Upload
mohammed-donham
View
226
Download
1
Tags:
Embed Size (px)
Citation preview
Control of Microbial Growth
A few terms
• Bacteriostatic: inhibits bacterial growth• Bactericidal: something capable of killing
bacteria• Antiseptic: an agent that is used to inhibit/kill
bacterial growth on skin and mucus membranes• Disinfectant: an agent that is used to inhibit/kill
bacterial growth on inanimate objects
What factors influence the success of microbial control?
• What type of organism(s) are you targeting?
• What type of environment are you treating?
Are all microbes equally sensitive?
What parts of a bacterial cell are sensitive to physical treatments
and chemicals?
• Plasma membrane
• DNA and proteins
**
Physical Methods
• Heat– Dry: kills by oxidation, ex: incineration– Moist: promotes coagulation of proteins
• Boiling (100oC)• Autoclave(121oC, 15lbs/sq inch)• Pasteurization
– Classic-63oC for 30 minutes– HTST-72oC for 15 seconds– UHT-140oC for 3 seconds
Autoclave
Autoclaves work due to steam under pressure
**Indicators used in autoclaving**
What does a color change on the autoclave tape indicate? Why would it be necessary to also place an indicator in the center of the pack? What type of biological indicator is used for quality assurance in an autoclave monitoring program? Why? Where would the biological indicator be placed during the autoclaving procedure?
What if the substance is heat sensitive?
• Filtration is the best choice
• Pore sizes can be either .45um or .22um
Physical Methods
• Low temperature: freezing does not kill bacteria, most cultures are stored at -80oC
• Dessication: remove the water and bacteria can remain viable
Physical Methods
• Radiation– Ionizing radiation (gamma rays, x-rays)– Non-ionizing radiation (uv rays)– Microwaves
Electromagnetic Spectrum
Chemical Methods
• Most are only able to reduce the numbers of organisms, not achieve sterility
• Types of chemicals– Phenol and phenolics– Halogens– Alcohols– Heavy metals– Soaps– Quaternary Ammonium compounds– Biguanides
As a general rule: if you need to achieve sterility then you should be thinking about physical, not chemical methods of microbial control.
Evaluation of chemicals: disc diffusion method
Chemical control: choosing the right germicidal chemical
• Goal: sterility vs. disinfection; level of disinfection required dictates potency of chemical required
• Toxicity: risk benefit analysis• Activity in presence of organic material: most are
diminished or inactivated• Sensitivity of the material to be treated• Residue: toxic or corrosive vs residual desired
antimicrobial effect• Cost and availability• Storage and stability: concentrate vs stock solution• Environmental risk: antimicrobials in the environment
Chemical control
• PhenolicsDestroy cytoplasmic membranes, denature proteins (binds
to tyrosine, alters cell membranes)• Triclosan• Hexachlorophene
Target: vegetative bacteria +/- mycobacteria; not sporocidal; inadequate if viricidal activity is required; leave an active antimicrobial residue
Chemical control
• Halogens1. Iodine (binds to tyrosine, alters cell membranes)
• Tincture• Iodophore
Target: all bacteria, fungi, most endospores, and some viruses
2. Chlorine (strong oxidizing agent)
Target: all types of microbes and viruses; inactivated by organic matter
Chemical Control• Alcohols
– Mechanism of action is protein denaturation, can also dissolve lipids
– Most common are ethanol and isopropanolTarget: kill vegetative cells and fungi, do not kill endospores and
some naked viruses
Chemical control
• Heavy metals exert “oligodynamic action” = ability of very low concentrations of metals to kill microbes: interfere with function of enzymes by binding to –SH
• Silver (and formerly, copper, mercury, lead, arsenic)
Chemical control
• Surfactants (soaps)– Little value as an antiseptic– Acid-anionic surface-active sanitizers are
important in cleaning of dairy equipment and utensils
Chemical control
• Quaternary Ammonium Compounds (Quats)– Group of positively charged detergentsAction: react with the cell membrane → reduced surface
tension, membrane damage
Target: kill many vegetative bacteria and enveloped viruses, fungi; do NOT kill endospores, Mycobacteria, or naked viruses
Chemical control
– Biguanides (chlorhexidine)• Used in antiseptic products• Adheres to skin and mucus membranes, low toxicity• Action: membrane disruption• Target: wide range of bacteria, fungi, and some
enveloped viruses; does not kill endospores; will not destroy naked viruses
Which antiseptic works the best?