CONTENTSbasculasybalanzassv.com/wp-content/uploads/2018/09/PR-T-User-ManualENG.pdf- Insert the post pipe into a post bracket. - Insert and fasten the display assembly screws. 9 DISPLAY

1

표지

2

CONTENTS

PRECAUTIONS ......................................................... 3

PREFACE, OVERALL VIEW ................................ 5

DISPLAY AND KEY BOARD ................................. 6

REMOVE THE SCREW .......................................... 9

COLUMN INSTALLATION ................................... 9

OPERATION

Chapter 1. Basic Operation ................................ 10

Chapter 2. PLU Saving & Calling-up ............... 13

Chapter 3. User' s Set-up Mode ......................... 15

Chapter 4. Sales transaction ............................... 17

TECHNICAL PARAMETER ................................ 19

ERROR MESSAGE ................................................. 19

3

PRECAUTIONS

4

PRECAUTIONS

5

PREFACE

Thank you for purchasing your PR-T.

CAS scales are designed and produced under rigid quality control to deliver

outstanding performance, reliability and long life.

This manual will help you with the proper operation and care of your new

PR-T.

Please review the PR-T manual before you use the scale and keep it handy

for future reference.

■ The Pb battery of product may not be fully charged. It is recommended to

charge Pb battery using AC power before initial usage.

CHANGING THE PRINTER ROLL

■ Recommended size for thermal paper;

58mm (Width) / 65 m(Thickness) / 60mm (Maximum Diameter)

6

■ It is recommended to tear off the ticket left to right.

7

OVERALL VIEW

8

■ POLE TYPE INSTALLATIONS

- Insert the post pipe into a post bracket.

- Insert and fasten the display assembly screws.

9

DISPLAY

■ Front

■ Rear

10

Table 1 : Symbols on Display

SYMBOLS DESCRIPTION

Stable Indicator

To adjust the weight to zero.

Tare on

In the subtotal mode

Discount price

To adjust the weight to zero.

AC Power On

Low battery warning when it is below residual 20 %

KEYPAD

11

■ Function keys

KEYS FUNCTIONS

SALES MODE PROGRAM MODE

~ To input all numerical data

To input double zero

To clear all of numbers input on the display

To set zero

To set or clear tare value

To go to program mode

To call up a PLU with numeric key

To input non-weighed item

SHIFT : To select alternate key functions

To show subtotal / total / payment sum

~

Direct PLU keys * PLUs # 1~30 may be used for both

the direct and indirect PLUs. Most commonly used 30 items are recommended to be used for

direct PLUs for users' convenience.

Alphabet Key(A~Z key)

To change key map

12

REMOVE THE SCREW

Remove the crew

NOTICE：Make sure to remove the screw before use at the first time.

COLUMN INSTALLATION

Column Installation

13

14

2. PROGRAMMING Program Mode Menu Tree

Sale

PLU

Inventory

Tax

Tare

Delete

PLU

Tax

Tare

All

Print

Print list PLU list

Tax list

Tare list

Print Report

PLU report

Tax Report

Monthly Report

Weekly Report

Hourly Report

Print Total Report

Delete Report

Total Report

Monthly Report

Weekly Report

Hourly Report

All Report

Scale Settings

DATE/TIME

Use PLU tare

Use inventory

Suspend

Define speed key Set

Reset

Printer Set

Header/Footer Message

Settings

Image Print Use Image Print

Test Image

Line feed

Print PLU details after Make PLU

Print bill

Print intensity

Barcode

Use PLU Barcode

PLU Barcode format

Use Total Barcode

Total Barcode format

Test

AD

Display

Key

Printer

Battery

Memory

15

Rs232

2.1 SALE Programming

2.1.1 Create/Edit PLU You can set 8 items for a PLU as below table and if you do not want to use some items

No Item Description

1 PLU No PLU No. 1 to 300

2 PLU Type Select PLU type among By Weight, By Count

3 (Unit) Price This value can be from 1 to 999999.

4 Item Code Item Code can be from 0 to 99999.(optional)

5 Tax No. Enter tax index number. This value can be from 0 to9(optional)

6 Tare No.* Enter tare index number. This value can be from 0 to9 (optional, only By-weight PLU)

7 Inventory (optional)

8 Name Enter name 1 of item. Maximum 32 characters. (optional)

* These items are shown on the display when you select By Weight PLU.

16

Sample Create/Edit PLU Operation

Operation Key Display

Remark Weight Unit Total

MENU [MENU] Enter Menu

Sale Menu

[*] Enter Sale Menu

PLU menu

[*] Enter PLU menu

PLU no. [0] [*]

Enter PLU No.

PLU type [1] [0] [*]

.

