Connector Strips - Strand Lighting · 2016-06-10 · Based on our proven R21 Powered Raceway ... Management sensors installed will report load status and ... 76969 Circuit Breaker,

Features● 16-gauge steel strip finished in a textured black-powder coat finish

• Standard connectors include Stage Pin, Twist-Lock® and Edison in flush or pigtail mounting versions

• Our "Z-Fold Tiered Packaging" is designed to accommodate the use of palette jacks and forklifts to transport the connector strip from our factory to your job site. This unique shipment method also assures that your connector strip arrives at your project site scratch and dent free.

• "Z-Fold Tiered Packaging" allows us to deliver a completely fabricated pre-wired connector strip. The installing contractor unfolds the connector strip from the Z-Fold Tier and installs prethreaded splicing kits between each section, and connects the field wiring to the Power Connect Connector Strip terminal box.

• A wide variety of hangers for pipe mount and wall mount applications are available

• 2 Inch high standard vinyl labels standard on one side. Two sided and lamicoid labels are available as an option

• Circuits may be wired to multiple outlets on the connector strip

• Wired with high temperature wire to DIN rail mounted screw terminal blocks

• Pigtail connectors provided with strain-relief bushings

• ETL and cETL listed and labeled

• Custom lengths and configurations are available

Strand Circuit Distribution Systems

Power Connect Connector Strip

Connector Strips

SPECIFICATION SUBMITTAL

CONSULTANT: PROJECT NAME:

DATE: PROJECT NUMBER:

MODEL NUMBER | QUANTITY:

APPROVED BY:

Power Connect Connector Strips from Strand Lighting are designed to provide an electrical distribution system for connecting portable luminaires to your lighting system by placing permanent lighting circuits within your facility.

Based on our proven R21 Powered Raceway dimmer design, Power Connect Connector Strips can be supplied with a variety of flush mounted or pigtail connectors, and can be mounted either horizontally or vertically.

Ordering InformationCat No. Description

96700-XXXX Power Connect Connector Strip

(Note, “-XXXX” is part of your custom part number)

Brackets

71444 Single Pipe Overhung Hanger Bracket71440 Single Pipe Rigged Hanger Bracket71443 Double Pipe Offset Hanger Bracket71441 Double Pipe Rigged Hanger Bracket71445 Threaded Rod Bracket71442 Wall Mount Hanger Bracket

Clamps / Cradles

95550 Cable Clamp95551 Cable Cradle, Small95501 Cable Cradle, Large

Grid Iron Boxes

97051 Grid Iron Junction Box – 16 Terminals97052 Grid Iron Junction Box – 30 Terminals97053 Grid Iron Junction Box – 40 Terminals97054 Grid Iron Junction Box – 60 Terminals97055 Grid Iron Junction Box – 72 Terminals97056 Grid Iron Junction Box – 100 Terminals

021213NA

Connector Strips Strand Circuit Distribution SystemsGrid Iron Junction Box

KellumsStrain Relief

KellumsSupport Grip

SO Multi Cable

Cable Cradle

Cable Clamp Pigtail Connector Flush Mount Connector

Lighting Fixture Pipe (by others)

Terminal BoxPower Connect Connector Strip Mounting

Bracket

Rigging System (by others)

Philips Strand Lighting

Dallas New York www.strandlighting.com 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2013Dallas, TX 75238 New York, NY 10016 All rights reserved.Tel: +1 (214) 647-7880 Tel: +1 (212) 213-8219 The Company reserves the rightFax: +1 (214) 647-8031 Fax: +1 (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE

Auckland Asia Europe19-21 Kawana Street Unit C, 14/F, European Service & Distribution CentreNorthcote, Auckland 0627 Roxy Industrial Centre Rondweg zuid 85New Zealand No. 41-49 Kwai Cheong Road Winterswijk 7102 JDTel: + 64 9 481 0100 Kwai Chung, N.T., Hong Kong the Netherlands Fax: + 64 9 481 0101 Tel: +852 2796 9786 Tel: +31 (0) 543-542516 Fax: +852 2798 6545

Note, sample system diagram for illustrative purposes only. Some items shown are by others and not available through or provided by Strand Lighting.

Features● Recessed or surface-mount relay panel

● Individually fed branch circuits or 3-Phase MLO power options

• cCSAus Listed

• Space for 12, 24, 36 or 48 relay poles per enclosure

• Single and Double pole relays rated for 20 amps 120, 230, 277, and 347 volts

• Vision.net control station support

• DMX512 Input

• Optional ShowNet Ethernet

• Astronomical clock

• Active Power Management is an available option on all Contact relay panels with integral circuit breakers

• Local control of all relays

• Password protected LCD screen and pushbuttons makes easy system configuration, or configure via your personal computer

• Master - Slave operation one rack processor can run up to 96 relays or dimmers

• Cabinets may be linked to A21 dimmer racks to provide a fully integrated solution

• Barriers available for systems fed from breaker panels to allow for 120/277 volt feeds





APPROVED BY:

Strand Lighting Controls

Contact Relay Panel

Relay PanelsContact Relay Panels come in four panel sizes for 12, 24, 36 and 48 relay variants. Contact Relay Panels are ideal for a wide range of control and energy management applications.

The system’s integrated clock provides full astronomical time control for hundreds of events with full day-of-the-week and calendar scheduling. The integrated flash warn feature provides visual warning of any timeclock control action.

Contact is easy to set up and configure with a simple walkaround interface for connecting control stations to relays, as well as a computer-based configurator for advanced installations.

Strand Lighting ControlsRelay Panels

12 Circuit Relay Panel 24 Circuit Relay Panel

36 Circuit Relay Panel 48 Circuit Relay Panel

14.38 in.

0.18 in.

4.00 in.

High Voltage Access Panel

Low Voltage Access Panel

Control Panel

0.18 in.

20.9 in.


Low Voltage Access Panel

Control Panel

0.18 in.

4.00 in.

22.00 in.

23.50 in.

21.90 in.21.50 in.


Low Voltage Access Panel Control Panel

22.00 in.

23.50 in.

0.18 in.

4.00 in.

0.18 in.

34.80 in.


Low Voltage Access Panel Control Panel

0.18 in.

0.18 in.

4.00 in.

23.50 in.

22.00 in.

34.80 in.

Strand Lighting Active Power Management Technology

Contact Relay panels with integral breakers support Active Power Management technology. Relays with Active Power Management sensors installed will report load status and may have a maximum load set on a per relay basis in one amp increments. Active Power Management can be installed in blocks of four relays.

Active Power Management allows designers to securely set limits on circuits to meet watts per square foot requirement on track l ight ing and other c i rcui ts to meet energy conservation codes. Once a circuit has a load limit set at commiss ion ing the l imi t cannot be changed. Load monitoring and status reporting is also a standard feature of Act ive Power Management a l lowing a fac i l i ty to dynamically monitor and adjust lighting loads.

Strand Lighting Controls

Main feed to relay panels Micro Circuit

Breaker Panels

Lighting Control without Active Power Management

Lighting Control without Active Power Management

2-Wire Branch Circuit Terminations

Contact Relay Panels 72Micro Circuit Cabinets 144Track Lighting 72

Total Terminations 288Contact Relay Panels

Main feed to relay panels

Lighting Control with Active Power Management

Lighting Control with Active Power Management

2-Wire Branch Circuit Terminations

Contact Relay Panels 72Track Lighting 72

Total Terminations 144Contact Relay Panels

Vision.net Stations and Sensors

Relay Panels

Connecting Contact to our popular range of Vision.net controls will allow system

designers to create and operate easy-to-use lighting systems that fully integrate local

control with occupancy sensors and photo cells.



