Contract and Direct Openings for a top-tier Global

published by: C.E. Publications, Inc., P.O. Box 3006, Bothell, WA 98041-3006Phone: 425/806-5200 • Fax: 425/806-5585 • Email: [email protected]

OCTOBER 29, 2014 • VOLUME 46, NO. 35 • $4.00

Contract Employment

®

www.cjhunter.coma product of CE Publications, Inc.

Send resume for the following positions to [email protected]• MECHANICAL DESIGN ENGINEER - BS in Mechanical Engineering, 3+ years experience in design and/or

product engineering in aerospace, ITAR program experience, experience with Pro/E desired, design of manufacturing desired

• EXECUTION SCHEDULER - BS in Business, Engineering or related field, 5+ years experience in execution planning,experience with MS Project, MRP systems experience, OSM MRP desired, EVMS, work package management desired

• PRODUCT ASSURANCE ENGINEER - BS in a technical discipline with 5+ years experience or MS in a technicaldiscipline with 3+ years quality engineering. Must be able to be certified to NASA-STD-8739.1, 2, 3 and 4 or have current certi-fication, willing to work on call, off shifts and weekends/holidays, travel required, considerable knowledge of quality controlmethods and procedures, military specs related to electronics industry, reliability requirements of electronics, mechanicaland electromechanical equipment and surveillance methods

• SYSTEMS ENGINEER - MS in Engineering, Physics or related, 6+ years relevant technical experience with radiometricand spectral response analysis of optical systems required

Seattle Aerospace RecruitmentDelivery [email protected]

Phoenix Aerospace RecruitmentDelivery [email protected]

Ft. [email protected]

National Recruiting - Orange, [email protected]

San [email protected]

[email protected]

[email protected]

[email protected]

Contract and Direct Openings for a top-tierGlobal, Aerospace, Defense, Information and Service Company

in Ft Wayne, Indiana !!!Send resume for the following positions to [email protected]

• STRUCTURAL ANALYSIS ENGINEER - BS in Mechanical Engineering, 3+ years experience in mechanical designand analysis. Experience with structural analysis packages required. SigFit, MatLab and Pro/E desired

• THERMAL ANALYSIS ENGINEER - BS in Mechanical Engineering, 3+ years experience in thermal design, testing,analysis. Experience with thermal analysis packages required. Nastran or Abaqus

• MANUFACTURING ENGINEER - BS in Engineering or Science and Research with 7+ years work experience,experience with bids and proposals, demonstrated knowledge of integrated product development

• STRUCTURAL ANALYSIS ENGINEER - BS in Engineering, 3+ years in mechanical design and design, experiencewith structural analysis packages required

Happy

2 – October 29, 2014 C.E. Weekly

WESTLAX/LONG BEACH 866.458.4322DER, AR or ODA Stress Engineers (2461) - for DaDT orSRM programs - Rate $90/hourStress Engineers - Prior 7-Series fleet support

CHULA VISTA, CA 800.234.8644Structural Engineers (1911 & 1913) - Metallic and com-posite airframe structures. BS/MS Engrg, 10 years exp

CHULA VISTA, CA 866.458.4322Tool Designers - CATIA V5 with aircraft composites,assembly and GSE tooling - To $69/hourDaDT Analysis Engineer - Must have composites,Patran, FEMAP, NX CAE, and MRB. US citizens ONLY. Rate$52/hour

REDONDO BEACH, CA 866.458.4322Stress Engineers - Patran and FEMAP needed. Heavy mili-tary aircraft background needed. LT - Rates TBD - USCitizens ONLY

NORTHWESTWASHINGTON 800.678.8644Industrial Engineers (3273) - Levels 2 & 3Methods Process Analysts (3271) - Levels 2 & 3

MIDWESTMADISON, WI 800.333.1389Electrical Engineers (3115) - PE’s State of WI for construc-tion consulting. Need 4 - Direct hire

NORTHEASTNEWARK, DE 844.786.7580Mechanical Design Engineer (2736) - Design, CAD,PLM NX or Pro/E, 10 years + AA degree, medical deviceindustry preferred

PHILADELPHIA, PA 844.786.7580MP&P Lab Technician (2710) - Composites fab, 9 years+ AA degree, US citizen a must

SOUTHEASTMELBOURNE, FL 866.517.9514Engineer-Structures (2328) - Aircraft structures repairsand engineering dispositions for metallics/composites;technical/engineering support to customers and repairstations. BA degree in Aeronautical/MechanicalEngineering, 6-10 years exp

Sr Engineer-Structures/Loads - Exp in design loads cri-teria and governing documents; ability to determineflight loads, ground loads, dynamic loads. 14 years exp

JACKSONVILLE, FL 866.517.9514Assembler Technician (7487) - Removal/installation ofavionics electrical components, fab of wire harnesses

Trade Compliance Manager (2803) Import/exportcompliance, customs and export controls regs, ITAR exp

Contracts Manager (2807) Contractual assessment andrisk mitigation, SME for defense contracts, FAR/DFARand contract requirements. 10 years contracts exp reqd

BRANCHES:

Anchorage, AK

907.562.1633

Atlanta, GA

877.272.0088

Austin, TX

800.917.2841

Bellevue, WA

855.428.8397

Charleston, SC

866.224.2745

Costa Mesa, CA

800.234.8644

Green Bay, WI

800.333.1389

Hartford, CT

866.636.4723

Houston, TX

888.737.0050

Irving, TX

800.270.4737

Philadelphia, PA

844.786.7580

Phoenix800.456.8644

800.657.0997

San Antonio, TX

866.570.1503

Santa Clara, CA

408.916.4844

Savannah, GA

855.373.6858

Seattle, WA

800.678.8644

St. Louis, MO

800.472.3737

Tampa, FL

866.517.9514

Westlake Village, CA

866.458.4322

Wichita, KS

800.333.8644

We pay thousands in referral bonuses every month!

HOT NEW ENGINEERING OPENINGS IN WICHITA, KANSASIMMEDIATE OPENINGS & STARTS - LONG TERM - CALL 800-333-8644

50 DESIGN ENGINEERS: CATIA V6 • 3 years aircraft design • BS Engrg or 10+ yrs exp

30 STRUCTURAL ENGINEERS: Nastran • CATIA • 5 years exp • BSME/BSAE degree

20 AVIONICS/ELECTRICAL DESIGN ENGINEERS: CFR 14 Part 25 • IAI HarnesSYS/Mentor Graphics • MS Office Suite • BSEE/BSCmpE/EE tech degree

15 SYSTEMS SAFETY ENGINEERS: Safety assessment per AC 23.1309-1E SAE ARP4761/4754A • System assessment using modeling tools • Domestic/foreign aircraft certification process • DO-178/DO-254

ENGINEERING PROGRAM MANAGER: Direct program in coordination with engrg leadership• Establish/clarify needs • Achieve program objectives within budget • Workforce mgmt

C.E. Weekly October 29, 2014 – A-1

MIDWEST - 2 NEW SPECIAL PROGRAMSLONG TERM - PROGRAM HAS STARTED

MISSOURI 800.472.373718 STRESS ENGINEERS (8957) - Nastran, Patran, composites, primary structures20 STRUCTURAL DESIGN ENGINEERS (8962) - With or without composites, UG NX preferred,

TeamCenter, Primary structures, Will consider CATIA V5

14 STRESS ENGINEERS (1777) - Composites and DADT/FEMAPMANY STRUCTURES ENGINEERS (7727) - Composites, CPD Work Bench or Fibersim a plus, CATIA V52 ESCAPE SYSTEM ENGINEERS (1779) - CATIA V510 PROPULSION/FUEL & ECS ENGINEERS (1772) - CATIA V515 TOOL DESIGNERS (9723) - Composites, CATIA V5, assembly or machine tooling10 LANDING GEAR & HYDRAULICS DESIGNERS (1782) - CATIA V5

A-2 – October 29, 2014 C.E. Weekly

JOBLINES – Continued on Page A-3

* See page column refers to the page number of a display ad with possible further information regarding the job openings and/or related requirements. Where Index is used, there is no display adfor that listing. The address and phone number of the firm with that job can, therefore, be found in the Index of Contract Firms in the back of each C.E. Weekly. The following feature of C.E. Weeklycategorizes job openings by discipline. Please keep in mind that JobLines represent just a portion of the total number of openings published in this issue. There are many jobs appearing in displayads, which do not appear in JobLines.

$$$$ JobLines $$$$Assignment Contract Firm/ Per Over- Expected Expected * See

Job Classification, Description Location Office to Contact Rate Diem time? Duration Start Date Page

FOREIGN ASSIGNMENTS:Electrical Wiring Design—integration Montreal, Canada TDM/Toronto 68/hr — — 12 mos+ ASAP A-1

Engineer—FBW controls laws Montreal, Canada TDM/Toronto 72/hr — — 9 mos+ ASAP A-1

Wiring & Integration Designer Toronto, Canada TDM/Toronto 65/hr — — 12 mos+ ASAP A-1

DOMESTIC ASSIGNMENTS:Aero Engineer—aircraft performance/stability & control Irvine, CA STS Engrg/Jensen Beach DOE poss poss contr-dir ASAP Index

Aerospace Industrial Engineer—percent load/CI Chula Vista, CA Ad-Tek/Santa Ana 65/hr yes yes 6 mos+ ASAP Index

Aircraft Mechanical Engineer—SolidWorks Irvine, CA STS Engrg/Jensen Beach DOE poss poss contr-dir ASAP Index

Airline Fleet Support Design Engineer—MRO Seattle, WA Windspeed/Everett 65/hr split poss 6-12 mos ASAP 15

Automotive Electrical Design Engineer—CATIA Marysville, OH Adtl Tech/Framingham 35-40+hr poss poss 12-24 mos ASAP Index

Avionics Engineer Savannah, GA Precision Pers/Clearwater 58-63/hr yes yes 1 year+ ASAP Index

Buyer—purchasing aircraft parts/components Goodyear, AZ STS Engrg/Jensen Beach DOE poss poss — ASAP Index

CADWorx Pipe Designer—petrochemical/oil/gas Irvine, CA Adtl Tech/Framingham 40-55/hr poss yes 6 mos-dir ASAP Index

CATIA V5 Design—body structures Fremont, CA Idex Solutions/Portland 45-60/hr poss prob 6-12 mos ASAP Index

CATIA V5 Design—cab closures/automotive industry Fremont, CA Idex Solutions/Portland 45-60/hr poss prob 6-12 mos ASAP Index

CATIA V5 Design—cab exteriors/automotive industry Fremont, CA Idex Solutions/Portland 45-60/hr poss prob 6-12 mos ASAP Index

CATIA V5 Design—cabin interiors Fremont, CA Idex Solutions/Portland 45-60/hr poss prob 6-12 mos ASAP Index

CATIA V5 Design—cabin overhead systems Fremont, CA Idex Solutions/Portland 45-60/hr poss prob 6-12 mos ASAP Index

CATIA V5 Design—seating/seat structures Fremont, CA Idex Solutions/Portland 45-60/hr poss prob 6-12 mos ASAP Index

CNC Machinists Portland, OR Belcan/Cincinnati 35+/hr — poss 3 mos ASAP 8

CNC Programmer—MasterCam X6 programming Torrance, CA Moseley/Huntsville — no poss 6 mos ASAP Index

Cab Mechanical Engineer—CATIA V5/advanced surfacing Portland, OR Idex Solutions/Portland 38-44/hr poss poss 12-18 mos ASAP Index

Cisco Network Administrator—enterprise network design Dallas, TX Multax/Manhattan Beach — yes poss 6 mos+ ASAP Index

Civil/Structural Designer—CADWorx W Jordan, UT Adtl Tech/Framingham 50-60/hr poss poss 6 mos+ ASAP Index

