3
DESCRIPTION OF PRODUCTS 143 we will attempt to supply the proper device by mail. The following information must be when requesting a lens: 1. Name of patient and diagnosis 2. A short clinical history and specific purpose for the lens 3. Good quality color slides of the patient's full face, two eyes only, and each eye separately 4. Keratometry readings from the good eye and, when possible, from the damaged eye 5. Corneal diameter 6. Refractive error, if any, converted 7. Pupillary size in millimeters of the good eye in average room light 8. Results of trial lens fitting with any conventionally available soft contact lens (eg . Bausch & Lomb, Hydrocurve, American Hydron, Cooper) 9. Any other information you think is appropriate Research and development at the Foundation is funded solely by the directors, appreciative patients, and friends . The demand for our lenses is increasing, and newer processes require more sophisticated equipment and increased personnel. To enable us to continue our work on these very important devices, we ask that a donation accompany each request for a lens. Price: Donation requested of $175 per lens adjusted in accordance to patient's financial status One-month warranty Contact Lens Accessories AO American Optical'Corporation Care Products Business SEPTICON™ Catalytic Disinfection System The SEPTICON System is an oxidation disinfection regimen for use with all soft (hydrophilic) contact lenses. The system contains 4 oz. LENSEPT™ Solution, SEPTICON™ System cups, #1 (LENSEPT) and #2 (RINSE), AODISC™ Replacement, 4 oz. saline solution, lens cleaner, lens lubricant and patient booklet. LENSEPT™ Disinfection Solution The LENSEPT Solution is a sterile opthalmic solution for use in the SEPTICOWM System for the disinfection of all soft (hydrophilic) contact lenses. The LENSEPT Solution contains microfiltered hydrogen peroxide 3% stabilized with sodium stannate sodium nitrate, buffered with phosphates . SEPTICON™ Replacement Lens Cups The SEPTICON Replacement lens cups are specially designed cups for use with the SEPTICON™ Catalytic Disinfection System. Contains #1 LENSEPT™ cup and #2 RINSE cup . Disinfect for 10 minutes in #1 cup with LENSEPT Solution. Soak in #2 cup with a non - thimerosal saline solution for a minimum of 6 hours. AOSEPT™ Catalytic Disinfection System The AOSEPT System is a one-step oxidation disinfection regimen for use with soft (hydrophilic) contact lenses. The system contains 4-oz. AOSEPT™ Disinfection and Neutralization/Storage Solution, AOSEPT™ Lens Holder and Cup, AODISC™ Replacement, daily cleaner, non-thimerasol saline, and instruction booklet. AOSEPT™ Disinfect jon and Neutralization/Storage Solution The AOSEPT Solution is a sterile, ophthalmic solution for use in the AOSEPT Catalytic Disinfection System to disinfect and neutnilize/store soft (hydrophilic) contact lenses. The AOSEPT Solution contains microfiltered hydrogen peroxide 3%, sodium chloride 0. 85% stabilized with sodium stannate, sodium nitrate, buffered with phosphates. AOSEPT™ Lens Holder and Cup The AOSEPT Lens Holder and Cup is for use only with the AOSEPT System. AOSEPT Solution is neutralized in the AOSEPT Lens Holder and Cup with the AODISC in the base. The top of the Lens Holder has a specially designed micron filter which releases oxygen from the neutralized peroxide solution. AODISe™ Replacement The AODISC is a specially designed, platinum coated disc for use in both the SEPT1CON and AOSEPT Systems. The AODISC neutralizes the microfiltered hydrogen peroxide component of the LENSEPTTM and AOSEPT Solutions. The AODISC should be replaced every 100 uses (extended wear) or every three months of daily use. AOSOAp™ AOSOAP is a mild , liquid soap specifically formulated to remove oily residue and other contaminants from hands before handling, cleaning, and insertion of contact lenses. AOSOAP contains amphoteric surfactants in an aqueous solution, 0.2% triclosan. It does not contain fragrances or other cosmetic ingredients. Leaves no residue which may contaminate lenses. BPI Brain Power Incorporated The 3,4 gallon Super Scrubber Product #7500 (Optional 12-vial C. L. Rack, $69 , Product #67800) Most powerful Multi-phasic™ Ultrasonic Scrubber made; dual axes power projection ensures no standing waves for fastest, most thorough cleaning of contact lenses; even removes calcium deposits ; large enough for instruments, etC. 115 v. Price $495 The Personal Ultrasonic Cleaner Product #9100 (Optional 2-vial C. L. Rack, $14.95-Product #6600) Projects ultrasonic power in a 360 0 configuration because of its design; can be used with the optional C. L. Rack for personal contact lens care, or with a 600 ml beaker rack for larger items, such as frames and lenses. Requires 115 volts. Price $119 BPI® High-Power Scrubber™ (gallon), #18400 Multi-phasic™ action for random-sized bubbles for no standing waves

