16
Conduit & Fittings Product Catalogue

Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

  • Upload
    others

  • View
    8

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

Conduit & FittingsProduct Catalogue

Page 2: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

WELCOME TO THE NEW RANGE OF CONDUIT & FITTINGSDETA TTE is the new brand name of market leading companies Top Tubes Electrical and Stephen Glover, both established British suppliers of conduit tube and accessories with over 50 years experience in supplying the UK and worldwide markets.

DETA TTE incorporates the existing product ranges and renowned quality attributes of both Top Tubes Electrical and Stephen Glover, enabling you to order all your conduit tube and fittings from a single reputable souce - DETA TTE.

Our stock policy and commitment to service will ensure our conduit tube and fittings are always available for rapid despatch.

SALES SUPPORT

Whether you are a wholesaler, contractor, engineer, specifier or end user, our nationwide sales team is always on hand to help you with product selection. If you need assistance, give us a call on 01582 544 544(DETA TTE - Luton) or 01582 544 300 (DETA TTE - Oldbury).

TECHNICAL SUPPORT

Whether it is installation advice, problem solving or technical issues, call our Technical Support Line on 01582 544 548. A team of dedicated engineers is on hand to help answer your queries and resolve any issues.

QUALITY ASSURED

DETA TTE is an ISO 9001 accredited organisation. All our manufacturing is managed in a strict quality controlled environment. Our products are designed to a high specification to meet the relevant British and European Standards.

DETA TTE is also registered to ISO14001:2004 Environmental Management Systems.

Telephone: +44 (0)1582 544 544 Email: [email protected]

Page 3: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

Introduction .............................................................1

Quality .....................................................................1

Class 4 Galvanised Conduit Tube ................................3

Boxes (Malleable)

Terminal Boxes ....................................................5

Through Boxes ....................................................5

Tee Boxes ............................................................5

Angle Boxes ........................................................6

Intersection Boxes ...............................................6

U Boxes ...............................................................6

Y Boxes ...............................................................6

H Boxes ..............................................................6

Loop In Boxes (Malleable and Steel)

1, 2, 3 and 4 Hole Boxes .....................................6

Extension Rings

Solid Couplers ..........................................................7

Earthing Couplers ....................................................7

Flanged Couplers .....................................................7

Solid Bends ..............................................................7

Inspection Bends ......................................................7

Solid Elbows .............................................................7

Inspection Elbows ....................................................7

Solid Tees .................................................................7

Inspection Tees .........................................................7

Suspension Hooks & Loop ........................................7

Box Lids and Gaskets ...............................................8

Female Dome Cover .................................................8

Ball & Socket Cover ..................................................8

Hookplates ...............................................................8

Nipples .....................................................................8

Adaptors ..................................................................8

Reducers ..................................................................8

Hex Plugs .................................................................8

Jack Chain ................................................................8

Brass Bush Male ......................................................9

Brass Bush Female ...................................................9

Brass Slotted Plugs ...................................................9

Brass TRS Glands......................................................9

Earth Terminal ..........................................................9

Locknuts and Lockrings ............................................9

Saddles ..................................................................10

Crampets ...............................................................10

Adaptable Boxes ....................................................11

Stocks, Dies, Guides and Conduit Bender ...............11

CONTENTS

2Telephone: +44 (0)1582 544 544 Email: [email protected]: +44 (0)1582 544 544 Email: [email protected]

Page 4: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

Telephone: +44 (0)121 506 1084 Email: [email protected]

Deta TTE steel conduit is suitable for use in demanding environments. It exceeds the maximum “very heavy” strength classification and can be easily formed on site.

Our conduit is hot dipped galvanised after manufacture to comply with Class 4, heavy protection inside and out. Galvanising is undertaken on a purpose made plant to ensure an even coating and employs a final superheated steam blast to ensure the bore is smooth and clear of defects which might damage cable installation.

Class 4 Galvanised Conduit Tube

Technical Specification and Standards

Material Made from Grade Q195 Steel.

Manufacturing Process Tubes are roll formed, and electrical resistance welded.

Resistance against corrosion Hot dipped galvanised to BS EN 61386 Class 4 using a specialist superheated steam blast to ensure the bore is smooth and clear of defects that might damage cables during installation.

Resistance to compression Tested to very heavy grade - Classification 5.

Resistance to impact Tested to very heavy grade - Classification 5.

Tensile strength Tested to very heavy grade - Classification 5.

