Upload
lyhanh
View
232
Download
0
Embed Size (px)
Citation preview
Construction Services - LaboratoryNavi Mumbai & Delhi-NCR
Bureau Veritas has set up state of the art Construction Materials Testing Laboratories at Navi Mumbai & Delhi-NCR. These Laboratories are set up in line with requirements of ISO 17025 and offers following services:
»»»»
› ›
Physical & Chemical Testing of Construction Materials
Concrete Mix Design Services
Job Mix Formula for Road Works
In-Lab and Field Testing Services related to:
Geotechnical Investigations
Non-destructive Testing for Concrete & Steel Structural Members
1. Testing of construction materials: (For both physical & chemical properties)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Steel products: Reinforcing steel, structural steel, prestressing steel, epoxy coated bars, galvanised bars, pipes, splice joints, welded joints, roofing sheets, chain links, barbed wire, bolts etc.
Cement and cementitious materials: All types of cements (OPC, PPC, PSC, SRPC), pulverised fuel ash (flyash), ground granulated blast furnace slag (GGBS), silica fume, metakaoline, rice husk ash, building lime etc.
Concrete products: Concrete cubes/beams/blocks (hollow & solid), paver blocks, kerb stones, flag stones, medians, concrete manhole cover, concrete pipes, drain cover slabs, precast wall panels, gypsum boards etc.
Aggregates: Coarse and fine aggregates for concrete, sand-suitability for plastering, masonry and filter media purposes, manufactured sand and aggregates for road constructions
Water: For suitability for construction purpose
Chemical admixtures: All types of chemical admixtures for use in cement concrete
Flooring materials: Mozaic tiles, ceramic tiles, vitrified tiles, clay tiles, false flooring tiles, acid resisting tiles etc.
Building blocks: Clay bricks such as modular/moulded bricks, wire cut bricks, hollow clay blocks, soil-cement blocks, concrete hollow and solid blocks, flyash bricks, light weight aerated concrete blocks, cellular blocks
Wood products: Flush door shutters, composite doors, plywood, MDF boards, marine plywood etc.
Bituminous products: Bitumen, industrial bitumen, polymer modified bitumen (PMB), crumb rubber modified bitumen (CRMB), emulsions, mastic asphalt etc.
Roofing materials: Clay/cement roofing tiles, metal roofing sheets, asbestos roofing sheets, bamboo roofing sheets
Water proofing materials: Integral cement water proofer, waterproofing membranes such as bitumen felts, tarfelt, APP membranes etc.
Curing compounds: Wax based as well as resin based
Expansion joints: bitumen pads, sealants (resins, polysulphide and bituminous etc.)
Aluminium: Physical properties including coating thickness (anodic coating)
Grouts: Cementitious, epoxy, resin based grouts
Bonding epoxy: For precast segmental construction as per FIP standards
Soil: For classification and suitability for constructions purpose
Pipe: Steel pipes, concrete pipes, MS tubes, PVC pipes, HDPE pipes etc.