Configuration Management Contractor Rome, NY Adecco/San Diego 27/hr no poss 6 mos+ ASAP Index

Cost Report Technician—CMS reports Birmingham, AL Moseley/Huntsville — no poss 6 mos ASAP Index

Curriculum Courseware Developer Shelton, CT Kforce/Shelton 35/hr no poss 2 yrs Nov 3 Index

Design Checker—mechanical engrg/final phase completion Savannah, GA Agente/Colleyville — split poss LT ASAP Index

Design Engineer—AutoCAD & SmarTeam required Savannah, GA Hi-Tec Prof/Marietta 55/hr yes yes LT ASAP Index

Design Engineer—SolidWorks/AutoCAD Midwest Agente/Colleyville — split poss 3-6 mos ASAP Index

Design Engineer-Tech Spec I Savannah, GA Inconen/Culver City 55-57/hr yes poss LT ASAP 15

Designer/Drafter—piping Ponca City, OK Foster/Wichita 15-26/hr poss poss 11 mos+ ASAP Index

Developer—Oracle SQL or MS SQL/VB.Net Texas Agente/Colleyville — split poss LT ASAP Index

EMI Engineer—EMI-EMC test programs/airborne IFE sys Melbourne, FL STS Engrg/Jensen Beach DOE poss poss — ASAP Index

Electrical Designer—AutoCAD drafting Birmingham, AL Tech Plus/Valley Head — split — 3 mos+ Now Index

Electrical Designer—INTools wiring support New Orleans, LA Tech Plus/Valley Head — split — 6 mos — Index

Electrical Engineer Savannah, GA Precision Pers/Clearwater 65-67/hr yes yes 1 year+ ASAP Index

Electrical Engineer—AAP final phase/aircraft interior Savannah, GA Agente/Colleyville 65-67/hr split poss LT ASAP Index

Electrical Engineer—embedded software/aerospace/DO-254 Ft Worth, TX Ingenium/Rockford — — — direct ASAP Index

Electrical Engineer—embedded software/aerospace/DO-254 Irvine, CA Ingenium/Rockford — — — direct ASAP Index

Electrical Engineers—mining/refinery/oil and gas New Orleans, LA Tech Plus/Valley Head — split — LT — Index

Electrical Power Engineer—large terminal exp Ashland, KY Tech Plus/Valley Head — split — — ASAP Index

THIS WEEK’S DISPLAY ADVERTISERS:Butler . . . . . . . . . . . . . . . . . .6Chipton-Ross . . . . . . . . . . . .7Comforce . . . . . . . . . . . . . . .8CTS International . . . . . . . .4

Additional Contract Serv . .12Advanced Technology . . . .12Apollo Professional . . . . . . 9Belcan . . . . . . . . . . . . . . .8-9

Global Contract Prof . . . . . .5Inconen . . . . . . . . . . . . . . .15Johnson . . . . . . . . . . . . . . .12National Engineering . . . . . . .3

NORAMTEC . . . . . . . . . .10-11PDS . . . . . . . . . . . . . . .2, A-1Peak . . . . . . . . . . . . . . . . . .13RCM Technologies . . . . .Back

TDM . . . . . . . . . . . . . . . . . .A-1Triad Worktek . . . . . . . . . .13Volt . . . . . . . . . . . . . . . .FrontYoh Engineering . . . . . . . . .9

C.E. Weekly October 29, 2014 – 3

NATIONAL ENGINEERING SERVICE CORPORATION

www.natleng.comWe Offer:

• Direct Deposit

• 401(k)

• Per Diem

• Referral Fees

Texas & Gulf Coast Area4715 Strack Road, Suite 200, Houston, TX 77069 • Email: [email protected] or [email protected]

Call: (281) 537-9103 • Toll Free: 800/765-7499 • Fax: (281) 537-9169** Must be US Citizen or Perm Resident / Green Card Holder **

E/I DESIGNERS-PDS, SmartPlant, AutoCAD exp, 7-15+ yrs exp, refinery/petrochem industry exp a must - Houston/Corpus Christi, TX / Baton Rouge, LA /St Paul, MNPROJECT MANAGERS-7-15 yrs exp in refinery, chemical, pipeline industries.BS degree - Houston/Corpus Christi/Port Arthur, TX and St Paul, MNVESSEL DESIGNERS-10+ yrs pressure vessel design exp, extensive fabricationexp required, AutoCAD a must, Inventor a plus - Houston, TXHYDRAULIC ENGINEER-BS degree required, subsea equipment/hydraulicdesign exp a must, drilling/production control systems design exp, 5-10 yrs exp -Houston, TXSUBSEA ENGINEERS-6-15+ yrs exp, BS degree, exp needed in the followingsubsea areas: controls, pipeline, materials, connectors - Houston, TX

National Recruiting CenterDIAL 1-800-JOB-FIND

72 Mirona Road, Portsmouth, NH 03801 • Email: [email protected]: 603/431-9740 • Call Toll Free: 800/562-3463 • Fax: 603/427-0573 • Fax Toll Free: 800/637-2562

MANUFACTURING *** POWER *** OIL & GASFIELD & OFFICE LOCATIONS: MA / CA / CO / AZ / WI / KS / NC / VA / PA / FL / NH / IL

CIVIL ENGINEER-Dev a plan to mitigate the long term effects of ground-water degradation on underground struct and eqpt to sustain LT plant operationsCOMMISSIONING ENGINEER-Responsible for all aspects of the startupand operation of assigned systems on GA, coal and CoGen power plantsELECTRICAL ENGINEER-Substation engrg including detailed physical desfor high voltage substation projects through 345kv. Depending upon complexityof the project, may prepare, provide guidance or assist in preparing and devel-oping the engineering deliverables such as transformers, distr sys, doing theassoc load calcs, and working with SKM: ETAP, ArcFlash and relay protectionELECTRICAL DESIGNER-Must have exp in power plants and oil/gas facil-ities. Must be capable of locating equipment in a 3D environment as well asdesign using Microstation and PDSFACILITY DESIGNER-Heavy industrial bldgs, plant layout, power generatingplant using Microstation, PDS, 2D and 3D working with raceways and cable trayHEALTH & SAFETY SPECIALIST-Implement and/or administer safety,health, environmental protection, and substance abuse prevention programsaffecting employee and public safety, occupational health, fire protection andprevention and equipment and property protection. DOE/NRC regulationsHVAC ENGINEER & DESIGNER-Piping, layout, design, mechanical ductwork, design and installation, plumbing and fire protection with various CADsystems. Support calculations, analysis, studies, equipment specs/data sheetsINSTRUMENTATION & CONTROL ENGINEER-Review and prepareI&C engineering and design calculations and provide design recommendations thatmust adhere to applicable codes, standards and procedures. Working withMCC, LabView and PCB layout for programmable control circuits and drivesINSTRUCTORS/TRAINERS-Develop lesson, Power Point slides, and teachtraining classes for the operations. Must have had SRO certification on eitherBWR/PWR plantsMECHANICAL ENGINEER-Components for vessels, tanks and pumpsMECHANICAL ENGINEER-Nuclear licensing exp for all plant systems

PRODUCT & MACHINE DESIGNER-Tooling design, injection moldingeqpt, GD&T, detail drawings in 2D and 3D using AutoCAD, Pro/E, UG NXPIPING DESIGNERS-Review and update P&IDs, design equipment layoutson industrial, chemicals, refinery and speciality chemicals (cryogenics) includingutility piping using Microstation/PDSPROJECT MANAGERS-PMP Cert and PMI trained (Nationwide)PLANNERS/SCHEDULER-Primavera products (P3, P4 and P6) being theprimary tool used. Command and control of schedule development, mainte-nance, structure and processPROCEDURE WRITERS-Sys and procedure knowledge, read mods, com-plete tech review, assess impact and necessity for procedural changes or updatesPIPE SUPPORT ENGR & DESR-Pipe support modeling using PDS sup-port modeler, Pelican Forge. Microsoft Word, 3D CAD skills, Integraph PDS3D, Microsoft Excel, Access, Pelican Forge support modeler and MicrostationPIPE STRESS ENGINEER-Strength of materials, specialty support design,fluid dynamics, corrosion principles, piping vibration and competency withCaesar II stress analysis softwareQUALITY ASSURANCE ENGINEER-QA/QC procurement activitiesduring the execution of a major intl nuclear power plant project. Implementprograms to oversee and monitor progress and success during execution of projSECURITY SYSTEM-Design, develop and coordinate implementation ofboth LT and ST including supporting technology and monitor these policies, pro-cedures and technologies, once implemented, to ensure complianceSTARTUP ENGINEER-Facilitate process review of test dataSTRUCTURAL ENGINEER-Prepare struct engrg calcs for steel structuresand/or foundations. Basic analysis, design calcs, eqpt research, sketches, etc.required to prepare documents, specs, drawings, or to meet other proj reqtsVESSEL ENGINEER-Dev eqpt designs using validated and verified specialapplication software (Compress or equiv) and perform dynamic eqpt analysesand consider the effects of tank sloshing. Familiar with ASME boiler and pres-sure vessel code

PROCESS / PROJECT ENGINEERS-BS degree, 7-15 yrs exp, multiple disciplines needed including LNG, chemical/petrochem, refining - Houston/CorpusChristi, TX and St Paul, MNPRODUCT / DESIGN ENGINEER-BS degree a must, 4+ yrs exp in anengineering environment, manufacturing, fabrication, hydraulic couplings exp -Stafford/Houston, TXMECHANICAL ENGINEERS-BS degree, 7-15+ yrs exp needed in the fol-lowing: Heat transfer, rotating eqpt, subsea connectors, pipeline - Houston, TXI/E ENGINEERS-7-15+ yrs exp, BS degree a must, oil and gas, petrochem,refining, pipeline industry exp needed, specs, sizing control valves - Houston/Beaumont, TX and New Orleans/Baton Rouge, LA



GLOBAL CONTRACT PROFESSIONALSPUTTING GREAT PEOPLE IN GREAT JOBS!

BENEFITS AVAILABLELong Term Contracts - Top Per Diem Rates - Direct Deposit - Referral Fees

Immediate Enrollment into 401(k) Program (Roth & Traditional)Travel Reimbursement - Pre-Tax Discounted Insurance Benefits Available

SAVANNAH, GAAR/DER ELECTRICAL ENGINEERELECTRICAL ENGINEERSFINAL PHASE DESIGNERFLIGHT CONTROLS ENGINEERFLIGHT TEST INSTRUMENTATION ENGINEERIADS PROGRAMMERINDUSTRIAL DESIGNERIT PROJECT MANAGERMECH ENGINEER - AAP FINAL PHASE (TSIIC)MRB POWERPLANT / ECS ENGINEERQUALITY ENGINEERSIMULATION SOFTWARE ENGINEERSR TECHNICAL WRITERTOOL DESIGN

EAGAN, MNSOFTWARE ENGINEER

ALBUQUERQUE, NMNETWORK ENGINEER

KANSAS CITY, MOIT SYSTEMS SECURITY ENGINEER

TEXASBUSINESS APPLICATIONS PROGRAMMERDESIGN CHECKER SOLIDWORKSFINANCIAL ANALYSTIT SYSTEMS SECURITY ENGINEERMATERIALS ENGINEERSOFTWARE DEVELOPER ANALYSTTOOL DESIGNWEB DEVELOPER

VIRGINIAINFORMATION ASSURANCE ENGINEERINTEGRATION & TEST ENGINEERSOFTWARE ENGINEER

PENNSYLVANIAMULTIMEDIA DESIGNERQUALITY ENGINEER

NEW ORLEANS, LAELECTRICAL ENGINEERMECHANICAL ENGINEERTOOL DESIGN ENGINEERWELDING ENGINEER

ORLANDO, FLANALOG ENGINEERCHECKERELECTRICAL ENGINEERELECTRONIC PACKAGING ENGINEEREMBEDDED SOFTWARE ENGINEERFACILITIES ENGINEER / PLANNERINTEGRATION & TEST ENGINEERMECHANICAL ENGINEERMECHANICAL DESIGN ENGINEERSOFTWARE ENGINEER

MARIETTA, GATECHNICAL TRAINER

OWEGO, NYSOFTWARE DEVELOPERSOFTWARE ENGINEER

COLORADOMANUFACTURING ENGINEERMULTIMEDIA DESIGNERPROCESS ENGINEERSOFTWARE ENGINEERTHERMODYNAMICS

4000 Sandshell Drive, Ft Worth, TX 76137800-942-2376 or 817-847-6673 • FAX 817-847-9444

Contact one of our Recruiters for informationMark Milligan ~ 877-359-2160 ~ [email protected]

Daniel Miller ~ 877-227-2123 ~ [email protected]

Joey Taylor ~ 877-280-2156 ~ [email protected]


AIRCRAFT ENGINEERING & DESIGNNew Project!!! Openings for the following ...

