Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
CONTRACT LAW AND CONTRACT PROCUREMENT FOR LOCAL GOVERNMENTS
Presented to:
North Central Local Government Management Association
April 10, 2019
Peter Johnson and Ryan BortolinPresented by:
• Contracts in British Columbia and most of Canada(Quebec is an exception) largely governed bycommon law
• Common law has evolved through centuries of judicialdecisions
• British Columbia “received” English common law as ofNovember 19, 1858, when British Columbia wasproclaimed a Crown Colony
Contract Law 101
• Constitutional authority for contract law – largely a matter of provincial power over property and civil rights
• British Columbia has enacted statutes that alter/supplement the common law of contract:- Law and Equity Act- Sale of Goods Act- Business Practices and Consumer Protection Act
Contract Law 101
• A contract may be defined as:- A legally enforceable agreement- Between two or more parties who intend to enter
into a contract- Formed by offer and acceptance- Supported by consideration
Contract Law 101
Key point:
• Whether the intention to form a contract is present in any case is determined objectively, from the standpoint of the reasonable observer
Contract Law 101
• “Legally enforceable”- Means the Courts will provide a remedy for a
breach:• Damages• Specific performance
- Examples of “agreements” the Courts will not enforce:
• Bare promises (no consideration)• Memorandum of Understanding (but, may be
enforceable as a contract, if all elements of a contract are present!)
• Agreements to agree
Contract Law 101
• “Legally enforceable”:- Courts will not enforce contracts where there is:
• Duress• Fraud• Lack of legal capacity
• Infants• Mental incompetence
• Where mandatory statutory preconditions have not been fulfilled.
Contract Law 101
“Between two or more parties”:• Privity of contract• You can’t enter into a contract with yourself!
- Exception: under the Property Law Act a person may transfer interests in land to themselves –includes easements, rights of way and covenants.
Contract Law 101
Who can enter into a contract?• Individuals
- sole proprietorships - watch for contracts with unincorporated businesses – proper party may be “John Doe, Doing Business as ABC Plumbing”
• Partnerships- a business relationship that exists where two or
more persons carry on business in common with a view to profit
- each partner is an agent of the firm and of the other partners
Contract Law 101
• Who can enter into a contract?- Corporations
• corporate status (confirm with corporate registries)
• indoor management rule (discussed below)• Interpretation Act, s. 17 refers to the power of a
corporation to contract in its own name- Government - Corporations and other bodies established by
statute• power to contract may be limited by statute
Contract Law 101
• “Formed by offer and acceptance”- Offer vs. Invitation to treat- Acceptance must be unequivocal- Counter-offers- Communication of acceptance- Revocation of offers
Contract Law 101
• “Formed by offer and acceptance”- Agreements to agree- Unilateral contracts
Contract Law 101
Contract Law 101
• “Supported by consideration”- Contract law requires there to be an exchange of
value between the parties• Peppercorn (or “One Dollar”) consideration –
courts will generally not inquire into the adequacy of consideration
• Exchange of promises/performance may be sufficient consideration
- Exception – contracts “under seal” may not require an exchange of consideration
• Example: bid bonds; performance bonds
Contract Law 101
Must a contract be in writing?• In many cases, no – oral contracts/contracts partly in
writing are in most cases legally enforceable.• Contracts may be formed through a combination of
discussions and documents, or by an exchange of emails
Contract Law 101
Requirements for writing- contracts respecting land or disposition of land:• Law and Equity Act requires a written document
signed by the “party to be charged” with an indication as to the existence of the agreement and its subject matter
- alternative to writing – act or acquiescence by party to be charged; or
- person alleging contract has relied on the contract and changed their position such that an inequitable result requires enforcement
Contract Law 101
Contracting with a corporation – “indoor management rule”:• parties contracting with a corporation, acting in good
faith and without knowledge of an irregularity, are entitled to assume that the corporation’s internal requirements for contract approval have been observed
• application to local governments discussed below
Contract Law 101
Anatomy of a formal written contract (typical terms):• Date:
– Usually set out at the top of the first page, either a “reference” date or the date the agreement is actually signed
• “The parties”:– The agreement will identify the parties to it by their
full legal names, usually on page one– It is important to verify that corporate parties are
duly registered, in good standing and properly identified (use Business Corporation Number or Society Number)
Contract Law 101
Anatomy of a formal written contract (typical terms):• Recitals:
– The “Whereas” provisions.– Set out the background to the agreement, and
may state in general terms the parties’ purpose and intention.
