Upload
vuongnguyet
View
215
Download
1
Embed Size (px)
Citation preview
4th ITMC LILLE METROPOLE 2013 INTERNATIONAL CONFERENCE - HTTP://ITMC.ENSAIT.FR/
CONFERENCE PROGRAM
WEDNESDAY OCTOBER 9th, 2013 09H00 09H30
Opening of the Scientific Conference by Vladan KONCAR, ENSAIT & Mohammed LAHLOU, ESITH
09H30 10H30
PLENARY SESSION 1 “Advanced research in the organic and nano engineering applied to smart textiles” Prof. Seong HUN KIM, Hanyang University, South Corea
PLENARY SESSION 2 “Composites” Prof. Christophe BINETRUY, Ecole Centrale Nantes, France
10H30 - 11H00 COFFEE BREAK
11H00 12H30
PARALLEL SESSION 1 MULTIFUNCTIONAL AND INTELLIGENT TEXTILES
SENSORS & ACTUATORS
Chairman : Mohamed Anouar JAMALI
PARALLEL SESSION 2 MODELING AND SIMULATION
Chairman : Seong HUN KIM
“Light emitting fabrics based on polymer optical fibres for photodymanic therapy” Cédric COCHRANE
1,2, Serge MORDON
1,3, Jean Claude LESAGE
1,3,
Vladan KONCAR1,2
1 Univ. Lille Nord de France, 2 ENSAIT, GEMTEX, France, 3 INSERM, Lille
“Analyzing the tensile behavior of fabrics based on fiber bundle models”
Marianna HALÁSZ1, László M. VAS
1, Péter TAMÁS
2, Alexandra Cs.
KOVÁCS1 Zsuzsanna A. HUSZÁR
1, Bidour AL-GAADI
1, Kolos MOLNAR
1,
Omar CHERKAOUI3 and Mohamed DALAL
3
1 Budapest University of Technology , Polymer Engineering1 & Mechatronics,
Optics and Engineering Informatics2, Hungary , 3 Advanced School of Textile and Clothing Industry, Morocco
“Lightguide fibres based textile for solar energy collection and propagation” Alexandra EL ZEIN
1,2, Aurélie CAYLA
1,2, Cédric COCHRANE
1,2
1ENSAIT, GEMTEX, France, 2 Univ. Lille Nord, France
“Modeling of textile composite reinforcements on the micro-scale” Oliver DÖBRICH, Thomas GEREKE, Chokri CHERIF Technische Universität Dresden, Germany
“Functionalized geotextiles: a novel materials for the heavy metals filtration from the contaminated water” Jalal ISAAD
1,2, Ahmida El ACHARI
1,2,
1 ENSAIT, GEMTEX, France, 2 Univ. Lille Nord, France
“Equilibrium And Kinetics Study Of Reactive Dye Removal From Aqueous Solution By Adsorption On Powder Alfa Fibre” Souad FETTOUCHE1,2, R. MADHOUNI1,2 M. TAHIRI2, Omar CHERKAOUI1 1Laboratoire REMTEX, ESITH, Casablanca-Morocco, 2 University Hassan II Casablanca, Morocco
12H30 - 14H00 LUNCH BREAK
14H00 15H30
PARALLEL SESSION 3 : MULTIFUNCTIONAL AND INTELLIGENT TEXTILES
SENSORS & ACTUATORS
Chairman : Cédric COCHRANE
PARALLEL SESSION 4 MODELING AND SIMULATION
Chairman : Vladan KONCAR
“Conductive polymer based composite used as piezoresistive sensors on PET fibres”
Simon NICOLLE1,2
, Cédric COCHRANE1,2
1 ENSAIT, GEMTEX, France, 2Univ. Lille Nord de France
“A new method for the prediction of drape parameters”
Hamdi THOURAYA1 Ghith ADEL and Fayala FATEN
2
1University of Monastir, Tunisia,
2 Alyssa West Street khezema Sousse
“Contribution to the improvement of an electrochromic textile device: effects of a sol-gel electrolyte”
Constance MORETTI1,2
, Fern M. KELLY1, Vladan KONCAR
1,2,
Ludovic KOEHL1,2
, Xuyuan TAO1,2
1 ENSAIT, GEMTEX, France, 2 Univ. Lille Nord de France
“Determination of correlation between some fabric parameters and drape profile with the principal component analysis (pca)”
Hamdi THOURAYA1, Adel GHITH
2
1University of Monastir, Tunisia , 2 Alyssa West Street khezema Sousse
“New pedot: pss: nmp /pva yarn sensors for in-situ measurements of glass fiber 3d interlock fabric during the weaving process” Nicolas TRIFIGNY
1,2, Fern KELLY
1,2 ,Cédric COCHRANE
1,2, François