If you are looking for work in the Connecticut area, please send a resume ASAP!!

•• Electrical DesignElectrical Design •• Material EngineersMaterial Engineers •• Mechanical DesignMechanical Design

•• Project EngineersProject Engineers •• Reliability EngineersReliability Engineers •• System EngineersSystem Engineers

•• Dimensional Design & AnalysisDimensional Design & Analysis •• Configuration ManagementConfiguration Management •• Manufacturing EngineersManufacturing Engineers

•• Manufacturing ControlManufacturing Control •• Test EngineersTest Engineers •• Tool DesignTool Design •• Quality EngineersQuality Engineers

• US Citizenship or Permanent Resident Required •

• Paid Holidays • Dental• United Healthcare Medical Insurance

• Vision • Direct Deposit

NOW HIRING!

Butler America provides industry-leading outsourced engineering, technology, telecom, and fleet maintenance servicesto premier companies in the aerospace, federal defense, manufacturing, commercial, and communications industries.

For more information, please visit www.butler.com. EOE/AA/M/F/D/V

Send resumes to:Jerry RothchildEmail: [email protected] Dial: 203/926-2705or Toll Free: 800/837-9114 x2705

www.butler.com

AIRCRAFT ENGINEERING & DESIGNCalifornia ...Mechanical Design Engineer - Mechanical Design Engineer - Flight controls, mechanisms, actuators, electromechanical, valves or hydraulics. UG NX

Iowa ...Electrical Engineer - Electrical Engineer - Applied experience designing and testing DO-254. Experience using RF CAE tools. Practical experiencein all aspects of RF hardware power amplifier design and development

South Carolina ...Mechanical Engineer - Mechanical Engineer - Flight/pilot controls experience in design and development. Experience with design, analysis, test anddevelopment

• US Citizenship or Permanent Resident Required •

• Paid Holidays • Dental• United Healthcare • Vision • Direct Deposit

NOW HIRING!

Butler America provides industry-leading outsourced engineering, technology, telecom, and fleet maintenance servicesto premier companies in the aerospace, federal defense, manufacturing, commercial, and communications industries.

For more information, please visit www.butler.com. EOE/AA/M/F/D/V

Send resumes to:Nikki DimanEmail: [email protected] Dial: 949/251-1731

www.butler.com



We’ll help you find the ideal job to meet your interests and qualifications!

Positions Available Now• STRUCTURAL DESIGNERS (CATIA V5)• MANUFACTURING ENGINEERS• INTERIOR DESIGNERS (CATIA V5)• ELECTRICAL DESIGNERS (CATIA V5)• TECHNICAL WRITERS• AVIONICS ENGINEERS• SOFTWARE ENGINEERS

• NC PROGRAMMERS (CATIA V5)• TOOL DESIGNERS (CATIA V5)• STRESS ENGINEERS (Patran, Nastran)• FLIGHT CONTROLS ENGINEERS• SYSTEMS ENGINEERS• QUALITY ENGINEERS• PROPULSION ENGINEERS• MANY OTHER POSITIONS

Benefits Package: Medical • Dental • Per Diem • 401(k) • Holiday • Vacation Pay

COMFORCE NorthwestCOMFORCE Northwest1750 112th Ave NE, Suite C228Bellevue, WA 98004Email: [email protected]

COMFORCE NortheastCOMFORCE Northeast225 Broadhollow Road, Suite 110EMelville, NY 11747Email: [email protected]

PLEASE EMAIL US TO SEE IF YOUR BACKGROUND MATCHES ANY OF OUR JOB OPENINGS

Belcan TechServices

HotWichita, Kansas

OpeningsLEAD ENVIRONMENTAL

CONTROLSDESIGN ENGINEER

LEAD FLIGHT CONTROLSDESIGN ENGINEER

LEAD FUEL SYSTEMSDESIGN ENGINEER

LEAD HYDRAULICSSYSTEMS ENGINEER

LEAD LANDING GEARDESIGN ENGINEER

PPlease send resumes tolease send resumes toLARRY HEADLARRY HEAD

Email:[email protected]

(800) 945-1900(800) 945-1900 Belcan TechServices

•Baltimore, Maryland•QUALITY ENGINEER - AS9102 First article inspection,

writing and reviewing

•Indianapolis, Indiana•SOFTWARE VERIFICATION/TEST - DO-178B Level A

SYSTEMS ENGINEERS - VerificationCERAMIC MATRIX COMPOSITE DESIGN ENGINEER

SUBSTATION/TRANSMISSION LINEPROJECT MANAGERS

•Cincinnati, Ohio•UTILITY PROJECT ENGINEERS

SOFTWARE ENGINEERS - Embedded, secret or top secretCODES AND STANDARDS ENGINEER - Medical Eqpt

V&V TESTING - Medical EquipmentCONTROLS ENGINEERS

•Erie, Pennsylvania•LOCOMOTIVE ENGINEERS

SYSTEMS ENGINEERCONTROLS ENGINEER - HMI

DIESEL ENGINEERS

PPlease send resumes tolease send resumes toLARRY HEADLARRY HEAD

Email:[email protected]

(800) 945-1900(800) 945-1900


Hundreds of openings available forinnovative, long-term projects with our

aerospace and defense clientele nationwide.Candidates withSECRET andTOP SECRET clearances arealso needed forpositions acrossthe country.

URGENT NEEDS IN SOUTH CAROLINA!!!• Aircraft Assemblers - Heavy structures / composite exp!• Quality Inspectors - Prior aerospace electrical/wiringinspection exp

Contact: [email protected] [email protected]

• Immediate Direct Position - Quality Engineer - Supplier,TQM, QMS, QA and FAA reg knowledge. Aerospace exprequired - Seattle, WA

• Immediate Direct Positions Available - Production Supervisor-2nd shift, machine shop and leadership exp reqd, ElectricalEngineer -Digital, analog embedded systems exp. Aerospaceexp required - Everett, WA

• Immediate, Direct Positions Available - Program Manager,Manufacturing Manager, Supplier Quality Engineer, ProgramBusiness Analyst, Sr Financial Program Analyst-Aerospace exp required, interiors preferred - Marysville, WA

• Immediate Positions Available - Assemblers, Painter, DesignChecker, Product Support, Program Admin, ProjectCoordinator-Aerospace exp required - Tucson, AZ

• Immediate Direct Positions Available - Lean Manager,Operations Manager-Degreed, min 7 yrs in related/relevantexp in aerospace required - Santa Barbara County, CA

• Immediate Direct and Contract Positions Available -Reliability Engineer, Mechanical Design Engineer, StressEngineer, Electrical Engineer, Cert Engineer,Flammability Engineer, Systems Engineer, Tech Writers-Aerospace exp required. Aircraft interiors/monuments exppreferred - Orange County, CA

Contact: [email protected] [email protected] [email protected]

VISITjobs.yoh.com today

EXPLORENEW HEIGHTS WITH

Seattle, WA 425-732-6070 l St. Louis, MO 314-878-0666Denver, CO 303-280-9000 • Phoenix, AZ 602-235-9739

For more information about Yoh, visit yoh.com©2013 Yoh Services LLC - a Day & Zimmermann Company

HELICOPTER CONTRACTSSTRATFORD, CT

AEROSTRUCTURES MANUFACTURINGENGINEERS

AVIONICS SYSTEMINTEGRATION ENGINEERS

DETAIL DESIGN ENGINEER - CATIA V5

ENGINE INSTALLATION ENGINEERSGROUND TEST STRUCTURAL ENGINEERS

GROUND TEST LAB TECHNICIANSINTEGRATION ENGINEERS - C++

LEAD SYSTEM ENGINEER - DOORS

PROPULSION CERTIFICATION ENGINEERPROPULSION DESIGNERS - CATIA V5

QUALITY/RELIABILITY ENGINEERSSR AIRFRAME STRESS ENGINEERS

Contact Nancy [email protected] • 860/916-9873

Contact Marisa [email protected] • 860/916-4102

Belcan TechServices

East Hartford, CT Office

Toll Free - 866-APS-EDGE(866-277-3343)

Visit us on the web atwww.apollopros.com

... BRANCH OPENINGS ...CONNECTICUT - Airframe Stress Analyst (27663) ODA/UM withstatic and fatigue delegation for airframe structures & landing gear. Stress analy-sis & report - CT • System Engineer (26768) Analysis, decomposition and allo-cation of high level requirements. Requirements performed using DOORS data-base - CT • Integration Engineer (26832) Avionic databus protocols (ARINC,Mil-Std-1553, etc), Real-Time simulation programming and developing

... Email: [email protected]

FLORIDA - Sr Stress Engineer (27872) 777 experience, nacelles exp,FEA, analysis - KS, OK • Mech Engr (27614, 27581) DO-160 & Mil Specs,SolidWorks, AutoCAD - DE, MA • Sr Sales Engineer (27958) Maintenance andservice on business jets - IN • NC Programmer (27650) MasterCam, soft met-als, 3, 4, & 5 axis - KS ... Email: [email protected]

MARYLAND - Industrial Mgr/Planner (27519) Coordinate activitiesacross CIPT - CT • Quality Engr (25844) Corrective actions - CT & CA

... Email: [email protected]

MISSOURI - Structural Engineers (29999) Jet modifications/upgrades,formal/hand calcs, SolidWorks - Midwest • Design Engineers (29998) SolidWorks,business jets, secondary structures, interiors - Midwest • Design Engineer-Aerostructures (27552) BS/MSME degree, ABET, metals and composites - Direct -MO • Manufacturing Engineer/NC Programmer-NX (28013) Parts, path, toolingdesign - Direct - FL ... Email: [email protected]

Other Offices: Arizona - [email protected] - [email protected]

No. California - [email protected], New Hampshire - [email protected]


Check out our website at:www.advancedtechno.com

Mechanical Engineering PositionsMechanical Engineering Positions• CATIA Designers - Composites• BSME - 2000 hrs Pro/E (MA, MN, TX)• Stress Engineers - Nastran• FEA Engineers - Recent FEMAP• UG Electrical Designers• Manufacturing & Methods Engineers - Visual Instruction Tools• Avionics EEs• SolidWorks Design - Aircraft structures / industrial machine

Send resume to [email protected]

Software & Hardware OpeningsSoftware & Hardware Openings• Embedded Programmer - CAN• Software Engineer - Embedded development and strong C++,

OOD (CT)• Software Build Release Engineer or Coordinator (Midwest)• DSP Engineer - Any chipset• Board Level and FPGA Design Engineers• Test Equipment Engineer• Motor Controls Engineer• Power Supply Engineer


PHONE: 877-334-7700FAX: 877-335-7700

TM

★ SPECIAL ADSPECIAL AD ★DESIGN ENGINEER

Bachelor’s degree or academic equivalent of Bachelor’s inComputer Science, Mechanical Engineering or related field,

plus 5 years exp in CAD and Pro/E Wildfire to design systemsand components for trucks and heavy duty vehicles.