Dallas New York www.strandlighting.com 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2011Dallas, Texas 75238 New York, NY 10016 All rights reserved.Tel: (214) 647-7880 Tel: (212) 213-8219 The Company reserves the rightFax: (214) 647-8031 Fax: (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE

Auckland Asia Europe19-21 Kawana Street Room 6-10, European Service & Distribution CentreNorthcote, Auckland 0627 20/F Delta House Marssteden 152New Zealand 3 On Yiu Street Enschede 7547 TDTel: + 64 9 481 0100 Shatin, N.T. Hong Kong the Netherlands Fax: + 64 9 481 0101 Tel: + 852-2757-3033 Tel: +31-53-4500424 Fax: + 852-2757-1767 Fax: +31-53-4500425

Contact Relay Panels

Contact Relay Panels - individually fed (1), (3)

76910 Relay Insert Panel, 12-circuit76911 Relay Insert Panel, 24-circuit76912 Relay Insert Panel, 36-circuit76913 Relay Insert Panel, 48-circuit

Contact Relay Panel Power Modules with 3-phase input and breakers for 120 volt power supplies (1), (2), (3)

76921C Relay Insert Panel with Breakers, 24-way76922C Relay Insert Panel with Breakers, 36-way76923C Relay Insert Panel with Breakers, 42-way

Contact Relay Panel Power Modules with 3-phase input and breakers for 277 volt power supplies (1), (2), (3)

76931C Relay Insert Panel with Breakers, 24-way76932C Relay Insert Panel with Breakers, 36-way76933C Relay Insert Panel with Breakers, 42-way

Contact Relay Panel Enclosures

CONBOX-1 Enclosure for use with 76910 insertCONBOX-2 Enclosure for use with 76911 insertCONBOX-3 Enclosure for use with 76912 / 76913 / 76921C / 76931C insertsCONBOX-4 Enclosure for use with 76922C / 76923C / 76932C / 76933C inserts

Contact Relay Panel Options

Control Options

76960 Master Control Option76961 Auxiliary Control Option (operates with a master panel)74161 Ethernet Control Module76924 UL 924 Kit76990 Barrier Kit

Relay Options

76991 Relay, 1-pole76992 Relay, 2-pole (occupies two slots)

377V Power Supply Option

76952 277/347V Power Supply for control electronics

Circuit Breaker Options

76966 Circuit Breaker, 1-pole, 20A, 120V76967 Circuit Breaker, 2-pole, 20A, 120V76969 Circuit Breaker, 1-pole, 20A, 277V

Notes: (1) When ordering, specify control options and relay types (number of 1 pole or 2 pole). Note, 2-pole relays occupy (and count as) two relay slots. (2) Panels with circuit breakers come with 3-phase mains lugs for power input. (3) Panel inserts only. When ordering, specify relay panel enclosure. See Contact Relay Panel Enclosures for required enclosure type.

061711NA

Strand Lighting ControlsRelay Panels

Contact Relay Panel

Vision.net 4 is a fully integrated suite of architectural lighting controls designed to meet the needs of the most demanding customers. Scalable from a single room to large mult i- building campuses our decentral ized control approach delivers maximum reliability and flexibility.

Designed to integrate with all of our dimming systems, low voltage switching cabinets and DMX drivers Vision.net 4 can control any lighting load with intuitive precision.

Strand Architectural Controls

Vision.net 4 7-Inch Color Touchscreen





APPROVED BY:

Features● Next generation scalable architectural control from a single room to a multi-building campus

● Scales from a single space up to 255 rooms in a single system. Systems may be linked to build a system with up to 1000 systems each with 255 rooms

● Distributed intelligence - no central processor required

● Available with push button, slider and touchscreen panels

● Simple computer-based set up and configuration with Vision.net 4 designer software

● Fully scalable to over 1,000 stations

● Occupancy sensors and photocells available

● Designers can easily create rooms, room combinations and easily define stations and buttons

● Vision.net 4 designer provides a simple graphical set up and configuration system for original set up and updates as the needs of a facility changes

● Low-cost Cat 5e wiring

● Touchscreen systems provide connectivity to PaletteOS consoles and dimmer racks for system access and monitoring

● Smart jacks allow portable stations to be customized for each room. One portable can be used in multiple spaces each with a unique configuration.

● 127 channels per room

● Unlimited dimmers per room with patching and DMX512 snapshot support

● 255 stations per system

● Astronomical time-clock and calendar-based events

● Connects to C21, EC21, A21, R21 and Contact systems

● Vision.net 4 to DMX512 module available for DMX512 controlled devices

Vision.net 4 Touchscreen Features● Full-color touchscreens available in a range of screen sizes

● Screens may be easily configured and set up with Vision.net 4 Designer software with USB, serial data, and Ethernet interfaces

● Using our optional ShowNet Ethernet connectivity touchscreens can provide remote access to Strand Lighting Rack Palette, Palette, and Light Palette control consoles, C21, EC21 A21, and R21 dimming systems

● Touchscreens provide system astronomical time-clock and calendar functions

● Portable touchscreens available

● Fully graphical-room combine supported

● A variety of backgrounds and button styles are available to create dynamic easy to use screens

● Wide range of on-screen button and fader options

● Multi-language text support is available along with a large selection of icons allow users to label and inform users

● Web browser available for all network-based stations

● Screen support is available from a variety of clock displays and a stop watch timer for theatrical applications


Vision.net 4 Touchscreen

Touchscreen Set-up Slider/Button View

8'

10'

12'

20'

25'

30'

Field of View: Occupancy Sensor (63059CM)

12'

18'

24'

25'

45'

60'

Field of View: Occupancy Sensor (63059HB) 63063 IR Sensor Programming Remote Transmitter

Vision.net 4 Occupancy Sensors

Vision.net 4 occupancy sensors and photocells provide dynamic lighting control for your facility. Choose from two ceiling-mount occupancy sensors to meet the specific needs of your system. Photocell stations provide a choice of lumen maintenance and daylight harvesting. All settings and features of Vision.net 4 occupancy sensors and photocells are easily programmed - from the ground without the use of ladders - using the IR Sensor Programming remote.


Vision.net 4 Control Station Features● All station buttons and faders are fully programmable

● All stations include integrated processors and may operate as stand-alone systems

● Station set up and configuration is simple

● Configuration software can upload and download station set-up data

● Commands include (but are not limited to):

- Raise/lower

- Preset

- Toggle on/off

- Smart commands allow multiple system commands to be executed from a single button press

- Commands to PaletteOS consoles

● All keypads feature programmable backlighting

● Custom-configurable button and slider stations

● IR Remote port

● Optional IR Remote Transmitter with four-room, four-scene control, master raise/lower, and all on/off

● Available in five standard colors:

Vision.net 4 stations provide a wide range of button and slider stations. Any button can be programmed with a wide range of functions.

Button stations allow for custom engraving and are backlit to show what scene is active.

White Ivory Brown Black Gray

Vision.net 4 Designer● Windows-based configuration software

● Simple point and click operation

● Easy download and upload of station configuration data to an entire system from a single access point

● Built in design tools and system simulators allow users to fully test and simulate their systems

● Drag and drop touchscreen setup


Vision.net 4 Designer set-up screen.

System outputs may be simulated so that you can easily test your design and configuration.

Web browser available for all network-based stations.

Optional remote access to Strand control consoles via ethernet.

Strand Architectural ControlsOrdering InformationCat No. Description

Vision.net 4 Control Stations

Touchscreen Stations

95242A Vision.net 4 7-inch color VGA touchscreen station, light almond*95242B Vision.net 4 7-inch color VGA touchscreen station, black*95242P Vision.net 4 7-inch color VGA touchscreen station, portable in Hammond Case95242SE Vision.net 4 7-inch color VGA touchscreen station, flush, locking enclosure, black95242RM Vision.net 4 7-inch color VGA touchscreen station, rack mount, black

95246RM Vision.net 4 15-inch color VGA touchscreen station, rack mount95246SE Vision.net 4 15-inch color VGA touchscreen station, rack mount, with locking enclosure

* Note, these items require one of the following back boxes:

95243 Vision.net 4 7-inch flush mount back box kit for 95242A or 95242B95244 Vision.net 4 7-inch surface mount back box kit for 95242B

Pre-populated Standard Stations

63303 Vision.net 4 slider station with IR, 3 channel & master, 6 presets, 2-gang63306 Vision.net 4 slider station with IR, 6 channel & master, 6 presets, 3-gang63309 Vision.net 4 slider station with IR, 9 channel & master, 6 presets, 4-gang63321 Vision.net 4 push button station, 1 button, 1-gang63312 Vision.net 4 slider station, 12 channel & master, 7 presets, 5-gang63315 Vision.net 4 slider station, 15 channel & master, 7 presets, 5-gang

Custom Stations

63398 Custom Vision.net 4 station63322 Vision.net 4 push button station, 2 button, 1-gang63324 Vision.net 4 push button station with IR, 4 button, 1-gang63328 Vision.net 4 push button station with IR, 8 button, 1-gangNotes:To make any station portable, add "P" to the part number.IR = Integrated Infrared ReceiverColor Suffix: -White, -Ivory, -Brown, -Black, -Gray

Vision.net 4 stations may be custom configured for your facility by indicating the number of buttons or sliders that are required in each gang position.