BOUSSU1,2
, Damien SOULAT1,2
, Vladan KONCAR1,2
1 ENSAIT, GEMTEX, France, 2 Univ. Lille Nord de France
“Geometrical Modeling of Woven Fabrics Weavability Limit Woven reinforcements and technical fabrics »
Mohamed DALAL1, Jean-Yves DREAN
2, Jean-François OSSELIN
2
1Laboratoire REMTEX, ESITH, Casablanca-Morocco,
2UHA Mulhouse, France
15H30 - 16H00 COFFEE BREAK
4th ITMC LILLE METROPOLE 2013 INTERNATIONAL CONFERENCE - HTTP://ITMC.ENSAIT.FR/
CONFERENCE PROGRAM
16H00 17H30
PARALLEL SESSION 5 MULTIFUNCTIONAL AND INTELLIGENT TEXTILES
Chairman : Chokri SHERIF
PARALLEL SESSION 6 : COMPOSITES
Chairman : Jacek MLYNAREK
“Development and characterization of a new family of technical textiles” Aicha BOUKHRISS1,2, Damien BOYER3, Hassan HANNACHE2, Omar CHERKAOUI1 , Anouar JAMALI1 and Said GMOUH1,4 1Laboratoire REMTEX, ESITH, Casablanca-Morocco -2Laboratoire LIMAT, Université Hassan II Morocco - 3Laboratoire LMO, chimie-France 4Service d’analyses chimiques Rabat- Morocco
“Process parameters investigation for overbraided textile preforms of commingled yarns” Jean-Vincent RISICATO, Damien SOULAT, Xavier LEGRAND ENSAIT, GEMTEX, France
“Surface Modification of Carbon Fibres using Plasma and Wet Chemical Techniques” Iris KAEPPLER, Rolf-Dieter HUND, Chokri CHERIF Technical University of Dresden, Germany
“Glass fiber content dependent flexural creep behavior of polypropylene composite” Péter BAKONYI, László M. VAS Budapest University of Technology and Economics, Department of Polymer Hungary
“Multifunctional finishing of cotton through plasma-nano technology” Shital S. PALASKAR1 & A. N. DESAI2 The Bombay Textile Research Association, LBS marg Ghatkopar(W) INDIA
“Identifying the most accurate chemical pretreatment of akund floss as preparation for spinning”
Elena STOJANOVSKA 1, Longdi CHENG
2, Qin WANG
1, Xiao JIANG
1 Fan
WENHONG3
1College of Textiles, Donghua University, China; 2 Key Laboratory of Textile Science and Technology, China; 3 3Yunjin Textile Company, China
“Flexible polymer electrode for smart textiles”
Seong HUN KIM1, Dae HEE LIM
1, Yeon JOO CHOI
1, Sung YONG
RYUÉ2
1Department of Organic and Nano Engneering, Hanyang University, Korea
2 Vilene, Pyungteak, Korea
“Development in the 3D multi-axial weaving technology” Ahmad RASHED LABANIEH, Xavier LEGRAND, Vladan KONCAR, Damien SOULAT ENSAIT, GEMTEX, France
17H30 18H30 SESSIONS POSTER PRESENTATIONS
4th ITMC LILLE METROPOLE 2013 INTERNATIONAL CONFERENCE - HTTP://ITMC.ENSAIT.FR/
CONFERENCE PROGRAM
THURSDAY OCTOBER 10th, 2013 09H00 09H30
Opening of the Scientific Conference by Prof. Vladan KONCAR, ENSAIT & Prof. Mohammed LAHLOU, ESITH
09H30 10H30
PLENARY SESSION 3 “Potential of Fibre Based Lightweight Construction in Multi-material Design with Function” Prof. Chokri CHERIF, Dresden University of Technology, Dreseden, Germany
PLENARY SESSION 4 “Textile researches in Canada” Dr. Jacek MLYNAREK, Groupe CTT, Canada
10H30 - 11H00 COFFEE BREAK
11H00 12H30
PARALLEL SESSION 7 MULTIFUNCTIONAL AND INTELLIGENT TEXTILES
Chairman : Vladan KONCAR
PARALLEL SESSION 8 : DESIGN AND CHARACTERIZATION
Chairman : Jacek MLYNAREK
PARALLEL SESSION 9 : RECYCLING & BIOSOURCED TEXTILES
Chairman : Anouar JAMALI “Preparation of Microwave Absorbing Films on Fabrics by Layer-by-Layer Assembly”
Christine CHENH1, Ying MA
2, Yiping QIU
1
1Donghua University, Shanghai, China, 2ENSAIT, GEMTEX, France
“Anti molestation jacket” Noopur ANAND, Nishant PRIYA , Shahzad AHMAD & Deepak PANGHAL NIFT, India.