Press [0] or [1] Key can change PLU type Weight to Non-weight.

PLU Unit Price

[1][2][5][0] [*]

.

Input unit price. (Critical Item Must be not 0)

PLU Itemcode

[2][0][3][4] [*]

Input Item-code for Barcode(optional)

PLU NAME

[A/PLU01] [P/PLU16] [P/PLU16] [L/PLU12] [E/PLU05]

[*]

When create a PLU, PLU name is filled with space(32) Enter the PLU name by Alphabet key

PLU TAX [1] [2] [*]

.

.

Input tax index No.(optional) #1 4.00% exclude #2 5.00% include

PLU TARE

[1] [2] [*]

.

.

.

Input tare index No.(optional)*

PLU Inventory

[1][0][0][0] .Input PLU inventory (optional)**

PLU menu [*]

Move back to SALE menu

*) Settings:USE PLUTare가 NO일 경우 보이지 않음

**) Settings:USE Inventory가 NO일 경우 보이지 않음

17

18

2.1.2 Edit Inventory

설명 추가할 것

Sample Edit Inventory Operation




Sale Menu [*] Enter Sale Menu

Inventory menu

[VOID/→] [*]

Enter Inventory menu*

Input PLU No.

[1] [*]

.Enter PLU No.**

Edit Inventory

value [5][0][0][0] . Input inventory value

Tax Menu [*] Move back to SALE menu

*)Parameter: USE Inventory가 NO일 경우 Dontuse 라고 표시됨

**) if PLU doesm’t exist, Display “PLU empty”

19

2.1.3 Create Tax

설명 추가 : exclude, include SAMPLE Create/Edit Tax Operation





Tax menu [VOID/→] [VOID/→]

[*]

Enter Tax menu

Tax No. [1] [*]

.Enter tax No.

Tax value Tax Type

[1][0][0][0] [VOID/→]

.

.

Input Tax value Press [VOID/→], [ADD]/[ ←] key to change tax type (‘I’ include/’E’ excluse)

Tax Menu [*] Move back to SALE menu

2.1.4 Create PLU Tare index

SAMPLE Create/Edit Tare Operation

Operation Key (e.g)

Display Remark

Weight Unit Total



Tare menu

[VOID/→] [VOID/→] [VOID/→]

[*]

Enter Tare menu

Tare No. [1] [*]

.Enter Tare No.

Tare weight

[3][0][0][0] [*]

. Input Tare weight

Tare Menu Move back to SALE menu

Parameter: USE PLU TARE가 NO일 Dontuse 라고 표시

20

2.1.5 Delete sale items

SAMPLE Delete sale item Operation

Operation Key (e.g)

Display Remark

Weight Unit Total


Sale Menu

[*] Enter Sale Menu

Delete item

menu

[VOID/→] [VOID/→] [VOID/→] [VOID/→]

[*]

Enter delete item menu Press [VOID/→], [ADD]/[ ←] key to change items

1. PLU 2. Tax 3. Tare 4. All

[*]

Delete item start

[1][0] [*]

Input start PLU number to delete PLU list

Delete item list

No. [2][2]

Input end PLU number to delete PLU list

Delete item

[*] Move back to Sale menu

2.2 List & Report 2.2.1 Print list

Operation Key (e.g)

Display Remark

Weight Unit Total


Print Menu

[VOID/→] [*]

Enter Print Menu

Print list menu

[*]

Select items 1. PLU 2. Tax 3. Tare(*)

Select Print item

no

[5] [*]

[2][0][0]

Input start item number to print list Input end item number to print list

Print Item list

[*] Print item list completely, Move back to Print menu

21

(*) Parameter: USE PLU TARE가 NO일 경우 보이지 않음

22

2.2.2 Print Report

Operation Key (e.g)

Display Remark

Weight Unit Total


Print Menu

[VOID/→] [*]

Enter Print Menu

Select report menu

[VOID/→] [*]

Select items 1. PLU 2. Tax 3. Hourly 4. Weekly 5. Monthly

Print report

[*] [VOID/→]

Print Report : yes

[*]

Print item report completely Move back to Print menu

2.2.3 Print Total Report

Operation Key (e.g)

Display Remark

Weight Unit Total


Print Menu

[VOID/→] [*]

Enter Print Menu

Select report menu

[VOID/→] [VOID/→]

[*]

Print total report list

Print total report

[*] Move back to Print menu

Parameter: Total Report에 같이 출력되는 Report가 있는 경우

Clear할 때 같이 클리어 된다.

23

2.3 Set 2.3.1 DATE/TIME

Operation Key (e.g)

Display Remark

Weight Unit Total


Set Menu [VOID/→] [VOID/→]

[*]

Enter Set Menu

Set Date

[*] [1][3] [0][6] [1][2]

[*]

..