Standard BS 4568 -1 Steel Conduit and fittings with metric threads

Standard BS EN 61386 - 21 Conduit systems for cable management - requirements for rigid conduit systems

Storage Galvanised conduit should be stored in dry conditions to prevent wet storage stain. (Should this occur, it can easily be removed and is unlikely to affect resistance to corrosion)

Telephone: +44 (0)1582 544 544 Email: [email protected]

Page 5: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

Telephone: +44 (0)121 506 1084 Email: [email protected] 44

• Hot dipped galvanised inside and out to Class 4• Ink Jet marked• Threaded at both ends • Each length supplied with one coupler and one plastic thread protector cap• Available in two sizes and two lengths • Conforms to BS EN 61386

• Hot dipped galvanised inside and out to Class 4• Hard stamped during manufacturing process• Threaded at both ends • Each length supplied with one coupler and one plastic thread protector cap• Available in three sizes • Conforms to BS 4568 and BS EN 61386

BS EN 61386Class 4 Conduit

BS 4568 andBS EN 61386 Class 4 Conduit

Catalogue Code External Diameter Length Length per master bundle

Metres per master bundle Length per small bundle

DT2030020mm

3.00m 400 1200 8

DT20375 3.75m 400 1500 8

DT2530025mm

3.00m 240 720 8

DT25375 3.75m 240 900 8

Conduit Tube A range of high quality conduit tube for cablemanagement, offering a high level of mechanical strength

4Telephone: +44 (0)1582 544 544 Email: [email protected]: +44 (0)1582 544 544 Email: [email protected]

Catalogue Code External Diameter Length Length per master bundle

Metres per master bundle Length per small bundle

DTS20375 20mm 3.75m 400 1500 8

DTS25375 25mm 3.75m 240 900 8

DTS32375 32mm 3.75m 100 375 4

Other sizes and BS 31 (imperial) steel conduit available on request

Page 6: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

Terminal Box (1 Way)

Cat. Code Size Pk QtyDT21120G 20mm 10 DT21125G 25mm 10DT21132G 32mm 5

Through & Back Outlet Box

Cat. Code Size Pk QtyDT22320G 20mm 10 DT22325G 25mm 10

Terminal Extension Box

Cat. Code Size Pk QtyDT21220G 20mm 10 DT21225G 25mm 10

Tee Box (3 Way)

Cat. Code Size Pk QtyDT23120G 20mm 10 DT23125G 25mm 10DT23132G 32mm 5

Terminal & Back Outlet Box

Cat. Code Size Pk QtyDT21320G 20mm 10 DT21325G 25mm 10

Tee Extension Box

Cat. Code Size Pk QtyDT23220G 20mm 10 DT23225G 25mm 10

Back Outlet Box

Cat. Code Size Pk QtyDT21420G 20mm 10 DT21425G 25mm 10

Tee & Back Outlet Box

Cat. Code Size Pk QtyDT23320G 20mm 10 DT23325G 25mm 10

Through Box (2 Way)

Cat. Code Size Pk QtyDT22120G 20mm 10 DT22125G 25mm 10DT22132G 32mm 5

Tangent Tee Box

Cat. Code Size Pk QtyDT23420G 20mm 10 DT23425G 25mm 10

Through Extension Box

Cat. Code Size Pk QtyDT22220G 20mm 10 DT22225G 25mm 10

Boxes (Malleable)

• 20/25mm Boxes - Cover fixings M4 at 50.8mm centres• 32mm Boxes - Cover fixings M4 at 71.5mm centres• 20mm boxes - Internal depth 25mm minimum• 25mm boxes - Internal depth 28mm minimum• 32mm boxes - Internal depth 37mm minimum

5

• Tapped M4 hole for earth terminal in base• Manufactured to BS 4568 and BS EN 61386• Boxes are galvanised after manufacture and meet the most

demanding Class 4 corrosion protection standard.

Telephone: +44 (0)1582 544 544 Email: [email protected]

Page 7: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

Angle Box

Cat. Code Size Pk QtyDT25120G 20mm 10 DT25125G 25mm 10DT25132G 32mm 5

Intersection & Back Outlet Box

Cat. Code Size Pk QtyDT24320G 20mm 10 DT24325G 25mm 10

Angle Extension Box

Cat. Code Size Pk QtyDT25220G 20mm 10

Branch 2 Way Box (U)

Cat. Code Size Pk QtyDT26120G 20mm 10 DT26125G 25mm 10

Angle & Back Outlet Box

Cat. Code Size Pk QtyDT25320G 20mm 10 DT25325G 25mm 10

Branch 3 Way Box (Y)

Cat. Code Size Pk QtyDT26220G 20mm 10 DT26225G 25mm 10

Tangent Angle Box

Cat. Code Size Pk QtyDT25420G 20mm 10 DT25425G 25mm 10

Branch 4 Way (H)

Cat. Code Size Pk QtyDT26420G 20mm 10 DT26425G 25mm 10

Intersection Box (4 Way)

Cat. Code Size Pk QtyDT24120G 20mm 10 DT24125G 25mm 10DT24132G 32mm 5

Loop- In Boxes (Malleable)

Cat. Code Size Pk QtyDT27001 1 Hole 10 DT27002 2 Hole 10DT27003 3 Hole 10DT27004 4 Hole 10

Intersection Extension Box

Cat. Code Size Pk QtyDT24220G 20mm 10 DT24225G 25mm 10

Loop- In Boxes (Pressed Steel)

Cat. Code Size Pk QtyDT30001 1 Hole 10DT30002 2 Hole 10DT30003 3 Hole 10DT30004 4 Hole 10DT30005 4 Hole KO 10

Boxes (Malleable)

• 20/25mm Boxes - Cover fixings M4 at 50.8mm centres• 32mm Boxes - Cover fixings M4 at 71.5mm centres• 20mm boxes - Internal depth 25mm minimum• 25mm boxes - Internal depth 28mm minimum• 32mm boxes - Internal depth 37mm minimum

• Tapped M4 hole for earth terminal in base• Manufactured to BS 4568 and BS EN 61386• Boxes are galvanised after manufacture and meet the most

demanding Class 4 corrosion protection standard.