Contact Lens Accessories

Embed Size (px)

Citation preview

DESCRIPTION OF PRODUCTS 143

we will attempt to supply the proper device by mail. The following information must be includ~d when requesting a lens: 1. Name of patient and diagnosis 2. A short clinical history and specific purpose for the

lens 3. Good quality color slides of the patient's full face,

two eyes only, and each eye separately 4. Keratometry readings from the good eye and, when

possible, from the damaged eye 5. Corneal diameter 6. Refractive error, if any, converted 7. Pupillary size in millimeters of the good eye in

average room light 8. Results of trial lens fitting with any conventionally

available soft contact lens (eg. Bausch & Lomb, Hydrocurve, American Hydron, Cooper)

9. Any other information you think is appropriate Research and development at the Foundation is funded

solely by the directors, appreciative patients, and friends. The demand for our lenses is increasing, and newer processes require more sophisticated equipment and increased personnel. To enable us to continue our work on these very important devices, we ask that a donation accompany each request for a lens.

Price: Donation requested of $175 per lens adjusted in accordance to patient's financial status

One-month warranty

Contact Lens Accessories

AO American Optical'Corporation Care Products Business SEPTICON™ Catalytic Disinfection System

The SEPTICON System is an oxidation disinfection regimen for use with all soft (hydrophilic) contact lenses. The system contains 4 oz. LENSEPT™ Solution, SEPTICON™ System cups, #1 (LENSEPT) and #2 (RINSE), AODISC™ Replacement, 4 oz. saline solution, lens cleaner, lens lubricant and patient booklet.

LENSEPT™ Disinfection Solution The LENSEPT Solution is a sterile opthalmic solution for

use in the SEPTICOWM System for the disinfection of all soft (hydrophilic) contact lenses. The LENSEPT Solution contains microfiltered hydrogen peroxide 3% stabilized with sodium stannate sodium nitrate, buffered with phosphates.

SEPTICON™ Replacement Lens Cups The SEPTICON Replacement lens cups are specially

designed cups for use with the SEPTICON™ Catalytic Disinfection System. Contains #1 LENSEPT™ cup and #2 RINSE cup. Disinfect for 10 minutes in #1 cup with LENSEPT Solution. Soak in #2 cup with a non­thimerosal saline solution for a minimum of 6 hours.

AOSEPT™ Catalytic Disinfection System The AOSEPT System is a one-step oxidation disinfection

regimen for use with soft (hydrophilic) contact lenses. The system contains 4-oz. AOSEPT™ Disinfection and Neutralization/Storage Solution, AOSEPT™ Lens Holder and Cup, AODISC™ Replacement, daily cleaner, non-thimerasol saline, and instruction booklet.

AOSEPT™ Disinfect jon and Neutralization/Storage Solution The AOSEPT Solution is a sterile, ophthalmic solution for

use in the AOSEPT Catalytic Disinfection System to disinfect and neutnilize/store soft (hydrophilic) contact lenses. The AOSEPT Solution contains microfiltered hydrogen peroxide 3%, sodium chloride 0.85% stabilized with sodium stannate, sodium nitrate, buffered with phosphates.

AOSEPT™ Lens Holder and Cup The AOSEPT Lens Holder and Cup is for use only with

the AOSEPT System. AOSEPT Solution is neutralized in the AOSEPT Lens Holder and Cup with the AODISC in the base. The top of the Lens Holder has a specially designed micron filter which releases oxygen from the neutralized peroxide solution.

AODISe™ Replacement The AODISC is a specially designed, platinum coated

disc for use in both the SEPT1CON and AOSEPT Systems. The AODISC neutralizes the microfiltered hydrogen peroxide component of the LENSEPTTM and AOSEPT Solutions. The AODISC should be replaced every 100 uses (extended wear) or every three months of daily use.

AOSOAp™ AOSOAP is a mild, liquid soap specifically formulated to

remove oily residue and other contaminants from hands before handling, cleaning, and insertion of contact lenses. AOSOAP contains amphoteric surfactants in an aqueous solution, 0.2% triclosan. It does not contain fragrances or other cosmetic ingredients. Leaves no residue which may contaminate lenses.

BPI Brain Power Incorporated The 3,4 gallon Super Scrubber Product #7500

(Optional 12-vial C. L. Rack, $69, Product #67800) Most powerful Multi-phasic™ Ultrasonic Scrubber made; dual axes power projection ensures no standing waves for fastest, most thorough cleaning of contact lenses; even removes calcium deposits; large enough for instruments, etC. 115 v.