..

..

..

..

..

..

..

..

..

Edit Date YY/MM/DD Press [*] key to accept

Set Time [1][7] [2][0] [0][0]

..

..

..

..

..

..

Edit Time HH/MM/SS Press [*] key to accept

[*] Set date/time. Move back to set menu

2.3.2 Use PLU Tare

Operation Key (e.g)

Display Remark

Weight Unit Total

ㅖㅇㄹ [MENU] Enter Menu


[*]

Enter Set Menu

enter Use Tare Index

menu

[VOID/→] [*]

Enter Use Tare Index Menu (Default: off)

Set Use Tare Index

[VOID/→] [ADD]/[ ←]

Set Use Tare Index

[*] Set Use Tare index Move back to set menu

Use Tare Index – When this Settings set off, can’t Use tare index in PLU programming.

24

2.3.3 Use Inventory

Operation Key (e.g)

Display Remark

Weight Unit Total



[*]

Enter Set Menu

enter Use Tare Index

menu


[*]

Enter Use Inventory Menu (default :off)

Set Use Tare Index

[VOID/→] [ADD]/[ ←]

Set Use inventory

[*] Set Use inventory. Move back to set menu

Use Inventory – When this Settings set off, can’t Use inventory in PLU programming. 2.3.4 Suspend display

설명 필요

Operation Key (e.g)

Display Remark

Weight Unit Total



[*]

Enter Set Menu

enter power save menu


[*]

Enter power save Menu (default :20 seconds) Off,20,40,60 sec

Set power save


Set suspend display time

[*] Set suspend display Move back to set menu

25

2.4 Printer Setting

2.4.1 Header/Footer Message Programming

Operation Key (e.g)

Display Remark

Weight Unit Total


Printer Set Menu


[*]

Enter Printer Set Menu

Printer Set Menu

[*] Enter header Set Menu

Select header

[3] [ADD]/[ ←]

[*]

Select header 1: header 1 2: header 2 3: header 3 4: footer

Set header

[6][7] [VOID/→]

[6][5] [VOID/→]

[8][3]

Set header. When create a header that filled with space(32) Enter the header by referring ASCII codes. Press [VOID/→] key to move forward. Press [ADD]/[ ←]key to move backward. Press [C]key to clear one character Press [*] key to save header Only 32-126 ASCII code are acceptable.

[*]

Press [*] key to accept Set header completely, display ‘done’ with beep Move back to printer setting menu

26

2.4.2 Header/Footer Setting Programming

Operation Key (e.g)

Display Remark

Weight Unit Total


Printer Set Menu


[*]


Printer Set Menu

[*] Enter header Set Menu

Select header

[3] [ADD]/[ ←]

[*]

Select header 1: header 1 2: header 2 3: header 3 4: footer

Set header

[6][7] [VOID/→]

[6][5] [VOID/→]

[8][3]

Set header. When create a header that filled with space(32) Enter the header by referring ASCII codes. Press [VOID/→] key to move forward. Press [ADD]/[ ←]key to move backward. Press [C]key to clear one character Press [*] key to save header Only 32-126 ASCII code are acceptable.

[*]

Press [*] key to accept Set header completely, display ‘done’ with beep Move back to printer setting menu

27

2.4.3 Image Use

Operation Key (e.g)

Display Remark

Weight Unit Total


Printer Set Menu


[*]


Printer Set Menu

[VOID/→] [*]

Enter Image Print Menu

Print Test Image

[*] Ask Print test image

[*]

Press [*] key to accept print test image completely, display ‘done’ with beep Move back to printer setting menu

Note: Use image print 가 off 일 경우 보이지 않음

2.4.4 Image Test

Operation Key (e.g)

Display Remark

Weight Unit Total


Printer Set Menu


[*]


Printer Set Menu

[VOID/→] [*]

Enter Image Print Menu

Print Test Image

[*] Ask Print test image

[*]

Press [*] key to accept print test image completely, display ‘done’ with beep Move back to printer setting menu

Note: Use image print 가 off 일 경우 보이지 않음

28

2.4.5 Line feed

Operation Key (e.g)

Display Remark

Weight Unit Total


Printer Set Menu


[*]


Printer Set Menu


[*]

Enter line feed Menu

Set line feed

[5] Set Line Feed

[*]

Press [*] key to accept Set line feed completely, display ‘done’ with beep Move back to printer setting menu

2.4.6 Print PLU details after prgramming

Operation Key (e.g)

Display Remark

Weight Unit Total


Printer Set Menu


[*]


Printer Set Menu


[*]

Enter print PLU details Menu

Set line feed

[VOID/→] Set Print PLU

[*]

