Upload
others
View
15
Download
0
Embed Size (px)
Citation preview
Configuring GPRS
How to determine if you have GPRS settings?
1. Navigate to “Tools” using the Menu button and select 2. Select the menu option “Settings”3. Select the menu option “Connection”4. Select the menu option “Access Points”Depending on your Service Provider name you should have access points listed.
Menu | Tools | Settings | Connection | Access points
Configuring GPRS (over-the-air settings)
Mobile Internet/GPRS = WAP serviceInternet Setup = Internet service
To send settings to your phone. Go-to the following link:Nokia N80 Settings
*Please check with your service provider to determine which data plan you have on your account.
**Phone will prompt to make the settings saved the default settings if more than one configuration settings exist one the device.
1. Select what type of configuration settings* and follow onscreen instructions.
2. Once the settings are received on the device you can save them by selection Options | Save **
Configuring GPRS (manual settings)
T-Mobile WAP T-Mobile Internet Cingular WAP Cingular Internet AT&T
Connection name
Data bearer
Access point name
User name
Prompt password
Password
Authentication
Homepage
mModeCingular Web / Cingular InternetMediaNetT-Mo Web/T-mobile InternetT-Zones
Packet Data
wap.voicestream.com
None
Packet data
No
Packet Data
(blank)
Packet Data
Normal
Packet Data
Internet2.voicestream.com Proxy
None
No
isp.cingular
(blank)
Normal
wap.cingular
[email protected] None
No
CINGULAR1
http://wap.t-zones.com
None
No
http://t-mobile.com
Normal
http://home
(blank)
Normal
http://device.home
No
(blank)
Normal
http://home
Menu | Tools | Settings | Connection | Access points | Options | New access points | Use default settings
Once entered, select the “Back”option to save.