Embed Size (px)
Citation preview
ContinentalTM
Fork Pockets - Internal
Adding fork pockets to your ContinentalTM containers allows for the safe and easy movement of containers around large sites. For operators with heavier waste requirements and the standard use of fork lift trucks this simple enhancement can speed up waste transportation and allow for more effective waste collection points on site.
Part of
ContinentalTM Fork Pockets - Internal
Adding Internal Fork Pockets to our ContinentalTM Containers ensures easy movement of the containers around site. This versatile container can be adapted to meet your requirements. No wonder its the winner of a World Industrial Design Award.
The ContinentalTM 1100 with External Fork Pockets is EN840 compliant and will give you exceptional lifetime value with limited downtime, unlike plastic and other alternative steelcommercial trade bins.
Internally welded seams stop water penetration, preventing the corrosion that plagues less well made metal waste containers.
86
201 Min
605 Max
128
0 L
oadi
ng e
dge
122
5 L
iftin
g ba
r
1265 Handles
385
403 Centres
984
130
Continental 1100 Internal fork pockets (Narrow) Designed, built and tested to conform to EN840 standardsSee 02702 for wide forks version
See 03953 for body assySyteline: ZPHANT-SHELL-1100-INTFORKN
B
C
D
A
321 4
B
A
5 6
C
1100 Fork pockets internal [Narrow]
This drawing is confidential. The contents may not be reproduced or used without the prior written permission of Egbert H Taylor & Co Ltd
Part# File: 03951-A C1100 Fork pockets internal [Narrow] MA
Description Drawn
by JJA
General tolerance+/- 1mm
+/- 1unless otherwise stated Issue Reason for modification NP# Date
Drawing No.
Oak Park, Ryelands Lane, Elmley Lovett, Worcestershire WR9 0QZ 01299 251333
03951-A24/04/2017
D
Material/Finish: Mild Steel construction / Hot dip Galvanized to BS EN ISO 1461, optional powder coat
Continental 1100 fork pockets M/A: 03959
- -- -
03/04/172017-28New variantA
Con
tinen
talTM
Inte
rnal
For
k Po
cket
Dat
ashe
et /
UK
EN
Features• Heavy Duty Base• Rotate Emptying
Available as • Narrow Internal Fork
Pockets• Wide Internal Fork
Pockets
Also available as • External Fork
Pockets
Talk to us Email us Visit us online +44 (0)1299 251 333 [email protected] www.egberttaylor.com
Egbert H. Taylor & Co Ltd, Oak Park, Ryelands Lane, Elmley Lovett, Droitwich, Worcestershire, WR9 0QZ, UKEgbert H. Taylor & Co Ltd is a limited company registered in England and Wales. No. 00718441. Registered Office as above.
Narrow Internal Fork Pockets
86
375 Min
779 Max
128
0 L
oadi
ng e
dge
122
5 L
iftin
g ba
r
1265 Handles
385
577 Centres
984
130
Continental 1100 Internal fork pockets (Wide) Designed, built and tested to conform to EN840 standardsSee 03951 for narrow version
See 02704 for body assySyteline: ZPHANT-SHELL-1100-INTFORKW
B
C
D
A
321 4
B
A
5 6
C
1100 Fork pockets internal [Wide]
This drawing is confidential. The contents may not be reproduced or used without the prior written permission of Egbert H Taylor & Co Ltd
Part# File: 02702-B C1100 Fork pockets internal [Wide] MA
Description Drawn
by JJA
General tolerance+/- 1mm
+/- 1unless otherwise stated Issue Reason for modification NP# Date
Drawing No.
Oak Park, Ryelands Lane, Elmley Lovett, Worcestershire WR9 0QZ 01299 251333
02702-B24/04/2017
D
Material/Finish: Mild Steel construction / Hot dip Galvanized to BS EN ISO 1461, optional powder coat
Continental 1100 fork pockets M/A: 03959
- -- -
03/04/172017-28Sizes revised, new narrow variant also createdB
Wide Internal Fork Pockets