Press [*] key to accept Set print PLU completely, display ‘done’ with beep Move back to printer setting menu

29

2.4.7 Print bill

Operation Key (e.g)

Display Remark

Weight Unit Total


Printer Set Menu


[*]


Printer Set Menu

[VOID/→] [VOID/→] [VOID/→] [VOID/→]

[*]

Enter print bill Menu (default : on) Off : don’t print bill

Set line feed

[VOID/→] Set Print bill

[*]

Press [*] key to accept Set print bill completely, display ‘done’ with beep Move back to printer setting menu

2.4.8 Print intensity

Operation Key (e.g)

Display Remark

Weight Unit Total


Printer Set Menu


[*]


Printer Set Menu

[VOID/→] [VOID/→] [VOID/→] [VOID/→] [VOID/→]

[*]


Set line feed

[1][5] Set print intensity

[*]

Press [*] key to accept Set print intensity completely, display ‘done’ with beep Move back to printer setting menu

30

2.4.9 duplicate bill

Operation Key (e.g)

Display Remark

Weight Unit Total


Printer Set Menu


[*]


Printer Set Menu

[VOID/→] [VOID/→] [VOID/→] [VOID/→] [VOID/→] [VOID/→]

[*]


Set line feed

[VOID/→] Set print intensity

[*]

Press [*] key to accept Set print intensity completely, display ‘done’ with beep Move back to printer setting menu

31

ERROR MESSAGES

Table 18 : Error Messages

Error Message on Display

Description Solution

CHECK PAPER Problem with ticket paper roll Please check paper

- - - - - Overloaded

Please remove the item from the platter and put only appropriately weighed item(s) on the platter

Price Over When total price exceeds 99999.99 this message is displayed with beep

Please input appropriate number within maximum capacity on the display.

Weight Over When weight exceeds max capacity is displayed with beep

Please remove the weight on the tray.

Weight Minus When weight below zero displayed with beep

Please check the weight on the tray.

CAL ERROR

When turning on the scale this message may be displayed with continuous beep and it is automatically turned off.

Please call your CAS dealer.

INIT ERROR

Please remove the item from the platter and put only appropriately weighed item(s) on the platter.

Error Message on Receipt

Description Solution

CLOCK IS NOT SET This error may happen in case of low backup battery or some hardware error!

Please call your CAS dealer when there is still error after setting DATE & TIME in MENU -> SET2.

ERROR POSSIBLE RAM DATA ARE CORRUPTED! RESETING ALL RAM DATA.. PLEASE RESTART THE SCALE

This message is printed when the control sums of RAM is not correct. In such case the processor clears the RAM automatically. And all of sums, settings and PLU are deleted!

Please call your CAS dealer

32

SPECIFICATION

Table 19 : SPECIFICATION

Model PR-T

CAPACITY 6 kg 15 kg 32 kg

Division, e= 1 g 2 g 5 g

Minimum weight ※ 20 g 40 g 100 g

DISPLAY Alpha-numeric LCD 7/7/7 (Weight / Unit Price / Total price)

PRINTER INFO.

Thermal printer - 32 Characters per line Printing Speed : Max 75 mm/sec Recommended size for thermal paper;

58mm (Width) / 65μm(Thickness) / 60mm (Maximum Diameter)

PRINTER RELIABILITY

HEAD PULSE- RESISTANCE

100,000,000 pulses or more

HEAD WEAR- RESISTANCE

50km or more

PLU MEMORY CAPACITY 30 Direct PLUs, 270 Indirect PLUs, 2 Special PLUs

POWER AC 230V, 50 ~ 60Hz

OPERATING TEMPERATURE -0℃ ~ +40℃

EXTERNAL UTILITIES Default: RS232C

POWER CONSUMPTION Maximum 35W

BATTERY LIFE

■ Rechargeable Battery (inside): 12V 2.6Ah (Pb) ■ Battery life (continuous usage)

• Weighing Mode only: 240mA, 28 hrs • With backlight: 260mA, 26 hrs • With printer: 1800mA, 4 hrs

PRODUCT SIZE (mm) B Type : 342(W) X455(D) X 152(H) P Type : 342(W) X455(D) X 413(H) R Type : 342(W) X455(D) X 488(H)

PRODUCT WEIGHT Standard type : 6.8 kg Pole type : 8 kg R type : 8.5 kg

※ Minimum weight to make a sale transaction

▶ Notice: specifications are subject to change for improvement without notice.

33

MEMO

34

MEMO

35

Documents

CONTENTSbasculasybalanzassv.com/wp-content/uploads/2018/09/PR-T-User-ManualENG.pdf- Insert the post pipe into a post bracket. - Insert and fasten the display assembly screws. 9 DISPLAY