Wifi Setup DocuPrint CM115 wConnecting to

Setting up theDocuPrint CM115 wprinter on a wirelessnetwork

Before you beginEnsure you have the name of your wireless network (SSID), wireless network password, security and encryption types.To find the name and type of security encryption of your wireless network on your computer (example Windows 7):

a) Go to the Start Menu. Select Control Panel and click on Network and Sharing Centre.

b) Click on Manage Wireless Networks. Double click on your preferred wireless network. Note the SSID. Click on the security tab. Note the security and encryption types.

DPCM115w_QSG_P1

the WirelessNetwork

1 WPS-PBC

Note: WPS-PBC (WPS Button), WPS-PBC (Operator Panel)

and WPS-PIN is only available when the wireless access

manual provided with the router.point or router supports WPS-PBC. Please refer to the

(WPS Button)

Before starting WPS-PBC, confirm the position of the WPS button on the wireless access point or router. Please refer to the manual supplied with the router for more information.

1 Press the small green Energy Saver button to wake upthe printer.

Confirm that the Wi-Fi LED starts to blink slowly and press WPS Button on WPS Router appears on the LCD panel.

2 WPS-PBC(Operator Panel Menu)

3 Start the WPS operation on the wireless access point

or router within two (2) minutes. When WPS is successful, the (Wi-Fi) LED lights up. The wireless connection is established and setup for wireless is complete.

At the Operator Panel:

1 Press the small green Energy Saver button to wake upthe printer.

OK

Job Stat

System

2 Press and hold the WPS button on the printer for three(3) seconds.

2 Press the System button.

DocuPrint CM115 w

Admin

Maintenance...System Settings...

DocuPrint CM115 w

Network

Wireless Status...Wireless Setup...WPS Setup...

DocuPrint CM115 w

WPS Setup

PIN Code...

DocuPrint CM115 w

PBC Start

No...Yes...

Confirm that the Wi-Fi LED starts to blink slowly and press WPS Button on WPS Router appears on the LCD panel. Start the WPS operation on the wireless access point or router within two (2) minutes. When WPS is successful, the (Wi-Fi) LED lights up. The wireless connection is establishedand setup for wireless is complete.

Network ...

Push Button Configuration...

4 Scroll to Network and press OK.

5 Scroll to WPS Setup and press OK.

6 Scroll to Push Button Configuration and press OK.

7 Select Yes and press OK.

t CM115 w

DocuPrin

System

Report / List...Meter Readings...Admin Menu...

3 Scroll to Admin Menu and press OK.

DocuPrint CM115 w

Admin

Network ...

3At the Operator Panel:

WPS-PIN

DocuPrint CM115 w

Admin Menu...

DocuPrint CM115 w

Network

Wireless Status...Wireless Setup...WPS Setup...

System

Report / List...Meter Readings...

Maintenance...System Settings...Network ...

Note: The WPS-PIN option requires users to login to the

router to add the PIN Code. Please refer to the manual

provided with the router. If too long is taken to enter the PIN Code into the router a timeout error may occur.

http://onlinesupport.fujixerox.com/

1 Press the small green Energy Saver button to wake upthe printer.

2 Press the System button.

3 Scroll to Admin Menu and press OK.

4 Scroll to Network and press OK.

5 Scroll to WPS Setup and press OK.

OK

Job Stat

System

Wifi Setup DocuPrint CM115 wConnecting to

3 WPS-PIN continued...

DPCM115w_QSG_P2

the WirelessNetwork

6 Write down the displayed 8-digit PIN code or scroll to Print PIN Code and press the OK button to print it.

DocuPrint CM115 w

PIN [123456789]

Print PIN Code...Start Configuration...

8 Confirm that Please Wait...WPS AP Searching appears.

DocuPrint CM115 w

Select AccessDemo_Wifi1... WPA2 Home... WPA2

to and then press OK.

10 Confirm that Please Wait...Wireless Setting appears.

11 Enter the PIN code displayed in Step 6 into the wirelessaccess point or router. Please refer to the manual provided

When WPS is successful, the (Wi-Fi) LED lights up. The connection is established, and setup for wireless is complete.

OK

Job Stat

System

DocuPrint CM115 w

Admin

Maintenance...System Settings...Network ...

4At the Operator Panel:

Auto SSID Setup

Press the small green Energy Saver button to wake up the printer.

1

Note: Some hidden SSID may not be displayed. If the

SSID is not detected, turn on SSID broadcast from the

provided with the router.access point or router. Please refer to the manual

DocuPrint CM115 w

SystemReport / List...Meter Readings...Admin Menu...

DocuPrint CM115 w

Select Access

Demo_Wifi1... WPA2 Home... WPA2

with the router. If too long is taken to enter the PIN Codeinto the router a timeout error may occur.

http://onlinesupport.fujixerox.com/

9 Select the SSID of the access point you want to connect to

7 Scroll to Start Configuration and then press OK.

6 Select the required access point (SSID) and press OK.

DocuPrint CM115 w

Network

Wireless Status...

WPS Setup...Wireless Setup...

5 Scroll to Wireless Setup and press OK. The printerautomatically searches the access points on the network.

4 Scroll to Network and press OK.

3 Scroll to Admin Menu and press OK.

2 Press the System button.

Wifi1... WPA2

DocuPrint CM115 w

Passphrase

[XXXXX...]

Note: When the encryption type of the access point is

WPA2 or Mixed: Enter the PASSPHRASE and then press OK.

Enter the WEP key and then press OK. When the encryption type of the access point is WEP:

When the Auto SSID Setup is successful, the (Wi-Fi)

LED lights up. The wireless connection is established and setup for wireless LAN is complete.

5At the Operator Panel:

Manual SSID Setup

1

OK

Job Stat

System

DocuPrint CM115 w

Report / List...Meter Readings...Admin Menu...

System

1 Press the small green energy saver button to wake up the printer.

7 Enter the passphrase or WEP key and press OK.

2 Press the System button.

3 Scroll to Admin Menu and press OK.

4 Scroll to Network and press OK.

DocuPrint CM115 w

Admin

Maintenance...System Settings...Network ...

DocuPrint CM115 w

Network

Wireless Status...

WPS Setup......Wireless Setup...

DocuPrint CM115 w

Select Access

Manual ...

7 Enter the SSID, and press OK.

8 Select the network mode from Infrastructure and Ad-hoc depending upon your environment, and then press OK.

If you select Infrastructure, proceed to Step 9.

If you select Ad-hoc, proceed to Step 10.

9 Select the encryption type from Mixed Mode PSK, WPA2-PSK-AES or WEP.

IMPORTANT: Be sure to use one of the supported encryption types to protect your network traffic

Mixed Mode PSK or WPA2-PSK-AESa) Select encryption type, then press OKb) Enter the passphrase, then press OK

WEPa) Select encryption type, then press OKb) Enter the WEP key, then press OKc) Select the desired transmit key from Auto, WEP key 1to WEP key 4, then press OK.

10 Select WEP for the encryption type.

11 Enter the WEP key, then press OK.

12

Select the desired transmit key from WEP key 1to WEP key 4, then press OK.

When the Manual SSID Setup is successful, the (Wi-Fi) LED lights up. The wireless connection is established and setup for wireless LAN is complete.

Scroll to PIN Code and press OK.

DocuPrint CM115 w

WPS SetupPush Button Configuration...PIN Code...

5

Scroll to Wireless Setup and press OK. 5

Scroll to Manual and press OK. 6

Home ... WPA2