6Telephone: +44 (0)1582 544 544 Email: [email protected]: +44 (0)1582 544 544 Email: [email protected]

Page 8: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

755

Extension Rings, Couplers & Bends

5

Extension Rings (Steel)

Cat. Code Size Pk QtyDT31006Z 6mm 25 DT31013Z 13mm 25 DT31016Z 16mm 25 DT31020Z 20mm 25 DT31025Z 25mm 25 DT31032Z 32mm 25 DT31038Z 38mm 10 DT31050Z 50mm 10

Couplers (Malleable)

Cat. Code Size Pk QtyDT31120G 20mm 25 DT31125G 25mm 25 DT31132G 32mm 25 DT31138G 1.5” 10DT31150G 2” 10

Earth Couplers (Malleable)

Cat. Code Size Pk QtyDT31220G 20mm 25 DT31225G 25mm 25

Flanged Couplers (Malleable)

Cat. Code Size Pk QtyDT31320G 20mm 25 DT31325G 25mm 25 DT31332G 32mm 25

Solid Bends (Steel)

Cat. Code Size Pk QtyDT31420Z 20mm 10 DT31425Z 25mm 10 DT31432Z 32mm 10

Inspection Bends (Malleable)

Cat. Code Size Pk QtyDT31520G 20mm 10 DT31525G 25mm 10 DT31532G 32mm 10

Solid Elbows (Malleable)

Cat. Code Size Pk QtyDT31620G 20mm 10 DT31625G 25mm 10 DT31632G 32mm 10

Inspection Elbows (Malleable)

Cat. Code Size Pk QtyDT31720G 20mm 10 DT31725G 25mm 10 DT31732G 32mm 10

Solid Tees (Malleable)

Cat. Code Size Pk QtyDT31820G 20mm 10 DT31825G 25mm 10

Inspection Tees (Malleable)

Cat. Code Size Pk QtyDT31920G 20mm 10 DT31925G 25mm 10 DT31932G 32mm 10

Suspension Hooks & Loops

Cat. Code Size Pk QtyDT32020G 20mm Hook 10 DT32025G 25mm Hook 10 DT32120G 20mm Loop 10

• Galvanised after manufacture and meets the most demanding Class 4 corrosion protection standard

Telephone: +44 (0)1582 544 544 Email: [email protected]

Page 9: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

866

Box Lid & Gasket - 20 & 25mm Boxes

Cat. Code Size Pk QtyDT32201G Light, 2 Hole 25DT32202G Overlapping 25 DT32203G Heavy, 2 Hole 25DT32301 Gasket 25

Box Lid & Gasket - 32mm Boxes

Cat. Code Size Pk QtyDT32204G Light, 4 Hole 25 DT32205G Heavy, 4 Hole 25 DT32302 Gasket 25

Female Dome Covers - Malleable

Cat. Code Size Pk QtyDT32420G 20mm 25 DT32425G 25mm 25

Ball & Socket Cover - Malleable

Cat. Code Size Pk QtyDT32520G 20mm 25

Hookplates - Pre Galvanised

Cat. Code Size Pk QtyDT32620G 20mm 25

Standard Steel Nipples - Zinc Plated

Cat. Code Size Pk QtyDT32720Z 20mm 25 DT32725Z 25mm 25 DT32732Z 32mm 25 DT32738Z 1.5” 10DT32750Z 2” 10

300mm Long Steel Nipples- Zinc Plated

Cat. Code Size Pk QtyDT32820Z 20mm 10 DT32825Z 25mm 10 DT32832Z 32mm 10 DT32838Z 1.5” 10

Adaptors - Zinc Plated

Cat. Code Size Pk QtyDT32901Z 3/4”M x 20mm F 10 DT32902Z 20mm M x 3/4” F 10DT32903Z 1” M x 25mm F 10 DT32904Z 25mm m x 1’ F 10

Screwed Reducers - Zinc Plated

Cat. Code Size Pk QtyDT3302016Z 20 x 16mm 25 DT3302520Z 25 x 20mm 25DT3303220Z 32 x 20mm 25DT3303225Z 32 x 25mm 25DT3303820Z 1.5” x 20mm 10 DT3303825Z 1.5” x 25mm 10DT3303832Z 1.5” x 32mm 10 DT3305025Z 2” x 25mm 10DT3305032Z 2” x 32mm 10 DT3305038Z 2” x 1.5” 10