Will require travel to unanticipated client sites in US forextended periods on short notice. Job in Walpole, MA

Mail resumes to:Attn: HR, Advanced Technology Innovation Corp,PO Box 32, Walpole, MA 02081. No calls! EOE


Positive environment • Group Life • Health / DentalLTDI • 401(k) • Paid Gym Membership

Advanced Technology is an Equal Opportunity / Affirmative Action Employer

Technical & EngineeringStaffing

Armonk, NY - 914-940-2750Dallas, TX - 800-784-6545Irvine, CA - 877-241-4124

Jacksonville, FL - 877-601-9193Knoxville, TN - 800-574-8324

Los Angeles, CA - 866-993-2440Mobile, AL - 800-784-6529Oklahoma - 800-633-6594

Philadelphia, PA - 877-239-2877San Jose, CA - 866-656-0539

St Louis, MO - 866-296-3068

MULTIPLE OPENINGS FOR PDS PIPING DESIGNERS, ELECTRICALENGINEER, I&C ENGINEER AND ELECTRICAL DESIGNER-Must be ableto interview in person - South Jersey-For above openings, contact Chris Aiello at [email protected]

DESIGN ENGINEERS-Pro-cabling exp - North Texas AreaAVIONICS/ELECTR SYS ENGINEER-Must have BSEE - Stratford, CTSTRUCTURAL/MECH DES ENGR-CATIA V5 exp, $50/hour - Dallas, TXMANUFACTURING & STRESS ENGRG POSITIONS - Savannah, GASTRESS ENGINEER-Nastran/Patran - Dallas, TXAVIONICS SYSTEMS/INTEGRATION ENGINEER-Space exp - Waco, TX

-For above openings, contact Michael Geil at 800-784-6545 x252or email: [email protected]

AVIONICS ENGR-Avionics architectures & DOORS - Contract in ConnecticutSR STRESS ENGRS-Aircraft interiors, 4-10 yrs primary and seconary struc-tures, lavs, galleys, stowage bins, etc. UG NX/CATIA, Nastran/Patran/FEMAP. Multiple positions, LT - Marysville/Everett, WA-Kevin Fedor at 866-656-0539 x9511 or email: [email protected]

PROCESS PIPING/MECHANICAL DESIGNER-SolidWorks-3-5 yrs expprocess piping des/routing for high pressure fluids, LT - San Bernardino, CA-Dina Romero at 949-415-5477 or email: [email protected]

ENGINEERING GURU-Large scale project management role building rollercoasters. 10+ years PM exp. Theme park exp desired - Travel required - LosAngeles, CA-Alex Knox at 818-876-9610 or email: [email protected]

QUALITY ENGINEER-AEROSPACE COMPOSITE STRUCTURES-4-8 yrs in QE/QA and mfg environment - LT - Pasadena/Monrovia, CA-Amanda Gonzalez at 866-993-2440 or email: [email protected]

The fastest way to a new career or contract position - APPLY ONLINE!JSG Online Career Center: http://cli.gs/JSGJobs

Atlanta, GA - 800-841-0927Birmingham, AL - 800-569-3555Charleston, SC - 800-215-3555Chicago, IL - 800-323-4987

HOT CONTRACT NEEDSTHROUGHOUT THE COUNTRY(Sign on Bonus, Travel Pay, Per Diem & Benefits Package

Available on Some Assignments)

New Opportunity - Immediate NeedsCall our National Recruiters

QUALITY ENGINEERS - Aerospace products, NPI - Northeast CoastPLC PROGRAMMER/CONTROLS ENGR - AB, robotic welding exp - LTCONTROLS ENGINEERS - Industrial automation exp, Siemens Step 7,WonderwareUG NX DESIGNERS - 3D modeling, GD&T, sheet metal, assembly/detail - US CitizenAUTOCAD-ELECTRICAL CAD MODULE DESIGNER - Wiring, electri-cal for automation and powerINVENTOR CAD DESIGNER - Electrical panel / control panels, wiringSOFTWARE OR PRO/E-BSME DESIGN ENGINEER - Mechanisms,gears, military - Northeast - US Citizen - SecretSR PCB DESIGNERS - Cadence Allegro, Concept or ORCAD - EastCoast - LTIC LAYOUT DESIGNERS - Analog, mixed signal, Cadence/Assura -Bay Area, CA

• Contact Adam, Sean, Peter or Bob •at 800-661-8272 • email: [email protected]

SPI

SYSTEM PROSADDITIONAL CONTRACT SERVICES

NATIONAL DIVISIONwww.acsnatl.comwww.syspros.com

85 Rangeway Road, Bldg 1, Suite 2 • North Billerica, MA 01862800/661-8272 • 24 Hr Fax: 800/661-4055


(800) 820-6811 www.worktek.com

HUNDREDS OFNATIONWIDE OPENINGS

California ...DER ANALYSTS • MECHANICAL ENGINEERS

Washington ...FACILITIES • SCHEDULERS • PLANNERS • STRESS ENGINEERS

St Louis ...PROGRAMMERS • EMBEDDED SOFTWARE ENGINEERS

Virginia ...JR SOFTWARE ENGINEERS

Employee Benefits: $$ign on Bonus • Paid Holidays • Annual Bonuses • Referral BonusesMedical Insurance • Life Insurance • 401(k) • Per Diem • Direct Deposit WeeklyFor Immediate Consideration, Call Dan Ellis at 800/820-6811

Email: [email protected] or Apply Online at www.worktek.com


SUBSCRIBERSERVICES

Hot Sheet of Available Contractors:For unemployed subscribers (or those with layoffnotices). We email your name, address, phone,email address, a link to your online resume, and jobclassification(s) to our advertising contract staffingfirms.

Online Profile:Every day, recruiters perform hundreds of searchesof our resume database, usually locating multipleresumes that match their keyword search. Oftensubscribers have certain requirements that do notgenerally appear on their resumes. For example: Areyou currently available, or are you working now andwon't be available for a couple of months? ... What isthe minimum rate you will accept? ... etc. Your per-sonal profile allows you to make that informationavailable to recruiters. It is critical that you keep yourprofile very current ... especially the status of youravailability. This service is only as effective for you asthe effort you devote to it.

My JobTracker:Track your saved jobs and any follow-ups you’vemade to recruiters. All records in one place for yourjob searches, responses, and notes about theassignment. Our latest subscriber service ... and oneof the most valuable!

EZjobs:Subscribers can receive each day's new job postingsfor openings that match their pre-set keywords.Those listings will be emailed to you stating thename of the recruiting firm, contact information, andall the data we have about each job.

Resume Email Forwarding History:Subscribers can track their resume forwarding histo-ry to see when and to whom their resume has beenemailed from our website. This service tracksresumes sent by: job searches using E-Resume,individual resumes sent to any of our advertisers,and updated resume distribution.

Resume View Notification:Every time your resume is viewed, downloaded orprinted by a contract staffing firm ... we immediatelyemail you a notification. Included in the email is thename of the firm, the recruiter's name (if known),keywords that the recruiter used to find your resume,and contact information. Keep in mind that we musthave your current email address on file in order foryou to participate in this service. Here, too, you mayopt out this service if you choose.

Mail Forwarding Service:You can have a permanent (or forwarding) addressto guarantee yourself of constantly receiving yourmail. If you are interested in using this service, con-tact our office for details. Email [email protected] call (425) 806-5200. Please Note: you must be auser of our Mail Forwarding Service if you put ouraddress on your resume for contact information.Cost: $10/month, charged to your account at thebeginning of the month. If no mail is forwarded, thischarge is refunded to your account at the end of themonth. As long as you have a mail forwardingaccount active, you will be charged for the serviceonly if we actually forward your mail at least onceduring a calendar month.

Free Email Account:If you are a ContractJobHunter or ContractEmployment Weekly subscriber who uses email a lot... this subscriber service will probably be of interestto you. This service is free, as long as you keep yoursubscription current. Restrictions: Any single docu-ment (either sent or received) cannot exceed 500K insize; the total amount of space allotted to any sub-scriber is 5 megabytes; you may select your ownpersonal email address. We suggest using yourname (Example: [email protected]).

Discussion Forums:Subscribers can leave messages and questions forother subscribers on this board. Discussed subjectshave included: Insurance for contractors ... overtimeon full rate ... job locations ... pre-employment drugtesting ... and lots of contractors looking for oldfriends.

C.E. Publications, Inc. • P.O. Box 3006 • Bothell, WA 98041 • 425/806-5200 • Fax 425/806-5585 • [email protected] • www.cjhunter.com


INCONENCONTRACT / TEMPORARY SERVICES

Openings in Savannah, GAELECTRICAL APPLICATIONSELECTRICAL APPLICATIONS

ENGINEERSENGINEERSDevelop Electrical Wiring Interconnect System (EWIS), capable ofresolving all technical issues relating to EWIS. Produce and maintainwiring diagrams, cable/wire harness assemblies and rack/paneldesigns from electrical system schematics adhering to EWIS require-ments. Select qualified electrical components, such as connectors,backshells and other parts. Must have intimate knowledge of andability to assign wires/cables to their correct harness assembly,based on EMI/EMC and system separation or system functionalityrequirements while meeting all installation and maintainabilityrequirements. Mentor L-Cable

EHI ENGINEERSEHI ENGINEERSDevelop Electrical Wiring Interconnect System (EWIS), capable ofresolving all technical issues relating to EWIS. Produce and maintainwire harness assemblies, utilizing the CATIA V5 electrical and sheetmetal work benches. Capable of interfacing with wiring diagrams,system and EMI/EMC requirements. Must have intimate knowledgeof and ability to assign wires/cables to their correct harnessassembly, based on EMI/EMC and system separation or systemfunctionality requirements while meeting all installation and maintain-ability requirements

Send resumes to: [email protected] • (888) 208-8064

Aerospace News – Lockheed tosupply DOD with F-35s for $4 Billion - ThePentagon has signed a deal withLockheed Martin for the manufacturer tosupply an eighth batch of F-35 fighterjets, an order of about $4 billion that cov-ers planes to be supplied to allies as well.The deal for 43 planes includes a 3 per-cent decrease in the cost per jet, sources

say ... Brazil's Gol looks to Boeing, Embraer for jet replacement -Brazilian airline Gol plans to replace its older aircraft and is said tobe considering Boeing's updated 737 Max 7 or an updated E2from Embraer. The order could be worth up to $1.7 billion, sourcessay ... Rolls-Royce finalizes engineering joint venture withHispano-Suiza - British engineer Rolls-Royce (RR.L) said on Fridayit has finalised a deal to create a joint venture which will designand develop accessory drive train transmissions for all of the com-pany's future civil aircraft engines. The joint venture with HispanoSuiza, part of French aerospace and defense company Safran(SAF.PA), will run for an initial 25-year contract and will contributeto a range of aircraft including engines for the new AirbusA330neo jet. The companies said a production plant would bebuilt in "a competitive country" starting next year ... Deal struck onnew missile production between Lockheed Martin and Roketsan -Lockheed Martin will produce and sell Turkey's SOM-J air-launched cruise missile for the F-35 Lightning II combat jet underan agreement signed with Roketsan. "We believe this joint effortwill increase awareness of the SOM-J and present an excellentopportunity to fulfill the requirements of the anti-surface warfarecapabilities on the F-35 aircraft," said Roketsan Chairman EyupKaptan ... Aerospace firms find growth outside defense - With mil-itary spending flat, aerospace manufacturers have been growingtheir nonmilitary business, and investors are rewarding theirefforts. Analysts are giving brighter forecasts to General Dynamicsand Boeing, for example, as those firms invest in nonmilitary avia-tion.(Aerospace News reprinted from AIA Daily Lead, AerospaceIndustries Association)

