10 HP
1800 RPM
1500 RPM
650 RPM
20 HP
OPERATING LIMIT
2100 RPM
2200 RPM
1 HP
4STHBEP 60%12.38” IMPELLER DIA.
SELF-PRIMING PUMP CURVESCORNELL
0 100 200 300 400 500 600 700 800
0
10
20
30
40
50
60
70
TOTA
L D
YNA
MIC
HE
AD
0
20
40
60
80
100
120
140
160
180
200
220
240
CAPACITY0 400 800 1200 1600 2000 2400 2800 3200 3600
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
14.75"VARIOUS SEMI-OPEN 3" 2000 8" 8" 2
TYPE : SELF-PRIMINGCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mount configuration.Other mounting styles or S.G. may require curve adjustments.
GPM
M3/HR
FEE
T
MET
ERS
Volute
SINGLE
AA00 10/07/16
08/04/14AE MODEL : 8STX CURVE NO:
AE 8STXVA
1800 RPM
1500 RPM
1200 RPM
900 RPM
600 RPM
30%40%
50%
60%
65%
65%
67%
67%
69%20 FT
15 FT
10 FT
7 FT
125 HP
100 HP
75 HP
60 HP50 HP
40 HP30 HP
25 HP20 HP
15 HP10 HP7.5 HP
8STXBEP 69%1800 RPM
CAPACITY0 200 400 600 800 1000 1200 1400 1600 1800
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
VARIOUS 12.38" SEMI-OPEN 3" 1940 6" 6" 2
TYPE : SELF-PRIMINGCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal®.Other mounting stylesor S.G. may require curve adjustments.
0 50 100 150 200 250 300 350 400
0
10
20
30
40
50
60
TOTA
L D
YNA
MIC
HE
AD
0
20
40
60
80
100
120
140
160
180
200
220
GPM
M3/HR
FEE
T
MET
ERS
8 FT. (2.4M)
14 FT. (4.3M)
25 HP
23 FT. (7.0M) NPSHR
50%
60 HP
Volute
SINGLE
0005 10/13/14
04/02/13CTG MODEL : 6STX CURVE NO:
40 HP
45%
6STXVA
60%55%
55%
40%
900 RPM
50 HP
15 HP
1200 RPM
10 HP
1800 RPM
1500 RPM
20 HP
OPERATING LIMIT
1900 RPM10 FT. (3.1M)
18 FT. (5.5M)62%
58%
30 HP
62%
60%
58%
35%30%
650 RPM
5 HP
6STXBEP 62%1900 RPM
CORNELLSELF-PRIMING PUMPS
0 100 200 300 400 500 600 700 800 900 1000
0
10
20
30
40
50
60
70
TOTA
L D
YNA
MIC
HE
AD
0
20
40
60
80
100
120
140
160
180
200
220
240
CAPACITY0 500 1000 1500 2000 2500 3000 3500 4000 4500
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
14.75"VARIOUS SEMI-OPEN 3" 2625 10" 10" 2
TYPE : SELF-PRIMINGCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mount configuration.Other mounting styles or S.G. may require curve adjustments.
GPM
M3/HR
FEE
T
MET
ERS
Volute
SINGLE
0002 07/06/16
8/10/15
CTG/AE MODEL : 10STX CURVE NO:
AE
50%
10STXVA
1500 RPM
125 HP
1200 RPM
900 RPM
60%
70%75%
75%
70%
79%
60%
1600 RPM
14 FT. (4.3 M)
10 FT. (3.0 M)
12 FT. (3.7 M)
100 HP
75 HP60 HP50 HP40 HP
30 HP
1300 RPM
1400 RPM
1000 RPM
1100 RPM
800 RPM700 RPM600 RPM
25 HP20 HP15 HP10 HP
79%
81%16 FT. (4.9 M) NPSHR
8 FT. (2.4 M)6 FT. (1.8 M)
4 FT. (1.2 M)
10STXBEP 81%1600 RPM
CAPACITY0 400 800 1200 1600 2000 2400 2800 3200 3600
Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes
VARIOUS 12.38" SEMI-OPEN 3" 2410 8" 8" 2
TYPE : SELF-PRIMINGCornell Pump Company • Clackamas, Oregon
Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal®.Other mounting stylesor S.G. may require curve adjustments.