Module 1 (1st Gang)Button or Slider

12345678

1234

Module 2 (2nd Gang)Button or Slider

12345678

1234

Module 3 (3rd Gang)Button or Slider

12345678

1234

Module 4 (4th Gang)Button or Slider

12345678

1234



Dallas New York www.strandlighting.com 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2012Dallas, TX 75238 New York, NY 10016 All rights reserved.Tel: (214) 647-7880 Tel: (212) 213-8219 The Company reserves the rightFax: (214) 647-8031 Fax: (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE

Auckland Asia Europe19-21 Kawana Street Unit C, 14/F, European Service & Distribution CentreNorthcote, Auckland 0627 Roxy Industrial Centre Marssteden 152New Zealand No. 41-49 Kwai Cheong Road Enschede 7547 TDTel: + 64 9 481 0100 Kwai Chung, N.T., Hong Kong the Netherlands Fax: + 64 9 481 0101 Tel: +852-2796-9786 Tel: +31-53-4500424 Fax: +852-2798-6545 Fax: +31-53-4500425

030612NA_EUA


Accessories

Occupancy Sensors and Photocells

63059CM Ceiling-mount occupancy sensor63059HB High bay-mount occupancy sensor63060CM Ceiling-mount photocell63063 Remote programmer for occupancy sensors and photocells63065SE AV input/occupancy sensor interface

Vision.net 4 Portable Extension Cables

Note: All table top stations include one 25 ft. cable

95095 Vision.net 4 Portable Extension Cable, 10FT (3M), (A4M-A4F) 95096 Vision.net 4 Portable Extension Cable, 25FT (8M), (A4M-A4F) 95097 Vision.net 4 Portable Extension Cable, 50FT (16M), (A4M-A4F)

Receptacle Stations

63341 Vision.net 4 Smart Jack receptacle, 1 gang*63035 Vision.net 4 RS232 programming station*

* Includes stainless steel faceplate with insert

Vision.net 4 DMX Interface

63054 Vision.net 4 to DMX512 interface

Vision.net 4 Data Cable Splitter

63055RM Vision.net 4 4 way data cable splitter for panel mounting63055SE Vision.net 4 4 way data cable splitter with enclosure

Vision.net 4 Configuration Software

67518 Windows configuration software on CD-ROM

PaletteVL Lighting Control Console with 64 Submasters

Features● 16 or 64 Submaster models with Unlimited Submaster Pages

● Two DMX ports with 1,024 outputs

● Integrated Moving Light Controls with integrated trackball, and 4 rotary encoder wheels

● Hard disk for show file storage

● USB key for external show file storage

● Strand ShowNet standard on all systems with over 18,000 DMX outputs

● Microsoft Windows Operating System

● High-resolution Graphical User Interface with mouse

● Unlimited cues, groups, subs and effects per show

● Network support for a wide range of Ethernet data protocols including ShowNet, streaming ACN, ArtNet, Pathway and Color Kinetics networks

● PaletteOS's Universal Attribute Control - Automated lighting control with the intelligent fixture library

● Up to 26 part cues

● Tracking, Cue Only or Preset operation

● Low profile "easy touch" bump buttons

● Light Palette-style encoder wheel

● Support for two video displays (touchscreen optional)

● Wired and wireless focus remote options

● Windows Off-line Editor

● Available with up to 8,000 channels

● Split memory playback

● 25 Button Array for Group / Palette Selection

● Unlimited effects playbacks

● Vision.net control interface for seamless interface between Entertainment and Architectural controls

Strand Control Systems





APPROVED BY:

PaletteVL Lighting Control Console

PaletteVLThere’s so much that’s new with Palette VL. And so much that you already know. The Palette VL family of consoles bridge between the clean simple operation of our regular Palette consoles with the control and sophistication of our larger Light Palette VL consoles.

Now you can have the power of conventional and moving light control in a value priced system. Palette VL features an integral trackball, moving light encoders and direct action attribute keys to extend the power of the Palette family of consoles. Available with 500 to 8,000 channels, the new consoles now offer an optional second video display to present more information to console operators, including an advanced moving light control screen.

Strand Control SystemsPaletteVL Lighting Control Console

Strand’s new Palette VL consoles build on the most successful lighting control operating system to bring you PaletteOS, a high resolution point/click graphic environment to unleash your creativity and speed up workflow. At its core, PaletteOS is all about real world control with simple direct operation to record cues and set levels, coupled with an intuitive approach to moving light control. Colors quickly match to the color filters you know, gobos rotate in RPM not DMX values and our displays deliver real information that you need all the time. Available in two models one with 16 submasters and one with 64 submasters, there is a Palette VL to meet your needs.

Palette has a powerful web browser that lets you configure and monitor your network and interact directly with Strand’s award-winning C21 dimming systems. Right there on the console

screen. And if one screen is not enough, the PaletteVL comes standard with two video connections.

And Palette is an elegant and highly functional lighting console, leveraging industry-standard technologies to make it robust and future-safe. Palette’s brain is a rugged industrial PC that could be swapped in seconds if you ever needed to. Palette has a generous hard drive, or you can save your shows anywhere on the network. You even get a shiny new USB key for show storage.

Oh, and you can even read your existing Strand 300 and 500 series console show files, bringing new life to your repertory of productions.

Introduction



Power Input ProcessorDMX512 Out (XLR-5M)

Power Input ProcessorDMX512 Out (XLR-5M)



120312NA_EA


PaletteVL Consoles*

92811-NC Palette VL16 – 16 submaster Console - No Channels92811 Palette VL16 – 500 Channel, 16 submaster Console92812 Palette VL16 – 1000 Channel, 16 submaster Console92813 Palette VL16 – 1500 Channel, 16 submaster Console92814-NC Palette VL64 – 64 submaster Console - No Channels92814 Palette VL64 – 500 Channel, 64 submaster Console92815 Palette VL64 – 1000 Channel, 64 submaster Console92816 Palette VL64 – 1500 Channel, 64 submaster Console

Includes: *All consoles include Palette keyboard, mouse, dust cover, USB key, power cord and printed installation guide. Monitors not included.

Peripheral Equipment - Software

67509 50 Additional Channels with a NEW Console Purchase67510 50 Additional Channels for an EXISTING Console

Peripheral Equipment - Cables

95090 DMX-512 Control Cable 25’ (A5F to A5M)96456 Ethernet cable 10’ 10/100BaseT (RJ-45)96459 Ethernet cable 25’ 10/100BaseT (RJ-45)

Accessories

66216 Palette Keyboard (additional)67528 USB Key Drive (additional)95220 20-inch Flat Panel Monitor95712 17-inch Touch Screen Flat Panel Monitor

Pocket Palette Wireless Kits

66149 Pocket Palette Networked Kit (includes remote, controller switch, and (2) access ports66150 Pocket Palette Standalone Kit (includes remote and wireless access point)

Technical Specifications

Electrical

Supply Voltage: Universal power supply 90-240V

Approvals: ETL listed and CE marked

Mechanical

Construction: Galvanized sheet steel and aluminum extrusion and Flame retardant ABS controls

Operating Temperature: 0° to 40°C ambient (32° to 104°F)

Humidity: 5% - 95% non-condensing

Storage Temperature: -40° to 70°C (-40° to 158°F)

Weights:

92811/92812/92813: 26.8 lbs (12.2 kg) 92814/92815/92816: 46.0 lbs (20.9 kg)

Dimensions (LxWxH): 92811/92812/92813: 25.3 x 18.2 x 4.3 in. 642.6 x 462.3 x 109.3mm 92814/92815/92816: 39.1 x 18.2 x 4.3 in. 993.1 x 462.3 x 109.3mm

Connectivity

1 Ethernet (RJ45) port, Strand ShowNet compatible

2 USB ports (rear)

1 USB port (front)

2 VGA monitor outputs (monitors not included)

1 Serial port

2 DMX512 (XLR5) ports

Ordering InformationCat. No. Description




Features• Compact and cost-effective ShowNet DMX512 nodes

• Fast 40 Hz DMX512 update rate

• DMX512 ports may be custom configured with any 512 DMX512 addresses for complete system flexibility

• One port may be configured to support Vision.net control input to ShowNet networking

• 10/100BT Ethernet operation

• Integral LCD display provides node and port labeling

• Portable node fits standard two-gang back boxes

• Local screen selector provides node status and configuration information

• 1U rack mount nodes available with 4 DMX512 ports

• N21 ShowNet nodes are available in portable, wall mount and 1U rack mount variants

• Surface mount and pipe mount versions available

• Adjustable backlight levels for dark applications

• Fully compliant with IEEE802.3af power over Ethernet

• Dimmer status reporting link available on any port for legacy dimming systems

• N21 ShowNet Nodes may be configured with a standard web browser

• Each node may be configured using any Pocket Palette wireless remote

• 32-bit processor standard with Linux O/S

• Compatible with all N21 ShowNet nodes and control systems

Strand Lighting Control Systems

ShowNet NodesDMX512 Networking Nodes





APPROVED BY:

Compact and flexible, the N21 ShowNet Node provides cost-effective network connectivity for facilities of all sizes. Each node features two or four DMX512 connectors that may be dynamically configured for input or output operation.