CONTRACTS AWARDED: Wiley Wilson Burns & McDonnell Joint Venture, Alexandria,Virginia, is being awarded a maximum amount $75,000,000 contract for engineering and design services forgeneral and administrative facilities. The Naval Facilities Engineering Command, Washington, DC, is the con-tracting activity … Northrop Grumman Corp. Electronic Systems, Linthicum Heights, Maryland, is being award-ed a $207,291,682 modification to a previously awarded contract for procurement of four Ground/Air Task-Oriented Radar (G/ATOR) low-rate initial production systems, including operating spares, contractor engineer-ing services and support, developmental and operational test support, and transition to production. The MarineCorps Systems Command, Quantico, Virginia, is the contracting activity … Bechtel Plant Machinery Inc.,

Monroeville, Pennsylvania, is being awarded a $612,758,634 contract for naval nuclear propulsion components. The Naval Sea SystemsCommand, Washington, DC, is the contracting activity … Lockheed Martin Corp., Lockheed Martin Aeronautics Co., Fort Worth, Texas, isbeing awarded a maximum $110,515,999 delivery order against a previously issued basic ordering agreement for the procurement andinstallation of 281 retrofit modification kits to incorporate into designated aircraft and supporting subsystems that are critical to meeting F-35 requirements. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity … Louis Berger Group, Inc.,Morristown, New Jersey, was awarded a $95,000,000 contract to enable the U.S. Army Corps of Engineers to assess power requirements,install diesel-powered emergency generators, and fuel, operate and maintain generators at critical facilities when requested by a state orterritory within 24-hours of receiving a mission assignment for emergency support. U.S. Army Corps of Engineers, Pittsburgh District,Pittsburgh, Pennsylvania, is the contracting activity ... Airbus Defense and Space, Inc., Herndon, Virginia, was awarded an $82,917,199modification to a contract to acquire 17 72A Lakota helicopters with airborne radio communications 231 radios. Army ContractingCommand, Redstone Arsenal (Aviation), Redstone Arsenal, Alabama, is the contracting activity.

INDEX OFCONTRACT STAFFING FIRMS

NEW & ONE-TIME ADVERTISER:This firm may have job requirements elsewhere in this issue

Windspeed Technologies2615 W. Casino Road, Suite 4BEverett, WA 98204425/248-0372, FAX 800/568-0556www.windspeedtech.comemail: [email protected]

804 Technology5381 Highway N, Suite 201Cottleville, MO 63304636/928-0330, FAX 636/530-3693www.804technology.comemail: [email protected]

Acro Service Corporation39209 6 Mile Road, Suite 250Livonia, MI 48152734/591-1100, 800/844-ACRO, FAX 734/591-1217www.acrocorp.comemail: [email protected]

Additional Contract Services(please see our display ad)85 Rangeway Road, Building 1, Suite 2North Billerica, MA 01862800/661-8272, FAX 800/661-4055email: [email protected]

Additional Technical Support, Inc. (ATSI)495 Old Connecticut Pass, Suite 110Framingham, MA 01701-4567877/871-0785email: [email protected]

Adecco Technical2526 W Wackerly StreetMidland, MI 48640989/496-9377, 800/351-6646, FAX 989/496-2649www.adeccotechnical.comemail: [email protected]

Adecco Technical9171 Towne Centre Drive, Suite 215San Diego, CA 92122www.adeccousa.comemail: [email protected]

Ad-Tek Engineering Services Inc.2090 N Tustin Ave Ste 160Santa Ana, CA 92705714/573-7700, 800/451-0782, FAX 714/832-8790www.adtekjobs.comemail: [email protected]

Advanced Technology(please see our display ad)P.O. Box 32Walpole, MA 02081877/334-7700, FAX 877/335-7700www.advancedtechno.comemail: [email protected]

Advantage Technical Resourcing, Inc.10632 Little Patuxent Parkway, Suite 337Columbia, MD 21044800/888-7864, FAX 410/715-9706www.hirethinking.comemail: [email protected]

Advantage Technical Resourcing, Inc.P.O. Box 9130Norwood, MA 02062781/251-8100, 800/225-8956, FAX 800/934-6644www.hirethinking.comemail: [email protected]

Advantage Technical Resourcing, Inc.101 Metro Drive, Suite 264San Jose, CA 95110877/912-5720, FAX 408/452-9360www.hirethinking.comemail: [email protected]

Aerostructures Contract Employees Inc.2306 Oak Lane, Suite 203Grand Prairie, TX 75051972/263-3403, FAX 972/263-9518email: [email protected]

Aerotek, Inc.9800 Cavendish Boulevard, Suite 120St Laurent, QC Canada H4M 2V9514/798-6450, FAX 514/798-6480www.aerotek.comemail: [email protected]

Agente Technical714 Centerpark Drive, Suite 140Colleyville, TX 76034-2852866/758-2494, FAX 866/717-5927www.agentetech.comemail: [email protected]

Airetel Staffing Inc.P.O. Box 915864Longwood, FL 32791-5864407/788-2015, 877/877-4066, FAX 407/682-9705www.airetel.comemail: [email protected]

Allstates Consulting Services16200 Addison Road, Suite 250Addison, TX 75001214/736-7165www.allstatesconsulting.netemail: [email protected]

American Contract Group47 High Street, Suite 103North Andover, MA 01845978/984-5581, 877/723-9087, FAX 978/208-8246www.americancontractgroup.comemail: [email protected]

Apollo Professional Solutions, Inc.(please see our display ad)Corporate Headquarters29 Stiles Road, Suite 302Salem, NH 03079603/890-8778, 866/277-3343, FAX 603/890-6668www.apollopros.comemail: [email protected]

—additional Apollo Professional Solutions offices:

Glen Burnie, MD Roseville, CALakewood, CA Wildwood, MOMesa, AZ Windsor Locks, CTOrange Park, FL

Aries Group100 Cummings Center, Suite 219QBeverly, MA 01915978/998-7577, 877/806-7977, FAX 978/998-6841www.ariesgroupinc.comemail: [email protected]

Arnold-Hanafin Corp.7400 North Federal Highway, Suite C-6Boca Raton, FL 33487-1677561/982-9570, 800/891-1086, FAX 561/982-9896www.arnold-hanafin.comemail: [email protected]

Associated Staffing Inc.626 Holcomb Bridge Road, Suite 600Roswell, GA 30076770/643-8554, 888/427-4562, FAX 770/643-8558www.asi-ga.comemail: [email protected]

Belcan TechServices(please see our display ad)Corporate Headquarters11591 Goldcoast DriveCincinnati, OH 45249513/489-4300, 800/945-1900, FAX 513/489-0830www.belcan.comemail: [email protected]

Belcan TechServices(please see our display ad)20 Westbrook Street, Suite 2NEast Hartford, CT 06108-3400860/916-4102www.belcan.comemail: [email protected]

Bentley Global Resources LLC3937 Tampa Road, Suite 3Oldsmar, FL 34677-3115813/854-1500, FAX 813/854-1605www.bentleygr.comemail: [email protected]

Black Diamond Networks23 Main StreetAndover, MA 01810978/474-9980, 800/681-4734, FAX 978/470-0225www.blackdiamondnet.comemail: [email protected]

Butler America(please see our display ad)2500 Red Hill Avenue, Suite 200Santa Ana, CA 92705949/251-1731www.butler.comemail: [email protected]

Butler America(please see our display ad)Shelton Pointe, Suite 2042 Trap Falls RoadShelton, CT 06484203/926-2705, FAX 203/926-0082www.butler.com, email: [email protected]

CadStar International Ltd.100 Burtt Road, Suite 202Andover, MA 01810-5915800/562-8367, FAX 888/432-9737www.cadstar.comemail: [email protected]

Can-Tech Services1750 Steeles Avenue W, Suite 205Concord, ON L4K 2L7, Canada416/360-0926, FAX 416/360-0521www.cantechservices.comemail: [email protected]

CDI Corporation500 Northridge Road, Suite 240Atlanta, GA 30350www.cdicorp.com, email: [email protected]

Chipton Ross(please see our display ad)343 Main StreetEl Segundo, CA 90245310/414-7800, FAX 310/414-7808www.chiptonross.comemail: [email protected]

Choson Resource1999 N. Amidon Ave, Suite 100BWichita, KS 67203316/729-0312, FAX 316/729-0709www.chosonresource.comemail: [email protected]

Comforce Technical Services(please see our display ad)999 Stewart Avenue, Suite 100Bethpage, NY 11714-3632516/470-6996, 800/562-0123, FAX 516/622-0650www.comforce.com, email: [email protected]

—additional Comforce office:

Bellevue, WA

CompuCom11900 NE 1st Street, Suite 200Bellevue, WA 98005425/974-2000, FAX 425/974-2001www.compucom.comemail: [email protected]

Concise Technologies20530 Route 19Cranberry Township, PA 16066724/591-5869, FAX 724/591-5713www.concisetechnologies.netemail: [email protected]

CSS Staffing263 E Main Street, 2nd Floor, Suite ANewark, DE 19711302/737-4920www.cssstaffing.com, email: [email protected]

CTS International(please see our display ad and online banner)11100 NE 8th Street, Suite 800Bellevue, WA 98004425/646-2688, FAX 425/635-7630www.ctsinternational.com

Delta Technical Solutions3601 Algonquin Road, Suite 975Rolling Meadows, IL 60008847/387-8057, FAX 866/366-5061www.dts.netemail: [email protected]

Dineen Enterprises, Inc.P.O. Box 185Uniontown, OH 44685-0185330/633-1210, FAX 330/633-1284www.cjhunter.com/~dineenemail: [email protected]

Enea Software & Services, Inc.1711 W. Greentree Drive, Suite 108Tempe, AZ 85284-2714480/753-9200, FAX 480/753-6400www.enea.com, email: [email protected]

REGULAR INDEX ADVERTISERSREGULAR INDEX ADVERTISERS


ESG-Engineering Services Group99 Cherry Hill Road, Suite 307Parsippany, NJ 07054973/334-4844, 800/258-1465 x206, FAX 800/354-1788www.entegee.comemail: [email protected]

Foster Design Inc.200 W Douglas, Suite 110Wichita, KS 67202316/832-9700, 800/345-3394, FAX 316/832-9357www.fosterdes.comemail: [email protected]

GAS/Go Consulting Group Inc.12 Harding Street, Suite 204-205Lakeville, MA 02347508/230-5030, 800/510-8050, FAX 508/230-5052www.gcg-itstaffing.comemail: [email protected]

GCR Professional Services281 Cambridge StreetBurlington, MA 01803781/270-7020, 800/234-6646, FAX 781/270-4488www.gcrtemps.comemail: [email protected]

Global Contract Professionals(please see our display ad)P.O. Box 161127Fort Worth, TX 76161-1127817/847-6673, 877/280-2156, FAX 817/847-9444www.teamglobal.comemail: [email protected]

Global Search Agency Inc.1712 S Main StreetFairfield, IA 52556-9577641/472-2735, 800/844-4658, FAX 641/469-6084www.globalsearchagency.comemail: [email protected]

Hampton Scott Group5535 Balboa Boulevard, Suite 100Encino, CA 91316818/907-1639www.hamptonscott.comemail: [email protected]