– Can provide a useful aid in interpretation in the event of a dispute.
Contract Law 101
Anatomy of a formal written contract (typical terms):• Consideration clause:
“Now this agreement witnesses that in consideration of the sum of $1.00 paid by each party to the other, and other good and valuable consideration, the sufficiency of which is hereby acknowledged, the parties agree as follows.”
Contract Law 101
Anatomy of a formal written contract (typical terms):• Definitions:
– A useful drafting convention that adds clarity, brevity to the agreement
– Important to ensure that defined terms are used consistently throughout the agreement
Contract Law 101
Anatomy of a formal written contract (typical terms):• Covenants:
– The main part of the agreement – The promises each side makes, to do or refrain
from doing certain things in order to fulfill the bargain
– May be expressed in positive or negative terms
Contract Law 101
Anatomy of a formal written contract (typical terms):• Representations and warranties:
– A party verifies that certain facts or circumstances are true, and may be relied on by the other party
– Examples: • that internal corporate procedures have been
complied with• that the subject of the agreement meets certain
standards, i.e. compliance with environmental laws
Contract Law 101
Anatomy of a formal written contract (typical terms):• Conditions:
– The agreement may state that the obligation of the parties to perform is subject to fulfillment of conditions
– Conditions may be dependent on matters beyond the control of the parties (true conditions precedent) i.e. “subject to subdivision approval of the approving officer”
– Conditions may also be dependent on matters within the control of a party, i.e. “subject to approval of the Board/Council”
Contract Law 101
Anatomy of a formal written contract (typical terms):• Other key terms:
– Term of the agreement – when does it commence and when does it end?
– Rights of renewal or extension– Remedies in event of default– Early termination– Limitations on assignment of the agreement– Dispute resolution– Confidentiality/non-disclosure (may be an issue for
local government because of FIPPA)
Contract Law 101
Anatomy of a formal written contract (typical terms):• Other key terms:
– Insurance requirements – should be reviewed by insurance advisor (i.e. MIABC) as well as legal counsel
– Indemnities – need to be reviewed carefully to ensure local government is not taking on unusual liabilities, or liabilities not covered by insurance
• Note than agreements will sometimes state that indemnities survive the termination of the contract
Contract Law 101
Anatomy of a formal written contract (typical terms):• Boiler plate, including:
– Time is of the essence– Further assurances– Waiver/amendments must be in writing– “Entire agreement”– Governing law/forum selection – Counterpart clause
Contract Law 101
Anatomy of a formal written contract (typical terms):• Execution clause and signature blocks
– signatures provide evidence of the contracting party’s identity, and of their intention to be bound by the agreement
• Schedules to the Agreement, if applicable
Contract Law 101
Note that enforceable contracts may be formed in less formal circumstances, including:• “letter agreements” • exchange of emails
Contract Law 101
Terms that are not expressly stated may be implied:• Based on custom or usage• As the legal incidents of certain classes of
contract• Based on the presumed intention of the parties
where necessary to give business efficacy to the contract or where required by the “officious bystander” test
Contract Law 101
• Local Government Act section 263• Regional District boards have the power to make
agreements concerning: - Regional district services- Operation and enforcement in relation to the
board’s exercise of regulatory authority- Management of property
Local Government Contracts
Regional Districts – Corporate Power to Contract
• Regional District boards also have the power to make agreements with a public authority- Respecting activities, works, services within the
powers of a party to the agreement- Operation and enforcement in relation to a party’s
exercise of regulatory authority- Management of property held by a party to the
agreement
Local Government Contracts
Regional Districts – Corporate Power to Contract
• Municipalities have the capacity, rights, powers and privileges of a natural person of full capacity (Community Charter, s. 8(1))– “natural persons” have the capacity to enter into
contracts• Natural person powers of a municipality may be
exercised outside of the municipality’s boundaries (CC s. 11(2))
Local Government Contracts
Municipalities – Corporate Power to Contract
Who can exercise a local government’s power to contract?• Powers, duties and functions of the local government
are to be exercised by the Council/Board unless otherwise provided - LGA s. 194(2); CC s. 114(3)
• An act or proceeding of the Council/Board is not valid unless authorized by bylaw or resolution adopted at a meeting - CC s. 122(4)
• Therefore, the power to contract must be exercised by Board or Council, through adoption of a resolution or bylaw at a duly convened meeting – unless “otherwise provided”
Local Government Contracts
• Some local government contracts must be authorized by bylaw, including:– Housing agreements (LGA s. 483)– Phased development agreements (LGA Part 14,
Division 12)– Municipal development works agreements (LGA s.
