Upload
others
View
7
Download
1
Embed Size (px)
Citation preview
VB-202A
Eriez offers a new line of solid state Feeder Controls with state-of-the-art electronics at competitive prices. The company’s line features three styles of controls...UniCon, the standard “base model” control, UniCon HC (High Current) control, and the G Series controls.
The UniCon series is designed to provide a precise amount of vibration for Eriez vibratory feeders as well as competitive electromagnetic feeders. These controls accommodate the vast majority of industry applications. Eriez’ full or half wave operat ion capability allows a plant to operate one control while competitive units provide half wave operation only.
In addition to the three control series presented here, Eriez can modify or custom design an electromagnetic feeder control to suit your specific application.
416-1M-AHA-PC ERIEZ MANUFACTURING CO ©2016 PRINTED IN USA
©2016 Eriez Magnetics All Rights Reserved
World Authority in Separation Technologies Headquarters: 2200 Asbury Road, Erie, PA 16506-1402 U.S.A. Telephone: 814-835-6000 • 800-345-4946 • Fax: 814-838-4960 • International Fax: 814-833-3348 Web Site: http://www.eriez.com e-mail: [email protected]
Eriez and Eriez Magnetics are registered trademarks of Eriez Manufacturing Co, Erie, PA
Manufacturing Facilities: AUSTRALIA • BRAZIL • CANADA • CHINA • INDIA • JAPAN • MEXICO • SOUTH AFRICA • UNITED KINGDOM • UNITED STATES
Controls for Vibratory Equipment
ElEctromagnEtic
Vibratory Equipment
2
Control Model Voltage Amperage
Enclosure NEMA Type
DC/Analog Signal
Capable
Closed Loop
Option Bias / GainManual
Adjustment
Full or Half Wave
Capable
Certifications
CE CUL UL ESA*
UniCon 115 or 230 2 to 15 N12 / IP54 • • Pot • • • •
UniCon 115 or 230 2 to 15 Chassis • • Pot • •
UniCon HC 115 or 575 15 to 40 N4 • • • Pot • • • •
UniCon HC 115 or 575 15 to 40 Chassis • • • Pot • • • •
G30 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G40 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G50 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G60 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G30 Hz HW 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
All G Series 115 or 230 15 N4X • • • Touch Pad • •
All G Series 115 or 230 15 Chassis • • • Touch Pad • •
Solid STATe ConTrolS
Eriez Vibratory Equipment
compact ElEctromagnEtic FEEdErsEriez’ broad range of compact feeders handle most any dry bulk solid material. The A, C, HS and HD models provide the best vibratory solutions to handle your medium to light duty applications. Whether you have a dense metal powder or a flexible leafy material, Eriez has the vibratory solution.
HEavy duty ElEctromagnEtic and mEcHanical FEEdErsOur line of heavy duty electromagnetic and mechanical feeders provide the robust design required to handle the toughest applications. When the precise feed control of an electromagnetic feeder is required or the high tonnage capabilities of our HVF mechanical feeder, Eriez can address the most difficult environments with our heavy duty feeder solutions.
controls For
ElEctromagnEtic and mEcHanical convEyorsEriez versatile vibratory conveyors move and distribute bulk material across many processing environments. Conveyors are available with dust covers, base or suspension mounting, sanitary construction and many other features.
Bin , HoppEr and cHutE v iBratorsEriez provides electromagnetic and rotary electric hopper and chute vibrators to help insure your bulk material flows smoothly through your process. Wherever your bulk material hand-up in a hopper or chute, an Eriez vibrator may be the cost effective solution you’re looking for.
* ESA certification upon request
VB-202A
Eriez offers a new line of solid state Feeder Controls with state-of-the-art electronics at competitive prices. The company’s line features three styles of controls...UniCon, the standard “base model” control, UniCon HC (High Current) control, and the G Series controls.
The UniCon series is designed to provide a precise amount of vibration for Eriez vibratory feeders as well as competitive electromagnetic feeders. These controls accommodate the vast majority of industry applications. Eriez’ full or half wave operat ion capability allows a plant to operate one control while competitive units provide half wave operation only.
In addition to the three control series presented here, Eriez can modify or custom design an electromagnetic feeder control to suit your specific application.