Based on a 32-bit ARM processor, all N21 nodes utilize the Linux operating systems for stable 10/100BT operation.

Nodes may be configured with any web browser. Node status, Node ID, and DMX512 port identification are available on the integral LCD display. The display features adjustable back lighting.

All Strand Lighting N21 ShowNet nodes feature advanced DMX512 patching, permitting any range of 512 numbers to be selected for each DMX512 port. Priority patching with up to three levels of priority assignments is available.

N21 ShowNet Rack Mount Node

N21 ShowNet Portable Node

Strand Lighting Control SystemsShowNet DMX512 Nodes

4.5 in114.3 mm

4.625 in117.5 mm

3.625 in92.1 mm

Back Box(by others)

4.5 in114.3 mm

4.625 in117.5 mm

3.5 in88.9 mm

2-Gang Back Box(by others)

4.5 in114.3 mm

4.625 in117.5 mm

3.625 in92.1 mm

Surface Mount Box

NOTE: Drawings are not to scale.

1.72 in / 43.64 mm

19.00 in / 482.60 mm 6.50 in / 165.10 mm

AC to DC Power Supply(included with unit)

REAR VIEW

FRONT VIEW SIDE VIEW

65151 N21 ShowNet Node, 2-Port, POE, 2-gang 65152 N21 ShowNet Node, 2-Port, POE, SN110 Retrofit

65153 N21 ShowNet Node, 2-Port, POE, with Surface Mount Box

65154 N21 ShowNet Node, 4-Port, 1U Rack Mount Enclosure with AC Adapter

65153P N21 ShowNet Node, 2-Port, POE, with portable mount back box, C-Clamp and U-Bolt Hardware

2-inchU-Bolt

NOTE: 65153P Node shares same dimensions as 65153 Node.

C-Clamp

3.625 in92.1 mm

Ethernet Connection


N21 ShowNet DMX512 Networking Nodes

65151 N21 ShowNet Node, 2-Port, POE, 2-gang65152 N21 ShowNet Node, POE, SN110 retrofit65153 N21 ShowNet Node, 2-Port Node, POE, with surface mount back box

65153-P N21 ShowNet Node, 2-Port, POE, with portable mount back box, C-clamp/U-bolt hardware65154 N21 ShowNet Node, 4-Port, 1U rack mount enclosure, universal AC adapter


Simplified programming and configuration.

Using a simple point-and-click web browser interface, routing DMX512 is very easy and the most powerful part of a Strand Lighting ShowNet network. Over 32,000 DMX512 addresses are supported on all Strand networks.


Connectivity

DMX512: 2 Each, 5-pin female XLREthernet: 1 Each, RJ45

Mechanical Data

Construction: Wall Mount: Steel faceplate, unit is designed to fit a standard deep masonry box Rack Mount: Steel enclosureWeight: Wall Mount: 1.9 lbs / 0.86 kg Rack Mount: 4.9 lbs / 2.2 kgDimensions: Wall Mount: Refer to Drawings on Page Two Rack Mount: Refer to Drawing on Page Two

Environmental Data

Operating Temperature: 32 to 104ºF / 0 to 40ºCStorage Temperature: -40 to 158ºF / -40 to 70ºCHumidity: 5% - 95% non-condensing

Electrical Data

Input Power: Wall Mount: IEEE 802.3AF Power over Ethernet on all 2-port models. Rack Mount: AC to DC Power Supply, Universal Voltage (included)

022813NA_EUA


This page intentionally left blank




Selecon LED Fixtures





APPROVED BY:

PL House Light LED LuminairesA revolutionary break through in Theatrical and Entertain-ment House L ight ing. Drawing on technology and specific insight, nurtured and developed with in the Philips Entertainment group the PL House Light LED Luminaire offers an RGBW 50,000 hour L70 replacement for 300 and 500 watt halogen house lights.

Being an RGBW LED luminaire the PL House light also aides in the overall lighting design of a production giving designers the control and flexibil i ty to immerse the audience in color.

Features Fully tunable high output RGBW LED light engine

supporting color temperatures from 2300K to 9970K and full color mixing with a maximum output similar to that of a 70 watt metal halide luminaire

High CRI is maintained down to very low light levels (>50 Lux) as the integral dimmer (0 to 100%) reduces intensity with minimal color shift maintaining the selected color balance

Quick selection of Warm White, Cool White and Daylight color presets simplifies matching existing light sources

Adjustable 20° to 45° beam spread

Defined maximum energy consumption with power presets - from 30 watts to full power

LED light engine is comprised of a single chip with RGBW LEDs

Full color mixing for creative flexibility in lighting your display - PL House Light LED luminaire features a broad color gamut with precise color mixing controls

No ultra-violet (wavelengths of less than 400nm) - for UV - A, B or C or the Infrared spectrum (wavelengths of more than 775nm) are emitted by PL House Light LED luminaires

Choice of wireless DMX 512 receiver compatible with Wireless Solutions W-DMX, Lumen Radio Wireless DMX, and City Theatrical Show DMX (all sold separately)

Available with either black or clear (polished) reflectors for new construction or retrofit applications

On-board LCD display and menu system for easy setup and control

Electronic power supply; ETL / cETL approved and CE marked

PL House Light LED Luminaire for New Construction

PL House Light LED Luminaire for Retrofit Applications

Selecon LED FixturesPL House Light LED Luminaire

Beam Diameter 7.26 10.89 14.52 18.15 21.78

Throw Distance 10 15 20 25 30

Central Illumination Foot Candles

Warm White (3,200K) 59 26 15 9 7

Cool White (4,000K) 78 35 20 13 9

Day Light (5,600K) 98 43 24 16 11

40o Beam Spread (Lens Tube at #6)

30o Beam Spread (Lens Tube at #8~#9)

Photometrics (Feet / Foot Candles)

PL House Light LED Engine

PL House Light’s powerful LED engine offers exceptional performance and life. Under normal operating conditions our LED engine has a life expectancy in excess of 50,000 hours, however under worst case operating conditions with the luminaire set to continuous full output it is possible that a small percentage of LED’s may require replacement sooner. The Philips Selecon three-year limited warranty includes our guarantee against premature failure of the LED engine.


Beam Diameter 5.32 7.98 10.64 13.30 15.96 18.62 21.28

Throw Distance 10 15 20 25 30 35 40


Warm White (3,200K) 108 48 27 17 12 9 7

Cool White (4,000K) 150 67 38 24 17 12 9

Day Light (5,600K) 186 83 46 30 21 15 12

Beam Diameter 3.63 5.445 7.26 9.075 10.89 12.705 14.52 16.335 18.15

Throw Distance 10 15 20 25 30 35 40 45 50


Warm White (3,200K) 224 100 56 36 25 18 14 11 9

Cool White (4,000K) 316 140 79 51 35 26 20 16 13

Day Light (5,600K) 376 167 94 60 42 31 24 19 15


Beam Diameter 2.21 3.32 4.43 5.53 6.64

Throw Distance 3.05 4.57 6.1 7.62 9.14

Central Illumination Lux

Warm White (3,200K) 629 280 157 101 70

Cool White (4,000K) 842 375 211 135 94

Day Light (5,600K) 1049 467 262 168 117


30o Beam Spread (Lens Tube at #8~#9)

Photometrics (Meters / Lux)


Beam Diameter 1.62 2.43 3.25 4.05 4.86 5.68 6.49

Throw Distance 3.05 4.57 6.1 7.62 9.14 10.67 12.19


Warm White (3,200K) 1160 517 290 186 129 95 73

Cool White (4,000K) 1617 720 404 259 180 132 101

Day Light (5,600K) 1995 889 499 320 222 163 125

Beam Diameter 1.11 1.66 2.21 2.77 3.32 3.87 4.42 4.98 5.53

Throw Distance 3.05 4.57 6.1 7.62 9.14 10.67 12.19 13.72 15.24


Warm White (3,200K) 2407 1072 602 386 268 197 151 119 96

Cool White (4,000K) 3395 1512 849 544 378 277 213 168 136

Day Light (5,600K) 4046 1802 1011 648 451 331 253 200 162


6.5 in. /165.1 mm

5.9 in. / 149.9 mm

4.5 in. / 114.3 mm

15.0 in. /381.0 mm

8.0 in. /203.2 mm

12.0 in. / 304.8 mm

7.6 in. / 193.1 mm

3.5 in. / 88.9 mm

4.3 in. / 109.2 mm

7.6 in. / 193.1 mm

4.5 in. / 114.3 mm

4.3 in. / 109.2 mm

5.9 in. / 149.9 mm

6.5 in. /165.1 mm

4.5 in. / 114.3 mm

14.6 in. /370.8 mm

7.9 in. /200.7 mm

12.0 in. / 304.8 mm

PL House Light LED Luminaire (New Construction Models)

PL House Light LED Luminaire (Retrofit Construction Models)

Note: Power interconnect cable, between J-Box and luminaire assembly removed for clarity.


