Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Cordless nutrunner & Accessories
1
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Integrated Controller
§ Controller and amplifier are integrated into the tool
§ Wireless transfer of results data to receiving server
§ Simple integration into an existing infrastructure
§ High process reliability
2
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Easy to read graphic display
§ Direct access to information
§ Immediate display of the result status (OK/NOK)
of the tightening event
§ Very robust display glass assures minimum risk for injuries
§ Selective day or night vision
§ Picture viewer
3
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Browser based operating system
§ Operating system is located and operating in the tool
§ Display of the operating software via any web browser, without a
need for any software installation
§ Use of any web browser enabled device to access the software
§ Simple handling, direct access
§ Easy set up
Firmware + HMI
4
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Adjustable tightening position illumination
§ Definition of different color and intensity levels for various tightening
situations
§ Settings for flashing or static LEDs for
OK or NOK results
5
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Stay-Alive functionality during battery exchange
§ Stay alive function of up to 20 seconds
(pending wireless traffic level, network connectivity etc.)
§ Controller is getting temporary power from the integrated
power supply during battery exchange with minimal impact
on cycle time
§ No time loss due to reboot of the controller
6
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Quick access to information
§ Configuration and result data can be stored on
integrated MicroSD card
§ Quick access to display information in multiple languages
§ Manual, homologation data, machine capability certificate,
documentation stored on the MicroSD card
§ Quick diagnostics via wireless access or cable connection
(MicroUSB interface)
7
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Backup / restore function
1. NEXO OS 2. HMI (with V1200 and later)
8
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Restore
9
Backup / restore function
Backup
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Individual cell monitoring
• Voltagelevelsinindividualcellsarege2ngbalancedandpreventoverhea6ngofinlinecells
Cooling
• Collingventsallowforairflowduringchargingofba;ery
Construction with cell holder
• Construc6onwithshockpreven6onintheposi6oningofindividualcells
Integrated Intelligence
• Communication between tool and charger
Cell selection
• Individualcellsareselectedforbestqualitytoassurehighestcyclesforindustrialuse
The intelligent battery management system
10
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Nexo cordless nutrunner – Angle head nutrunner
NXA011S-36V 3,0 - 11 Nm
850 rpm
NXA015S-36V 3,0 - 15 Nm
600 rpm
NXA030S-36V 9,0 - 30 Nm
310 rpm
NXA050S-36V 15 - 50 Nm
185 rpm
NXA065S-36V 20 - 65 Nm
135 rpm
NXV012T-36V 1,8 – 12 Nm
880 rpm
Available with an integrated barcode scanner
11
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Nexo cordless nutrunner – pistolgrip nutrunner
NXP012QD-36V 1,8 - 12 Nm
880 rpm
Available with an integrated barcode scanner
12
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Nexo cordless nutrunner – PE Components Available with an integrated barcode scanner
13
*** 1,8 - 12 Nm
880 rpm
NXA100S-36V 3,0 - 100 Nm
80 rpm
*** 1,8 - 12 Nm
880 rpm
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Barcode Scanner
§ Barcode scanner integrated into the tool controller
§ Input size up to 256 bytes
§ Use of the barcode as ID code
§ Use of the scan to select programs or jobs
§ Identification of the part
§ Activation of scan via red tool buttons below the display
14
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Accessories
NX-BP36V Slide-in battery
pack
NX-A2 Programming
adapter
NX-BC36V Charger
NX-ACCESS Access point
NXAMT Turnable
suspension
NX-PT Tool holder
NXPR Suspension (for pistol)
NXPH Extra handle
NX-SD MicroSD-card
NX-R Colored rings
15
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Nexo cordless nutrunner Accessories
NX-BP36V Mounting aid
NX-BC36V Tool holder
NXAP030 Protective
insulation for battery
assembly
NXPP012 Protective
insulation for battery
assembly
NXPAH1 Right-angle
protection cover
NXPAH2 Right-angle
protection cover
NX-HD Holder
for accessories
16
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Operating System NEXO-OS V1100
17
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Nexo cordless nutrunner Nexo main menu
§ Intuitive web browser
§ All in One Software
§ Online configuration
§ Diagnosis
18
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Nexo cordless nutrunner Mode functionality
§ Mode functions like cycle counter,
Open Protocol, scanner, different ID Input ,
VW-XML
§ ID Code tied to the result data
§ Configuration of up to two ID-Inputs
§ Selection of tightening program or tightening
job via scanning of barcode (ASCII Codes)
19