Hex Plugs - Zinc Plated

Cat. Code Size Pk QtyDT33116Z 16mm 25 DT33120Z 20mm 25 DT33125Z 25mm 25 DT33132Z 32mm 25 DT33138Z 1.5” 25 DT33150Z 2” 25

Jack Chain - Pre Galvanised

Cat. Code Size Pk QtyDT33210G No 10 10m

Covers, Nipples & Adaptors

• Ball and Socket cover have earth link wire

8

Extension Rings, Couplers & Bends

Telephone: +44 (0)1582 544 544 Email: [email protected]: +44 (0)1582 544 544 Email: [email protected]

Page 10: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

Male Brass Bush - Short

Cat. Code Size Pk QtyDT40120 20mm 25 DT40125 25mm 25DT40132 32mm 25DT40138 1.5” 10DT40150 2” 10

Brass Earth Terminal

Cat. Code Size Pk QtyDT40604 M4 25

Male Brass Bush - Long

Cat. Code Size Pk QtyDT40220 20mm 25 DT40225 25mm 25DT40232 32mm 25DT40238 1.5” 10DT40250 2” 10

Light Steel Locknuts - Zinc Plated

Cat. Code Size Pk QtyDT33320Z 20mm 50 DT33325Z 25mm 50DT33332Z 32mm 25DT33338Z 1.5” 10DT33350Z 2” 10

Female Brass Bush

Cat. Code Size Pk QtyDT40320 20mm 25 DT40325 25mm 25DT40332 32mm 25DT40338 1.5” 10DT40350 2” 10

Heavy Steel Locknuts - Zinc Plated

Cat. Code Size Pk QtyDT33420Z 20mm 25 DT33425Z 25mm 25DT33432Z 32mm 25DT33438Z 1.5” 10DT33450Z 2” 10

Brass Slotted Plugs

DT40420 20mm 25 DT40425 25mm 25DT40432 32mm 25DT40438 1.5” 10DT40450 2” 10

Milled Edge Lockrings - Zinc Plated

Cat. Code Size Pk QtyDT33520Z 20mm 50 DT33525Z 25mm 50DT33532Z 32mm 25DT33538Z 1.5” 10DT33550Z 2” 10

9 Telephone: +44 (0)1582 544 300 Email: [email protected]

Bushes, Locknuts & Lockrings

Brass TRS Glands

Cat. Code Size Gland Pk Qty Hole oDT40520G 20mm 7.5mm 25 DT40525G 25mm 11.5mm 25DT40532G 32mm 14.5mm 25

Telephone: +44 (0)1582 544 544 Email: [email protected]

Page 11: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

106

Saddles & Crampets

Half Saddles - Zinc Plated

Cat. Code Size Pk QtyDT33820Z 20mm 25 DT33825Z 25mm 25DT33832Z 32mm 25

Steel Crampets - Zinc plated

Cat. Code Size Pk QtyDT33620Z 20mm 50 DT33625Z 25mm 50

Steel Saddles - Zinc Plated

Cat. Code Size Pk QtyDT33920Z 20mm 25 DT33925Z 25mm 25DT33932Z 32mm 25DT33938Z 1.5” 10DT33950Z 2” 10

Twisted Steel Crampets- Zinc Plated

Cat. Code Size Pk QtyDT33720Z 20mm 50 DT33725Z 25mm 50

Spacer Bar Saddles - Zinc Plated

Cat. Code Size Pk QtyDT34020 20mm 25 DT34025 25mm 25DT34032 32mm 25DT34038 1.5” 10DT34050 2” 10

Heavy Distance Saddles - Malleable

Cat. Code Size Pk QtyDT34120G 20mm 25 DT34125G 25mm 25 DT34132G 32mm 25

Hospital Saddles - Malleable

Cat. Code Size Pk QtyDT34220G 20mm 50 DT34225G 25mm 50DT34232G 32mm 25

10Telephone: +44 (0)1582 544 544 Email: [email protected]: +44 (0)1582 544 544 Email: [email protected]

Page 12: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

Adaptable Boxes - Plain

Cat. Code Size Pk QtyDT502332G 3” x 3” x 2” (75 x 75 x 50mm) 1DT502442G 4” x 4” x 2” (100 x 100 x 50mm) 1DT502443G 4” x 4” x 3” (100 x 100 x 75mm) 1DT502662G 6” x 6” x 2” (150 x 150 x 50mm) 1DT502663G 6” x 6” x 3” (150 x 150 x 75mm) 1 DT502664G 6” x 6” x 4” (150 x 150 x 100mm) 1DT502994G 9” x 9” x 4” (225 x 225 x 100mm) 1DT50212124G 12” x 12” x 4” (300 x 300 x 100mm) 1