Trim Ring / Reflector Assembly

Trim Ring Mounting Assembly

J-Box (for electrical connections)

120W LED Engine

LCD Display Menu System

Note: PLHLRC model shown. Basic features are the same for all models.


Electrical SpecificationsSource: True RGBW 120W LED chipOutput: > 2,000 lumens (white light)Operating Voltages: 120 Volts ACFrequency: 50/60 HzCurrent Draw 1.25 Amps (150 Watts)Quiescent Load: 2.4 WattsAmbient Temperature: 0° to 40°CControl: On-board menu / DMX512DMX512 Channels: 15 Channels (16-Bit Mode) 9 Channels (8-Bit Mode) 3 Channels (3-Channel Mode)Standards Compliance: ETL/cETL Listed and CE Marked (NON-IC Rated)*

Mechanical SpecificationsConstruction: Die cast aluminum and molded engineering grade plastic components

Lenses: Precision coated aspheric lensesBeam Spread: 20o to 45o

*Note: PL House Light LED Luminaires are NON-IC (NON

Insulated Contact) Rated fixtures. If insulation is present in an

application where these fixtures are used, a minimum 3-inches of

clearance should exist on all sides of the fixture, and no insulation

may be present across the top of the installed fixture.

021113NA_EUA


Selecon Lighting

Dallas New York 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2013Dallas, Texas 75238 New York, NY 10016 All rights reserved.Tel: (214) 647-7880 Tel: (212) 213-8219 The Company reserves the rightFax: (214) 647-8031 Fax: (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE

Auckland Asia Europe19-21 Kawana Street Unit C, 14/F, European Service & Distribution CentreNorthcote, Auckland 0627 Roxy Industrial Centre Rondweg zuid 85New Zealand No. 41-49 Kwai Cheong Road Winterswijk 7102 JDTel: +64 9 481 0100 Kwai Chung, N.T. Hong Kong the Netherlands Fax: +64 9 481 0101 Tel: +852 2796 9786 Tel: +31(0) 543-542516 Fax: +852 2798 6545


PL House Light LED Luminaires

Retrofit Models (120V Markets)

PLHLRC PL House Light LED Luminaire for Retrofit Installations, Clear (polished) ReflectorPLHLRB PL House Light LED Luminaire for Retrofit Installations, Black Reflector

New Construction Models (120V Markets)

PLHLIC PL House Light LED Luminaire for New Construction, Clear (polished) ReflectorPLHLIB PL House Light LED Luminaire for New Construction, Black Reflector

Retrofit Models (230V Markets)

PLHL230RC PL House Light LED Luminaire for Retrofit Installations, Clear (polished) ReflectorPLHL230RB PL House Light LED Luminaire for Retrofit Installations, Black Reflector

New Construction Models (230V Markets)

PLHL230IC PL House Light LED Luminaire for New Construction, Clear (polished) ReflectorPLHL230IB PL House Light LED Luminaire for New Construction, Black Reflector

Accessories - Sloped Ceiling Adapters*

PLHLSA5 PL House Light LED Luminaire 5o Slope Adapter (Philips Lightolier# 7926-MC)PLHLSA10 PL House Light LED Luminaire 10o Slope Adapter (Philips Lightolier# 7926-MD)PLHLSA15 PL House Light LED Luminaire 15o Slope Adapter (Philips Lightolier# 7926-ME)PLHLSA20 PL House Light LED Luminaire 20o Slope Adapter (Philips Lightolier# 7926-MF)PLHLSA25 PL House Light LED Luminaire 25o Slope Adapter (Philips Lightolier# 7926-MG)PLHLSA30 PL House Light LED Luminaire 30o Slope Adapter (Philips Lightolier# 7926-MH)

*Sloped ceiling adapters are for New Construction Models (PLHLIC and PLHLIB) only.

Accessories - Luminaire DMX Cables

PL1DMXFRJ45 DMX512 cable XLR5 Female to RJ45 12 in. / 305 mm WhitePL1DMXFRJ46 DMX512 cable XLR5 Female to RJ45 12 in. / 305 mm BlackPL1DMXMRJ47 DMX512 cable XLR5 Male to RJ45 12 in. / 305 mm WhitePL1DMXMRJ48 DMX512 cable XLR5 Male to RJ45 12 in. / 305 mm Black

Accessories - Wireless DMX Receivers

PL1WDMX03 Wireless Solutions Wireless DMX512 Receiver, Black**PL1LDMX03 Lumen Radio Wireless DMX512 Receiver, Black**PL1SDMX03 City Theatrical DMX512 Receiver, Black**PLHLWL PL House Light LED Luminaire Wireless DMX Receiver Adapter Plate

**A PLHLWL adapter plate is required for all wireless DMX512 receivers (sold separately).






APPROVED BY:

PLPROFILE4 LED LuminaireThe PLPROFILE4 luminaire is a LED, variable-beam profile with precise beam control and pattern projection from a high output beam. An innovative combination of LED source technology and precision optical design, the PLPROFILE4 luminaire delivers Philips Selecon’s industry benchmark projection quality in a compact, robust luminaire.

The PLPROFILE4 luminaire uses the same proven LED engine as the Philips Selecon PL3, PL1, PL Series 1 luminaire range ,and the Philips VARI*LITE VLX wash luminaire ranges, meaning color matching is simplified across the stage. The user interface is the same ensuring ease of use.

A key benefit of the PLPROFILE4 luminaire is that it is no longer necessary to change lamps or color filter. Combining the superior control and light quality of a Philips Selecon Profile with seamless fading between colors allows designers a new level of creativity. Less power consumption and no dimmer circuits makes the PLPROFILE4 luminaire the obvious choice for pattern projection and stage washes on the larger stage.

PLPROFILE4 LED Luminaire

Features• Four RGBW LED chips deliver limitless color mixing and variable color temperature.

• Seven optical systems: 15°-35° and 25°-50° Zoomspots; 14°,19°, 26°, 36° and 50° Fixed Beams.

• All lens tubes interchangeable and can be ordered separately. 360° barrel rotation.

• Infinite color choice from the RGBW engines and supporting color temperatures from 2300K to 9970K in white

• Homogenized fully mixed color output light, no multiple color shadows

• Ten’s of thousands of hours of life expectancy

• Quick selection of Warm White, Cool White, and Daylight

• Color presets simplifies matching existing light sources

• User defined on board presets states available to record your color composition

• Constant color balance down to very low light levels irrespective of intensity setting

• DMX512 Input/Output with 8 or 16-bit resolution or a simple 3-channel control

• Wireless DMX512 option - compatible with Wireless Solution W-DMX, Lumen Radio, or City Theatrical Show DMX512 transmitters

• On-board LCD menu for ease of luminaire set up and addressing

• No ultra-violet (wavelengths of less than 400nm) – for UVA, B or C or the Infrared spectrum (wavelengths of more than 775nm)

• Luminaire color: black

• Electronic universal power supply 100-240VAC

• PowerCon In and Through connectors

• Electronic power supply; cETLus listed and CE marked




Advanced Control

The PLPROFILE4 LED luminaire has an on-board LCD menu system for luminaire setup, control, and addressing. The menu system is extremely user-friendly and offers all configuration options with a few button presses.

Wireless DMX512 Control

Having t rouble get t ing data to your l ight on set? Al l PLPROFILE4 luminaires support wireless DMX512 control for instant connections without running control wiring. Each wireless receiver also has a DMX512 out port to control adjacent luminaires. Receivers are available for Wireless Solution W-DMX, Lumen Radio, or City Theatrical DMX512 transmitters.

Console Control

All PLPROFILE4 luminaires support wired and wireless DMX512 control with a choice of 8 or 16 bit control resolution or simple 3-channel control. With the increased development of LED luminaires like PL1 and PL3 with 4 or more colors additional control is needed for intuitive operation. All Strand Lighting Palette family controls support extended color control and color temperature control to simplify programming and luminaire color matching.

PLPROFILE4 Luminaire LED Engine

The PLPROFILE4 luminaire’s powerful LED engines offer exceptional performance and life. Under normal operating conditions our LED engine has a potential life expectancy of up to 50,000 hours, however under worst case operating conditions with the luminaire set to continuous full output i t is possible that a smal l percentage of LEDs may require replacement sooner. The Philips Selecon three-year limited warranty includes our guarantee against premature failure of the LED engine.