570)– Heritage revitalization agreements (LGA s. 610)
Local Government Contracts
• Unless the legislation requires a bylaw, best practice is to approve an agreement by resolution - if authorized by bylaw, amendments to the agreement may also require approval by bylaw
Local Government Contracts
Statutory limitations/preconditions to exercise of local government power to contract:• Expenditures must be authorized under the financial
plan (CC s. 173, LGA s. 401)• For Regional Districts - is the agreement in relation to
an established service?
Local Government Contracts
• Contracts for more than five years (electoral approval is required for capital liabilities):- CC s. 175- Regional District Liabilities Regulation 261/2004- Municipal Liabilities Regulation 254/2004 (Note:
incorporates PSAB guidelines as an interpretive aid)
Local Government Contracts
Other examples of statutory limitations on/preconditions to local government power to contract:• General prohibition on assistance to business• Limitations on delegation of authority• Requirement for publication of notice of intention to
dispose of interests in land• Requirement for publication of notice of intention to
provide certain forms of assistance
Local Government Contracts
• Indoor management rule – does not apply to local governments
• Contracts must be properly authorized in accordance with statutory requirements to be enforced against a local government
• Local governments cannot be held to a contract that is ultra vires the local governments powers
• But, lack of validity of a contract may not shield a local government from claims for compensation based on other legal principles – e.g. unjust enrichment
Local Government Contracts
Delegation of power to contract:• Municipal councils and regional district boards may, by
bylaw, delegate their powers, duties and functions (including power to contract) to:- Council/Board members or committees- Officers and employees- Another body established by the Council/Board
(i.e. commissions established to operate a service)- But, not to a corporation!
Local Government Contracts
• Power to delegate is subject to certain limits, including that powers exercisable only by bylaw may not be delegated
• In exercising the power to delegate, the Council/Board may establish any terms/conditions it considers appropriate– i.e. delegation of authority to enter agreements
may be subject to prescribed financial limits• See CC s. 154, LGA s. 229
Local Government Contracts
Power to contract is typically delegated through:• Officers/employees bylaw• Delegation bylaw• Purchasing/procurement bylaw
What about purchasing policies?
Local Government Contracts
• The power to enter these common forms of local government agreements may be delegated:– Latecomer agreements– Works and services agreement (in connection
with subdivision/development)– Licences of occupation– Leases– Contracts to buy/sell land– Agreements for services– Rights of way and covenants
Local Government Contracts
• Note: Use of standard form agreements/other limitations should be considered when defining the scope of the delegate’s authority
Local Government Contracts
1. Use the active voice, not the passive voice:• Don’t say, “A storm water management plan will
be submitted to the Director of Planning for approval”, say “The Owner must submit a storm water management plan to the Director of Planning for approval”.
2. Say it once.• Expressing the same idea in different ways in
different places can create uncertainty.• Saying something only once forces you to think
carefully about the nature of the obligation, and to be clear about it.
Contract Drafting Tips
3. Define key terms.• If there are more than a handful of definitions,
gather them together in a definitions section for easy reference.
• Use them consistently. Don’t use “Land” and “Property” to refer to the same thing. Pick one and stick with it throughout.
• Don’t assume that capitalizing Certain Words will make them defined, or make their meaning obvious. Create a definition!
• “Means” is restrictive and conclusive, while “Includes” is expansive and open-ended.