5

Adaptable Boxes

Adaptable Boxes - Knock Out

Cat. Code Size Pk QtyDT501332G 3” x 3” x 2 (75 x 75 x 50mm) 1DT501442G 4” x 4” x 2” (100 x 100 x 50mm) 1DT501443G 4” x 4” x 3” (100 x 100 x 75mm) 1DT501662G 6” x 6” x 2” (150 x 150 x 50mm) 1DT501663G 6” x 6” x 3” (150 x 150 x 75mm) 1 DT501664G 6” x 6” x 4” (150 x 150 x 100mm) 1DT501994G 9” x 9” x 4” (225 x 225 x 100mm) 1DT50112124G 12” x 12” x 4” (300 x 300 x 100mm) 1

Stocks, Dies, Guides and Conduit BenderStocks, Dies & Guides

Cat. Code Size Pk QtyDT6012025 20mm x 25mm 1 DT60132 32mm 1

Stocks

Cat. Code Size Pk QtyDT6022025 20mm x 25mm 1 DT60232 32mm 1

Dies

Cat. Code Size Pk QtyDT60320 20mm 1 DT60325 25mm 1DT60332 32mm 1

Guides

Cat. Code Size Pk QtyDT60420 20mm 1 DT60425 25mm 1DT60432 32mm 1

Conduit Bender

Cat. Code Size Pk QtyDT615 20, 25, 32mm 1

• Available with plain sides or knockouts• Knockouts are 20/25mm combination• Manufactured from pre-galvanised steel

Telephone: +44 (0)1582 544 544 Email: [email protected]

Width of Side No of KO’s Per Side

2” 2

3” 2

4” 2

6” 4

9” 6

12” 8

Page 13: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

126

New DETA TTE Code Lookup

12Telephone: +44 (0)1582 544 544 Email: [email protected]: +44 (0)1582 544 544 Email: [email protected]