Price $495 The Personal Ultrasonic Cleaner Product #9100

(Optional 2-vial C. L. Rack, $14.95-Product #6600) Projects ultrasonic power in a 360 0 configuration because of its design; can be used with the optional C. L. Rack for personal contact lens care, or with a 600 ml beaker rack for larger items, such as frames and lenses. Requires 115 volts.

Price $119 BPI® High-Power Scrubber™ (gallon), #18400

Multi-phasic™ action for random-sized bubbles for no standing waves

144 OPHTHALMOLOGY • INSTRUMENT AND BOOK SUPPLEMENT 1985

250 watts of true sonic power to cleaning solution Multi-frequency response Dual power selection, horizontal or vertical or both Available in two chassis styles; protectively coated

aluminum or all stainless steel and has gallon-sized stainless steel tank

CCS and UL approved; fuse protected Price $449 standard 115 volt Thirty-day mOriey-back guarantee with one-year limited

warranty. BPI® Half-Gallon Scrubber™ with timer, #18500

Features exclusive Multi-phasic ™ multi-frequency ultrasonic power pulses for thorough cleaning

Dual axis cleaning Horizontal or vertical projection of ultrasonic waves or a

combination of both Perfect for instruments; 115 volt Price $279

BPI® 3 Tank Ultrasonic Scrubber™, #18600 Has three Scrubbers ™ in one compact unit Exclusive BPI Multi-phasic™ action Variable frequency; dual-axis power selection CCS and UL listed components are fuse protected 18.5" wide, 10.5" front to back, 6" high Quart tanks are stainless steel. For higher volume needs or varied chemical application Price $795 Thirty-day money-back guarantee; limited one-year

warranty

BPI Multi-phasic™ Quart Ultrasonic Scrubber Cleans and polishes all contact lenses, even fragile

extended-wear lenses; removes yellowing due to lipomucoprotein and calcium deposits without tearing. Polishes away minimal scratches from hard contacts

Outside dimensions: 8" W x 6" D x 6" H Tank dimensions: 3.5" x 6" x 4" D; quart capacity A unique ultrasonic system using exclusive Multi-

phasic™ power pulses giving a random-sized bubble with no standing waves; Dual power projection; can use either horizontal or vertical axes or combine the two for most effective cleaning

Model #17900 has a stainless steel tank with protectively coated aluminum chassis

Price $249 Model #17000 with stainless steel chassis Price $279 Both have dual axis switching for power mode selection

and UL, CCS listed, fuse-protected components Thirty-day money-back guarantee with one-year limited

warranty C. L. Rack™, #66200

Designed for use in the BPI Quart Scrubber™ Holds eight sealed vials (included) for cleaning and

polishing four pairs of contact lenses Can be used with all contacts No contamination cleaning as lenses never touch base

ftuid Stainless steel rack designed for maximum resonance to

contact lenses (Extra vials available)

Price $39.50 Thirty-day money-back guarantee with one-year limited

warranty Mini-Quart Immersion Tray, #66500

Designed for use in DPI Quart Scrubber™ Stainless steel rack is perforated to permit a maximum

amount of power to items being cleaned or polished Price $29 Thirty-day money-back guarantee with one-year limited

warranty Half-Gallon Immersion Tray #66600

Stainless steel tray with 2 perforated shelves, top shelf is removable. Fits half-gallon Scrubber and larger systems.

Price $49 3A Gallon Beaker Rack #67100

Holds 2 600-ml. beakers. Beakers are 6" tall, 3" dia. Price $69

3f.I Gallon Immersion Tray #67300 Single perforated shelf, for Super Scrubber. Price $69

Gallon Immersion Tray #66700 For gallon Scrubber, two perforated shelves, top shelf is

removable. Price $69

Captain Medical Supplies LensoClean Ultrasonic Contact Lens Cleaner

Captain Medical Supplies offers a personal ultrasonic cleaning system designed for patient use in the home. This unit includes both an ultrasonic cleaning and a low heat disinfecting tank to provide a complete lens care regime without the use of any harsh chemicals or enzymes. In addition, the unit is guaranteed by Captain Medical Supplies to effectively eliminate all problems with protein, lipid and calcium deposits on extended wear lenses. The compact unit operates using any saline based solution, and is fully automatic in operation. Low voltage within the unit facilitates safe use by patients around sinks in the home.

The ultrasonic cleaning action is accomplished using compreSSion waves with a frequency of 33,000 Hertz (cycles per second). The container is shaped to prevent the formation of standing waves, thus eliminating risk of damaged or torn lenses due to nodal shear planes. The ultrasonic Cleaning cycle cleans a pair of lenses in ten minutes, and will not damage the lenses in any way, even with repeated cleanings.