Contract Drafting Tips
4. Express one idea at a time.• Look at how legislation is drafted:
Drafting Legal Documents1. (1) For the purposes of this section, “drafter” means a
person preparing a legal document, including a contract or a bylaw.
(2) A drafter must always strive for clarity in a legal document.(3) Without limiting subsection (1), a drafter must do the
following when drafting or preparing a legal document:(a) use one sentence to express one idea;(b) take advantage of format to separate ideas; and(c) express ideas as succinctly as is possible.
Contract Drafting Tips
5. Use plain language.• Avoid antiquated words and legalese whenever
possible. For example, say “in this Agreement” or “in this section” rather than “herein”, which could mean either.
• The “Owner” or the “Regional District” is much easier to remember and understand (not to mention read) than the “Party of the First Part” and the “Party of Second Part”.
Contract Drafting Tips
6. Use negative and positive language effectively.• “The Land shall be used for the purpose of…” is
positive, and doesn’t necessarily preclude other uses in addition to the one specified.
• “The Land shall not be used for any purpose except for the purpose of…” is negative, and does preclude other uses.
• Think carefully about whether you are requiring something to be done, or prohibiting something from being done, and draft accordingly!
Contract Drafting Tips
7. Make appropriate use of mandatory vs. permissive language.• Decide whether you are requiring something or
permitting something.• If you are requiring something, use mandatory
language such as “shall”, “must”, or “will”.• If you are permitting something, use permissive
language such as “may”.• Avoid using “can”, because the issue is legality,
not ability.
Contract Drafting Tips
8. Remember the four “W’s” (and “H” too).• Think about how many of the questions each
provision of your bylaw or contract needs to answer: “Who, what, where, when, and how?”
• Most often, you will want to address each of the four “W’s” at a minimum, and if it matters, you will want to address the “H” as well.
• The oft-neglected, fifth “W” – “Why” – is not typically addressed in the body of legal documents. It can be inferred from the context, or is sometimes explained in the recital clauses.
Contract Drafting Tips
9. Precedents can be your best friend and your worst nightmare.• Read your precedent carefully – one size rarely, if
ever fits all.• Pay attention to details – check all section
references, names of parties, dates, etc., as these can easily be missed when “recycling” an old document.
• Context matters – a situation may appear superficially the same as a previous one, but look at every situation and every document on its own terms.
Contract Drafting Tips
10. Revise, revise, revise!• Use the first draft to get your ideas onto paper,
without worrying about getting the language “just right” (expecting perfection from the start is a classic recipe for procrastination).
• Always plan for at least one revision.• Have someone else review and comment, if
possible.• Whenever possible, leave some time between
drafting and revision – you’ll be amazed at the things you’ll catch with fresh eyes.
Contract Drafting Tips
Contract procurement, broadly speaking, could include any process by which:• offers are solicited/obtained from suppliers for the
supply of goods, services, construction services, etc.• owner selects the most favourable offer
“Competitive” vs. “sole source” procurement
Contract Procurement
• Request for Quotations– Owner asks suppliers for their best price for a
standard item or service• Request for Expressions of Interest
– Owner intends to procure through RFP or Tender and wants a short list of pre-qualified participants
Contract Procurement
Common Forms of Competitive Procurement
• Request for Proposals– Owner requests proposals, with the intention of
negotiating with the preferred proponent• Invitation to Tender
– Owner requests sealed bids for performance of a contract – price the most important consideration
Contract Procurement
Common Forms of Competitive Procurement
• Better assurance of value for money• May eliminate or reduce need for negotiation• Openness/transparency• Promotes public confidence • Builds confidence among private sector participants
Competitive Procurement
Why Procure Through Competition?
• May be a requirement under procurement policies/bylaws
• May be required under Trade Agreements:– Agreement on Internal Trade– Northwest Partnership Trade Agreement– Canada-European Union Comprehensive
Economic and Trade Agreement (CETA)
Competitive Procurement
Why Procure Through Competition?