1

2

LCD Menu Display

Loca l con t ro l s o f f e r t he ab i l i t y t o access p rese t co l o r temperatures; locally stored custom presets adjust intensity; colors and motorized focus.

1

2

PLPROFILE4 Luminaire Advanced Control

Strand Lighting Light Palette VL


Selecon LED FixturesPLPROFILE4 LED Luminaire

Electrical Specifications

Source: 4 Each, True RGBW 120W LED chip

Operating Voltages: 100 to 240 Volts AC (auto-ranging)

Frequency: 50/60 Hz

Current Draw: 6.0 Amps (100V) / 2.5 Amps (240V) - Maximum load with all LEDs at full RGBW

Maximum Thru (AC): 20 Amps at thru connector

Ambient Temperature: 0° to 40°C (32° to 104°F)

Control: On-Board Menu / DMX512A

DMX512 Channels: 15 Channels (16-Bit Mode) 9 Channels (8-Bit Mode) 3 Channels (3-Channel Mode)

Standards Compliance: cETLus Listed and CE Marked

Mechanical Specifications

Construction: Machined aluminum, sheet metal, and molded engineering grade plastic components

Color: Black

Weight: 25.2 lbs / 11.5 kg (luminaire engine/shutter/yoke assemblies only)

Optical Specifications

Output: > 6,000 lumens (white light)


DimensionsFront ViewSide View

LUMINAIRE - TOTAL LENGTH (SEE CHART)

16.9 in / 430 mm

9.8 in / 250 mm

R 9.1 in / 231.1 mm

12.9 in / 327.7 mm

16.3 in / 414.3 mm

Luminaire Dimensional Chart

Angle (°)

14

19

26

36

5015-35

25-50

Metric (mm)

400

310

270

250

200

370

280

Imperial (in)

15.7

12.2

10.6

9.8

7.9

14.6

11.0

Metric (mm)

835

745

705

685

635

805

715

Imperial (in)

32.9

29.3

27.7

27.0

25.0

31.7

28.1

Lens Tube Length Luminaire Total Length

Fixe

dZo

om


Selecon Lighting

Dallas New York 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2013Dallas, Texas 75238 New York, NY 10016 All rights reserved.Tel: +1 (214) 647-7880 Tel: +1 (212) 213-8219 The Company reserves the rightFax: +1 (214) 647-8031 Fax: +1 (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE

Auckland Asia Europe19-21 Kawana Street Unit C, 14/F, European Service & Distribution CentreNorthcote, Auckland 0627 Roxy Industrial Centre Rondweg zuid 85New Zealand No. 41-49 Kwai Cheong Road Winterswijk 7102 JDTel: +64 9 481 0100 Kwai Chung, N.T. Hong Kong the Netherlands Fax: +64 9 481 0101 Tel: +852 2796 9786 Tel: +31 (0) 543-542516 Fax: +852 2798 6545

PLPROFILE4 LED Luminaires

PLPF4-03 PLPROFILE4 LED Luminaire LED Engine Only, Black, with C-Clamp, Top Box, Top Box Bolt, Safety Cable and PowerCon AC Input Connector PLPF4-03-14 PLPROFILE4 LED Luminaire LED Engine, Black, with Axial Ellipsoidal 14o Fixed Beam Lens (SPX14LT), C-Clamp, Top Box, Top Box Bolt, Safety Cable and AC Input Cable (PC1XX*)PLPF4-03-19 PLPROFILE4 LED Luminaire LED Engine, Black, with Axial Ellipsoidal 19o Fixed Beam Lens (SPX19LT), C-Clamp, Top Box, Top Box Bolt, Safety Cable and AC Input Cable (PC1XX*)PLPF4-03-26 PLPROFILE4 LED Luminaire LED Engine, Black, with Axial Ellipsoidal 26o Fixed Beam Lens (SPX26LT), C-Clamp, Top Box, Top Box Bolt, Safety Cable and AC Input Cable (PC1XX*)PLPF4-03-36 PLPROFILE4 LED Luminaire LED Engine, Black, with Axial Ellipsoidal 36o Fixed Beam Lens (SPX36LT), C-Clamp, Top Box, Top Box Bolt, Safety Cable and AC Input Cable (PC1XX*)PLPF4-03-50 PLPROFILE4 LED Luminaire LED Engine, Black, with Axial Ellipsoidal 50o Fixed Beam Lens (SPX50LT), C-Clamp, Top Box, Top Box Bolt, Safety Cable and AC Input Cable (PC1XX*)PLPF4-03-1535 PLPROFILE4 LED Luminaire LED Engine, Black, with Axial Ellipsoidal 15o to 35o Zoomspot Lens (SPX1535LT), C-Clamp, Top Box, Top Box Bolt, Safety Cable and AC Input Cable (PC1XX*)PLPF4-03-2550 PLPROFILE4 LED Luminaire LED Engine, Black, with Axial Ellipsoidal 25o to 50o Zoomspot Lens (SPX1535LT), C-Clamp, Top Box, Top Box Bolt, Safety Cable and AC Input Cable (PC1XX*)

*Specify AC input connector at time of ordering (GR - Edison / GP - Grounded Stagepin / GTL - Twistlock).

Accessories - Clamps

SC Selecon Molded Yoke Rated C-ClampMC Mega Claw, Black Anodized

Accessories - Luminaire Software Uploader Cable

PLUPLD USB Luminaire Software Programming Kit (for updating or reloading luminaire software only) - includes USB to DMX Dongle, Uploader Program, and Carry Bag

Accessories - Lens / Projection

20IRIS 20-Leaf SPX IrisSPXGHB SPX Gobo Holder, Size B, for Metal GobosSPXGHGB SPX Gobo Holder, Size B, for Glass Gobos19PACCF SPX Color Frame, Spare19PACSMFB SPX Lens Safety, Mesh19SPXCF SPX Replacement Color Frame, 6-1/4” Square, BlackSPX14LT SPX Axial Ellipsoidal 14o Fixed Beam Lens Tube OnlySPX19LT SPX Axial Ellipsoidal 19o Fixed Beam Lens Tube OnlySPX26LT SPX Axial Ellipsoidal 26o Fixed Beam Lens Tube OnlySPX36LT SPX Axial Ellipsoidal 36o Fixed Beam Lens Tube OnlySPX50LT SPX Axial Ellipsoidal 50o Fixed Beam Lens Tube OnlySPX1535LT SPX Axial Ellipsoidal 15o to 35o Zoomspot Lens Tube OnlySPX2550LT SPX Axial Ellipsoidal 25o to 50o Zoomspot Lens Tube Only

Accessories - AC Power Input Cables

PC1BE PL Series Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon without AC connector (bare end) PC1GP PL Series Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Stagepin Connector PC1GTL PL Series Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Twistlock ConnectorPC1GR PL Series Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Edison Connector

Accessories - AC Interconnect Cables

PC3PC PL Series Luminaire PowerCon Male to PowerCon Female 2.5 Meter Cable for interconnection between units

Accessories - Wireless DMX512 Receivers

PL1WDMX03 W-DMX Wireless DMX512 Receiver (Wireless Solutions) BlackPL1LDMX03 Lumen Radio Wireless DMX512 Receiver BlackPL1SDMX03 City Theatrical Wireless DMX512 Receiver Black

Accessories - Wireless DMX512 Transmitters

PL1WDMXTR W-DMX Wireless DMX512 TransmitterPL1LDMXTR Lumen Radio Wireless DMX512 TransmitterPL1SDMXTR City Theatrical Wireless DMX512 Base Transmitter

030113_NA_EUA







APPROVED BY:


Features• Delivers the performance of a 500 watt profile fixture with a maximum power consumption of 150 watts

• Available in 18 to 34 or 24 to 44 degree beam angles

• Interchangeable lens tray between medium and wide versions

• Slot provided for iris, M-size pattern holder, or third party effect accessory

• Infinite color choice from the RGBW engine and supporting color temperatures from 2700K to 5600K in white













• Electronic power supply; ETL / cETL approved and CE marked

PLPROFILE1 LED LuminaireThe PLPROFILE1 LED luminaire is a variable beam profile with precise beam control and pattern projection from a high output beam. An innovative combination of LED source technology and precision optical design, the PLPROFILE1 luminaire delivers Philips Selecon’s industry benchmark projection quality in a compact, robust fixture.

A key benefit of the PLPROFILE1 luminaire is that it is no longer necessary to change lamps or color filter. Combining the superior control and light quality of a Philips Selecon Profile with seamless fading between colors allows designers a new level of creativity. Less power consumption and no dimmer circuits makes the PLPROFILE1 luminaire the obvious choice for pattern projection and stage washes.