0 100 200 300 400 500 600 700 800
0
10
20
30
40
50
60
TOTA
L D
YNA
MIC
HE
AD
0
20
40
60
80
100
120
140
160
180
200
220
GPM
M3/HR
FEE
T
MET
ERS
12 FT. (3.7M)
75 HP
25 FT. (7.6M) NPSHR
50%
60 HP
Volute
SINGLE
0004 10/13/14
04/12/14CTG MODEL : 8STL CURVE NO:
40 HP
45%
8STLVA
60%55%
65%
900 RPM50 HP
15 HP
1200 RPM
10 HP
1800 RPM
1500 RPM
20 HP
OPERATING LIMIT
19 FT. (5.8M)65%
30 HP
67%
60%
67%
16 FT. (4.9M)
35%40%5 FT. (1.5M)
8 FT. (2.4M)
25 HP650 RPM
5 HP
8STLBEP 67%1800 RPM
8STXBEP 69%1800 RPM
6STXBEP 62%1900 RPM
Cycloseal® and Redi-Prime® are Registered Trademarks of Cornell Pump Company.
Cornell pumps and products are the subject of one or more of the following U.S. and foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001;
6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and foreign patent applications.
EFFICIENT BY DESIGN
SELF-PRIMING PUMPSCORNELL PUMP COMPANY
STX & STL SERIES
INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL® SYSTEM
FIVE-YEARWARRANTY
CORNELL SUBMERSIBLESCORNELL PUMP COMPANY
EFFICIENT BY DESIGNEFFICIENT BY DESIGN
EFFICIENT, RELIABLE, TROUBLE-FREE
EFFICIENT BY DESIGN
HYDRO TURBINECORNELL PUMP COMPANY
AGRICULTURECORNELL PUMP COMPANY
EFFICIENT BY DESIGN
INDUSTRIALCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
Immersible motors are designed to be used in dry-pit applications where there is a possibility of flooding. Why take a submersible motor that was designed to run submerged 100% of the time and modify it to run in air 99% (or most of the time) and submerged 1% of the time (in case of a flood)? This seems backwards. The correct approach is to take a TEFC motor that is designed to run in air 100% of the time and adapt it to run submerged 1% of the time (in case of a flood).
IMMERSIBLE MOTOR BASIC DESIGN:The basic design of the immersible pump/motor incorporates a premium efficient, inverter duty, P-Base or C-Face TEBC motor (totally enclosed, blower cooled). The motor, as the name implies, is totally enclosed and cooled by a blower on top of the motor. If the motor becomes submerged, the blower motor fan shuts down without affecting the main motor. While the motor is temporarily submerged, the media cools the motor just like a true submersible. A special conduit box is used to prevent water leakage into the motor. The motor is designed to prevent infiltration of water along the shaft and into the motor by utilizing a triple redundant sealing system, including a patented hydroseal design. The motor-end bell housing incorporates the ‘inverted cup’ principle, which traps an air bubble under the motor as water rises, thus keeping water away from the shaft seal. The shaft is fitted with a hydroseal, which expells water and further reduces the chance of water reaching the shaft seals.
The Immersible motor can withstand up to 30 feet of submergence depth for a two-week period. This exceeds the requirements of Immersible motors that is described in the industry standard “Index of
Protection” IP67. Competitive designs only allow immersion of the motor for a period of time not exceeding 30 minutes at a submergence level of 3 ‘. Hardly enough time to deal with any kind of flooding emergency!
THE IMMERSIBLE MOTOR CONCEPT:
CORNELL PUMP COMPANY // 16261 SE 130th AVE CLACKAMAS, OR2013 © ALL RIGHTS RESERVED
IMMERSIBLECORNELL PUMP COMPANY
FOOD PROCESSCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
WATER TRANSFERCORNELL PUMP COMPANY
HYDRAULIC FRACTURING
EFFICIENT BY DESIGN
REDI-PRIME PUMPSBOMBAS DE CEBADO ASISTIDO REDI-PRIME®
CORNELL PUMP COMPANY
Cornell Pump Company16261 SE 130th AveClackamas, OR 97015P: (503) 653-0330F: (503) 653-0338
Efficient by Design
CORNELLPUMP.COM©2011 CORNELL PUMP COMPANY
LÍNEA DE PRODUCTOS DE CORNELL
Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.
Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001;
6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.
*To visit our REDI_PRIME webpage on your smartphone, scan the QR code below:
Cycloseal®, Hot Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.
Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001; 6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.
self-priming
refrigeration municipal food process industrial
submersible hydro-turbine agricultureTHE CORNELL PRODUCT LINE
MINE DEWATERINGCORNELL PUMP COMPANY
WHEN RELIABILITY MATTERS
BOMBAS AUTOCEBANTES BOMBAS SUMERGIBLES TURBINAS BOMBAS PARA AGRICULTURA Y RIEGO
BOMBAS PARA REFRIGERACIÓN
BOMBAS DE CEBADO ASISTIDO
BOMBAS PARA ELSECTOR PÚBLICO
DESAGÜES EN MINERÍA
TRANSPORTE HIDRÁULICODE ALIMENTOS
CORPORATIVO
BOMBAS PARA EL SECTOR INDUSTRIAL
MOTORES INMERSIBLES
CUANDO LA FIABILIDAD ES LO QUE IMPORTA
MUNICIPALITIESCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
MINING
EFFICIENT BY DESIGN
CORNELL PUMP COMPANY
EFFICIENT BY DESIGN
CUTTER PUMPS
EFFICIENT BY DESIGN
CORNELL PUMP COMPANY
CHOPPERCORNELL PUMP COMPANY
EFFICIENT BY DESIGNEFFICIENT BY DESIGNEFFICIENT BY DESIGN
END GUNBOOSTER PUMP
CORNELL PUMP COMPANY
EFFICIENT BY DESIGN
FOR CENTER PIVOT IRRIGATION
HYDRAULIC SUBSCORNELL PUMP COMPANY
• Models Available - 4NNT, 6NNT, 8NNT, etc.• Discharge Sizes Available - 4 to 8 inch• Standard Construction - Cast Iron, Class 30• Optional Construction - 316SS, CD4MCU, Ductile Iron• Permco hydraulic drive
• Various adaptor plates available for hydraulic motor fit• Heavy duty shaft / bearing frame assembly• Heavy duty “wet end” construction• Manufactured in the United States
• Premium Hydraulic Efficiencies, 76 to 80% BEP• 3 inch or larger solid handling capability• Total Dynamic Head: 50 to 360 feet• Capacity: 200 to 7000 GPM
• General Agriculture, Industrial and Municipal Applications• Rental Applications• Mining Applications• Flood Control Applications• Construction / Dewatering Applications
STANDARD SPECIFICATIONS
FEATURES AND BENEFITS
PERFORMANCE CHARACTERISTICS
TYPICAL MARKETS
EFFICIENT BY DESIGN
MANURE PUMPSCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
MP SERIESCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
MINING PUMPS DESIGNED FOR COARSE ABRASIVES
MX SERIESCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
MX SERIESCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
HIGH HEAD MINING PUMPS
SLURRY PUMPS
SLURRY PUMPSCORNELL PUMP COMPANY
CURVES
EFFICIENT BY DESIGN
SELF PRIMING SUBMERSIBLE
HYDRO TURBINE
AGRICULTURAL REFRIGERATIONMUNICIPALMINE DEWATERINGFOOD PROCESS
CUTTERCHOPPER EDGE™ HYDRAULIC SUBS MANURE MP SERIES
MX SERIES MX MINING REDI-PRIME® SLURRY
INDUSTRIAL
IMMERSIBLE
REFRIGERATIONCORNELL PUMP COMPANY
EFFICIENT BY DESIGN
WATER TRANSFER
CORNELLPUMP.COM©2015 CORNELL PUMP COMPANY
MARKET AND PRODUCT LINEOIL & GAS
CORNELL PUMP COMPANY
EFFICIENT BY DESIGN
OIL & GAS
AUTHORIZED CORNELL PUMP DISTRIBUTOR
Cornell Pump CompanyClackamas, Oregon, USA
P: +1 (503) 653-0330F: +1 (503) 653-0338
EFFICIENT BY DESIGN
V-SERIES PUMPSCORNELL PUMP COMPANY
FOR MEDIUM DUTY APPLICATIONS
V SERIES
CYCLOSEAL®CORNELL PUMP COMPANY
PATENTED LONG LASTING, LEAK-FREE FLUSHLESS SEALING SYSTEM
EFFICIENT BY DESIGN
Celebrating
20YEARS
1994-2014SYSTEMSYSTEM
CYCLOSEALCYCLOSEAL
CYCLOSEAL®