Width of Side No of KO’s Per Side

2” 2

3” 2

4” 2

6” 4

9” 6

12” 8

Deta TTECatalogue Code

VergloCatalogue Code

Top TubesCatalogue Code Page No

CONDUIT BOXES (MALLEABLE)DT21120G V12820G T1W20G 5

DT21125G V12825G T1W25G 5

DT21132G V14532G T1W32G 5

DT21220G V130A1G T1EXT20G 5

DT21225G V130A125G T1EXT25G 5

DT21320G V13520G T1WBO20G 5

DT21325G V13525G T1WBO25G 5

DT21420G V12920G TBO20G 5

DT21425G V12925G TB025G 5

DT22120G V13020G T2W20G 5

DT22125G V13025G T2W25G 5

DT22132G V14732G T2W32G 5

DT22220G V130A2G T2EXT20G 5

DT22225G V130A225G T2EXT25G 5

DT22320G V13620G T2WBO20G 5

DT22325G V13625G T2WBO25G 5

DT23120G V13320G T3W20G 5

DT23125G V13325G T3W25G 5

DT23132G V14932G T3W32G 5

DT23220G V130A3G T3EXT20G 5

DT23225G V130A325G T3EXT25G 5

DT23320G V13720G T3WBO20G 5

DT23325G V13725G T3WBO25G 5

DT25120G V13120G TANG20G 6

DT25125G V13125G TANG25G 6

DT25132G V14832G N/A 6

DT25220G V130AAG TANGEXT20G 6

DT23420G V132A20G TTANT20G 5

DT23425G V132A25G TTANT25G 5

DT25320G V136A20G TANGBO20G 6

DT25325G V136A25G TANGBO25G 6

DT25420G V13220G TTANT20G 6

DT25425G V13225G TTANT25G 6

DT24120G V13420G T4W20G 6

DT24125G V13425G T4W25G 6

DT24132G V15032G N/A 6

DT24220G V130A4G N/A 6

DT24225G V130A425G N/A 6

DT24320G V13820G N/A 6

DT24325G V13825G N/A 6

DT26120G V131A20G TU20G 6

Deta TTECatalogue Code

VergloCatalogue Code

Top TubesCatalogue Code Page No

CONDUIT BOXES (MALLEABLE) - continuedDT26125G V131A25G TU25G 6

DT26220G V133A20G TY20G 6

DT26225G V133A25G TY25G 6

DT26420G V134A20G TH20G 6

DT26425G V134A25G N/A 6

DT27001 V160M1G TLBM1G 6

DT27002 V160M2G TLBM2G 6

DT27003 V160M3G TLBM3G 6

DT27004 V160M4G TLBM4G 6

DT30001 V9221Z T1HLIBG 6

DT30002 V9222Z T2HLIBG 6

DT30003 V9223Z T3HLIBG 6

DT30004 V9224Z T4HLIBG 6

DT30005 V922KOZ N/A 6

EXTENSION RINGS,COUPLERS & BENDSDT31006Z V1406Z N/A 7

DT31013Z V14013Z TEXTR13Z 7

DT31016Z V14016Z TEXTR16Z 7

DT31020Z V14020Z TEXTR20Z 7

DT31025Z V14025Z TEXTR25Z 7

DT31032Z V14032Z TEXTR32Z 7

DT31038Z V14038Z TEXTR38Z 7

DT31050Z V14050Z TEXTR50Z 7

DT31120G V10120G TCPL20G 7

DT31125G V10125G TCPL25G 7

DT31132G V10132G TCPL32G 7

DT31138G V10138G TCPL11/2G 7

DT31150G V10150G TCPL2G 7

DT31220G V10520G TEC20G 7

DT31225G V10525G TEC25G 7

DT31320G V10920G TFC20G 7

DT31325G V10925G TFC25G 7

DT31332G V10932G TFC32G 7

DT31420Z V12020Z TSBEN20Z 7

DT31425Z V12025Z TSBEN25Z 7

DT31432Z V12032Z TSBEN32Z 7

DT31520G V12320G TINSPB20G 7

DT31525G V12325G TINSPB25G 7

DT31532G V12332G N/A 7

DT31620G V11020G TS20G 7

Deta TTE file for import to cat:Layout 1 21/12/12 11:14 Page 1

Page 14: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

New DETA TTE Code Lookup

Telephone: +44 (0)1582 544 544 Email: [email protected]

Deta TTECatalogue Code

VergloCatalogue Code

Top TubesCatalogue Code Page No

EXTENSIONRINGS,COUPLERS&BENDS (MALLEABLE)DT31625G V11025G TS25G 7

DT31632G V11032G N/A 7

DT31720G V11120G TINSPE20G 7

DT31725G V11125G TINSPE25G 7

DT31732G V11132G N/A 7

DT31820G V11520G TSTG20G 7

DT31825G V11525G TSTG25G 7

DT31920G V11620G TINSPT20G 7

DT31925G V11625G TINSPT25G 7

DT31932G V11632G N/A 7

DT32020G V12520G TMH20G 7

DT32025G V12525G N/A 7

DT32120G V12720G TMN20G 7

COVERS, NIPPLES &ADAPTORSDT32201G V141G TLIDG 8

DT32202G V141OLG N/A 8

DT32203G V142G N/A 8

DT32301 V144AS TRG 8

DT32204G V141LG TLILDG 8

DT32205G V141HSG N/A 8

DT32302 V144ALS N/A 8

DT32420G V76120G TDC20G 8

DT32425G V76125G TDC25G 8

DT32520G V76220G N/A 8

DT32620G V758G THPZ 8

DT32720Z V10820Z TNP20Z 8

DT32725Z V10825Z TNP25Z 8

DT32732Z V10832Z TNP32Z 8

DT32738Z V10838Z N/A 8

DT32750Z V10850Z N/A 8

DT32820Z V108203Z N/A 8

DT32825Z V108253Z N/A 8

DT32832Z V108323Z N/A 8

DT32838Z V108383Z N/A 8

DT32901Z V100S3/4Z TA34M20FZ 8

DT32902Z V100S20Z TA20M34FZ 8

DT32903Z V100S1Z TA1M25FZ 8

DT32904Z V1002S25Z TA25M1FZ 8

DT3302016Z V7482016Z TRED2016G 8

DT3302520Z V7482520Z TRED2520G 8

Deta TTECatalogue Code

VergloCatalogue Code

Top TubesCatalogue Code Page No

COVERS, NIPPLES &ADAPTORS - continuedDT3303220Z V7483220Z TRED3220G 8

DT3303225Z V7483225Z TRED3225G 8

DT3303820Z V7483820Z N/A 8

DT3303825Z V7483825Z N/A 8

DT3303832Z V7483832Z N/A 8

DT3305025Z V7485025Z N/A 8

DT3305032Z V7485032Z N/A 8

DT3305038Z V7485038Z N/A 8

DT33116Z V75016Z THXPOG16Z 8

DT33120Z V75020Z THXPLG20Z 8

DT33125Z V75025Z THXPLG25Z 8

DT33132Z V75032Z THXPLG32Z 8

DT33138Z V75038Z N/A 8

DT33150Z V75050Z N/A 8

DT33210G V86310G N/A 8

BUSHES, LOCKNUTS, & LOCKRINGSDT40120 V78020S TMBBS20 9

DT40125 V78025S TMBBS25 9

DT40132 V78032S TMBBS32 9

DT40138 V78038S TMBBS38 9

DT40150 V78050S TMBBS50 9

DT40220 V78020L TMBBL20 9

DT40225 V78025L TMBBL25 9

DT40232 V78032L TMBBL32 9

DT40238 V78038L TMBBL38 9

DT40250 V78050L TMBB50L 9

DT40320 V78120 TFBB20 9

DT40325 V78125 TFBB25 9

DT40332 V78132 TFBB32 9

DT40338 V78138 TFBB38 9

DT40350 V78150 TFBB50 9

DT40420 V78520 TBSPLG20 9

DT40425 V78525 TBSPLG25 9

DT40432 V78532 N/A 9

DT40438 V78538B N/A 9

DT40450 V78550B N/A 9

DT40520 V77620 TTRS20 9

DT40525 V77625 TTRS25 9

DT40532 V77632 TTRS32 9

DT40604 V799M4 N/A 9

Deta TTE file for import to cat:Layout 1 21/12/12 11:17 Page 2

Page 15: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

14

New DETA TTE Code Lookup

Telephone: +44 (0)1582 544 544 Email: [email protected]

