"I hWMMOND www.hammfg.com

1414 N4 PHSS 304 Stainless Steel JIC Enclosures - NEMA 4XContinuous Hinge, Clamped Cover

MOUNTING FOOT TYP 4 PLSEXCEPT WHERE 8=4"SEE MOUNTING FOOT DETAIL ^BODY

BRACKET

-H1.50

Side ViewFront View

a

U ———— 3.00 ———— *A _(L __ X" 1

P-P^-^Ar~ \\

r~ \ n1 ! II1 1 II

COUNTING FOOTTP 2 PLSVHEN B=4"

\•M R • • »l

Mounting DetailWhen B=4 1.50

Top View

Part No.Part No. Without Inner Panel

1414N4PHSSC4 1414N4PHSSC4LP1414N4PHSSE 1414N4PHSSELP1414N4PHSSG 1414N4PHSSGLP1414N4PHSSI 1414N4PHSSILP1414N4PHSSK 1414N4PHSSKLP1414N4PHSSL6 1414N4PHSSL6LP1414N4PHSSM6 1414N4PHSSM6LP1414N4PHSSO6 1414N4PHSSO6LP1414N4PHSSM8 1414N4PHSSM8LP1414N4PHSSO10 1414N4PHSSO10UP

A

6

68

101 2121 4

1 61 416

B

4

66

8101 212141 214

C

4.0

4.03.54.05.06.06.06.08.0

10.0

Panel SizeD E

4.884.886.758.75

10.7510.7512.75

14.7512.7514.75

2.884.884.886.888.88

10.8810.8812.8810.8812.88

MountingCentersF G

3.503.503.003.504.50

5.505.505.507.509.50

6.756.758.75

10.7512.75

12.7514.75

16.7514.7516.75

H

2

44

68

1010121012

J L

3.6 7.53.6 7.53.1 9.53.6 1 1 . 54.6 13.55.6 13.55.6 15.55.6 17.57.6 15.59.6 17.5

CoverDimensions

6.316.318.31

10.3112.3112.3614.3116.3114.3116.31

4.316.316.318.31

10.3112.3112.3114.3112 .3114.31

T

35579

1 11 1131 113

V0.31

0.310.250.250.250.250.25

0.250.250.25

Ship Wt. Ibs.With With

Y Panel Out0.560.560.63

0.630.630.630.630.630.630.63

566

101 52021262228

4

5 y59.1

1318 I1923 ir2025

-H1.5

;LAMP3 ARE 2.50

PHSSKPHSSLPHSSM

LsJ—*-\3.QQ

PHSSO

] DD

— -̂ -J1 «;

Corrosion R

esistaiJunction Boxes/JIC

Emr£

I t

ca

m

if Enclosuresclosures

1-1

2}

H

'r-

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless specified otherwise

© Hammond ManufacturingQuality Enclosures. Service Excellence.

Canada: 519.822.2960 or 905.456.3770 USA: 716.631.8281 Data Subject to change without notice79

M H>4MMONDwwww.hammfg.com

OCI'S1?

^«&8 Q.

I

1414 N4 PHSS 304 Stainless Steel JIC Enclosures - NEMA 4XContinuous Hinge, Clamped Cover

Application• Designed for use as instrument

enclosures, electric, hydraulic orpneumatic control housings,electrical junction boxes or terminalwiring enclosures.

• Provides protection whereequipment may be hosed down orotherwise be very wet, or in specificapplications where corrosion may bea problem.

Standards• UL 508 Type 3R, 4, 4X, and 12• CSATypeSR, 4, 4X, and 12• Complies with

• NEMA Type 3R, 4, 4X, 12 and 13• JIC EGP-1-1967• IEC 529, IP66

Construction* Formed from 14 gauge Type 304

stainless steel without knockouts,cutouts or holes.

* Smooth, continuously welded seams.* Welded brackets provide for

enclosure mounting.* Continuous stainless steel hinged

cover is secured with stainless steelclamps and screws.

* Oil resistant gaskets arepermanently secured.

* All models larger than 4" x 4" includea removable 14 gauge inner panel.

" Weldnuts are provided for mountinginner panels.

* A bonding stud is provided on thedoor and a grounding stud isprovided in the enclosure.

InnerPanel

Included

Finish• Cover and enclosure are natural

stainless steel with a smoothbrushed finish.

• Removable inner panel is finished inwhite powder coating.

Accessories• Additional inner panels...see page 380' Breather kits...seepage 371• Door clamping hardware...see page 374' Filter fans...see page 358-365• Heaters see page 368-369« Louvered ventilating plates...seepage 392• Terminal kit assemblies...see page 382• Thermostats...see page 371' Window kits...see page 387

Technical references and DXF downloads available at www.hammfg.com All dimensions in inches unless specified otherwise

78© Hammond Manufacturing

Quality Enclosures. Service Excellence.Canada: 519.822.2960 or 905.456.3770 USA: 716.631.8281 Data Subject to change without notice

A* H/IMMOND www.hammfg.com

Industry Definitons (NEMA Standards)

II$

I

f

Definitions Pertaining to Non-Hazardous LocationsType 1 Enclosures constructed for indoor use to provide adegree of protection to personnel against incidental contactwith the enclosed equipment, and to provide a degree ofprotection against falling dirt. NEMA 250-1997.