• Owners have been sued, successfully, for:– Awarding a contract to a non-compliant bidder– Awarding a contract based on undisclosed
evaluation criteria such as a local preference policy• Courts may award damages amounting to:
– The plaintiff’s costs in putting together its bid– If the court is satisfied that but for the breach the
owner would have awarded the contract to the plaintiff, damages for loss of profit
Competitive Procurement
Risks to the Owner
• No statutory obligation for local governments to procure goods and services through a competitive process
• AIT, NWPTA, and CETA include requirements for open and competitive procurement practices on the part of local governments
• Are these agreements legally binding on local governments?
Competitive Procurement
Inter-Governmental Trade Agreements
• Under NWPTA the Province of B.C. has agreed that local governments must provide “open and non-discriminatory access to procurements” for:– goods or services of $75,000 or more– construction of $200,000 or more
• B.C. has also agreed to ensure that government entities post notices for all covered procurement on an electronic tendering system
Competitive Procurement
Inter-Governmental Trade Agreements
NWPTA provides certain exemptions, including:• Procurement from a public body• From philanthropic organizations, prison labour,
persons with disabilities• Health and social services• Sporting/convention facilities that are subject to
commercial agreements inconsistent with NWPTA• Where it can be demonstrated that only one supplier
can meet requirements• Unforeseeable situations of urgency• Acquisitions of a confidential or privileged nature• Legal or notary services
Competitive Procurement
Inter-Governmental Trade Agreements
• NWPTA now includes a “bid protest mechanism” • Suppliers may protest local government procurement
decisions, if the supplier believes the decision was not in accordance with NWPTA
• May lead to arbitration• Arbitrator has authority to award:
– Up to $50,000 in costs of the arbitration– Up to $50,000 as a “recoupment award” for costs
incurred in putting together the supplier’s tender• Compliance may be a condition of grant funding from
senior levels of government
Competitive Procurement
Inter-Governmental Trade Agreements
• In most cases, owners use a tendering process in situations where cost is the most significant factor:– Owner has a predetermined set of requirements– Is looking for the best price for delivery of those
requirements– Limited or no scope for negotiation
Competitive Procurement
Invitations to Tender
Courts in Canada have articulated the following legal principles that govern contract tendering:• By issuing an invitation to tender, and by accepting a
bid that complies with the terms and conditions of the invitation to tender, the owner enters into a “Contract A” with each bidder
• Contract A is a legally binding contract that governs the tendering and contract award process, and is distinct from the contract for goods or services the owner intends to enter into with the successful bidder – that contract is “Contract B”
Competitive Procurement
Invitations to Tender
• Contract A may provide that bids are irrevocable for a period of time, and may oblige the bidder whose bid is accepted to enter into Contract B with the owner
• Contract A may impose a qualified obligation on the owner to accept the lowest bid
• Whether Contract A comes into effect depends on the intention of the parties, determined objectively -primarily by the terms of the Invitation to Tender
Competitive Procurement
Invitations to Tender
• The terms and conditions of Contract A are for the most part as expressly set out in the Invitation to Tender
• But, Contract A may include certain implied terms:– that the owner will only accept a “compliant” bid;– that the owner will treat all bidders “fairly”
• The “privilege clause”, that the lowest or any tender will not necessarily be accepted:– does not allow the owner to accept a non-
compliant bid– allows the owner to take a “nuanced view of cost”
Competitive Procurement
Invitations to Tender
• Scope of the duty of “fairness” – analyzed in light of express terms of Contract A
• “Fairness” means applying the rules of the tender equally to all participants
• “Fairness” means that the owner must not use undisclosed criteria when evaluating a bid
• The owner is not obliged to look behind the face of or investigate each bid, and is entitled to accept and evaluate each bid based on the form and content of the bid submitted by the contractor
Competitive Procurement
Invitations to Tender
A typical Invitation to Tender will include:• A process for submission of bids
– Deadline for submission– Indicates where bids are to be delivered– Will prescribe the form and content of the bid– That bids must be sealed– Procedures for amending a bid before the close of
tenders• Specifications/detailed description of the work the
owner needs performed
Competitive Procurement
Invitations to Tender – Typical Terms
• A statement that bids are irrevocable for a specified period of time
• A statement reserving the owner’s right to waive “informalities” in a bid
• A requirement for bid security• Requirements for other information the owner thinks
relevant – contractor’s experience, references, list of sub-contractors, evidence that the contractor can provide a performance bond, lists of equipment and key personnel
• In some cases, the evaluation criteria the owner will use (if price is not the only consideration)
Competitive Procurement
Invitations to Tender – Typical Terms
• A “privilege clause” – that the lowest or any bid will not necessarily be accepted, and that the owner reserves the right to reject any and all tenders
• A limitation of liability clause protecting the owner from claims for breach of Contract A
• The terms and conditions of Contract B• For local governments, provisions re: confidentiality
and the Freedom of Information and Protection of Privacy Act
Competitive Procurement
Invitations to Tender – Typical Terms
• Owner can’t rely on the standard privilege clause to accept a non-compliant bid
• “Nuanced view of cost” – the privilege clause allows the owner to look behind the dollar value of the bid and to ask, what is the “true cost” of each bid? Which bid represents best overall value for money?