416-1M-AHA-PC ERIEZ MANUFACTURING CO ©2016 PRINTED IN USA
©2016 Eriez Magnetics All Rights Reserved
World Authority in Separation Technologies Headquarters: 2200 Asbury Road, Erie, PA 16506-1402 U.S.A. Telephone: 814-835-6000 • 800-345-4946 • Fax: 814-838-4960 • International Fax: 814-833-3348 Web Site: http://www.eriez.com e-mail: [email protected]
Eriez and Eriez Magnetics are registered trademarks of Eriez Manufacturing Co, Erie, PA
Manufacturing Facilities: AUSTRALIA • BRAZIL • CANADA • CHINA • INDIA • JAPAN • MEXICO • SOUTH AFRICA • UNITED KINGDOM • UNITED STATES
Controls for Vibratory Equipment
ElEctromagnEtic
Vibratory Equipment
2
Control Model Voltage Amperage
Enclosure NEMA Type
DC/Analog Signal
Capable
Closed Loop
Option Bias / GainManual
Adjustment
Full or Half Wave
Capable
Certifications
CE CUL UL ESA*
UniCon 115 or 230 2 to 15 N12 / IP54 • • Pot • • • •
UniCon 115 or 230 2 to 15 Chassis • • Pot • •
UniCon HC 115 or 575 15 to 40 N4 • • • Pot • • • •
UniCon HC 115 or 575 15 to 40 Chassis • • • Pot • • • •
G30 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G40 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G50 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G60 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G30 Hz HW 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
All G Series 115 or 230 15 N4X • • • Touch Pad • •
All G Series 115 or 230 15 Chassis • • • Touch Pad • •
Solid STATe ConTrolS
Eriez Vibratory Equipment
compact ElEctromagnEtic FEEdErsEriez’ broad range of compact feeders handle most any dry bulk solid material. The A, C, HS and HD models provide the best vibratory solutions to handle your medium to light duty applications. Whether you have a dense metal powder or a flexible leafy material, Eriez has the vibratory solution.
HEavy duty ElEctromagnEtic and mEcHanical FEEdErsOur line of heavy duty electromagnetic and mechanical feeders provide the robust design required to handle the toughest applications. When the precise feed control of an electromagnetic feeder is required or the high tonnage capabilities of our HVF mechanical feeder, Eriez can address the most difficult environments with our heavy duty feeder solutions.
controls For
ElEctromagnEtic and mEcHanical convEyorsEriez versatile vibratory conveyors move and distribute bulk material across many processing environments. Conveyors are available with dust covers, base or suspension mounting, sanitary construction and many other features.
Bin , HoppEr and cHutE v iBratorsEriez provides electromagnetic and rotary electric hopper and chute vibrators to help insure your bulk material flows smoothly through your process. Wherever your bulk material hand-up in a hopper or chute, an Eriez vibrator may be the cost effective solution you’re looking for.
* ESA certification upon request
UniCon HC Controls (High Current)The single base model UniCon replaces many older style controls and offers more features. Its compact design and standard features address most customer applications. The unit is packaged in a NEMA12 (IP54) enclosure and carries CE, CUL and UL certification while the chassis enclosed model is CE certified. It can be configured for either 115V or 240V operation, full or half wave output operation and can be operated either from a manual potentiometer on the front of the control box or an internal 4-20mA or 0-10V DC signal.
The UniCon HC Control extends the range of the UniCon family to include controls that have the majority of features required built into a standard design.
The UniCon HC has the ability to operate feeders with a voltage and amperage range that go beyond the original UniCon control with precision.
FEATURES :• Easy to use, economical, variable speed control
• Rotary dial controls speed and feed rate
• Chassis mount, NEMA 12 (IP54) enclosure standard
• Operates on 115 or 240 volts
• Rated from 2 to 15 amps at 115 volts and 1 to 15 amps at 240 volts
• Includes bias and gain internal pots to set the operating (displacement) range of feeder. Sets span of the pot on lid
• Accepts 4-20 MA or 0-10 VDC signals
• Include interlock for remote on/off
• Full wave and Half wave capable
• NEMA 12 version: UL, CUL, and CE tagged; Chassis version: CE tagged
FEATURES :
UniCon Controls
Compact Electromagnetic Feeders / Conveyors
A ModelC ModelHS Model
Large Electromagnetic Feeders
B Model
Recommended for:
G-Series ControlsAccepts up to 12 amps at full voltage. Controls are capable of auto sensing line voltage without on site programming and can operate at feeders frequencies of 30, 40, 50 or 60 Hz.