Advanced Control

The PLPROFILE1 LED luminaire has an on-board LCD menu system for luminaire setup, control, and addressing. The menu system is extremely user-friendly and offers all configuration options with a few button presses.

Console Control

All PLPROFILE1 luminaires support DMX512 control with a choice of 8 or 16 bit control resolution or simple 3-channel control. With the increased development of LED luminaires like PL1 and PLPROFILE1 with 4 or more colors additional control is needed for intuitive operation. All Strand Lighting Palette family controls now support extended color control and color temperature control to simplify programming and luminaire color matching.

PLPROFILE1 LED Engine

The PLPROFILE1 luminaire’s powerful LED engines offer exceptional performance and life. Under normal operating conditions our LED engine has a potential life expectancy of up to 50,000 hours, however under worst case operating conditions with the luminaire set to continuous full output i t is possible that a smal l percentage of LEDs may require replacement sooner. The Philips Selecon three-year limited warranty includes our guarantee against premature failure of the LED engine.

The PLPROFILE1 luminaire uses the same proven LED engine as the Philips Selecon PL3, PL1, PLCYC1, PLFRESNEL1 and the Philips Vari-Lite VLX luminaires meaning the color experience is simplified across the stage.

1

2

LCD Menu Display


1

2

PLPROFILE1 Luminaire Advanced Control



Interchangeable lens trays for fast and easy choice of either medium zoom (18-34 degrees) or wide zoom (24-44 degrees) without the use of tools. Lens trays sold separately.





Frequency: 50/60 Hz


Power Consumption: 150 Watts (max., RGBW at 100%)


Control: On-Board Menu / DMX512


Standards Compliance: ETL/cETL Listed and CE Marked



Color: Black

Weight: 18.7 lbs / 8.5 kg (luminaire only)



Beam Angle: 18-34 Degrees or 24-44 Degrees (depends on lens option purchased)



664.9 mm / 26.2 in.173.0 mm / 6.8 in.

310.0 mm / 12.2 in.

249.

8 m

m /

9.8

in.

404.

8 m

m /

15.9

in.

Ordering Information

Cat No. Description

PLPROFILE1 LED Luminaires

PLZS1-1834-03 PLPROFILE1 LED Luminaire, 18-34 Degree Zoomspot, Black, with SC C-Clamp, Safety Cable, and AC Input Cable*

PLZS1-2444-03 PLPROFILE1 LED Luminaire, 24-44 Degree Zoomspot, Black, with SC C-Clamp, Safety Cable, and AC Input Cable* *Specify AC input connector at time of ordering (GR - Edison / GP - Grounded Stagepin / GTL - Twistlock).

Accessories - Zoomspot Lenses

15ACAX1834LT Acclaim Axial Zoomspot 18-34 Degrees Lens Tray, Black15ACAX2444LT Acclaim Axial Zoomspot 24-44 Degrees Lens Tray, Black



Accessories - Top Box Assembly

PLICB Spare Top Box (Interconnect) Assembly


PC1BE PLPROFILE1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon without AC connector (bare end) PC1GP PLPROFILE1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Stagepin Connector PC1GTL PLPROFILE1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Twistlock ConnectorPC1GR PLPROFILE1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Edison Connector


PC3PC PLPROFILE1 Luminaire PowerCon Male to PowerCon Female 2.5 Meter Cable for interconnection between units



021113_NA_EUA


Infinite color choices from the RGBW engine and supporting color temperatures from 2700K to 5600K in white.

Philips Selecon

Dallas New York www.seleconlight.com 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2013Dallas, TX 75238 New York, NY 10016 All rights reserved.Tel: +1 (214) 647-7880 Tel: +1 (212) 213-8219 The Company reserves the rightFax: +1 (214) 647-8031 Fax: +1 (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE


PLFRESNEL1 LED Luminaire






APPROVED BY:

Features• Delivers the performance of a 500 watt fresnel fixture with a maximum power consumption of 150 watts

• Variable beam angle from 15 to 54 degrees

• Infinite color choice from the RGBW engine and supporting color temperatures from 2700K to 5600K in white














PLFRESNEL1 LED LuminaireThe PLFRESNEL1 LED Luminaire is a general purpose lighting fixture for theatre, small studio, and display lighting applications. It produces an adjustable cone of light with a soft edge which is easily blended with adjacent beams to provide even i l luminat ion. Using LED source technology combined with a traditional Fresnel lens, the PLFRESNEL1 LED Luminaire delivers Philips Selecon’s industry benchmark quality without the compromising performance of spreader lenses.

A key benefit of the PLFRESNEL1 LED Luminaire is that it is no longer necessary to change lamps or color filters. Combining the superior control and light quality of a Philips Selecon Fresnel with seamless fading between colors allows designers a new level of creativity. Less power consumption and no dimmer circuits makes the PLFRESNEL1 LED Luminaire the obvious choice for any stage lighting need.




Advanced Control

The PLFRESNEL1 LED luminaire has an on-board LCD menu system for luminaire setup, control, and addressing. The menu system is extremely user-friendly and offers all configuration options with a few button presses.

Console Control

All PLFRESNEL1 luminaires support DMX512 control with a choice of 8 or 16 bit control resolution or simple 3-channel control. With the increased development of LED luminaires like PL1 and PLPROFILE1 with 4 or more colors additional control is needed for intuitive operation. All Strand Lighting Palette family controls now support extended color control and color temperature control to simplify programming and luminaire color matching.

PLFRESNEL1 LED Engine

The PLFRESNEL1 luminaire’s powerful LED engines offer exceptional performance and life. Under normal operating conditions our LED engine has a potential life expectancy of up to 50,000 hours, however under worst case operating conditions with the luminaire set to continuous full output i t is possible that a smal l percentage of LEDs may require replacement sooner. The Philips Selecon three-year limited warranty includes our guarantee against premature failure of the LED engine.

The PLFRESNEL1 luminaire uses the same proven LED engine as the Philips Selecon PL3, PL1, PLCYC1, PLPROFILE1 and the Philips Vari-Lite VLX luminaires meaning the color experience is simplified across the stage.

1

2

LCD Menu Display


1

2

PLFRESNEL1 Luminaire Advanced Control


PLFRESNEL1 Luminaire LED Engine

Selecon LED FixturesPLFRESNEL1 LED Luminaire




Frequency: 50/60 Hz


Power Consumption: 150 Watts (max., RGBW at 100%)


Control: On-Board Menu / DMX512


Standards Compliance: ETL/cETL Listed and CE Marked



Color: Black




Beam Angle: 15 to 54 Degrees (user adjustable)



444.8 mm / 17.5 in.

341.9 mm / 13.5 in.

249.6 mm / 9.8 in.

208.3 mm / 8.2 in.


Cat No. Description

PLFRESNEL1 LED Luminaires

PLFR1-03 PLFRESNEL1 LED Luminaire, 15-54 Degree Fresnel, Black, with Top Box (Interconnect) Assembly, SC C-Clamp, Safety Cable, and AC Input Cable* *Specify AC input connector at time of ordering (GR - Edison / GP - Grounded Stagepin / GTL - Twistlock).

Accessories - Barndoors

20BDMF Acclaim Fresnel Barndoor, 4-Way, Black



Accessories - Top Box Assembly

PLICB Spare Top Box (Interconnect) Assembly


PC1BE PLFRESNEL1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon without AC connector (bare end) PC1GP PLFRESNEL1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Stagepin Connector PC1GTL PLFRESNEL1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Twistlock ConnectorPC1GR PLFRESNEL1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Edison Connector


PC3PC PLFRESNEL1 Luminaire PowerCon Male to PowerCon Female 2.5 Meter Cable for interconnection between units



021113_NA_EUA

Selecon LED FixturesPLFRESNEL1 LED Luminaire

Infinite color choices from the RGBW engine and supporting color temperatures from 2700K to 5600K in white.

Note, unit shown with optional barndoor accessory.

Philips Selecon

Dallas New York www.seleconlight.com 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2013Dallas, TX 75238 New York, NY 10016 All rights reserved.Tel: +1 (214) 647-7880 Tel: +1 (212) 213-8219 The Company reserves the rightFax: +1 (214) 647-8031 Fax: +1 (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE







APPROVED BY:

PL3 LED LuminaireA revolutionary breakthrough in stage and studio lighting the PL3 LED Luminaire delivers full control of the beam color composition irrespective of intensity.