• Owner may reject the low bid if there are valid, objective reasons for doing so
• Reasons may include poor past performance by the contractor, whether based on the owner’s experience or the experience of other owners
Competitive Procurement
Invitations to Tender – The Privilege Clause and Bid Selection
• Does the contractor have a history of making spurious claims for extras to try to make up for its low-ball bid?
• Does the contractor require extra supervision?• Is the low bid too low or unbalanced? Is there a risk
the contractor will not be able to complete the work at that price, or will cut corners?
• Other similar factors that indicate that the “true” cost of the bid is higher than the price offered in the Form of Tender
Competitive Procurement
Invitations to Tender – The Privilege Clause and Bid Selection
• Courts have held the privilege clause supports a “reasonable exercise of business judgment” by the owner
• Owner is entitled to act in its own best financial interests so long as its decision is not “unfair”
Competitive Procurement
Invitations to Tender – The Privilege Clause and Bid Selection
• Default test for compliance is “material” compliance• Where the test is material compliance –
discrepancies, errors or omissions that do not affect the integrity or fairness of the bidding process, or the price or performance of Contract B, may be waived by the owner
• Owners can “up the ante” by requiring “strict” compliance
• If strict compliance is required - defects in the tender cannot be waived
• Strict compliance requirements should be avoided without good reason
Competitive Procurement
Invitations to Tender – Bid Compliance
• Watch for use of “shall” or “must” in the invitation to tender
• Materiality is determined objectively – according to the courts, this is not a proper matter for the owner’s discretion
• Must consider objectives underlying the tendering process, and the reasonable expectations of the parties, especially other bidders
Competitive Procurement
Invitations to Tender – Bid Compliance
• Test for materiality:– Does the defect in the tender undermine fairness
of the competitive process, impact the cost of the bid or performance of Contract B, or create a risk of action against the owner by other bidders?
• Note: owners are not required to investigate a bid which on its face complies with the requirements of the tender
Competitive Procurement
Invitations to Tender – Bid Compliance
• Bidder fails to fill in blanks in tender form but information required is found elsewhere in the bid
• Bidder phones owner just before closing to advise of arithmetical error – owner makes correction – tender says changes to bids to be made in writing
• Tender allows bidders to adjust tendered price up or down by fax, but instead faxes in new unit prices
• Bidder provides a bid bond where tender requires a letter of credit
• Bidder fails to provide a preliminary construction schedule, but promises to complete the work within time required
Competitive Procurement
Material Compliance Scenarios
• Bid states the price in numbers and in writing – thereis a discrepancy – bidder advises owner at the tender opening that the lower price is the correct amount
• Bidder fails to include vehicle registration numbers in schedule of equipment
• Bidder fails to complete list of subcontractors, or writes in “TBD”
• Bidder submits incomplete tender in a sealed envelope, then faxes the missing information an hour before the closing
• Corporate bidder does not apply corporate seal to its bid, although the tender requires this
Competitive Procurement
Material Compliance Scenarios
• Tendering law is founded in law of contract• Courts have confirmed that the terms and conditions
of the tender are primarily determined through the express terms of the invitation to tender
• So the answer would appear to be, yes, as long as the owner does so in express terms!
Competitive Procurement
Can the Owner Reserve the Right to Accept a Non-Compliant Bid?