The G-Series is equipped with soft-start adjustability which eliminates the feeder over-stroking during start up and shut down and prevents premature wear. For applications requiring rapid on/off cycling, settings can be altered for quicker cycle time.
Controls can be equipped with an accelerometer attached to the feeder. The accelerometer constantly reads the tray amplitude and communicates it to the control thereby preventing premature component wear.
FEATURES :• Full range of customized feeder controls
• 115 and 230 volts
• Nema 12 (IP54) enclosure standard
• Accept 4-20 MA signal
• Remote on/off capability
• Dual rate-of-feed available
• Panel mount version
• Closed-Loop operation with accelerometer available to maintain consistent tray deflection
• Standard units are CE tagged
• ESA evaluation and tagging for Canada available
• Digital display
• 12 amp maximum for NEMA 12 version and 15 amp maximum for NEMA 4x and panel mount
3 4 5
Panel mountversions available
Chassis Mount Control
Variable Speed ControlsFOR ELECTROMAGNETIC EQUIPMENT
Compact Electromagnetic Feeders / Conveyors
A ModelC ModelH DeflectionHS Speed VMC Conveyor
Large Electromagnetic Feeders
B Model
Recommended for:
5 7/8 [149] ø3/16 [ø5] 2 PLACES
HEATSINK
SPEEDPOTENTIOMETER
POWER SWITCH
7 5/8 [194]
8 1/16 [205]
5 21/32 [144]
4 27/32 [123]
27/32 [21]
Accelerometer used with G-Series and Unicon HC Controls
Dimensions are in inches [mm]
GAIN BIAS
PEPE 22PE 21 2324 4 85 6 7 109 11
Compact Electromagnetic Feeders / Conveyors
A ModelC ModelH Speed HS Model
Large Electromagnetic Feeders
B Model
Bin Vibrators
115 and 230 Volt
Recommended for:
Dimensions are in inches [mm] Dimensions are in inches [mm]
Unicon Chassis Mount Control
READ ALL
HAZARDOUSVOLTAGE
ELECTRIC SHOCK
ARC FLASHSHOCK
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
MFS
P O
F I
%%
F1
F2
G Series Panel Mount Control
3 5/32 [80]
5 5/16 [135]
4 23/32 [120]
5 1/2 [140]
4 11/32 [110]
115/230VAC SELECTOR SWITCH
GAIN TRIM POTENTIOMETER
BIAS TRIMPOTENTIOMETER
EXTERNAL SETPOINT SELECTOR
INTERNAL/EXTERNALSETPOINT TERM. BLOCK
FULL/HALFWAVESELECTOR SWITCH
ø3/16 [ø5] 4 PLACES
MANU
AUTO
SPEED
ON
READ ALL
HAZARDOUSVOLTAGE
ELECTRIC SHOCK
ERIEZ MAGNETICS
ARC FLASHSHOCK
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
15 3/4 [400]13 7/16 [342]
SPEEDPOTENTIOMETERSTART/STOPPUSHBUTTON
POWER SWITCHMANUAL/AUTOSELECTOR SWITCH
19 11/16 [500]
20 7/8 [530]
10 3/8 [264]8 7/8 [226]
6 5/16 [160]
3 5/32 [80]
8 1/16 [205]
7 19/32 [193]
LED DISPLAY FOR PROGRAMMING & OPERATING KEYPAD
FEEDER ON
FEEDER OFF
ON/OFF SWITCH
(2) ø3/16 [ø5]
UP/DOWN CURSOR
8 [203]
11 1/4 [286]
9 7/8 [251]
12 5/8 [321] 11 7/32 [285]
6 3/8 [162]
Unicon NEMA 12 (IP54) ControlNEMA 4 Unicon HC 30-40 Amp Models G Series NEMA 12 (IP54) Control
MANU
AUTO
SPEED
ON
READ ALL
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
HAZARDOUSVOLTAGE
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
ELECTRIC SHOCK
ERIEZ MAGNETICS
ARC FLASHDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
SHOCK
NEMA 4 Unicon HC 5-25 Amp Models
11 13/16 [300]9 1/2 [242]
SPEEDPOTENTIOMETER
START/STOPPUSHBUTTON
POWER SWITCHMANUAL/AUTOSELECTOR SWITCH
15 3/4 [400]
16 15/16 [430]
10 9/16 [268]8 7/8 [226]
• Additional features to UniCon model
• Models available from 5 to 40 amps
• 25 and 40 amp base models
• 115, 230, 380, 460 and 575 volts
• Accept 4-20 MA signal
• Remote on/off capability
• Bias and Gain pots
• Auto/Manual selector switch
• Chassis mount and NEMA 4 enclosures standard
• Closed-Loop operation with accelerometer available to maintain tray deflection
• UL, CUL and CE tagged
UniCon HC Controls (High Current)The single base model UniCon replaces many older style controls and offers more features. Its compact design and standard features address most customer applications. The unit is packaged in a NEMA12 (IP54) enclosure and carries CE, CUL and UL certification while the chassis enclosed model is CE certified. It can be configured for either 115V or 240V operation, full or half wave output operation and can be operated either from a manual potentiometer on the front of the control box or an internal 4-20mA or 0-10V DC signal.
