Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Product Code
Size (mm) Qty Bag
Qty
733012 20 x 20 1 15733100 25 x 25 1 15733111 32 x 32 1 10
TYPE - PPF
Coupler
Pipe FittingsManufactured by Elysee
Used to connect two pieces of MDPE pipe. Both pipes should be the same diameter.
Product Code Size Qty Bag
Qty
733188 20mm x 1/2" 1 25733199 25mm x 3/4" 1 20733200 32mm x 1" 1 10
TYPE - PPF
Female Adaptor
Used to connect MDPE pipe to a male BSP threaded fitting.
Product Code Size Qty Bag
Qty
733155 20mm x 1/2" 1 25733166 25mm x 3/4" 1 20733177 32mm x 1" 1 10
TYPE - PPF
Male Adaptor
Used to connect MDPE pipe to a female BSP threaded fitting.
Extensive range of WRAS approved compression fittings for connecting MDPE pipe. Impact resistant and simple push-in & turn action required for installation.
• No special tools required• Durable and high resistance to impact• Dismountable if required to allow for alteration/adjustments• Designed to withstand sub-zero temperatures• WRAS approved for potable water and to ISO 17885
Assembly Instructions
• Undo the nut up to the last thread. Do not remove the nut from the body.
• Cut the pipe straight, remove burrs & chamfer the end of the pipe with a chamfering tool.
• Mark the length on the PE pipe, to which the pipe must be pushed into the fitting.
*Lubricate the end of the pipe.
1 • Push the PE pipe into the fitting, through the nut, split ring and O-ring, as far as it will go until it meets the 1st resistance. (The mark on the pipe is now just in front of the nut).
2
• Firmly hand tighten the nut. For sizes of 40mm and above, use a wrench for a further half turn for final tightening.
3
Notes:• Lubrication of the pipe end is optional and will ease insertion of the pipe (use silicone lubricant).• The fitting can safely be used again after disassembling.• The full hydraulic seal is achieved when the pipe passes through the O-ring.
Product Code Size Qty Bag
Qty
733422 20mm x 1/2" 1 10733433 25mm x 3/4" 1 10
TYPE - PPF
Wall Plate Elbow (PP)
Product Code
Size (mm)
BagQty
733366 20 50733377 25 50733388 32 20
TYPE - PPF
Pipe Liner
Must be used in all MDPE pipe connections to add strength by supporting the shape of the pipe.
Product Code Size Qty Bag
Qty
733277 1/2" x 20mm 1 10733288 1/2" x 25mm 1 10733299 3/4" x 25mm 1 10
TYPE - PPF
Imp/Metric Coupler
Allows the connection of metric MDPE pipe (blue or black) to old imperial sized black pipes.
Product Code
Size (mm) Qty Bag
Qty
733122 20 1 20733133 25 1 20733144 32 1 10
TYPE - PPF
End Plug
Provides a secure and sometimes temporary end to a pipework system.
Product Code
Size (mm) Qty Carton
Qty
733399 20 x 20 1 65733400 25 x 25 1 55733411 32 x 32 1 40
TYPE - PPF
Stop Tap (PP)
Used to securely isolate or stop the flow of water in a system.
Product Code
Size (mm) Qty Bag
Qty
733211 20 x 20 x 20 1 15733222 25 x 25 x 25 1 10733233 32 x 32 x 32 1 5
TYPE - PPF
90 Degree Tee
Provides the ability to connect three separate lengths of pipe into one. MDPE pipes should all be the same diameter.
Product Code
Size (mm) Qty Bag
Qty
733300 20 x 15 1 10733311 25 x 15 1 20733322 25 x 22 1 10
TYPE - PPF
Copper Adaptor
Provides a connection from MDPE pipe to standard copper pipework.
Used for fitting to a wall and allows the connection of MDPE pipe through to a BSP threaded tap.
Product Code
Size (mm) Qty Bag
Qty
733244 20 x 20 1 20733255 25 x 25 1 15733266 32 x 32 1 5
TYPE - PPF
90 Degree Elbow
Used to change the direction of pipework in a system by 90 degrees. Pipes should be the same diameter.
Product Code
Size (mm) Qty Bag
Qty
733333 25 x 20 1 15733344 32 x 20 1 10733355 32 x 25 1 10
TYPE - PPF
Reducing Set
Used to connect two pieces of MDPE pipe of different diameters.
1606380
72 73
Screws
Fasteners & Fixings
AnchorsN
ailsSecurity &
Ironmongery
Gate & Fence H
ardware
Powertool
AccessoriesH
and Tools & Accessories
Builders M
etal Work
Building C
hemicals
Site ProtectionTapes & Adhesives
Scre
ws
Fast
ener
s &
Fixi
ngs
Anch
ors
Nai
lsSe
curit
y &
Ironm
onge
ryG
ate
& Fe
nce
Har
dwar
ePo
wer
tool
Ac
cess
orie
sH
and
Tool
s &
Acce
ssor
ies
Build
ers
Met
al W
ork
Build
ing
Che
mic
als
Site
Pro
tect
ion
Tape
s & A
dhes
ives
Fasteners & Fixings Fasteners & Fixings