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Nexo cordless nutrunner Tightening program
§ Standard programming of tightening process
with target and monitoring functions of
- torque, angle and time
§ Global settings in Start step
§ Intuitive programming requires minimal training,
reduces errors
§ Simple straight forward parameter settings
§ Up to twelve programming steps
20
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Nexo cordless nutrunner Job functionality
§ Definition and execution of process sequences involving programs and
action steps (e.g scans)
§ Parameterization of jobs via steps
§ Up to 256 jobs possible with each job containing
up to 20 steps
§ Configuration of ID-Input steps
§ Importing and exporting of jobs
21
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Operating System NEXO-OS V1200
22
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Additional settings for Standard Nexo result (1) Starting with V1200 the following additional settings are possible: § hardware = tool code (e.g. NXA030S-36V) § mac0 = MAC address of the tool § ip0 = IP address of the tool § sw version= software version § sw build = build version of software ( e.g. SP2, FT8) § total angle threshold nom = targeted total angle value starting from
threshold § total angle threshold act = actual value achieved for angle starting from
threshold § last step column =last step result column number § last step result row = last step result row number
Nexo cordless nutrunner
23
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Additional settings for Standard Nexo result (2) § step type = step type § points = measuring points of curve § angle scale = multiplication factor for angle values § torque scale = multiplication factor for torque values § time scale = multiplication factor for time values
à Upon delivery all previous settings (as in NxFw1100) are active and above additional settings can be activated
Nexo cordless nutrunner
24
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
û
ü
With FTPS there are two connectivity modes: § Explicit mode ç This mode is supported in the Nexo!
In this mode The FTPS client is explicitly asking for a secure connection to the server each time and establishes a mutually accepted encryption code for the transmission. If the client does not ask for an encryption the FTPS server can accept or reject the connection
§ Implicit mode ç This mode is not supported in the Nexo! In this implicit mode the connection is immediately encrypted and there are is no negotiation possible about the connection modus. The FTPS server expects a TLS/SSL note (hello) from the FTPS client at the beginning of the communication. Without this hello note the server will not start or maintain a connection
Nexo cordless nutrunner
25
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Standard Nexo-> HTTP-PQM § In combination with the Process Quality Manager via the HTTP the result
data can be transferred from the tool controller to the PQM. § Settings for the transfer:
- User Agent: SYS350 - Content type: application/json
Nexo cordless nutrunner
26
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
• Nm • Ftlb • Inlb • Kpm • Kgfm • Kgm
New engineering units Nexo cordless nutrunner
The new engineering units can be set globally as a default setting in the configuration menu or can be set individually for programs in the program menu
27
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Display of connectivity status: Nexo cordless nutrunner
At least one data service not online.
No data service online.
All active data services online.
28
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Assignment of PLC signals to the display of the tool Nexo cordless nutrunner
Menu > Actual Values • You can assign PLC
signals to three location on the tool display and select those via the corresponding red menu buttons underneath the display. To visualize the signals put the display in “ Actual Values” setting
29
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Confirm connectivity status of the Nexo to various protocols Nexo cordless nutrunner
Menu->Services->FTP and see the IP address the server the Nexo is connected to
30
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Standard Nexo result parameters § With V1200 the selection of the parameters that are transferred via the
“standard Nexo” – Format under FTP, NX-SD, NFS are possible
Nexo cordless nutrunner
Sample of a .json file
31
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
HTTP settings in the Standard Nexo format Nexo cordless nutrunner
Settings à Standard Nexo à HTTP
32
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
VW-XML protocol Nexo cordless nutrunner
Note: That this version of the XML is applicable only for VW
33
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Nexo cordless nutrunner New MIDs in Rexroth Open Protocol
§ MID 0127 Abort Job § MID 0410 request AutoDisable Setting § MID 0411 response Autodisable Setting
34
Nexo cordless nutrunner
Internal | 06/08/2016 | DC-IA/SWT3 | © Bosch Rexroth AG 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.
Thanks for your attention!
35