Deta TTECatalogue Code

VergloCatalogue Code

Top TubesCatalogue Code Page No

BUSHES, LOCKNUTS, & LOCKRINGS - continuedDT33320Z V76320Z TLNUT20Z 9

DT33325Z V76325Z TLNUT25Z 9

DT33332Z V76332Z TLNUT32Z 9

DT33338Z V76338Z TLNUT11/2Z 9

DT33350Z V76350Z TLNUT2Z 9

DT33420Z V76420Z TLNUTH20Z 9

DT33425Z V76425Z TLNUTH25Z 9

DT33432Z V76432Z N/A 9

DT33438Z V76438Z N/A 9

DT33450Z V76450Z N/A 9

DT33520Z V76520Z TML20Z 9

DT33525Z V76525Z TML25Z 9

DT33532Z V76532Z TML32Z 9

DT33538Z V76538Z TML11/2Z 9

DT33550Z V76550Z TML2Z 9

SADDLES & CRAMPETSDT33620Z V75720Z TCRAM20Z 10

DT33625Z V75725Z TCRAM25Z 10

DT33720Z V75720TZ N/A 10

DT33725Z V75725TZ N/A 10

DT33820Z V75220Z THS20G 10

DT33825Z V75225Z THS25G 10

DT33832Z V75232Z N/A 10

DT33920Z V75320Z TCS20Z 10

DT33925Z V75325Z TCS25Z 10

DT33932Z V75332Z TCS32Z 10

DT33938Z V75338Z N/A 10

DT33950Z V75350Z N/A 10

DT34020Z V75420Z TSBS20Z 10

DT34025Z V75425Z TSBS25Z 10

DT34032Z V75432Z TSBS32Z 10

DT34038Z V75438Z N/A 10

DT34050Z V75450Z N/A 10

DT34120G V75520G THD20G 10

Deta TTECatalogue Code

VergloCatalogue Code

Top TubesCatalogue Code Page No

SADDLES & CRAMPETS - continuedDT34125G V75525G THDS25G 10

DT34132G V75532G THDS32G 10

DT34220G V75620G THPS20G 10

DT34225G V75625G THPS25G 10

DT34232G V75632G N/A 10

ADAPTABLE BOXESDT501332G V913KO332G TADB332KOG 11

DT501442G V913KO442G TADB442KOG 11

DT501443G V913KO443G TADB443KOG 11

DT501662G V913KO662G TADB662KOG 11

DT501663G V913KO663G TADB663KOG 11

DT501664G V913KO664G TADB664KOG 11

DT501994G V913KO994G TADB994KOG 11

DT50112124G V913KO12124G N/A 11

DT502332G V913P332G TADB332PG 11

DT502442G V913P442G TADB442PG 11

DT502443G V913P443G TADB443PG 11

DT502662G V913P662G TADB662PG 11

DT502663G V913P663G TADB663PG 11

DT502664G V913P664G TADB664PG 11

DT502994G V913P994G TADB994PG 11

DT50212124G V913P12124G N/A 11

STOCK, DIES & GUIDESDT6012025 V86020/25 TSDG20/25 11

DT60132 V86032 N/A 11

DT6022025 V860S42 TS42 11

DT60232 V860S63 N/A 11

DT60320 V860D20 TD20 11

DT60325 V860D25 TD25 11

DT60332 V860D32 N/A 11

DT60420 V860G20 TG20 11

DT60425 V860G25 TG25 11

DT60432 V860G32 N/A 11

DT615 N/A N/A 11

Deta TTECatalogue Code

VergloCatalogue Code

Top TubesCatalogue Code Description Length Per Bundle

CONDUITDT20300 N/A N/A 20mm x 3m Class 4 Conduit Tube GV 4

DT20375 N/A N/A 20mm x 3.75m Class 4 Conduit Tube GV 4

DT25300 N/A N/A 25mm x 3m Class 4 Conduit Tube GV 4

DT25375 N/A N/A 25mm x 3.75m Class 4 Conduit Tube GV 4

DTS20375 N/A TS204375 20mm x 3.75m Class 4 Conduit Tube GV 4

DTS25375 N/A TS254375 25mm x 3.75m Class 4 Conduit Tube GV 4

DTS32375 N/A TS324375 32mm x 3.75m Class 4 Conduit Tube GV 4

Deta TTE file for import to cat:Layout 1 21/12/12 11:31 Page 3New DETA TTE Code Lookup