The UniCon HC Control extends the range of the UniCon family to include controls that have the majority of features required built into a standard design.
The UniCon HC has the ability to operate feeders with a voltage and amperage range that go beyond the original UniCon control with precision.
FEATURES :• Easy to use, economical, variable speed control
• Rotary dial controls speed and feed rate
• Chassis mount, NEMA 12 (IP54) enclosure standard
• Operates on 115 or 240 volts
• Rated from 2 to 15 amps at 115 volts and 1 to 15 amps at 240 volts
• Includes bias and gain internal pots to set the operating (displacement) range of feeder. Sets span of the pot on lid
• Accepts 4-20 MA or 0-10 VDC signals
• Include interlock for remote on/off
• Full wave and Half wave capable
• NEMA 12 version: UL, CUL, and CE tagged; Chassis version: CE tagged
FEATURES :
UniCon Controls
Compact Electromagnetic Feeders / Conveyors
A ModelC ModelHS Model
Large Electromagnetic Feeders
B Model
Recommended for:
G-Series ControlsAccepts up to 12 amps at full voltage. Controls are capable of auto sensing line voltage without on site programming and can operate at feeders frequencies of 30, 40, 50 or 60 Hz.
The G-Series is equipped with soft-start adjustability which eliminates the feeder over-stroking during start up and shut down and prevents premature wear. For applications requiring rapid on/off cycling, settings can be altered for quicker cycle time.
Controls can be equipped with an accelerometer attached to the feeder. The accelerometer constantly reads the tray amplitude and communicates it to the control thereby preventing premature component wear.
FEATURES :• Full range of customized feeder controls
• 115 and 230 volts
• Nema 12 (IP54) enclosure standard
• Accept 4-20 MA signal
• Remote on/off capability
• Dual rate-of-feed available
• Panel mount version
• Closed-Loop operation with accelerometer available to maintain consistent tray deflection
• Standard units are CE tagged
• ESA evaluation and tagging for Canada available
• Digital display
• 12 amp maximum for NEMA 12 version and 15 amp maximum for NEMA 4x and panel mount
3 4 5
Panel mountversions available
Chassis Mount Control
Variable Speed ControlsFOR ELECTROMAGNETIC EQUIPMENT
Compact Electromagnetic Feeders / Conveyors
A ModelC ModelH DeflectionHS Speed VMC Conveyor
Large Electromagnetic Feeders
B Model
Recommended for:
5 7/8 [149] ø3/16 [ø5] 2 PLACES
HEATSINK
SPEEDPOTENTIOMETER
POWER SWITCH
7 5/8 [194]
8 1/16 [205]
5 21/32 [144]
4 27/32 [123]
27/32 [21]
Accelerometer used with G-Series and Unicon HC Controls
Dimensions are in inches [mm]
GAIN BIAS
PEPE 22PE 21 2324 4 85 6 7 109 11
Compact Electromagnetic Feeders / Conveyors
A ModelC ModelH Speed HS Model
Large Electromagnetic Feeders
B Model
Bin Vibrators
115 and 230 Volt
Recommended for:
Dimensions are in inches [mm] Dimensions are in inches [mm]
Unicon Chassis Mount Control
READ ALL
HAZARDOUSVOLTAGE
ELECTRIC SHOCK
ARC FLASHSHOCK
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
MFS
P O
F I
%%
F1
F2
G Series Panel Mount Control
3 5/32 [80]
5 5/16 [135]
4 23/32 [120]
5 1/2 [140]
4 11/32 [110]
115/230VAC SELECTOR SWITCH
GAIN TRIM POTENTIOMETER
BIAS TRIMPOTENTIOMETER
EXTERNAL SETPOINT SELECTOR
INTERNAL/EXTERNALSETPOINT TERM. BLOCK