• Kinetic Construction– Owner expressly reserved right to retain and
consider non-compliant bids. Court characterized the non-compliant bid as a counter-offer, found that given the clause, owner could consider the bid, but had to act “fairly” when comparing that counter-offer to the other compliant bids.
• Graham Industrial Services Ltd. – owner cannot reserve to itself the sole discretion to
decide whether a defect is “material” or not
Competitive Procurement
Can the Owner Reserve the Right to Accept a Non-Compliant Bid?
• But, should the owner reserve this discretion to itself?• Potential bidders might perceive clauses that are too
owner-friendly as creating an un-level playing field –might affect the price of bids, deter contractors from bidding
• Owner discretion clauses may protect the owner in “close to the line” cases where determining compliance is difficult
• Owners should avoid practices that undermine the confidence of suppliers and the public
Competitive Procurement
Can the Owner Reserve the Right to Accept a Non-Compliant Bid?
• Not unless the invitation to tender expressly allows for this, and then only as expressly permitted
• Remember that the tendering process is designed to replace negotiation with competition
• Negotiation with the contractor after Contract B is signed is another matter
Competitive Procurement
Can the Owner Negotiate With the Low Bidder?
• The privilege clause allows the owner to cancel the tender if the decision is made:– in good faith– for legitimate purposes– in a manner that ensures equal treatment to all
bidders• Examples:
– All bids over budget– Errors have been made that have undermined the
fairness of the tendering process
Competitive Procurement
Can the Owner Cancel the Tender?
• Owners sometimes try to limit their liability by:– Including in the invitation to tender a clause such
as: “each bidder waives any claim for damages resulting from their participation in the tender”
– Including a clause under which each bidder agrees to limit any claim to the cost of putting together their bid
Competitive Procurement
Exclusion/Limitation of Liability Clauses
• Courts have taken a rather narrow approach to the interpretation of these clauses, but have also enforced them in some circumstances
• Tercon Contractors Ltd. v. British Columbia (Ministry of Transportation and Highways), 2010 SCC 4:– Clause limiting liability for anything arising from
“participation in this tender” did not protect against claims for award to a non-compliant bidder
Competitive Procurement
Exclusion/Limitation of Liability Clauses
• When determining if an exclusion clause applies:- The court interprets the clause to determine
whether it applies to the circumstances established in evidence.
- Depends on the court’s assessment of the intentions of the parties, as expressed in the contract.
- If the clause applies, the court must then determine whether the clause was unconscionable at the time that it was made.
Competitive Procurement
Exclusion/Limitation of Liability Clauses
• If the clause is applicable and valid, the court must consider whether it should nonetheless refuse to enforce it because of an overriding public policy (to be proven by the party seeking to avoid enforcement of the clause) that outweighs the very strong public interest in the enforcement of contracts.
Competitive Procurement
Exclusion/Limitation of Liability Clauses
• Mega Reporting Inc. v. Yukon (Government of), 2018YKCA 10– Broad exclusion of liability clause that waived
liability arising from “any actual or alleged unfairness” at any stage of the bid process
– Court found no public policy outweighing the public interest in the enforcement of contracts
– Exclusion of liability clause enforceable
Competitive Procurement
Exclusion/Limitation of Liability Clauses
• A Request for Proposals is usually structured to givethe owner flexibility to negotiate with the proponent that puts forward the proposal the owner considers most desirable
• An RFP may also be appropriate where the owner has a general idea of its requirements, and wants to provide flexibility to the proponents to suggest solutions
Competitive Procurement
RFPs
• Owners may expressly exclude the formation of Contract A – for example, by stating that the owner has no contractual obligation to any proponent unless and until a negotiated agreement is approved by the owner and is executed by the parties
• But, owners wishing to avoid Contract A can’t “have it both ways” by saddling proponents with contractual obligations (security requirements, no withdrawal of proposals after closing, etc.)
Competitive Procurement
RFPs
Courts will look at:• Are proposals irrevocable?• Formality of the procurement process• Formal deadlines for submission? • Financial security requirements?• Limited or no room for negotiation?• Are terms of Contract B specified?• Does the RFP expressly state that no Contract A is
intended?