Deta TTECatalogue Code

VergloCatalogue Code

Top TubesCatalogue Code Page No

BUSHES, LOCKNUTS, & LOCKRINGS - continuedDT33320Z V76320Z TLNUT20Z 9

DT33325Z V76325Z TLNUT25Z 9

DT33332Z V76332Z TLNUT32Z 9

DT33338Z V76338Z TLNUT11/2Z 9

DT33350Z V76350Z TLNUT2Z 9

DT33420Z V76420Z TLNUTH20Z 9

DT33425Z V76425Z TLNUTH25Z 9

DT33432Z V76432Z N/A 9

DT33438Z V76438Z N/A 9

DT33450Z V76450Z N/A 9

DT33520Z V76520Z TML20Z 9

DT33525Z V76525Z TML25Z 9

DT33532Z V76532Z TML32Z 9

DT33538Z V76538Z TML11/2Z 9

DT33550Z V76550Z TML2Z 9

SADDLES & CRAMPETSDT33620Z V75720Z TCRAM20Z 10

DT33625Z V75725Z TCRAM25Z 10

DT33720Z V75720TZ N/A 10

DT33725Z V75725TZ N/A 10

DT33820Z V75220Z THS20G 10

DT33825Z V75225Z THS25G 10

DT33832Z V75232Z N/A 10

DT33920Z V75320Z TCS20Z 10

DT33925Z V75325Z TCS25Z 10

DT33932Z V75332Z TCS32Z 10

DT33938Z V75338Z N/A 10

DT33950Z V75350Z N/A 10

DT34020Z V75420Z TSBS20Z 10

DT34025Z V75425Z TSBS25Z 10

DT34032Z V75432Z TSBS32Z 10

DT34038Z V75438Z N/A 10

DT34050Z V75450Z N/A 10

DT34120G V75520G THD20G 10

Deta TTECatalogue Code

VergloCatalogue Code

Top TubesCatalogue Code Page No

SADDLES & CRAMPETS - continuedDT34125G V75525G THDS25G 10

DT34132G V75532G THDS32G 10

DT34220G V75620G THPS20G 10

DT34225G V75625G THPS25G 10

DT34232G V75632G N/A 10

ADAPTABLE BOXESDT501332G V913KO332G TADB332KOG 11

DT501442G V913KO442G TADB442KOG 11

DT501443G V913KO443G TADB443KOG 11

DT501662G V913KO662G TADB662KOG 11

DT501663G V913KO663G TADB663KOG 11

DT501664G V913KO664G TADB664KOG 11

DT501994G V913KO994G TADB994KOG 11

DT50112124G V913KO12124G N/A 11

DT502332G V913P332G TADB332PG 11

DT502442G V913P442G TADB442PG 11

DT502443G V913P443G TADB443PG 11

DT502662G V913P662G TADB662PG 11

DT502663G V913P663G TADB663PG 11

DT502664G V913P664G TADB664PG 11

DT502994G V913P994G TADB994PG 11

DT50212124G V913P12124G N/A 11

STOCK, DIES & GUIDESDT6012025 V86020/25 TSDG20/25 11

DT60132 V86032 N/A 11

DT6022025 V860S42 TS42 11

DT60232 V860S63 N/A 11

DT60320 V860D20 TD20 11

DT60325 V860D25 TD25 11

DT60332 V860D32 N/A 11

DT60420 V860G20 TG20 11

DT60425 V860G25 TG25 11

DT60432 V860G32 N/A 11

DT615 N/A N/A 11

Deta TTECatalogue Code

VergloCatalogue Code

Top TubesCatalogue Code Description Length Per Bundle

CONDUITDT20300 N/A T204300 20mm x 3m Class 4 Conduit Tube GV 4

DT20375 N/A T204375 20mm x 3.75m Class 4 Conduit Tube GV 4

DT25300 N/A T254300 25mm x 3m Class 4 Conduit Tube GV 4

DT25375 N/A T254375 25mm x 3.75m Class 4 Conduit Tube GV 4

DTS20375 N/A TS204375 20mm x 3.75m Class 4 Conduit Tube GV 4

DTS25375 N/A TS254375 25mm x 3.75m Class 4 Conduit Tube GV 4

DTS32375 N/A TS324375 32mm x 3.75m Class 4 Conduit Tube GV 4

Deta TTE file for import to cat:Layout 1 21/12/12 14:55 Page 3

Page 16: Conduit & Fittingsdetaelectricaltest.co.uk/Deta TTE Catalogue.pdf · 2013. 10. 9. · Standard BS 4568 -1 Steel Conduit and fittings with metric threads Standard BS EN 61386 - 21

DETA TTE products have been used on many prestigious projects:

London Olympic Site Wembley Stadium

Dubai International Westfield Shopping Airport Centre

Deta Electrical Company LtdKingsway House

Laporte WayLutonBeds

LU4 8RJ

Telephone: +44 (0)1582 544 544Email: [email protected]

www.detaelectrical.co.uk

Deta Electrical is certified to ISO 9001 Quality Management System and

ISO 14001 Environmental Management System