COPPER BERYLLIUM ALLOYS

- C17200- AMS 4530- AMS 4532- AMS 4533- AMS 4534- AMS 4535- AMS 4650- AMS 4651- ASTM-B196, B643- ASNA 3400, 3414, 3417 - ASNA 6110- BMS 7-353 Type 1, 2- QQ-C-530- DMS 1904, 2088- AMS-H-7199

TOUGHMET® SPINODALBRONZE ALLOYS

- C72900- AMS 4595- AMS 4596- AMS 4597- AMS 4598- AIMS 02-04-002- ABS 5152- ABS 5849- BMS 7-373 Class 90, 100, TS- MTL 4112- Ma-1705-12, 13

For more information on our aerospace alloys, visit: www.Materion.com/aerospace

AEROSPACE ALLOYS

AD0093 12.18

HEALTH & SAFETY

Handling copper beryllium in solid form poses no special health risk. Like many industrial materials, beryllium-containing materials may pose a health risk if recommended safe handling practices are not followed. Inhalation of airborne beryllium may cause a serious lung disorder in susceptible individ-uals. The Occupational Safety and Health Administration (OSHA) has set mandatory limits on occupational respiratory exposures. Read and follow the guidance in the Material Safety Data Sheet (MSDS) before working with this material. For additional information on safe handling practices or technical data on copper beryllium, contact Materion Brush Performance Alloys, Technical Service Department at 1.800.375.4205.

For more information about our products, please call Materion Technical Service at 800-375-4205 Web: www.materion.com/aerospaceEmail: BrushAlloys-info@materion.com

Equacast® and ToughMet® are trademarks of Materion Brush Inc.Materion Performance Alloys

6070 Parkland Boulevard Mayfield Heights, OH 44124 USA p 800.321.2076 +1.216.486.4200 www.materion.com/alloys

Alloy Temper Product Form Size Range Specification

Copper Beryllium C172Brush Alloy 25

AnnealedTB00 Rod & Bar .188” - 14”

(4.8 - 356 mm) AMS 4650

Copper Beryllium C172Brush Alloy 25

HardTD04 Rod & Bar .188” - 2.50”

(4.8 - 63.5 mm) AMS 4651

Copper Beryllium C172Brush Alloy 25

AnnealedTB00 Sheet, Strip & Plate .004” - .250”

(0.10 - 6.4 mm) AMS 4530

Copper Beryllium C172Brush Alloy 25

1/2 HardTD02 Sheet & Strip .004” - .188”

(0.10 - 4.8 mm) AMS 4532

Copper Beryllium C172Brush Alloy 25

ATTF00 Rod & Bar .188” - 14”

(4.8 - 356 mm)AMS 4533

ASNA 3417

Copper Beryllium C172Brush Alloy 25

HTTH04 Rod & Bar .188” - 2.50”

(4.8 - 63.5 mm) AMS 4534

Copper Beryllium C172Brush Alloy 25

ATTF00 Tube

O.D. 1.75” - 8.60”(44 - 220 mm )I.D. .812” - 6.50”(20 - 165 mm)

AMS 4535ASNA 6110

Copper Beryllium C172Brush Alloy 25 Type 1, 2

Rod & Bar .188” - 14”(4.8 - 356 mm)

BMS 7-353Tube

O.D. 1.75” - 8.60”(44 - 220 mm)

I.D. 812” - 6.50”(20 - 165 mm)

ToughMet®

C72900

AT

TX00

Rod & Bar1” - 8.50”

(25 - 216 mm)

AMS 4596

ABS 5849

MTL 4112Ma-1705-13

TubeO.D. 1.1” - 13.60”

(28 - 330 mm)

AMS 4598ABS 5152

Ma-1705-13

Rod Up to 4” (100 mm) BMS 7-373(Class 100 & Class 90)

Plate 0.188” - 4.50”(4.750 - 114 mm) AMS-4595

TS RodUp to 3.25” (82.5 mm) AMS 4597

AEROSPACE ALLOYS

BMS 7-373 Class TSMa-1705-12

Up to 6.0” (152 mm)

BMS 7-373 (Class 90)O.D. Up to 8.56” (217 mm)