FULL/HALFWAVESELECTOR SWITCH
ø3/16 [ø5] 4 PLACES
MANU
AUTO
SPEED
ON
READ ALL
HAZARDOUSVOLTAGE
ELECTRIC SHOCK
ERIEZ MAGNETICS
ARC FLASHSHOCK
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
15 3/4 [400]13 7/16 [342]
SPEEDPOTENTIOMETERSTART/STOPPUSHBUTTON
POWER SWITCHMANUAL/AUTOSELECTOR SWITCH
19 11/16 [500]
20 7/8 [530]
10 3/8 [264]8 7/8 [226]
6 5/16 [160]
3 5/32 [80]
8 1/16 [205]
7 19/32 [193]
LED DISPLAY FOR PROGRAMMING & OPERATING KEYPAD
FEEDER ON
FEEDER OFF
ON/OFF SWITCH
(2) ø3/16 [ø5]
UP/DOWN CURSOR
8 [203]
11 1/4 [286]
9 7/8 [251]
12 5/8 [321] 11 7/32 [285]
6 3/8 [162]
Unicon NEMA 12 (IP54) ControlNEMA 4 Unicon HC 30-40 Amp Models G Series NEMA 12 (IP54) Control
MANU
AUTO
SPEED
ON
READ ALL
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
HAZARDOUSVOLTAGE
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
ELECTRIC SHOCK
ERIEZ MAGNETICS
ARC FLASHDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
SHOCK
NEMA 4 Unicon HC 5-25 Amp Models
11 13/16 [300]9 1/2 [242]
SPEEDPOTENTIOMETER
START/STOPPUSHBUTTON
POWER SWITCHMANUAL/AUTOSELECTOR SWITCH
15 3/4 [400]
16 15/16 [430]
10 9/16 [268]8 7/8 [226]
• Additional features to UniCon model
• Models available from 5 to 40 amps
• 25 and 40 amp base models
• 115, 230, 380, 460 and 575 volts
• Accept 4-20 MA signal
• Remote on/off capability
• Bias and Gain pots
• Auto/Manual selector switch
• Chassis mount and NEMA 4 enclosures standard
• Closed-Loop operation with accelerometer available to maintain tray deflection
• UL, CUL and CE tagged
UniCon HC Controls (High Current)The single base model UniCon replaces many older style controls and offers more features. Its compact design and standard features address most customer applications. The unit is packaged in a NEMA12 (IP54) enclosure and carries CE, CUL and UL certification while the chassis enclosed model is CE certified. It can be configured for either 115V or 240V operation, full or half wave output operation and can be operated either from a manual potentiometer on the front of the control box or an internal 4-20mA or 0-10V DC signal.
The UniCon HC Control extends the range of the UniCon family to include controls that have the majority of features required built into a standard design.
The UniCon HC has the ability to operate feeders with a voltage and amperage range that go beyond the original UniCon control with precision.
FEATURES :• Easy to use, economical, variable speed control
• Rotary dial controls speed and feed rate
• Chassis mount, NEMA 12 (IP54) enclosure standard
• Operates on 115 or 240 volts
• Rated from 2 to 15 amps at 115 volts and 1 to 15 amps at 240 volts
• Includes bias and gain internal pots to set the operating (displacement) range of feeder. Sets span of the pot on lid
• Accepts 4-20 MA or 0-10 VDC signals
• Include interlock for remote on/off
• Full wave and Half wave capable
• NEMA 12 version: UL, CUL, and CE tagged; Chassis version: CE tagged
FEATURES :
UniCon Controls
Compact Electromagnetic Feeders / Conveyors
A ModelC ModelHS Model
Large Electromagnetic Feeders
B Model
Recommended for:
G-Series ControlsAccepts up to 12 amps at full voltage. Controls are capable of auto sensing line voltage without on site programming and can operate at feeders frequencies of 30, 40, 50 or 60 Hz.