“Characterization of alfa fibre reinforced polycaprolactone matrix based green composites”
Youssef BENYOUSSIF 1,2
, Omar
CHERKAOUI1, Abdelaziz LALLAM
2
1 ESITH, Morocco, 2 ENSISA, Mulhouse, France
« Ultrasonic welding of technical textile components used in cold weather shoes“ Selin Hanife ERYÜRÜK, Burçak KARAGÜZEL KAYAOĞLU Istanbul Technical University, TURKEY
« Effect of break draft on dynamic drafting force and short term irregularity of carded cotton sliver” Qasim SIDDIQUI, Chongwen YU College of Textiles, Donghua University, China
“Bioconversion efficacy of flocked biofilter media” Yong K. KIM, Armand F. LEWIS UMass Dartmouth, USA
“Antibacterial Properties of functional Polyamide 6.6“ Mehdi EL BOUCHTI
1, Omar
CHERKAOUI1,
Hassan HANNACHE1,2
, Said GMOUH
1,4 Naima HANAFI
3
1Laboratory REMTEX, ESITH, Morocco, 2,3 Faculty of Science Ben Sik, Casablanca, Morocco 4 Laboratoire de Chimie moléculaire, Rabat, Morocco
“Wearable technologies for ppe: embedded textile monitoring sensors, power & data transmission, end-life indicators” Olivier VERMEERSCH, Aldjia BEGRICHE, Justine DECAENS, Dominic LACHAPELLE, Jacek MLYNAREK CTT Group, Canada
“Thermo-mechanical properties of cationic-dyeable chemical recycle poly(ethylene terephthalate) fibers prepared by high-speed in-line drawing process”
Wan-GYU HAHM1 Chun-GI KIM
2, Seong-
YOON PARK2
1Technical Textile Technology Center/Korea (KITECH), 2 Polymer R&D Team, KOREA
“Textile-based capacitors” Carla HERTLEER, Sheilla ODHIAMBO Ugent University, Belgium
“Objective and subjective evaluation of fabric sound” Khaldon YOSOUF, Hadj LATROCH, Dominique C. ADOLPHE, Laurence SCHACHER Université de Haute-Alsace, France
“A novel process for making poymeric alloy fibers from blends of chemically recycled pet and nylon6”
Byung Gil MIN1, Kwang-Sang LEE
12, Mok-
Keon LIM2, Jae-Sung HAN
3
1Kumoh National Institute of Technology, Korea, 2 Solvay Engineering Plastics, Seoul, Korea, 3 Korea Textile Development Institute, Deagu, Korea
“Dyeing properties of recycled pet as compared with regular pet”
Seokhan YOON1, Jinpyo HONG
1, Chando
JUNG2, Hunju AN
1
1R&D Division, DYETEC Institute, Daegu, Korea 2 SAMHWAN DYEING CO.,LTD, Korea
12H30 - 14H00 LUNCH BREAK
4th ITMC LILLE METROPOLE 2013 INTERNATIONAL CONFERENCE - HTTP://ITMC.ENSAIT.FR/
CONFERENCE PROGRAM
14H00 15H30
PARALLEL SESSION 10 MULTIFUNCTIONAL AND INTELLIGENT TEXTILES THERMOREGULATION AND FLAME RETARDANCY
Chairman : Vladan KONCAR
PARALLEL SESSION 11 DESIGN AND CHARACTERIZATION
Chairman : Seong HUN KIM
PARALLEL SESSION 12 : RECYCLING & BIOSOURCED TEXTILES
BIOCOMPALFA PROJECT
Chairman : Philippe VROMAN
“Development of thermo-regulating fabric using Microcapsules of phase change material (PCM)”, Dounia BENMOUSSA
1,2, Hassan
HANNACHE2, O. CHERKAOUI
1
1Laboratory REMTEX, Casablanca, Morocco - 2University Hassan II, F. S. Ben M’Sik,, Morocco
“The weave designs final colour prediction
Wafa MILED1, Sofien BENLTOUFA
2
1 LPBMO, Science Faculty, Monastir University, Tunisia ,2 LESTE, National School of Engineers of Monastir(ENIM), Monastir University, Tunisia
“Introduction to Biocompalfa project” Philippe VROMAN ENSAIT, GEMTEX, France