Type 2 Enclosures constructed for indoor use to provide adegree of protection to personnel against incidental contactwith the enclosed equipment, to provide a degree ofprotection against falling dirt, and to provide a degree ofprotection against dripping and light splashing of liquids.NEMA 250-1997.

Type 3 Enclosures constructed for either indoor or outdooruse to provide a degree of protection to personnel againstincidental contact with the enclosed equipment; to provide adegree of protection against falling dirt, rain, sleet, snow,and windblown dust; and that will be undamaged by theexternal formation of ice on the enclosure. NEMA 250-1997.

Type 3R Enclosures constructed for either indoor oroutdoor use to provide a degree of protection to personnelagainst incidental contact with the enclosed equipment; toprovide a degree of protection against falling dirt, rain, sleet,snow; and that will be undamaged by the external formationof ice on the enclosure. NEMA 250-1997.

Type 3S Enclosures constructed for either indoor or outdooruse to provide a degree of protection to personnel againstincidental contact with the enclosed equipment; to provide adegree of protection against falling dirt, rain, sleet, snow, andwindblown dust; and in which the external mechanism(s)remain operable when ice laden. NEMA 250-1997.

Type 4 Enclosures constructed for either indoor or outdooruse to provide a degree of protection to personnel againstincidental contact with the enclosed equipment; to provide adegree of protection against falling dirt, rain, sleet, snow,windblown dust, splashing water, and hose-directed water;and that will be undamaged by the external formation of iceon the enclosure. NEMA -250 1997.

Type 4X Enclosures constructed for either indoor oroutdoor use to provide a degree of protection to personnelagainst incidental contact with the enclosed equipment; toprovide a degree of protection against falling dirt, rain, sleet,snow, windblown dust, splashing water, hose-directed water;and corrosion; and that will be undamaged by the externalformation of ice on the enclosure. NEMA -250 1997.

Type 5 Enclosures constructed for indoor use to provide adegree of protection to personnel against incidental contactwith the enclosed equipment; to provide a degree of protectionagainst falling dirt; against settling airborne dust, lint, fibers,and flyings; and to provide a degree of protection againstdripping and light splashing of liquids. NEMA 250-1997.

Type 6 Enclosures constructed for either indoor or outdooruse to provide a degree of protection to personnel againstincidental contact with the enclosed equipment; to provide adegree of protection against falling dirt; against hose-directed water and the entry of water during occasionaltemporary submersion at a limited depth; and that will beundamaged by the external formation of ice on theenclosure. NEMA-250 1997.

Type 6P Enclosures constructed for either indoor or outdooruse to provide a degree of protection to personnel againstincidental contact with the enclosed equipment; to provide adegree of protection against falling dirt; against hose-directedwater and the entry of water during prolonged submersion ata limited depth;. and that will be undamaged by the externalformation of ice on the enclosure. NEMA-250 1997.

Type 12 Enclosures constructed (without knockouts) forindoor use to provide a degree of protection to personnelagainst incidental contact with the enclosed equipment; toprovide a degree of protection against falling dirt; againstcirculating dust, lint, fibers, and flyings; and against drippingand light splashing of liquids. NEMA 250-1997

Type 12K Enclosures constructed (with knockouts) forindoor use to provide a degree of protection to personnelagainst incidental contact with the enclosed equipment; toprovide a degree of protection against falling dirt; againstcirculating dust, lint, fibers, and flyings; and against drippingand light splashing of liquids. NEMA 250-1997

Type 13 Enclosures constructed for indoor use to provide adegree of protection to personnel against incidental contactwith the enclosed equipment; to provide a degree of protectionagainst falling dirt; against circulating dust, lint, fibers, andflyings; and against spraying splashing, and seepage of water,oil and noncorrosive coolants. NEMA 250-1997

Definitions Pertaining To Hazardous (Classified)LocationsType 7 Enclosures constructed for indoor use in hazardouslocations classified as Class I, Division 1, Groups A, B, C, orD, as defined in NFPA70. NEMA 250-1997

Type 8 Enclosures constructed for either indoor or outdooruse in hazardous locations classified as Class I, Division 1,Groups A, B, C, or D, as defined in NFPA70. NEMA 250-1997

Type 9 Enclosures constructed for indoor use in hazardouslocations classified as Class II, Division 1,Groups E, F, or G,as defined in NFPA70. NEMA 250-1997

Type 10 Enclosures constructed to meet the requirementsof the Mine Safety and Health Administration, 30 CFR, Part18. NEMA 250-1997. NEMA 250-1997

Technical references and DXF downloads available at vimw.hammfg.com All dimensions in inches unless specified otherwise

398© Hammond Manufacturing

Quality Enclosures. Service Excellence.Canada: 519.822.2960 or 905.456.3770 USA: 716.631.8281 Data Subject to change without notice