The G-Series is equipped with soft-start adjustability which eliminates the feeder over-stroking during start up and shut down and prevents premature wear. For applications requiring rapid on/off cycling, settings can be altered for quicker cycle time.
Controls can be equipped with an accelerometer attached to the feeder. The accelerometer constantly reads the tray amplitude and communicates it to the control thereby preventing premature component wear.
FEATURES :• Full range of customized feeder controls
• 115 and 230 volts
• Nema 12 (IP54) enclosure standard
• Accept 4-20 MA signal
• Remote on/off capability
• Dual rate-of-feed available
• Panel mount version
• Closed-Loop operation with accelerometer available to maintain consistent tray deflection
• Standard units are CE tagged
• ESA evaluation and tagging for Canada available
• Digital display
• 12 amp maximum for NEMA 12 version and 15 amp maximum for NEMA 4x and panel mount
3 4 5
Panel mountversions available
Chassis Mount Control
Variable Speed ControlsFOR ELECTROMAGNETIC EQUIPMENT
Compact Electromagnetic Feeders / Conveyors
A ModelC ModelH DeflectionHS Speed VMC Conveyor
Large Electromagnetic Feeders
B Model
Recommended for:
5 7/8 [149] ø3/16 [ø5] 2 PLACES
HEATSINK
SPEEDPOTENTIOMETER
POWER SWITCH
7 5/8 [194]
8 1/16 [205]
5 21/32 [144]
4 27/32 [123]
27/32 [21]
Accelerometer used with G-Series and Unicon HC Controls
Dimensions are in inches [mm]
GAIN BIAS
PEPE 22PE 21 2324 4 85 6 7 109 11
Compact Electromagnetic Feeders / Conveyors
A ModelC ModelH Speed HS Model
Large Electromagnetic Feeders
B Model
Bin Vibrators
115 and 230 Volt
Recommended for:
Dimensions are in inches [mm] Dimensions are in inches [mm]
Unicon Chassis Mount Control
READ ALL
HAZARDOUSVOLTAGE
ELECTRIC SHOCK
ARC FLASHSHOCK
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
MFS
P O
F I
%%
F1
F2
G Series Panel Mount Control
3 5/32 [80]
5 5/16 [135]
4 23/32 [120]
5 1/2 [140]
4 11/32 [110]
115/230VAC SELECTOR SWITCH
GAIN TRIM POTENTIOMETER
BIAS TRIMPOTENTIOMETER
EXTERNAL SETPOINT SELECTOR
INTERNAL/EXTERNALSETPOINT TERM. BLOCK
FULL/HALFWAVESELECTOR SWITCH
ø3/16 [ø5] 4 PLACES
MANU
AUTO
SPEED
ON
READ ALL
HAZARDOUSVOLTAGE
ELECTRIC SHOCK
ERIEZ MAGNETICS
ARC FLASHSHOCK
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
15 3/4 [400]13 7/16 [342]
SPEEDPOTENTIOMETERSTART/STOPPUSHBUTTON
POWER SWITCHMANUAL/AUTOSELECTOR SWITCH
19 11/16 [500]
20 7/8 [530]
10 3/8 [264]8 7/8 [226]
6 5/16 [160]
3 5/32 [80]
8 1/16 [205]
7 19/32 [193]
LED DISPLAY FOR PROGRAMMING & OPERATING KEYPAD
FEEDER ON
FEEDER OFF
ON/OFF SWITCH
(2) ø3/16 [ø5]
UP/DOWN CURSOR
8 [203]
11 1/4 [286]
9 7/8 [251]
12 5/8 [321] 11 7/32 [285]
6 3/8 [162]
Unicon NEMA 12 (IP54) ControlNEMA 4 Unicon HC 30-40 Amp Models G Series NEMA 12 (IP54) Control
MANU
AUTO
SPEED
ON
READ ALL
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
DANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
HAZARDOUSVOLTAGE
WARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNINGWARNING
ELECTRIC SHOCK
ERIEZ MAGNETICS
ARC FLASHDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGERDANGER
SHOCK
NEMA 4 Unicon HC 5-25 Amp Models
11 13/16 [300]9 1/2 [242]
SPEEDPOTENTIOMETER
START/STOPPUSHBUTTON
POWER SWITCHMANUAL/AUTOSELECTOR SWITCH
15 3/4 [400]
16 15/16 [430]
10 9/16 [268]8 7/8 [226]
• Additional features to UniCon model
• Models available from 5 to 40 amps
• 25 and 40 amp base models
• 115, 230, 380, 460 and 575 volts
• Accept 4-20 MA signal
• Remote on/off capability
• Bias and Gain pots
• Auto/Manual selector switch
• Chassis mount and NEMA 4 enclosures standard
• Closed-Loop operation with accelerometer available to maintain tray deflection
• UL, CUL and CE tagged
VB-202A
Eriez offers a new line of solid state Feeder Controls with state-of-the-art electronics at competitive prices. The company’s line features three styles of controls...UniCon, the standard “base model” control, UniCon HC (High Current) control, and the G Series controls.