HEPCO, Inc.160 Pehle Avenue, Suite 202Saddle Brook, NJ 07663-5227201/843-4400, 800/656-0099, FAX 201/843-0025www.hepcoinc.com, email: [email protected]

Hi-Tec Professional Solutions2501 E Piedmont Road, Suite 103Marietta, GA 30062-7753770/575-5855, FAX 770/575-5856www.hi-tecsolutions.comemail: [email protected]

Hi-Tek Professionals Inc.850 Chester PikeProspect Park, PA 19076610/534-8701, 888/271-1799, FAX 610/534-8697email: [email protected]

Ideal Engineering Staffing Solutions26148 Capital Drive, Suite BDaphne, AL 36526251/621-0242, 800/370-8495, FAX 800/264-6702www.idealengineeringus.comemail: [email protected]

Idex Solutions1650 NW Naito Parkway, Suite 120Portland, OR 97209503/295-1808, 888/256-7913, FAX 800/295-5438www.idexsolutions.com, email: [email protected]

IMCP.O. Box 46Murrysville, PA 15668-0046724/733-9900, FAX 724/733-7004www.imcjobs.net, email: [email protected]

Inconen(please see our display ad)6133 Bristol Parkway, Suite 232Culver City, CA 90230310/410-1931, 888/208-8064, FAX 310/410-1751www.inconen.com, email: [email protected]

Ingenium Technologies4216 Maray DriveRockford, IL 61107815/399-8803, FAX 815/399-8804www.ingeniumtech.com, email: [email protected]

Innovative Alliance Solutions LLCP.O. Box 292632Sacramento, CA 95829www.iasnetwork.comemail: [email protected]

ITC-Innovative Turnaround ControlsP.O. Box 5835Pasadena, TX 77508281/998-9547, 866/268-7311, FAX 281/998-9437www.turnaroundcontrols.comemail: [email protected]

John Galt Staffing77 S Bedford StreetBurlington, MA 01803781/273-9995, 888/946-4754, FAX 781/273-9099www.j-galt.comemail: [email protected]

Johnson Service Group(please see our display ad)Corporate Headquarters1 East Oak Hill Drive, Suite 200Westmont, IL 60559630/655-3500, 800/323-4987, FAX 630/655-3506www.jsginc.comemail: [email protected]

—additional Johnson Service Group offices:

Armonk, NY Knoxville, TNAtlanta, GA Mobile, ALBedford, TX North Charleston, SCBirmingham, AL Philadelphia, PACalabasas, CA San Jose, CACameron, OK St Augustine, FLIrvine, CA St Louis, MO

Judge Technical ServicesNational Division321 S Main Street, Suite 100Providence, RI 02903-7110401/454-5100, 800/765-5874, FAX 401/454-7800www.judge.comemail: [email protected]

KEAS Inc.P.O. Box 1564Woodinville, WA 98072425/770-2662, FAX 425/491-2981www.keasinc.comemail: [email protected]

Kelly Engineering Resources3655 Brookside Parkway, Suite 100Alpharetta, GA 30022678/317-4489, FAX 678/893-0935www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources15325 SE 30th Place, Suite 320Bellevue, WA 98007-6538425/643-0138, FAX 425/747-4649www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources7535 E Hampden Avenue, Suite 610Denver, CO 80231-4838303/755-1107, FAX 303/755-1023www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources5750 Castle Creek Parkway, Suite 187Indianapolis, IN 46250317/916-1044, FAX 317/916-1336www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources1815 S Meyers Road, Suite 850Oakbrook Terrace, IL 60181630/705-0594, FAX 630/705-0677www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources100 Meridian Centre Boulevard, Suite 315Rochester, NY 14618585/235-0230www.kellyengineering.comemail: [email protected]

Kelly Engineering ResourcesRoute 120 & Wilson Road, WG1-3SRound Lake, IL 60073847/270-5032, FAX 847/270-5049www.kellyengineering.comemail: [email protected]

Kelly Engineering Resources55 Westport Plaza, Suite 470St Louis, MO 63146314/275-7794, 866/656-8416, FAX 314/514-1589www.kellyengineering.comemail: [email protected]

Keltia Design Inc.2615 W Casino Road, Unit 1AEverett, WA 98204206/368-9812, FAX 206/237-8950www.keltia-design.comemail: [email protected]

Kforce3 Corporate Drive, Suite 214Shelton, CT 06484203/225-1700, FAX 203/926-1414www.kforce.comemail: [email protected]

KLM Consulting Inc.5 Forte TrailSmithfield, RI 02917401/954-6003, FAX 401/349-0404www.klmcinc.comemail: [email protected]

LMI Aerospace4838 Ronson Court, Suite RSan Diego, CA 92111800/677-7868www.lmiaerospace.comemail: [email protected]

Manpower Professional4100 Osuna NE, Suite 102Albuquerque, NM 87109505/998-6200, 888/275-0234, FAX 505/998-6225www.manpowerprofessional.com/albuquerqueemail: [email protected]

Midcom Corporation1275 N Manassero StreetAnaheim, CA 92807714/630-1999, 800/737-1632, FAX 714/459-7055www.midcom.comemail: [email protected]

MIT-Manufacturing & Industrial Technologies525 Goldengate, Suite 100Lake Orion, MI 48362877/832-4648 x250, FAX 248/693-9455www.mfgind.comemail: [email protected]

Moseley Technical Services Inc.7500 S Memorial Parkway, Suite 215-RHuntsville, AL 35802256/880-0446, FAX 256/880-0936www.moseleytechnical.comemail: [email protected]

Multax Systems Inc.505 N. Sepulveda Boulevard, Suite 7Manhattan Beach, CA 90266310/379-8398, FAX 310/379-1142www.multax.net, email: [email protected]

National Engineering Service Corp.(please see our display ad)Corporate Headquarters72 Mirona RoadPortsmouth, NH 03801603/431-9740, 800/562-3463, FAX 603/427-0573www.natleng.com, email: [email protected]

—additional National Engineering Service Corp. office:

Houston, TX

National Recruiting Group48 S Service RoadMelville, NY 11747631/396-9600, 877/500-1300, FAX 877/500-1329www.nrgusa.com, email: [email protected]

Nesco Resource2 Summit Park Drive, Suite 200Independence, OH 44131216/674-5685, FAX 216/328-8173www.nescoresource.comemail: [email protected]

Nesco Resource153 Parliament Loop, Suite 1001Lake Mary, FL 32746407/719-8000, FAX 407/710-8001www.nescoresource.comemail: [email protected]


Nesco Resource1400 E Southern Avenue, Suite 330Tempe, AZ 85282206/333-0459, FAX 480/898-1720www.nescoresource.comemail: [email protected]

NORAMTEC Consultants(please see our display ad)208 Mill Street, 1st FloorRochester, NY 14614585/777-4040 x114, FAX 585/263-1840www.noramtec.comemail: [email protected]

OLSA Resources Inc.3836 N. Ballast StreetPortland, OR 97217503/608-7895, FAX 503/608-7896www.olsaresources.comemail: [email protected]

On Assignment26745 Malibu Hills RoadCalabasas, CA 91301818/871-3312, FAX 877/242-2346www.onassignment.comemail: [email protected]

Oxford Global Resources Inc.100 Cummings Center, Suite 206LBeverly, MA 01915800/426-9196, FAX 978/538-1617www.oxfordcorp.comemail: [email protected]

Pantheon Group Inc.P.O. Box 72Walpole, MA 02081888/844-7480 x2002, FAX 888/444-7481email: [email protected]

PDS Technical Services(please see display ad)Corporate HeadquartersP.O. Box 619820Dallas, TX 75261-9820214/647-9600, 800/270-4737, FAX 888/740-1212www.pdstech.com

—additional PDS Technical Services offices:

Anchorage, AK San Antonio, TXAtlanta, GA Santa Ana, CAAustin, TX Santa Clara, CABellevue, WA Savannah, GACharleston, SC Seattle, WAEast Hartford, CT St Louis, MOGreen Bay, WI Tampa, FLHouston, TX Tempe, AZIrving, TX Westlake Village, CA

Peak Technical Staffing USA(please see our display ad)Corporate Office583 Epsilon DrivePittsburgh, PA 15238888/888-7325, FAX 800/462-9275www.peaktechnical.comemail: [email protected]

—additional Peak Technical offices:Horsham, PA Oceanside, CAIrvine, CA Sunnyvale, CAItasca, IL Troy, MINew York, NY Woodland Hills, CACalgary, ON, Canada

Precision Personnel Inc.600 Cleveland Street, Suite 700Clearwater, FL 33755727/449-0600, 877/600-2333, FAX 727/449-0627www.precisionpersonnel.comemail: [email protected]

Precision Resource Company Inc.P.O. Box 318Sharon, MA 02067888/431-6300, FAX 888/431-6301www.prcnational.comemail: [email protected]

Productive Data Solutions6870 West 52nd Avenue, Suite 107Arvada, CO 80002303/220-7165, FAX 303/220-7425www.pdsinc.comemail: [email protected]

RCM Technologies Inc.(plese see our display ad)1 Waterview Drive, Suite 204Shelton, CT 06484-4368203/225-5700, FAX 203/377-6298www.rcmt.comemail: [email protected]

Remx Specialty Staffing42231 6th Street West, Suite 205Lancaster, CA 93534888/872-2505, FAX 877/897-8722www.remxengineering.comemail: [email protected]

Softworld Inc.281 Winter Street, Suite 301Waltham, MA 02451781/373-8453www.softworldinc.comemail: [email protected]

Source Group Professionals Inc.4729 E. Sunrise Drive, Suite 244Tucson, AZ 85718888/352-8797, FAX 866/835-2145www.sourcegrouppros.comemail: [email protected]

Southern Design Services Inc.155 Tradd StreetSpartanburg, SC 29301864/278-5000, 888/697-3869, FAX 864/278-5005www.southerndesigninc.comemail: [email protected]

Spencer Reed Group100 Oceangate, Suite 900Long Beach, CA 90802310/353-2363, 888/774-9998, FAX 310/353-2366www.spencerreed.comemail: [email protected]

SRI Technologies1250 Bank DriveSchaumburg, IL 60173847/330-1222, FAX 847/330-1411www.sritalent.comemail: [email protected]

Strom Aviation IncorporatedP.O. Box 460328Aurora, CO 80046303/740-7400, 800/377-9246, FAX 303/740-7414www.stromaviation.comemail: [email protected]

Strom Engineering Corp.Corporate Headquarters10505 Wayzata BoulevardMinnetonka, MN 55305952/544-8644, 800/205-8732, FAX 952/544-2451www.stromengineering.comemail: [email protected]

Strongfield Technologies (Quebec) Inc. (please see our display ad)2931 Rue Du Versant, Suite 3Ste Marthe Sur Le Lac, QC, J0N 1P0, Canada514/247-8837, FAX 514/253-8849www.strongfield.com, email: [email protected]

STS Engineering Solutions LLC2000 NE Jensen Beach BlvdJensen Beach, FL 34957Phone & FAX 877/707-5767www.stsengineering.comemail: [email protected]

TASC Technical ServicesP.O. Box 1315Plaistow, NH 03865603/382-1114, 877/304-8272, FAX 603/382-2377www.tasctech.comemail: [email protected]

TDM Technical Services(please see our display ad)3924 Chesswood DriveToronto, ON M3J 2W6, Canada416/777-0007, FAX 416/777-1117www.tdm.caemail: [email protected]

Technology Plus Inc.3430 McKelvey Road, Suite IBridgeton, MO 63044314/298-8887, 800/910-5554www.tplusinc.comemail: [email protected]