“How to protect textile materials against fire?” Mathilde CASETTA, Maude JIMENEZ, Sophie DUQUESNE and Serge BOURBIGOT ENSC Villeneuve d’Ascq, France
“Design methodology and performance studies of a flexible electrotextile surface”
Ozan KAYACAN1, Özlem KAYACAN
1, Ender
BULGUN2, Burçin ESER
3, Maşuk PAMUK
3
1Dokuz Eylül University, Textile Eng. Dept Turkey , 2Izmir University of Economics, Faculty of Fine Arts & Design, Turkey, 3Uniteks Textile Company,Turkey
“Potential for extracting fibers from exotic plants located in the Mediterranean area”Esparto (Stipa tenacissima L.) Reed (Arundo donax), Palm tree (Chamaerops humilis L.), etc Meriem HARCHE-KAID USTOMB
“Ultimate Protection & Less Heat Stress - Next Generation of innovative Fire Fighter Outershell Materials” Alexander GSTETTNER Lenzing AG, Austria
“Apparatus for measuring the shear properties of reinforcements Kolos MOLNAR, Marianna HALÁSZ, László M. VAS Budapest University of Technology and Economics, Polymer Engineering, Hungary
“Effect of biotechnological-ecotechnological-chemical treatments on natural fiber properties” Usha MASSIKA ENSAIT, GEMTEX, France
“Perception gap between vendors & buying agencies in the apparel industry”
Archana GANDHI1, Sunil SHARMA
2
1 NIFT, India, 2 Faculty of Management Studies,
University of Delhi, India.
« Advancements in the Man-in-simulant-test for chemical and biological protective ensembles” R. Bryan ORMOND, Roger BARKER, Center for Research on Textile Protection and Comfort (TPACC), North Carolina State University, USA
“Functionalization of vegetable oils dedicated to the elaboration of bio-sourced composite matrices: application to the development of polyurethane resins” Fouad MALEK UMPO
15H30 - 16H00 COFFEE BREAK
16H00 17H30
PARALLEL SESSION 13 DESIGN AND CHARACTERIZATION
Chairman : Maryline ROCHERY
PARALLEL SESSION 14 RECYCLING & BIOSOURCED TEXTILES
BIOCOMPALFA PROJECT
Chairman : Vladan KONCAR
“How Modern Systems-Level Test Methods Can Impact Firefighter Suit and Glove Design” Roger BARKER, Alexander HUMMEL, Kevin ROSS and Anthoney SHAWN DEATON Center for Research on Textile Protection and Comfort (TPACC), North Carolina State University, USA
“Filament spinning and functionalization of bio-sourced polymers for advanced properties: starch-based Polylactic acid, castor oil-based polyamide 11, sugar can-based polyethylene…” Aurélie CAYLA ENSAIT, GEMTEX, France
“Advances in Manikin Technology and Methodology for Testing Thermal Protective Clothing in Fire Environments” Alexander HUMMEL, Roger BARKER Center for Research on Textile Protection and Comfort (TPACC), North Carolina State University, USA
“Implementation of various bio-sourced polymers and plant fibers for the development of nonwoven-based composite materials obtained via compression molding: study of mechanical and acoustical behaviors”
“Impact of the weaving structure on thermal and mass transfer in view of the development of heat flow-metric textile sensor”
Hayriye GIDIK1,2
, Gauthier BEDEK1, Daniel DUPONT
1 1 HEI,
GEMTEX, France 2 Univ Lille Nord de France, FRANCE
Bernard VERMEULEN ENSAIT, GEMTEX, France
17H30 - 18H30 VISIT OF ENSAIT
19H30 - 23H30 CONFERENCE GALA DINNER