Drawing on technology and specific insight, nurtured and developed, within the Philips Entertainment group the PL3 meets the everyday challenges of illuminating the world’s stages and studios. A lighting instrument that extends the creative possibilities with light while significantly reducing the impact of our activities on the environment. PL3 LED Luminaire

Features• High output RGBW LED luminaire delivering the output of a 1000/1200-watt Fresnel

• Infinite color choice from the three RGBW engines, supporting color temperatures from 2300K to 9970K

• Variable beam angle from a 15 degree spot to a 55 degree flood angle - flood angle can be shaped using the four or eight door barndoor accessory

• Homogenized fully mixed "white" light, no multiple color shadows

• 25,000 hour life before degradation in light output and quality is expected

• Quick selection of Warm White, Cool White, and Daylight color presets simplifies matching existing light sources



• DMX512 input with 8 or 16-bit resolution

• Wireless DMX512 options - compatible with Wireless Solution W-DMX, Lumen Radio, or City Theatrical DMX512 transmitters

• Motorized Zoom to adjust beam angle - at menu system or via DMX512 control


• No ultra-violet (wavelengths of less than 400nm) - for UVA, B or C or the Infrared spectrum (wavelengths of more than 775nm)

• Luminaire colors: black or white



PL3 LED Luminaire

PL3 LED Luminaire

Advanced Control

The PL3 LED luminaire has an on-board LCD menu system for luminaire setup, cont ro l , and address ing. The menu sys tem is ex t remely user-friendly and offers all configuration options with a few button presses.

Wireless DMX512 Control

Working on location? Having trouble getting data to your light on set? All PL3 luminaires support wireless DMX512 control for instant connections without running control wiring. Each wireless receiver also has a DMX512 out port to control adjacent luminaires. Receivers are available for Wireless Solution W-DMX, Lumen Radio or City Theatrical transmitters.

Console Control

All PL3 luminaires support wired and wireless DMX512 control with a choice of 8 or 16 bit control resolution. With the increased development of LED luminaires like PL1 and PL3 with 4 or more colors additional control is needed for intuitive operation. All Strand Lighting Palette family controls support extended color control and color temperature control to simplify programming and luminaire color matching.

12

LCD Menu Display


1

2

PL3 Luminaire Advanced Control



PL3 LED Luminaire

PL3 LED Luminaire

Lighting for Every Need

The PL3 luminaire delivers color balanced whites for stage, television, and film production along with beautiful colors to meet the needs of lighting directors and designers everywhere. The long life of the LED engines, reduces maintenance cost dramatically and with the energy savings PL3 delivers; users will quickly see the total cost of ownership benefits.

PL3 LED Luminaire shown with Barndoor Option

PL3 LED luminaire at Daylight and Warm White settings

Lighting for Designers with...

• An adjustable beam 15 to 55 degrees

• Barndoors or snoot provide beam control

• Absolute color control

• Precise intensity control

• Homogeneous beam free of multi colored shadows

The PL3 LED luminaire extends the creative opportunities of lighting design to tell a story, command attention, and direct emotion.

PL3 LED Engine

PL3’s powerful LED engines offer exceptional performance and life. Under normal operating conditions our LED engine has a life expectancy in excess of 25,000 hours, however under worst case operating conditions with the luminaire set to continuous full output it is possible that a small percentage of LEDs may require replacement sooner. The Philips Selecon three-year limited warranty includes our guarantee against premature failure of the LED engine.

Selecon LED FixturesPL3 LED Luminaire

Meters Feet

Throw Distance 2.0 4.0 6.0 8.0 6.0 12.0 18.0 24.0

Beam Diameter 2.1 4.2 6.4 8.5 6.4 12.7 19.1 25.5

Wattage* Central Illumination (Lux) Wattage Central Illumination (Footcandles)

Warm White 148 2327 582 259 145 148 223 56 25 14

Cool White 205 2962 741 329 185 205 284 71 32 18

Daylight 246 3396 849 377 212 246 326 81 36 20

Blue 78 179 45 20 11 78 17 4 2 1

Red 70 683 171 76 43 70 65 16 7 4

Green 136 1951 488 217 122 136 187 47 21 12

PL3 - Wide (56o Field Angle)

Photometrics (preliminary)

Meters Feet

Throw Distance 4.0 8.0 12.0 16.0 12.0 24.0 36.0 50.0

Beam Diameter 1.0 2.1 3.1 4.1 3.1 6.2 9.3 13.0

Wattage* Central Illumination (Lux) Wattage Central Illumination (Footcandles)

Warm White 148 8140 2035 904 509 148 781 195 87 45

Cool White 205 10501 2625 1167 656 205 1007 252 112 58

Daylight 246 12068 3017 1341 754 246 1157 289 129 67

Blue 78 659 165 73 41 78 63 16 7 4

Red 70 2326 582 258 145 70 223 56 25 13

Green 136 6923 1731 769 433 136 664 166 74 38

PL3 - Narrow (15o Field Angle)

Note: *Wattage refers to total power consumed at the recorded preset LED levels.



Source: 3 Each, True RGBW 120W LED chipsOutput: > 6,000 lumens (white light)Operating Voltages: 120 to 240 Volts AC (auto-ranging)Frequency: 50/60 HzCurrent Draw 4.60 Amps (120V) / 2.35 Amps (240V) - Maximum load with all LEDs at full RGBWAmbient Temperature: 0° to 50°C (32° to 122°F)Control: On-board menu / DMX512 / Infrared Remote ControlDMX512 Channels: 18 (16-Bit Mode) 12 (8-Bit Mode) 3 (3-Channel Mode) Standards Compliance: ETL/cETL Listed and CE Marked



Colors: Black or White


Lenses: Precision coated aspheric lenses


Dimensions

13.5 in / 343.0 mm

18.7 in / 475.0 mm

12.4 in / 315.0 mm

12.2 in / 310.0 mm

16.4 in / 416.6 mm

14.1 in / 358.1 mm

11.2 in / 284.5 mm

6.6 in / 167.6 mm

9.75 in / 247.7 mm

AC Input

DMX In

DMX Out / Thru


Cat No. Description

Selecon Lighting

Dallas New York 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2012Dallas, Texas 75238 New York, NY 10016 All rights reserved.Tel: +1 (214) 647-7880 Tel: +1 (212) 213-8219 The Company reserves the rightFax: +1 (214) 647-8031 Fax: +1 (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE

Auckland Asia Europe19-21 Kawana Street Unit C, 14/F, European Service & Distribution CentreNorthcote, Auckland 0627 Roxy Industrial Centre Rondweg zuid 85New Zealand No. 41-49 Kwai Cheong Road Winterswijk 7102 JDTel: +64 9 481 0100 Kwai Chung, N.T. Hong Kong the Netherlands Fax: +64 9 481 0101 Tel: +852 2796 9786 Tel: +31 (0) 543-542516 Fax: +852 2798 6545

PL3 LED Luminaire

PL3 PL3 LED Luminaire, BlackPL3W PL3 LED Luminaire, White

Accessories - Barndoors & Holders

PL3ACH PL3 LED Luminaire Accessory Holder20BDSF2020 Barndoor, Black20BDSF20208 Barndoor, 8 Way, Black20CFSF2020 Spare Color Frame

Accessories - Clamps (1)


Accessories - Connectors (2)

GR 15A NEMA 5-15P Male EdisonGP 20A, Male Stage PinGTL 20A, NEMA L5-20P Male Twist-Lock

Notes:

(1) Do Not install the PL3 LED Luminaire using C-Clamp (82019 or USCLAMP). This Luminaire requires the longer bolt utilized in clamps Molded Yoke Rated C-Clamp (SC) or Mega Claw (MC).

(2) All PL3 luminaires ship with a "bare-end" 39 inch/1 meter power input cable. Add -GR, -GP, or -GTL to the part number to have a connector installed. All other accessories sold separately.


Spare Power Input Cables

PL3BE PL3 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with no connector (bare end - user to supply connector) PC1GP PL3 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Stagepin Connector PC1GTL PL3 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Twistlock ConnectorPC1GR PL3 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Edison Connector

Accessories - Wireless DMX Receivers

PL1WDMX03 W-DMX Wireless DMX512 Receiver, BlackPL1LDMX03 Lumen Radio Wireless DMX512 Receiver, BlackPL1SDMX03 City Theatrical Wireless DMX512 Receiver, Black

Accessories - Wireless DMX Transmitters

PL1WDMXTR W-DMX Wireless DMX512 TransmitterPL1LDMXTR Lumen Radio Wireless DMX512 TransmitterPL1SDMXTR City Theatrical Wireless DMX512 Transmitter

073112NA


For further information on the PL3 including the Operation manual please visit the Philips Selecon web site at: www.seleconlight.com/pl3

PL3 LED Luminaire shown with Accessory Holder Option

Documents

Connector Strips - Strand Lighting · 2016-06-10 · Based on our proven R21 Powered Raceway ... Management sensors installed will report load status and ... 76969 Circuit Breaker,