Technology Plus Inc.P.O. Box 439Valley Head, AL 35989256/657-7425, 800/233-3449, FAX 816/795-7752www.tplusinc.comemail: [email protected]

Tech Resources LLC537 Warren AvenueSt Louis, MO 63130314/862-2090email: [email protected]

Tech USA LLC8334 Veterans HighwayMillersville, MD 21108410/846-9020, FAX 410/729-4341www.techusa.netemail: [email protected]

TES-The Employment Solution6600 TransCanada Highway, Suite 340Pointe-Claire QC H9R 4S2, Canada514/426-0121, FAX 514/426-1790www.tes.netemail: [email protected]

The Talley Group Inc.2507 147th Place SEMill Creek, WA 98012425/753-5061, FAX 425/645-7845www.thetalleygroup.comemail: [email protected]

Total Technical Services225 Wyman Street, 1st FloorWaltham, MA 02451781/790-7900, 800/572-0753, FAX 888/887-6285www.total-tech.comemail: [email protected]

Triad Worktek(please see our display ad)23801 Calabasas Road, Suite 2022Calabasas, CA 91302818/222-6811, 800/820-6811, FAX 818/222-0116www.worktek.comemail: [email protected]

TriMech Services LLC4461 Cox Road, Suite 302Glen Allen, VA 23060804/257-9965, FAX 804/257-7945www.trimechservices.comemail: [email protected]

Two Roads Professional Resource Inc.5122 Bolsa Avenue, Suite 112Huntington Beach, CA 92649714/901-3804, 877/4-2ROADS, FAX 714/901-3814www.2roads.comemail: [email protected]

Universal Software Corporation1 Olde North Road, Suite 303Chelmsford, MA 01824-1453978/770-2200, FAX 978/221-5752www.universal-sw.comemail: [email protected]

USA-Universal Services Associates Inc.500 Ellis AvenueColwyn, PA 19023-2725610/461-0300, 800/724-6120, FAX 610/461-0405www.buildwithusa.comemail: [email protected]

Volt Services Group(please see our display ad and online banner)1002 15th Street SW, Suite 212Auburn, WA 98001-6502253/733-3060, 888/307-4243, FAX 253/838-1384www.jobs.volt.comemail: [email protected]

—additional Volt Services Group offices:

Fort Worth, TX San Diego, CAOrange, CA Wichita, KSPhoenix, AZ

Yoh Services(please see our display ad)14323 S Outer 40, Suite 484Chesterfield, MO 63017314/878-0666, 800/298-0666, FAX 314/878-3313www.jobs.yoh.comemail: [email protected]

—additional Yoh offices:

Bellevue, WA Westminster, COPhoenix, AZ

C.E. Weekly October 29, 2014 – A-3

JOBLINES – Continued from Page A-2

Assignment Contract Firm/ Per Over- Expected Expected * SeeJob Classification, Description Location Office to Contact Rate Diem time Duration Start Date Page

Electrical Systems Engineer—project/cabin systems Savannah, GA Agente/Colleyville 65-67/hr split poss LT ASAP Index

Electromechanical Engineer—aerospace/defense Irvine, CA Ingenium/Rockford 90-125K — — LT ASAP Index

Field Support Engineer—command and control Needham, MA Moseley/Huntsville — no poss 6 mos ASAP Index

Final Phase Technical Specialist—mechanical Savannah, GA Agente/Colleyville — split poss 6 mos+ ASAP Index

Flight Controls Engineer—CATIA V5/SmarTeam/flight ctrl Savannah, GA Agente/Colleyville 58-63/hr split poss LT ASAP Index

Flight Test Instrumentation Engineer Savannah, GA CTS/Bellevue 70+/hr — — 12 mos Now 4

Hardware/Software Engineer—motor controllers Rockford, IL Ingenium/Rockford 60-70K — poss 3-6 mos ASAP Index

IT Application Designer II Savannah, GA CTS/Bellevue 63+/hr — — 3 mos Now 4

Industrial Engineer—US citizen Chula Vista, CA Adecco/San Diego 65/hr no poss 6 mos+ ASAP Index

Industrial Engineer—raw materials/production processes San Diego, CA Volt/Auburn 55-65/hr — — 6 mos+ ASAP Front

Industrial Engineer—statistics/operations research Everett, WA Triad Worktek/Calabasas open poss poss LT ASAP 13

Instrumentation Designers—P&IDs/produce data sheets Birmingham, AL Tech Plus/Valley Head — split — 3 mos+ Now Index

Instrumentation Engineer—PFS/P&ID development New Orleans, LA Tech Plus/Valley Head — split — 3 mos+ — Index

Instrumentation Engineer—industrial facilites/BS degr Canton, GA Tech Plus/Valley Head — split — 6 mos — Index

Lead Cable and Vehicle Integration Engineer Taunton, MA Moseley/Huntsville — no poss 6 mos ASAP Index

Lead Power Process Engineer—chemical recovery boiler Birmingham, AL Tech Plus/Valley Head — split — — ASAP Index

Lean Transformation Analyst—liaison material logistics W Palm Bch, FL Agente/Colleyville 25-30/hr split poss LT ASAP Index

Liaison Engineer—US ctizen Northwest Agente/Colleyville — split poss LT ASAP Index

MES Controls Engineer W Palm Bch, FL Kelly/Alpharetta 35-42/hr poss yes 6 mos+ ASAP Index

Maintenance Program Engineer Seal Beach, CA CTS/Bellevue 30+/hr — — 12 mos Nov 28 4

Manufacturing Engineer Chula Vista, CA Yoh/Chesterfield 48-53/hr split poss 3 mos — 9

Manufacturing Engineer Chula Vista, CA Adecco/San Diego 53/hr no poss 3 mos ASAP Index

Manufacturing Engineer—CADAM/CATIA Savannah, GA Comforce/Bellevue open yes poss LT ASAP 8

Manufacturing Engineer—fabrication/assembly Santa Ana, CA Volt/Auburn open — — direct ASAP Front

Manufacturing Engineer—item master/BOM data Tucson, AZ Comforce/Bellevue open poss poss LT ASAP 8

Manufacturing Engineers—aerospace fluid systems Rockford, IL Ingenium/Rockford 40/hr — poss LT ASAP Index

Manufacturing Systems Engineer—power generation San Diego, CA Ingenium/Rockford — — poss 6 mos ASAP Index

Master Scheduler/Software Engineer—Primavera 6 E Hartford, CT Apollo/Glen Burnie 50+/hr split — 2 yrs Immed 9

Mastercam NC Programmer Fredonia, KS Apollo/Wildwood 50/hr yes yes 6 mos ASAP 9

Mechanical Design Engineer—aerospace products Jackson, MI Ingenium/Rockford — — — 6-12 mos ASAP Index

Mechanical Engineer Windsor Locks, CT Butler America/Shelton 48/hr split — 6 mos — 6

Mechanical Engineer—AAP final phase Savannah, GA Agente/Colleyville 65-67/hr split poss LT ASAP Index

Mechanical Engineers—pipe sizing/pressure relief New Orleans, LA Tech Plus/Valley Head — split — — — Index

Mechanical Technician—aerospace products Jackson, MI Ingenium/Rockford — — poss 3-6 mos ASAP Index

Methods Process Analyst—crew cycling/learning curve Everett, WA Triad Worktek/Calabasas open poss poss LT ASAP 13

Mid-Cabin Electrical Systems/Avionics Engineer Savannah, GA Agente/Colleyville 58-63/hr split poss LT ASAP Index

NC Programmer Hunstville, AL Apollo/Wildwood 55/hr yes yes 6 mos ASAP 9

NC Programmer—aerospace/defense Santa Clarita, CA Johnson/San Jose open poss poss 6 mos+ ASAP 12

Non-Destructive Testing Quality Technician—Oracle ERP Davenport, IA Ingenium/Rockford 25-30/hr — poss 9 mos ASAP Index

Office Administration—project management skills Tulsa, OK Foster/Wichita 17/hr no poss 3 mos+ ASAP Index

Office Administration—project management skills Tulsa, OK Foster/Wichita 15/hr no poss 3 mos ASAP Index

Operations Manager—oversee production control Santa Ana, CA Volt/Auburn open — — direct ASAP Front

Piping Designer—project and CAD exp Ponca City, OK Foster/Wichita — split poss 11 mos+ ASAP Index

Process Engineer—BS or Masters degree chemical engrg Raleigh, NC Tech Plus/Valley Head — split — — — Index

Procurement Administration—negotation/documentation Tulsa, OK Foster/Wichita 25-32/hr no poss 3 mos+ ASAP Index

Procurement Scheduler—industrial/chemical Louisville, KY Tech Plus/Valley Head — split — — ASAP Index

Product Repair/Mod Tech C—tooling assemblies New Orleans, LA Moseley/Huntsville — no poss 12 mos ASAP Index

Project Analyst Chula Vista, CA Inconen/Culver City 36+/hr split poss 2 mos ASAP 15

FF II NN DD EE RR SS KK EE EE PP EE RR SSDo you have anything to trade, rent, buy or sell? If so, let us help. If you are a current C.E. Weekly subscriber, we will publish your ad 3 times at no costto you. Please mail your ads to C.E. Publications. Sorry, this column is not for business ads. C.E. Weekly reserves the right to refuse any submittal.

For Rent: Bedroom in Shaker Heights, Ohio with private bath on a quiet street in Tudor home. All utilities, high speed internet,kitchen and laundry privileges with off-street parking. Shopping nearby with thruway accessed within 5 minutes. $400 all inclu-sive. I currently am housing my daughter’s cat who is reclusive. If interested, please email [email protected]

A-4 – October 29, 2014 C.E. Weekly

Assignment Contract Firm/ Per Over- Expected Expected * SeeJob Classification, Description Location Office to Contact Rate Diem time Duration Start Date Page