The UniCon series is designed to provide a precise amount of vibration for Eriez vibratory feeders as well as competitive electromagnetic feeders. These controls accommodate the vast majority of industry applications. Eriez’ full or half wave operat ion capability allows a plant to operate one control while competitive units provide half wave operation only.
In addition to the three control series presented here, Eriez can modify or custom design an electromagnetic feeder control to suit your specific application.
416-1M-AHA-PC ERIEZ MANUFACTURING CO ©2016 PRINTED IN USA
©2016 Eriez Magnetics All Rights Reserved
World Authority in Separation Technologies Headquarters: 2200 Asbury Road, Erie, PA 16506-1402 U.S.A. Telephone: 814-835-6000 • 800-345-4946 • Fax: 814-838-4960 • International Fax: 814-833-3348 Web Site: http://www.eriez.com e-mail: [email protected]
Eriez and Eriez Magnetics are registered trademarks of Eriez Manufacturing Co, Erie, PA
Manufacturing Facilities: AUSTRALIA • BRAZIL • CANADA • CHINA • INDIA • JAPAN • MEXICO • SOUTH AFRICA • UNITED KINGDOM • UNITED STATES
Controls for Vibratory Equipment
ElEctromagnEtic
Vibratory Equipment
2
Control Model Voltage Amperage
Enclosure NEMA Type
DC/Analog Signal
Capable
Closed Loop
Option Bias / GainManual
Adjustment
Full or Half Wave
Capable
Certifications
CE CUL UL ESA*
UniCon 115 or 230 2 to 15 N12 / IP54 • • Pot • • • •
UniCon 115 or 230 2 to 15 Chassis • • Pot • •
UniCon HC 115 or 575 15 to 40 N4 • • • Pot • • • •
UniCon HC 115 or 575 15 to 40 Chassis • • • Pot • • • •
G30 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G40 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G50 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G60 Hz 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
G30 Hz HW 115 or 230 12 N12 / IP54 • • • Touch Pad • • •
All G Series 115 or 230 15 N4X • • • Touch Pad • •
All G Series 115 or 230 15 Chassis • • • Touch Pad • •
Solid STATe ConTrolS
Eriez Vibratory Equipment
compact ElEctromagnEtic FEEdErsEriez’ broad range of compact feeders handle most any dry bulk solid material. The A, C, HS and HD models provide the best vibratory solutions to handle your medium to light duty applications. Whether you have a dense metal powder or a flexible leafy material, Eriez has the vibratory solution.
HEavy duty ElEctromagnEtic and mEcHanical FEEdErsOur line of heavy duty electromagnetic and mechanical feeders provide the robust design required to handle the toughest applications. When the precise feed control of an electromagnetic feeder is required or the high tonnage capabilities of our HVF mechanical feeder, Eriez can address the most difficult environments with our heavy duty feeder solutions.
controls For
ElEctromagnEtic and mEcHanical convEyorsEriez versatile vibratory conveyors move and distribute bulk material across many processing environments. Conveyors are available with dust covers, base or suspension mounting, sanitary construction and many other features.
Bin , HoppEr and cHutE v iBratorsEriez provides electromagnetic and rotary electric hopper and chute vibrators to help insure your bulk material flows smoothly through your process. Wherever your bulk material hand-up in a hopper or chute, an Eriez vibrator may be the cost effective solution you’re looking for.
* ESA certification upon request