2. Concrete mix design services:
•
•
•
•
•
•
•
•
•
3. Job mix formula for road works:•
•
•
4. Non-destructive testing of RC & steel structures•
•
•
•
•
•
•
•
5. Geotechnical services•
•
•
•
•
•
Proportioning of cement concrete mixes for:
Normal concrete grades upto M 55
High strength and high performance concretes above M 55 grade
Self-compacting concrete
Fiber reinforced concrete
Light weight concrete and heavy density concrete
Dry lean concrete (DLC) and pavement quality concrete (PQC)
Concrete mix based flexural strength
High volume flyash concrete
Concrete mix for hollow and solid blocks
Granular sub base (GSB)
Wet mix macadam (WMM)
BM, DBM, SDBC, BC
Assessment of strength/quality of in-situ concrete throughnon-destructive tests
Assessment of cover thickness and disposition of peripheral reinforcement through rebar locator studies
Assessment of quality/strength of in-situ concrete through core tests and pullout tests (semi-destructive tests)
Assessment of termeability of concrete through field permeability tests and rapid chloride permeability tests
Assessment of onset & extent of corrosion in rebars through potential difference and resistivity studies
Assessment of extent of carbonation/chloride penetration in cover concrete
Assessment of member thickness & lamination in structural steel sections
Assessment of quality of weld in fabricated steel structures through DPT
Investigation by drilling bore holes, conducting field tests in the boreholes, collecting soil samples, carrying out laboratory tests and furnishing report with recommendations for suitable foundation system
Conducting field tests such as plate load test and electrical resistivity test
Facilities to conduct low strain and high strain pile testing for pile integrity and safe load evaluation
Conducting tests for compaction and quality control of earth works, CBR tests on sub grades
Designing foundation systems & retaining structures, study of structures subjected to settlement / foundation failure and suggesting remedial measures
Designing ground improvement techniques in weak soil conditions
www.bureauveritas.co.in
Bureau Veritas is a world leader in Conformity Assessment and Certification Services. Created in 1828, the Group has more than 50,000 employees in 930 offices and 330 laboratories located in 140 countries. Bureau Veritas helps its clients to improve their performances by offering services and innovative solutions in order to ensure that their assets, products, infrastructures and processes meet standards and regulations in terms of Quality, Health and Safety, Environmental protection and Social Responsibility.
Bureau Veritas in India started operations in 1973. Today Bureau Veritas has over 4000 employees located across the country in 90 offices and 40 laboratories.
Marwah Centre, 6th Floor, K. Marwah MargOff Saki Vihar Road, Andheri (East)Mumbai - 400 072. INDIATel.: +91 22 6695 6300Fax: +91 22 6695 6304/[email protected]
Corporate Office:
CIVIL-AID Technoclinic Pvt. Ltd. - A Bureau Veritas Group Company is a well known name and Leading player in Civil & Structural Services including Laboratory Services for Construction.
Construction Services:••••••••
•
Geotechnical Investigation & Foundation DesignStructural Designs & Consultancy ServicesProof Checking & Advisory ServicesStructural Soundness & Evaluation of old and new structuresInvestigation for Restoration & Rehabilitation of StructuresNon-destructive Testing of RC/Steel Structures & Special TestsQuality Control/Quality Audit of ConstructionsImparting Training in Structural Analysis, Design and DraftingSoftwares & latest Development in Civil EngineeringHSE Services
NABL Accredited Lab Services:
• Laboratory & Field Testing of Building Material/Components including Special Tests (NDT, Geotechnical, Mechanical & Chemical)
CIVIL-AID Technoclinic Pvt. Ltd.1030, 13th Cross, Banashankari 2nd Stage, Attimabbe Road, Bangalore - 560 070
Tel.: +91 80 39950500 • Fax : +91 80 2671 6833 • [email protected]
(Labs at Bangalore and Hyderabad)
AHMEDABAD
CHENNAI
DELHI
HYDERABAD
KOLKATA
MUMBAI
-
- Tel.: +91 44 4226 [email protected]
- Tel.: +91 120 4507600 [email protected]
- Tel.: +91 40 4908 [email protected]
- Tel.: +91 33 2226 [email protected]
- Tel.: +91 22 6695 [email protected]
Tel.: +91 79 [email protected]
Regional Offices:
Bureau Veritas (India) Pvt. Ltd.
Plot No. B3/B4, TTC Inds. Area, Opp. SandozOff Thane Belapur Road, M.I.D.C., DighaNavi Mumbai - 400 708. MaharashtraTel.: +91 22 67859100 / 66956300Fax: +91 22 67859199Email: [email protected]
Construction Services - Laboratory
CT
C/S
2/C
c-M
Bureau Veritas (India) Pvt. Ltd.
F-4, Sector 3Behind Sector 16 Metro StationNear Rajanigandha ChowkNoida - 201 301. U.P.Tel.: +91 120 4108889 / 4507600Fax: +91 120 4507650Email: [email protected]
Construction Services - Laboratory
Navi Mumbai Lab: Delhi-NCR Lab:
‹ ›Show Map
‹ ›Show Map