Project Manager—strong design/aerospace and defense Irvine, CA STS Engrg/Jensen Beach DOE poss poss contr-dir ASAP IndexPropulsion & Environmental Control System Designer Connecticut Agente/Colleyville — split poss LT ASAP IndexPropulsion Designer—create SES & PEPs/fuel system Connecticut Agente/Colleyville — split poss LT ASAP IndexQuality Engineer—aerospace composite structures Monrovia, CA Johnson/San Jose open poss poss LT ASAP 12Quality Engineer—manufacturing/automations W Palm Bch, FL Kelly/Alpharetta 40/hr poss yes 6 mos+ ASAP IndexQuality Engineer—material processes Santa Ana, CA Volt/Auburn open — — direct ASAP FrontQuality Inspector—parts, assemblies and finished prod Tucson, AZ Comforce/Bellevue open poss poss LT ASAP 8Scheduler—piping/mechanical/P6 Augusta, GA Tech Plus/Valley Head — split — — ASAP IndexSimulation Software Engineer Savannah, GA Inconen/Culver City 53+/hr split poss LT ASAP 15Software Engineer—C/C++/Java/Linux/MPEG El Segundo, CA Adtl Tech/Framingham 55-60/hr poss no 6 mos ASAP IndexSoftware Engineer—C/C++/Python/Linux/DO-178B Aurora, IL Adtl Tech/Framingham 55-60+hr poss no 12 mos+ ASAP IndexSoftware Engineer—motor controllers Rockford, IL Ingenium/Rockford 60-70K — poss 6 mos-dir ASAP IndexSr Advanced Quality Engineer Sarasota, FL On Assignment/Calabasas 39-45/hr split — — Nov 24 IndexSr Buyer—raw materials/equipment/tools/parts Jacksonville, FL STS Engrg/Jensen Beach DOE poss poss — ASAP IndexSr Civil/Structural Engineer—industrial pharmaceutical Ashland, KY Tech Plus/Valley Head — split — — — IndexSr Control Systems Engineer—control valves/flow meters New Orleans, LA Tech Plus/Valley Head — split — 3 mos+ — IndexSr Electrical/Electronic Development Engineer—CATIA V5 Portland, OR Idex Solutions/Portland 36-38/hr poss poss 12-18 mos ASAP IndexSr Instrumentation Engineer—refinery Ponca City, OK Foster/Wichita — poss poss VLT ASAP IndexSr Mechanical Development Engineer—chassis/NX CAD Portland, OR Idex Solutions/Portland 35-37/hr poss poss 12-18 mos ASAP IndexSr Mechanical Engineer—heavy truck cab exterior hood Portland, OR Idex Solutions/Portland 33-34/hr poss poss 12-18 mos ASAP IndexSr Project Management Specialist Phoenix, AZ On Assignment/Calabasas 37-40/hr split — 9 mos Nov 10 IndexStress Analysis Engineers St Louis, MO Amer Contract/N Andover 60+/hr split poss 6-12 mos ASAP IndexStress Engineer—Nastran/Patran/FEMAP/NXCAE San Diego, CA Volt/Auburn 52/hr split — 12 mos ASAP FrontStress Engineer—aircraft interior/system installations Texas Agente/Colleyville 55-63/hr split poss LT ASAP IndexStructural Analysis Engineers—composites El Segundo, CA Volt/Auburn 75/hr split — 12 mos ASAP FrontStructural Analysis Engineers—composites/Nastran model El Segundo, CA Volt/Auburn 75/hr split — 12 mos ASAP FrontStructural Analysis—MRB exp req/stress-fatigue checks Tulsa, OK Foster/Wichita — no poss 11 mos+ ASAP IndexStructural Analysis—modeling/static/fatigue Tulsa, OK Foster/Wichita — no poss 11 mos+ ASAP IndexStructural Design Engineer Aurora, IL Butler America/Shelton 32-42/hr split — 9 mos ASAP 6Structural Design Engineers—CATIA V5 El Segundo, CA Volt/Auburn 60/hr split — 9 mos ASAP FrontStructural Designer/Engineer—must be US citizen Tulsa, OK Foster/Wichita — poss poss 3-6 mos+ ASAP IndexStructural Engineers—AutoCAD/offshore & onshore oil New Orleans, LA Tech Plus/Valley Head — split — LT — IndexStructural Ground Test Engineer Connecticut Agente/Colleyville — split poss LT ASAP IndexStructural Stress Engineer—finite element models Washington Triad Worktek/Calabasas open split poss LT ASAP 13Structural/Mechanical Engineer—SolidWorks/AutoCAD Midwest Agente/Colleyville — split poss — ASAP IndexSubsystem/Airframe Designer—engine integration Florida Agente/Colleyville — split poss LT ASAP IndexSupply Chain Procurement—supplier management Wichita, KS Foster/Wichita 35-40/hr no poss 4 mos+ ASAP IndexSystems Engineer—network/computer system admin Goodyear, AZ STS Engrg/Jensen Beach DOE poss poss contr-dir ASAP IndexTechnical Specialist—structural/mechanical engineering Wisconsin Agente/Colleyville 50/hr split poss 6 mos+ ASAP IndexTechnical Writer—aerospace products Jackson, MI Ingenium/Rockford 40/hr — poss 6-12 mos ASAP IndexTechnical Writer—technical publications/FrameMaker Midwest Agente/Colleyville — split poss LT ASAP IndexTest Engineer—aerospace products Jackson, MI Ingenium/Rockford — — poss 3 mos ASAP IndexTest Engineers—aerospace/Six Sigma Rockford, IL Ingenium/Rockford — poss poss LT ASAP IndexTooling Engineer—design industrial machinery Stuart, FL STS Engrg/Jensen Beach DOE poss poss — ASAP IndexTrade Compliance Manager—import and export compliance Jacksonville, FL STS Engrg/Jensen Beach DOE no poss direct ASAP IndexUnmanned Aircraft Development Lead—UAV platforms Irvine, CA STS Engrg/Jensen Beach DOE poss poss contr-dir ASAP IndexV&V Engineer—flight controls Savannah, GA Precision Pers/Clearwater 58-63/hr yes yes 1 year+ ASAP IndexValue Stream Manager—strategic planning/Kaizen Santa Ana, CA Volt/Auburn open — — direct ASAP FrontVirtual Software Application Packager Raleigh, NC Chipton Ross/El Segundo to 40/hr — — 3-6 mos — 7Weights & Mass Properties Engineer—AWBS/RP7 & RP8 San Diego, CA Volt/Auburn 44-48/hr — — 12 mos ASAP Front

Anticip: Anticipated. Openings are anticipated at this time

ASAP: As soon as possible. Openings exist now

Contr-Dir: Assignment begins on contract basis and can become direct position

DOE: Depending on experience

Immed: Immediately. Openings exist now

Indef: Indefinite. Expected duration of assignment unknown; probably Long Term

LT: Long Term (expected assignment duration 6-12 months)

Negot: Rate range may have been determined, but your rate is to be negotiated

Ongoing: Client expects openings for this discipline on an ongoing basis

Open: The rate for this assignment has not yet been set

Poss: Possible (normally refers to overtime or per diem)

Prob: Probable (normally refers to overtime or per diem)

Split: Firm will split a portion of hourly rate into per diem (if you meet IRS reqmt)

ST: Short Term (expected assignment duration less than 6 months)

StTm/OT: Straight time for overtime

VLT: Very Long Term (expected assignment duration over 12 months)

ABBREVIATIONS AND TERMS


Contract Employment Weeklywww.ContractJobHunter.com

Mailing Address . . . . . . . . . . . . . . . . . .P.O. Box 3006, Bothell, WA 98041-3006

Overnight Deliveries . . .11711 N. Creek Pkwy. S., Suite 112, Bothell, WA 98011

Phone: (425) 806-5200 . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fax: (425) 806-5585

Email Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [email protected]

Publisher & Editor: Jerry Erickson • Managing Editor: Janice Erickson •Staff: Greg Erickson (Director of Operations), Scott Schultz (SystemsAdministrator), Marian Martin, and Karen Dennis

Some jobs advertised in C.E. Weekly are for upcoming or anticipated openings,or may be filled before you respond to the advertiser. Please notify us if you finda firm advertising upcoming positions as “Immediate.” For member onlineaccess, please contact our office for a UserID and Password.

Contract Employment Weekly (ISSN 1063-9268) ©Copyright 2014 C.E.Publications, Inc. Published every Wednesday. Most job openings are forshort or long term contract (temporary) assignments. There should never bea fee to apply for or accept any of the jobs published in C.E. Weekly. Direct(captive) positions advertised must meet the following criteria: (1) be for aposition with the advertiser’s client (unless it is for recruiting related staff);and (2) must be identified as “direct.” If you wish to apply for any positionadvertised, send a copy of your current resume to the advertising firm, notto C.E. Publications. C.E. Publications is not intended as a legal reference.Any specific problem should be referred to your attorney or accountant. Allmaterial submitted to C.E. Publications is subject to acceptance by the pub-lisher. Advertisers, authors and cartoonists agree to indemnify the publish-er from any claims or lawsuits for libel, violation of rights, copyright infringe-ment or other suits predicated on the content of copy submitted. No part ofthis publication may be reproduced or transmitted in any form by anymeans, electronic or mechanical, including photocopying, recording or byany information storage retrieval system, without written permission fromthe publisher. All returned checks subject to $5 handling fee. We reserve theright to refuse services to anyone. Services subject to change. Membershipmust be current to use our services. Sorry, no refunds.

Contract Employment Weekly ◆ ContractJobHunter

Last Name __________________________________________________

First Name _______________________________ Middle Initial______

Home Phone _______________________________________________

Cell Phone _________________________________________________

Address ______________________________________ Apt _________

City ____________________________ State _____ Zip ____________

Email________________________________________________________

❑ cash/check/money order❑ MasterCard/Visa/Amex Account # __ __ __ __ / __ __ __ __ / __ __ __ __ / __ __ __ __ Card Expires __ __ / __ __

Signature _________________________________________________________

RELEASE INFORMATION: If someone calls C.E. Publications and asks for me specifically by my name, I authorize you torelease the above information to: ❑ Anyone ❑ Contract Firms Only ❑ No One* (*If you specify “No One”, you will not beable to use the C.E. Locator Service or print C.E.’s address/phone number on your resume)

DO NOT WRITE IN THIS SPACE

UserID AND PASSWORD FOR ONLINE ACCESS:(Case sensitive, choose 4-14 alpha/numeric characters – no symbols)

UserID ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

Password ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

Payment may be made in U.S. dollars drawn on a U.S. bank, MasterCard,Visa or Amex, U.S. cash, or a Bank Draft from foreign bank. All issues are sent1st class or airmail. We do not bill for any services or publications. We mail thecurrent issue the same day payment is received. Consecutive issues only. Norefunds. Mail to: C.E. Publications, P.O. Box 3006, Bothell, WA 98041.

❑ 1 Year (with 52 print issues) . . . . . . . . . . . . . . . . . . . . . . . . . . .$50❑ Seniors renewal only (for seniors 62+ with proof of age) . . .$45

❑ 12 Weeks (with 12 print issues) . . . . . . . . . . . . . . . . . . . . . . . .$30

❑ Current Single Issue of C.E. Weekly . . . . . . . . . . . . . . . . . . . . .$4

All print subscriptions also include online access for full duration at ContractJobHunter.com

❑ 1 Year Online-Access Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25

Rates to Canada or Mexico addresses:❑ 1 Year (with 52 print issues) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$60

❑ 12 Weeks (with 12 print issues) . . . . . . . . . . . . . . . . . . . . . . . . . .$35

❑ Current Single Issue of C.E. Weekly . . . . . . . . . . . . . . . . . . . . . . .$5

Rates to U.S. addresses:(For Washington state add 9.5% sales tax)

Members’Message Board

Members can leave mes-sages and questions for othermembers on this board.

Discussed subjects haveincluded: Insurance for con-tractors ... overtime on fullrate ... job locations … pre-employment drug testing ...and lots of contractors look-ing for old friends.

CE Services

FIRST-CLASS MAIL

CE Publications, Inc.P.O. Box 3006Bothell, WA 98041-3006

JURISDICTION ANDJURISDICTION ANDCLASSIFICATION ANALYST (ITAR)CLASSIFICATION ANALYST (ITAR)

-- STRATFORD, CONNECTICUT ---- STRATFORD, CONNECTICUT --The primary responsibility of this role will be to perform Jurisdiction and Classification (J&C) in Sikorsky’sPLM systems in accordance with the ITAR and/or EAR of hardware, tech data, software and defensesystems. Interact daily with engineering, operations, purchasing and SAS to address J&C items.

Mandatory Skills: Must have technical/engineering experience • Must have export compliance(ITAR/EAR) experience • Must be adept in navigating through the MS Office Suite and be able to han-dle a high volume of requests efficiently to meet internal customer demands

Nice to Have Skills: Knowledge of Sikorsky’s Matrix-One, ERC Engineering Drawings and specs.Knowledge of typical business processes (i.e., procurement, proposal preparation, program manage-ment) and production support would be helpful.

PRIMARY AND SECONDARYPRIMARY AND SECONDARYSTRUCTURES DESIGN & ANALYSISSTRUCTURES DESIGN & ANALYSIS

-- MIDWEST ---- MIDWEST --UG Designers with 4-7 years experience, Stress Analysts with 7+ years experience, Nastran/Patranrequired. Active or recently inactive secret clearance required

Harry Pember at (203) 225-5705 • [email protected] Burroughs at (203) 225-5714 • [email protected]

Please

contact

Documents

Contract and Direct Openings for a top-tier Global