Competitive Procurement
RFPs – Does Contract A Arise?
A typical RFP could include:• A statement of the owner’s requirements
– usually written in broad terms – proponents may be invited to suggest a broad range of solutions
• A statement of required proponent qualifications – if a pre-qualification process has not preceded the
RFP • Required or desired proposal content • Process for submission• FIPPA/confidentiality
Competitive Procurement
RFPs – Typical Terms
• Process for evaluation– duty of fairness requires that evaluation criteria be
disclosed– some RFPs set out a detailed evaluation matrix
with points to be assigned in each category– some list evaluation criteria in more general terms
Competitive Procurement
RFPs – Typical Terms
• Process for negotiation – Owner would typically express the intention to
negotiate with the “preferred proponent”– May reserve the right to negotiate changes, terms
or conditions without offering the same to other proponents
– May reserve the right to negotiate with other proponents if negotiations with the preferred proponent fail
Competitive Procurement
RFPs – Typical Terms
• Whether the owner intends to enter Contract A• If no Contract A is intended, avoid:
– stating that proposals are irrevocable– requiring security with the proposal– specifying required terms and conditions of
Contract B
Competitive Procurement
RFPs – Typical Terms
• Evaluation process begins with the preparation of the RFP
- carefully consider evaluation criteria/evaluation process
- clearly disclose criteria to participants• Owners must avoid acting arbitrarily in evaluation
of proposals – must give reasonable consideration to the content of each proposal
• Ensure all members of the evaluation team understand the rules
Competitive Procurement
RFPs - Evaluating Proposals
• Quite apart from Contract A considerations, local government procurement decisions are subject to judicial review on a standard of “reasonableness”: Shell Canada v. Vancouver (City)
• Murray Purcha & Son Ltd. v. Barriere (District):- Local governments owe a duty of procedural
fairness to participants in an RFP or tendering situation
- Duty of fairness arises outside of Contract A framework
- Requires local governments to follow the procedure laid out in the RFP or tender
Competitive Procurement
Procedural Fairness Obligations
• When advising the Board or Council, explain the basis for the recommendation in clear terms
• Avoid public disclosure of information that may be subject to FIPPA- Was any information submitted on a confidential basis (e.g.
unit prices)? Consider whether FIPPA section 21 may apply.- Do tenders/proposals contain personal information? Consider
whether FIPPA section 22 may apply.• Once a contract is executed, all information set out in the
agreement will generally be subject to public disclosure – FOIPPA section 21 does not apply to “negotiated” information
Competitive Procurement
Contract Award/Post Award Matters
• Whether you are using a standard form tender document such as MMCD, or whether you had a consultant prepare the invitation to tender, make sure you read it and understand its terms before issuing the tender. Same holds true for RFPs.
• Consider whether in the circumstances you wantContract A to arise, and make sure the wording of the document reflects your intention.
• If an RFP, avoid imposing legally binding requirements on the proponent (security, irrevocability of proposal, etc.) if you do not want Contract A to arise
Competitive Procurement
Do’s and Don’ts
• Avoid unnecessary use of terms such as “must” and “shall” to avoid the “strict compliance” test for tender compliance.
• Use “must” or “shall” for requirements that are essential to the fairness and integrity of the process.
• Avoid unnecessary, antiquated or impractical requirements for execution and submission of tenders.
• Try to achieve a reasonable balance between the interests of the owner and the bidders
Competitive Procurement
Do’s and Don’ts
• Consider whether the scope of the owner’s discretion needs to be expanded. Does the owner want the discretion to accept a non-compliant bid? Keep in mind that the more “owner-friendly” the process is, the more reluctant suppliers may be to participate.
• If evaluation factors other than cost are to be considered, disclose them.
• Consider including an exclusion/limitation of liability clause – have your lawyer review the wording!
Competitive Procurement
Do’s and Don’ts
• Make sure that all local government staff/elected officials involved in the process understand the legal requirements of the process.
• Follow the process you have set out in the invitation to tender or RFP – even if it means you have to reject a very competitive bid or proposal.
• Remember to look beyond the award of the contract -preserving your reputation and the integrity of your procurement process is extremely important.
Competitive Procurement
Do’s and Don’ts