The heat disinfecting tank operates at 80 degrees centigrade, using a 17 minute heating cycle to disinfect daily wear soft lenses; Both the ultrasonic tank and the heating tank hold 9 ml. of solution for economical operation.

The LensoClean ultrasonic cleaning system comes with a 15 day trial period guarantee of satisfaction, a 1 year warranty against mechanical defects, and an effectiveness guarantee that regular use of the unit will prevent deposits forming on extended wear lenses. The unit has a suggested retail price of $150, and is

DESCRIPTION OF PRODUCTS 145

available to eye care professionals at discounts of up to 45% off the retail price. The quantity one price to eye care professionals is $112. The company adds a six dollar per unit shipping and handling fee to all orders.

International Ophthalmic Industries Corporation FOCUS Contact Lens Fitting Mirror

Aphakic patient aid. Mirror has special, patented curvature that permits patient to achieve clear image without natural lens or other optical device. Allows installation and removal of contact lens by patient simply, easily and safely.

Price $30 to the profession Warranty 90 days Distributed nationally by International Ophthalmic

Industries Corporation

Isell Systems, Inc. CLCC

Contact lens fitting and training table. Plexiglass table with mirror, stainless steel rinse tray, solution compartment, and tissue dispenser. Table adjusts to height of patient. Seating for patient and technician provided.

Literature available Price $495 to $595

CLCC Contact lens cabinet drawers will hold 450 vials, pull-out

sterilizer shelf. Storage compartment. Available with or without stainless steel sink, single lever faucet and soap dispenser. Built-in waste drop.

Literature available Price $645 to $695

L&R Manufacturing Company PC5

The PC5 is an ultrasonic cleaning system for gentle or vigorous cleaning of optical items. A quiet, powerful cleaning system, the PC5 provides DUAL ACTION cavitation, allowing you to choose vertical and/or horizontal cavitation-perfect for cleaning delicate eyeglass frames, hinges, lenses and everything associated with optics.

For gentle cleaning use only single action cleaning. . for intricate hard-to-clean objects, switch on the dual power for instant results. The PC5 is also ideal for cleaning contact lenses using the L&R contact lens holder.

The PC5 and specially formulated cleaning solutions provide quiet, efficient cleaning. The tank measures 6" x 3%" X 4Va" deep and has a 2~ pint capacity, large enough to accommodate men's eyeglass frames. The 136 watts peak output and overall dimensions of 6%" Lx 4%" W x 6%" H makes the compact PC5 the ideal chairside or tabletop ultrasonic cleaning system.

Soft-Sert, Inc. Contact lens applicator

Finger mounted, available in three sizes

Size 12 for soft lenses from 12.5 mm to 14 mm in diameter

Price $36/dozen plus postage and handling Size 14 for soft lenses exceeding 14 mm in diameter Size 8 for hard, gas permeable, and silicone lenses Price $17.50 for six-pack plus postage and handling

Soft-Sert Plus Soft lens remover/applicator Reverse action removal insures complete safety Good for aphake, hyperope, ultra thin lens wearer, long

fingernails, or anyone experiencing difficulty handling lenses

Price $21 for six-pack plus postage and handling

Van Iderstine Designs, Inc. The Van Iderstine LENSVENTORyTM Contact Lens Organizer Cabinet allows the physician to view and secure their entire inventory of contact lenses in one convenient location. Because the cabinet's sliding doors and interior structures are 100% clear plexiglass, existing labels on front bottles can be read directly, facilitating location of specific bottles.

Additional features of the cabinet include: Very space efficient:

Can be easily hung on wall, or placed on table against wall.

Clear plexiglass sliding doors do not travel beyond cabinet sides, which allows it to be placed between or next to other equipment, if desired.

Very compact: The LENSVENTORyTM Cabinet is approximately 38"w

x 30"h x 5.6"d and holds up to 864 bottles. The smaller LENSVENTORyTM Cabinette II is

approximately 19"w x 20"h x 5.6"d and holds up to 240 lens bottles.

Both size cabinets are available with clear plexiglass back and sides or, optional white plexiglass back and sides (the sliding doors and interior structures remain clear in both).

Unique design allows bottles to "come forward" when a front bottle is removed.

Clear plexiglass doors are designed to permit easy access to all bottles, yet lock securely with permanently fastened chrome lock.

Specially designed hard contact lens case holder organizes and displays hard contact inventory in cabinet.

Dispenses drop bottles as well as lens bottles. There is a LENSVENTORY Cabinet model available for

intra-ocular lenses. It allows easy access, viewing and organization of all lenses while in original packaging.

Brochure and price on request.

Contrast Sensitivity Testing

American Optical Corporation/Contact Lens Business Contrast Sensitivity System

An easy-to-use screening device for the early detection of disorders often missed by routine acuity tests. Developed from the original Arden Plates, the Contrast